A serum-free, cell-free culture system for development of bovine one-cell embryos up to blastocyst stage with improved viability

With the aim of developing a serum-free, cell-free culture system for embryo development, in vitro-matured (IVM) and -fertilized (IVF) bovine oocytes were cultured in TCM 199 with the following supplements: 1) BSA alone (10 mg/ml); 2) BSA with ITS (5 mug/ml insulin, 5 mug/ml transferrin and 5 ng/ml selenium; BSAITS medium); 3) estrous cow serum alone (ECS; 10%); or 4) ECS with BOEC (bovine oviduct epithelial cells) (Experiment 1). In Experiment 2, embryos were cultured in BSAITS medium with or without feeding with fresh medium on Day 4 (day of insemination = Day 0). Embryos were evaluated on Day 2 for first cleavage, on Day 7 for morulae and blastocysts, and on Day 8 for blastocysts. Blastocysts from Experiment 1 were frozen in 10% glycerol in PBS, thawed and further cultured in ECS medium with BOEC for 48 h, and evaluated for formation of a distinct blastocoel, or expansion and hatching of blastocysts. In vivo-developed, Grade-1 and Grade-2, 7-d-old embryos served as control for the freezing, thawing and subsequent culture procedures. The percentage of first cleavage did not differ between the treatments (74 to 79% in Experiment 1 and 80 to 83% in Experiment 2). The percentage of blastocysts developed in BSAITS medium did not differ from that in ECS medium whether BOEC were present or not. However, medium with BSA alone had fewer blastocysts than any other culture system (P<0.05). Feeding embryos with fresh BSAITS medium on Day 4 did not lead to any further increase in the proportion of blastocysts. The culture systems had a significant effect on the post-thaw viability of blastocysts developed in them (P<0.001). Blastocysts developed in BSAITS medium had better (P<0.05) viability (14/38) than those from medium with ECS alone (1/27) or with ECS and BOEC (3/37). The post-thaw survival of control embryos was 80% (n=30). One of the three transfers of BSAITS-treated, frozen-thawed blastocysts resulted in a pregnancy. The results indicate that a serum-free, cell-free culture system can support the development of IVM-IVF bovine oocytes up to the blastocyst stage with better viability than a complex co-culture system.     

Continuous Hydrolysis of Olive Oil by Lipase in Microporous Hydrophobic Hollow Fiber Bioreactor

Olive oil was hydrolyzed continuously at 40ºC by Candida cylindracea lipase in a small hollow fiber bioreactor (total area of hollow fibers was about 0.11 m²) in which the hollow fibers were made of microporous polypropylene. The lipase could be adsorbed easily onto oil-impregnated hollow fibers from its aqueous solution. The continuous feedings of olive oil inside the hollow fibers and of the buffer solution containing 18% glycerol as a stabilizer outside the hollow fibers were started after the enzyme-glycerol solution was removed from the bioreactor and the buffer-glycerol solution was added. An unvaried half life of 14 days of the adsorbed enzyme was observed when increasing amounts of the enzyme (1.0~5.0mg/ml) were put in, but its half-life was lowered to 6 days when the amount of the added enzyme was less (0.05mg/ml). Free enzymes in the enzyme solutions with and without 18% glycerol retained their initial activities equally for at least 3 months at temperatures below 4ºC. This suggests the feasibility of reuse of the enzyme-glycerol solution that was used in the preceding adsorption procedure after the solution was stored and supplemented with fresh enzyme. It was demonstrated by three successive cleanings and continuous hydrolyses that the used hollow fibers were regenerable. The productivity number was 0.81 mg-(unit)^-1 -h^-1, which was 26 times as great as that of the gel-entrapped lipase.     

BSA treatment to enhance enzymatic hydrolysis of cellulose in lignin containing substrates

Cellulase and bovine serum albumin (BSA) were added to Avicel cellulose and solids containing 56% cellulose and 28% lignin from dilute sulfuric acid pretreatment of corn stover. Little BSA was adsorbed on Avicel cellulose, while pretreated corn stover solids adsorbed considerable amounts of this protein. On the other hand, cellulase was highly adsorbed on both substrates. Adding a 1% concentration of BSA to dilute acid pretreated corn stover prior to enzyme addition at 15 FPU/g cellulose enhanced filter paper activity in solution by about a factor of 2 and beta-glucosidase activity in solution by about a factor of 14. Overall, these results suggested that BSA treatment reduced adsorption of cellulase and particularly beta-glucosidase on lignin. Of particular note, BSA treatment of pretreated corn stover solids prior to enzymatic hydrolysis increased 72 h glucose yields from about 82% to about 92% at a cellulase loading of 15 FPU/g cellulose or achieved about the same yield at a loading of 7.5 FPU/g cellulose. Similar improvements were also observed for enzymatic hydrolysis of ammonia fiber explosion (AFEX) pretreated corn stover and Douglas fir treated by SO(2) steam explosion and for simultaneous saccharification and fermentation (SSF) of BSA pretreated corn stover. In addition, BSA treatment prior to hydrolysis reduced the need for beta-glucosidase supplementation of SSF. The results are consistent with non-specific competitive, irreversible adsorption of BSA on lignin and identify promising strategies to reduce enzyme requirements for cellulose hydrolysis.     

Hydrolysis of butteroil by immobilized lipase using a hollow-fiber reactor: part I. lipase adsorption studies

Adsorption of proteins from a crude preparation containing a lipase from Aspergillus niger on microporous polypropylene hollow fibers was studied at six different temperatures. Langmuir isotherms accurately describe the overall adsorption equilibria. Lipase is selectively adsorbed relative to the other proteins in the crude preparation. Hence, immobilization also provides further purification of the lipase. The predictions of the Langmuir model for the change in the specific activity of lipase upon adsorption are consistent with experimental results. The loading capacity of the hollow fibers decreases and the adsorption constant increases as temperature is increased. This effect is more significant in the case of lipolytic activity than it is for the total amount of adsorbed protein. Small, positive enthalpy changes are associated with the adsorption of lipase on these hydrophobic membranes.     

Protamine immobilization and heparin adsorption on the protamine-bound cellulose fiber membrane

Immobilization of protamine to the inner lumen of cellulose hollow fibers has been shown useful in preventing both heparin- and protamine-induced complications during an extracorporeal blood circulation procedure. The current study examined the effects of variables on the immobilization of protamine to cyanogen bromide (CNBr)-activated cellulose hollow fibers. The degree of protamine immobilization was controlled by three independent parameters: the amount of CNBr used during the activation process, the duration of the coupling process, and the protamine concentration in the coupling solution. By the adjustment of these parameters, cellulose fibers containing desired amounts of immobilized protamine (ranging from 1 to 20 mg of immobilized protamine per gram of dry fibers) were readily prepared.Heparin adsorption to the protamine-bound cellulose fibers was also examined. The adsorption isotherm followed a Langmuir adsorption model. The amount of heparin adsorbed was dependent on both the heparin concentration in the substrate solution and the protamine loading on the fibers. The Langmuir adsorption constant K was estimated to be 0.37 +/- 0.06 mL/mg, whereas the saturation capacity Q(s) of the protamine-bound fibers increased with increasing the protamine loading.     

Adsorption of BSA on QAE-dextran: equilibria

Equilibrium isotherms for adsorption of bovine serum albumin (BSA) on a strong-base (QAE) dextran-type ion exchanger have been determined experimentally. They were not affected by the initial concentration of BSA but were affected by pH considerably. They were correlated by the Langmuir equation when pH >/= 5.05 and by the Freundlich equation of pH 4.8, which is close to pl approximately 4.8 of BSA. The contribution of ion exchange to adsorption of BSA on the ion exchanger was determined experimentally. The maximum amounts of inorganic anion exchanged for BSA were 1% and 0.4% of the exchange capacity of the ion exchanger at pH 6.9, respectively. Since the effect of the ion exchange on the adsorption appeared small, BSA may be adsorbed mainly by electrostatic attraction when pH >/= 5.05 and by hydrophobic interaction or hydrogen bonding at pH 4.8. When NaCl coexisted in the solution, the shape of the isotherm was similar to the Langmuir isotherm, but it is shifted to the right. When the concentration of NaCl was 0.2 mol/dm(3), BsA was not adsorbed on the resin. When BSA was dissolved in pure water, the saturation capacity of BSA on HPO(4) (2-),-orm resin was about 2 times larger than that for adsorption from the solution with buffer (pH 6.9 and 8.79). The saturation capacity for adsorption of BSA in pure water on HPO(4) (2-) + H(2)O(4) (-)-from resin was much smaller than that from the solution with buffer. The isotherms for univalent Cl(-)-and H(2)PO(4) (-)-form resin was peculiar; that is, the amount of BSA adsorbed decreased with increasing the liquid-phase equilibrium concentration of BSA. (c) 1993 John Wiley & Sons, Inc.     

Adsorption behavior of bovine serum albumin on lowly activated anionic exchangers suggests a new strategy for solid-phase proteomics

Diluted solutions of bovine serum albumin (BSA) (e.g., 0.1 mg /mL) do not form detectable protein large aggregates. Using gel-filtration experiments, we determined that a diluted solution of BSA is 97% monomeric BSA and 3% dimeric. The adsorption of this diluted BSA on highly activated anionic exchangers (e,g., having 40 micromol/wet g) keeps this mainly monomeric form. When supports activated with 2 micromol/wet g are used, only dimers become adsorbed to the support, accounting for 100% of the offered BSA. When the diluted BSA solution is offered to very mildly activated anionic exchangers (even only 0.125 micromol/wet g), an unexpected adsorption of most of the BSA on the support was also observed. These very slightly activated supports are only able to adsorb very large proteins or very large protein-protein complexes, larger than BSA dimers. In fact, a rapid cross-linking of the adsorbed BSA with dextran-aldehyde reveals the formation of very large BSA-BSA complexes with molecular mass higher than 500 000 Da, complexes that may be observed for soluble BSA with very high concentrations but are not detectable at 0.1 mg/mL. Moreover, the size of the aggregates strongly depends on the concentration of the ionized groups on the support: the less activated the supports are, the higher the sizes of the complexes. It seems that the interaction of the BSA molecules on the margins of the BSA aggregate with the groups on the support may stabilize the whole protein aggregate, although some components are not interacting with the support. Aggregates could account for more than 40% of the BSA in the solution after 50 h of incubation. However, only these large BSA aggregates were adsorbed in the support.     

BSA Adsorption on Porous Scaffolds Prepared from BioPEGylated Poly(3-Hydroxybutyrate)

Porous scaffolds for tissue engineering have been prepared from poly(3-hydroxybutyrate) (PHB) and a copolymer of poly(3-hydroxybutyrate) and polyethylene glycol (PHB-PEG) produced by bioPEGylation. The morphology of the scaffolds and their capacity for adsorption of the model protein bovine serum albumin (BSA) have been studied. Scaffolds produced from bioPEGylated PHB adsorbed more BSA, whereas the share of protein irreversibly adsorbed on these scaffolds was significantly lower (33%) than in the case of PHB homopolymer-based scaffolds (47%). The effect of protein adsorption on scaffold biocompatibility in vitro was tested in an experiment that involved the cultivation of fibroblasts (line COS-1) on the scaffolds. PHB-PEG scaffolds had a higher capacity for supporting cell growth than PHB-based scaffolds. Thus, the bioPEGylated PHB-based polymer scaffolds developed in the present study have considerable potential for use in soft tissue engineering.     

界面上配基种类对BSA吸附行为的影响

利用双偏振极化干涉测量仪(DPI)研究了界面上配基种类对BSA吸附行为的影响。采用3-氨基丙基三乙氧基硅烷(APTES)、3-(甲氨基)丙基三甲氧基硅烷(MAPTMS)和N,N-二乙基-3-氨基丙基三甲氧基硅烷(DAPTMS)对DPI芯片进行了修饰,利用X射线光电子能谱比较了芯片上不同配基的密度,采用原子力显微镜(AFM)和DPI对界面上BSA吸附行为进行了研究。结果表明APTES修饰界面上BSA呈饼状,高配基密度易导致BSA多位点吸附。相同偶联密度条件下BSA在DAPTMS修饰芯片的吸附量高于MAPTMS修饰芯片,但吸附层厚度一致,表明DAPTMS表面上BSA存在聚集现象;AFM扫描结果与DPI分析结果一致,证明了配基密度和种类不仅影响界面上蛋白质吸附量,而且影响蛋白质吸附密度和表面聚集行为。     

A quantitative and selective chromatography method for determining coverages of multiple proteins on surfaces

Competitive protein adsorption plays a key role in the surface hemocompatibility of biological implants. We describe a quantitative chromatography method to measure the coverage of multiple proteins physisorbed to surfaces. In this method adsorbed proteins are displaced by CHAPS (3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate) and then analyzed by high performance liquid chromatography to separate and quantify the individual proteins, in this case bovine serum albumin (BSA) and bovine fibrinogen (Fg). CHAPS displaced over 95% of the adsorbed proteins and was easily removed from solution by dialysis. This method was tested by measuring the coverage of BSA, 66 kDa, and Fg, 340 kDa, simultaneously adsorbed from solutions with concentration of 20 microg/ml, on bare and dextranized silicon. Relative to silicon, the dextranized surfaces were found to strongly inhibit protein adsorption, decreasing BSA and Fg coverages by 76 and 60%, respectively.     

In vitro maturation, fertilization and culture to blastocysts of bovine oocytes in protein-free media

This study examined the role of protein supplementation at the various steps of the in vitro production of bovine embryos derived from two different morphological categories of COC. The basic medium was TCM 199 and was supplemented with hormones during maturation in vitro and either estrous cow serum (ECS), bovine serum albumin (BSA) at various concentrations or polyvinyl-alcohol (PVA). Fertilization in vitro was carried out using frozen-thawed semen or one bull in Fert-talp containing heparin, hypotaurin and epinephrine and either 6 mg/ml BSA or 1 mg/ml PVA. In vitro culture up to the blastocyst stage was performed in TCM 199 supplemented with either ECS, BSA or PVA. The first experiment investigated the influence of different medium-supplements (ECS, BSA or PVA) on nuclear maturation and revealed no significant differences among treatment groups nor between categories of COC (63.9% to 74.9% and 48.9% to 77.0%, respectively). The time course of in vitro fertilization was elucidated in Experiment 2 in medium supplemented with either protein or PVA during maturation and fertilization. Penetration was not affected (70.9% to 79.3% penetration 12 h after onset of oocyte-sperm-co-incubation), but formation of pronuclei was decreased (P < 0.05) 12 and 19 h after onset of oocyte-sperm-co-incubation and was retarded in medium supplemented with PVA (12 h: 63.8 vs 21.4 %; 19 h: 57.5 vs 20.8 %, respectively) while cleavage was not affected. In Experiment 3, six treatment groups were formed in which the two different morphological categories of cumulus-oocyte-complexes (COC) were incubated in basic medium supplemented with 1) ECS during maturation and embryo culture and BSA during fertilization; 2) PVA during maturation and embryo culture, fertilization medium with PVA; 3) PVA during maturation and embryo culture, fertilization medium with BSA; 4) BSA (1 mg/ml) during maturation, fertilization and embryo culture; 5) BSA (6 mg/ml) during maturation, fertilization and embryo culture; and 6) BSA (10 mg/ml) during maturation, fertilization and embryo culture. The rates of cleavage and the development to morulae or blastocysts did not differ (P > 0.05) among treatment groups and between both categories of COC and were showing a high degree of variability (cleavage 54.0% to 65.1% and 41.3% to 55.7%, respectively; morulae 25.3% to 53.0% and 26.0% to 51.2%, respectively; blastocysts 5.4% to 24.7% and 0.6% to 20.3%, respectively). Parthenogenetic activation only rarely occurred in medium containing PVA throughout all steps of in vitro production of bovine embryos (Experiment 4) and led to early cleavage stages (8%), but no development to morula- or blastocyst-stages was observed. It is concluded that 1) formation of pronuclei was retarded in medium lacking protein-supplementation, indicating that BSA is required for regular fertilization in vitro and 2) under our experimental conditions, protein-supplementation is not necessary for maturation and development up to the blastocyst stage in vitro.     

Rapid concentration and dialysis of proteins with single hollow fibers: possible applications in analysis of protein secretion by isolated cells and steroid radioimmunoassays

Single hollow fibers were used in specially made cells for fast concentration and dialysis of solutions containing macromolecules. Volumes on the order of 5 ml of diluted protein solutions could be concentrated to 50–100 μl or less within 7 min with a protein recovery of 60–80%. More than 99% of the molecules with a molecular weight less than 500 could be removed in less than 1 hr. A possible application of the rapid dialysis method for the mechanization of radioimmunoassays is indicated. It was shown that in the radioimmunoassay of steroids the unbound steroids could be removed after incubation with antiserum, within 10 min and without a change in volume.     

Novel thymine-functionalized polystyrenes for applications in biotechnology. 2. Adsorption of model proteins

This paper investigates the adsorption of bovine serum albumin (BSA) and bovine hemoglobin (BHb) model proteins onto novel thymine-functionalized polystyrene (PS-VBT) microspheres, in comparison with polystyrene (PS) microspheres. Maximum adsorption was obtained for both proteins near their corresponding isoelectric points (pI at pH = 4.7 for BSA and 7.1 for BHb). FTIR and adsorption isotherm analysis demonstrated that, although both proteins were physisorbed onto PS through nonspecific hydrophobic interactions, adsorption onto the functionalized copolymers occurred by both physisorption and chemisorption via hydrogen bonding. FTIR analysis also indicated conformational changes in the secondary structure of BSA and BHb adsorbed onto PS, whereas little or no conformation change was seen in the case of adsorption onto PS-VBT. Atomic force microscopy (AFM), consistent with the isotherm results, also demonstrated monolayer adsorption for both proteins. AFM images of BSA adsorbed onto copolymers with 20 mol % surface VBT loading showed exclusively end-on orientation. Adsorption onto copolymers with lower functionality showed mixed end-on and side-on orientation modes of BSA, and only the side-on orientation was observed on PS. The AFM results agreed well with theoretically calculated and experimentally obtained adsorption capacities. AFM together with calculated and observed adsorption capacity data for BHb indicated that this protein might be highly compressed on the copolymer surface. Adsorption from a binary mixture of BSA and BHb onto PS-VBT showed good separation at pH=7.0; approximately 90% of the adsorbed protein was BHb. The novel copolymers have potential applications in biotechnology.     

Development and application of new positively charged filters for recovery of bacteriophages from water.

Electronegative and electropositive filters were compared for the recovery of indigenous bacteriophages from water samples, using the VIRADEL technique. Fiber glass and diatomaceous earth filters displayed low adsorption and recovery, but an important increase of the adsorption percentage was observed when the filters were treated with cationic polymers (about 99% adsorption). A new methodology of virus elution was developed in this study, consisting of the slow passage of the eluent through the filter, thus increasing the contact time between eluent and virus adsorbed on the filters. The use of this technique allows a maximum recovery of 71.2% compared with 46.7% phage recovery obtained by the standard elution procedure. High percentages (over 83%) of phage adsorption were obtained with different filters from 1-liter aliquots of the samples, except for Virosorb 1-MDS filters (between 1.6 and 32% phage adsorption). Phage recovery by using the slow passing of the eluent depended on the filter type, with recovery ranging between 1.6% for Virosorb 1-MDS filters treated with polyethyleneimine and 103.2% for diatomaceous earth filters treated with 0.1% Nalco.     

Preparation and characterization of amphiphilic triblock terpolymer-based nanofibers as antifouling biomaterials

Antifouling surfaces are critical for the good performance of functional materials in various applications including water filtration, medical implants, and biosensors. In this study, we synthesized amphiphilic triblock terpolymers (tri-BCPs, coded as KB) and fabricated amphiphilic nanofibers by electrospinning of solutions prepared by mixing the KB with poly(lactic acid) (PLA) polymer. The resulting fibers with amphiphilic polymer groups exhibited superior antifouling performance to the fibers without such groups. The adsorption of bovine serum albumin (BSA) on the amphiphilic fibers was about 10-fold less than that on the control surfaces from PLA and PET fibers. With the increase of the KB content in the amphiphilic fibers, the resistance to adsorption of BSA was increased. BSA was released more easily from the surface of the amphiphilic fibers than from the surface of hydrophobic PLA or PET fibers. We have also investigated the structural conformation of KB in fibers before and after annealing by contact angle measurements, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and coarse-grained molecular dynamics (CGMD) simulation to probe the effect of amphiphilic chain conformation on antifouling. The results reveal that the amphiphilic KB was evenly distributed within as-spun hybrid fibers, while migrated toward the core from the fiber surface during thermal treatment, leading to the reduction in antifouling. This suggests that the antifouling effect of the amphiphilic fibers is greatly influenced by the arrangement of amphiphilic groups in the fibers.     

Development and application of new positively charged filters for recovery of bacteriophages from water

Electronegative and electropositive filters were compared for the recovery of indigenous bacteriophages from water samples, using the VIRADEL technique. Fiber glass and diatomaceous earth filters displayed low adsorption and recovery, but an important increase of the adsorption percentage was observed when the filters were treated with cationic polymers (about 99% adsorption). A new methodology of virus elution was developed in this study, consisting of the slow passage of the eluent through the filter, thus increasing the contact time between eluent and virus adsorbed on the filters. The use of this technique allows a maximum recovery of 71.2% compared with 46.7% phage recovery obtained by the standard elution procedure. High percentages (over 83%) of phage adsorption were obtained with different filters from 1-liter aliquots of the samples, except for Virosorb 1-MDS filters (between 1.6 and 32% phage adsorption). Phage recovery by using the slow passing of the eluent depended on the filter type, with recovery ranging between 1.6% for Virosorb 1-MDS filters treated with polyethyleneimine and 103.2% for diatomaceous earth filters treated with 0.1% Nalco.     

大孔树脂固定化脂肪酶及在微水相中催化合成生物柴油的研究

以不同大孔树脂吸附法固定化假丝酵母99_125脂肪酶,在微水有机相中的应用表明非极性树脂NKA是最佳的固定化载体。分别以正庚烷及磷酸盐缓冲液作为固定化介质,发现在正庚烷介质中树脂NKA的固定化效率能够达到98.98%,与采用磷酸盐缓冲液作为介质相比,固定化酶的水解活力和表观酶活回收率分别提高了4.07和3.43倍。考察了在微水相中固定化酶催化合成生物柴油的催化性能,结果表明,在给酶量为1.92∶1(初始酶粉与树脂的质量比),pH值为7.4,体系水含量为15%(水与油的质量比),反应温度为40℃条件下,固定化酶具有最佳的催化能力;以正庚烷为介质固定化脂肪酶催化合成生物柴油,采用三次流加甲醇的方式,单批转化率最高达到97.3%,连续反应19批以后转化率仍保持为70.2%。     

Adsorption characteristics of an immobilized metal affinity membrane.

An immobilized metal affinity (IMA) hollow-fiber membrane was prepared by radiation-induced graft polymerization of glycidyl methacrylate (GMA) onto a porous polyethylene hollow fiber, followed by chemical conversion of the produced epoxide group into an iminodiacetate (IDA) group and its chelation with copper(II) ion. The IDA hollow fiber, whose degree of GMA grafting was 120%, was found to retain 0.42 mol of Cu ion/kg of dry weight of the resulting IMA hollow fiber. The pure water flux of the affinity membrane was 0.90 m/h at a filtration pressure of 1 x 10(5) Pa. The 0.1 g/L L-histidyl-L-leucine (His-Leu) solution permeated across the IMA hollow fiber, whose inner diameter and thickness were 0.78 and 0.365 mm, respectively, at a prescribed filtration pressure ranging from 0.2 x 10(5) to 1.0 x 10(5) Pa. The adsorption of His-Leu during permeation of the solution showed that the overall adsorption rate was independent of the filtration pressure, i.e., the residence time, because of the negligible diffusional resistance of His-Leu to the pseudobioaffinity ligand located on the pore surface of the membrane. No deterioration in the adsorption capacity was observed after five cycles of His-Leu adsorption, its elution, and reimmobilization of copper. The adsorption isotherm of bovine serum albumin (BSA) on the IMA hollow fiber was measured and compared with that for the conventional agarose-based bead containing the IDA-Cu ligand.(ABSTRACT TRUNCATED AT 250 WORDS)     

LiCl-induced improvement of multilayer nanofibrous lipase for biodiesel synthesis

A unique method that applied a multilayer-immobilization strategy was developed to prepare nanofibrous enzymes for biosynthesis. LiCl co-electrospun with polyurethane nanofibers enabled strong physical adsorption of bovine serum albumin (BSA), forming the first layer of protein on the nanofibers; lipase AK was subsequently crosslinked to BSA as an outer layer of enzyme. The content of LiCl in nanofibers was found to be a sensitive factor affecting the activity and stability of the immobilized lipase. For biodiesel synthesis from soybean oil and methanol in isooctane, the reaction rate catalyzed by nanofibrious lipase carrying 5 wt% LiCl was 6.6-fold higher than fibers without LiCl, with a conversion of 91% was achieved within 2 h. LiCl also induced much improved enzyme stability. The nanofibrous lipase with 5% LiCl could be repeatedly used for 42 cycles without apparent activity loss, while the immobilized lipase without LiCl lost over 90% activity within 13 reuse cycles.     

Co-culture of stromal and erythroleukemia cells in a perfused hollow fiber bioreactor system as an in vitro bone marrow model for myeloid leukemia

We have developed a hematopoietic co-culture system using the hollow fiber bioreactor (HFBR) as a potential in vitro bone marrow model for evaluating leukemia. Supporting stroma using HS-5 cells was established in HFBR system and the current bioprocess configuration yielded an average glucose consumption of 640 mg/day and an average protein concentration of 6.40 mg/mL in the extracapillary space over 28 days. Co-culture with erythroleukemia K562 cells was used as a model for myelo-leukemic cell proliferation and differentiation. Two distinct localizations of K562 cells (loosely adhered and adherent cells) were identified and characterized after 2 weeks. The HFBR co-culture resulted in greater leukemic cell expansion (3,130 fold vs. 43 fold) compared to a standard tissue culture polystyrene (TCP) culture. Majority of expanded cells (68%) in HFBR culture were the adherent population, highlighting the importance of cell-cell contact for myelo-leukemic proliferation. Differentiation tendencies in TCP favored maturation toward monocyte and erythrocyte lineages but maintained a pool of myeloid progenitors. In contrast, HFBR co-culture exhibited greater lineage diversity, stimulating monocytic and megakaryocytic differentiation while inhibiting erythroid maturation. With the extensive stromal expansion capacity on hollow fiber surfaces, the HFBR system is able to achieve high cell densities and 3D cell-cell contacts mimicking the bone marrow microenvironment. The proposed in vitro system represents a dynamic and highly scalable 3D co-culture platform for the study of cell-stroma dependent hematopoietic/leukemic cell functions and ex vivo expansion.