A molecular dynamics study of an L-type calcium channel model

In this work, we propose a molecular model of the L-type calcium channel pore from the human cardiac alpha1 subunit. Four glutamic acid residues, the EEEE locus, located at highly conserved P loops (also called SS1-SS2 segments) of the alpha1 subunit, molecularly express the calcium channel selectivity. The proposed alpha-helix structure for the SS1 segment, analyzed through molecular dynamics simulations in aqueous-phase, was validated by the plotting of Ramachandran diagrams for the averaged structures and by the analysis of i and i + 4 helical hydrogen bonding between the amino acid residues. The results of the simulation of the calcium channel model with one and two Ca2+ ions at the binding site are in accordance with mutation studies which suggest that the EEEE locus in the L-type calcium channel must form a single high-affinity binding site. These results suggest that the Ca2+ permeation through the channel would be derived from competition between two ions for the only high-affinity binding site. Furthermore, the experimentally observed blocking of the Na+ flux at micromolar Ca2+ concentrations, probably due to the occupancy of the single high-affinity binding site for one Ca2+, was also reproduced by our model.     

Molecular architecture of the voltage-dependent Na channel: functional evidence for alpha helices in the pore

The permeation pathway of the Na channel is formed by asymmetric loops (P segments) contributed by each of the four domains of the protein. In contrast to the analogous region of K channels, previously we (Yamagishi, T., M. Janecki, E. Marban, and G. Tomaselli. 1997. Biophys. J. 73:195-204) have shown that the P segments do not span the selectivity region, that is, they are accessible only from the extracellular surface. The portion of the P-segment NH(2)-terminal to the selectivity region is referred to as SS1. To explore further the topology and functional role of the SS1 region, 40 amino acids NH(2)-terminal to the selectivity ring (10 in each of the P segments) of the rat skeletal muscle Na channel were substituted by cysteine and expressed in tsA-201 cells. Selected mutants in each domain could be blocked with high affinity by externally applied Cd(2)+ and were resistant to tetrodotoxin as compared with the wild-type channel. None of the externally applied sulfhydryl-specific methanethiosulfonate reagents modified the current through any of the mutant channels. Both R395C and R750C altered ionic selectivity, producing significant increases in K(+) and NH(4)(+) currents. The pattern of side chain accessibility is consistent with a pore helix like that observed in the crystal structure of the bacterial K channel, KcsA. Structure prediction of the Na channel using the program PHDhtm suggests an alpha helix in the SS1 region of each domain channel. We conclude that each of the P segments undergoes a hairpin turn in the permeation pathway, such that amino acids on both sides of the putative selectivity filter line the outer mouth of the pore. Evolutionary conservation of the pore helix motif from bacterial K channels to mammalian Na channels identifies this structure as a critical feature in the architecture of ion selective pores.     

Characterization of the selectivity filter of the epithelial sodium channel

The epithelial sodium channel (ENaC) is composed of three homologous subunits termed alpha, beta, and gamma. Previous studies suggest that selected residues within a hydrophobic region immediately preceding the second membrane-spanning domain of each subunit contribute to the conducting pore of ENaC. We probed the pore of mouse ENaC by systematically mutating all 24 amino acids within this putative pore region of the alpha-subunit to cysteine and co-expressing these mutants with wild type beta- and gamma-subunits of mouse ENaC in Xenopus laevis oocytes. Functional characteristics of these mutants were examined by two-electrode voltage clamp and single channel recording techniques. Two distinct domains were identified based on the functional changes associated with point mutations. An amino-terminal domain (alpha-Val(569)-alpha-Gly(579)) showed minimal changes in cation selectivity or amiloride sensitivity following cysteine substitution. In contrast, cysteine substitutions within the carboxyl-terminal domain (alpha-Ser(580)-alpha-Ser(592)) resulted in significant changes in cation selectivity and moderately altered amiloride sensitivity. The mutant channels containing alphaG587C or alphaS589C were permeable to K(+), and mutation of a GSS tract (positions alpha587-alpha589) to GYG resulted in a moderately K(+)-selective channel. Our results suggest that the C-terminal portion of the pore region within the alpha-subunit contributes to the selectivity filter of ENaC.     

修饰的含前S1、前S2免疫决定簇乙肝表面抗原融合多肽在毕赤酵母中的共表达

用BamHⅠ和BglⅡ双酶切含SS2嵌合基因片段的重组质粒pAO815-SS2,分离含AOX1启动子区、SS2嵌合基因和AOX1转录终止序列的表达盒。将分离的BamHⅠ-BglⅡ表达盒与经BamHⅠ线性化的pAO815-SS1质粒连接,转化大肠杆菌Top10F′,提取质粒,用BamHⅠ和BglⅡ双酶切分析重组质粒并筛选正向插入SS2表达盒的重组子。将该重组质粒用电转化法导入PichiapastorisGS115细胞,经表型筛选、小试表达和产物鉴定,构建了重组表达菌株GS115-SS1S2。重组菌株经甲醇诱导后制备抗原粗提液,进一步进行ELISA和Westernblot鉴定。ELISA结果显示,产物同时具有S、前S1和前S2抗原性。Westernblot分析进一步表明,表达产物既能与S抗体结合,也能与前S1和前S2抗体结合。工程菌经高密度发酵,表达量达到300~600mg/L。抗原经纯化后进行电镜观察,形成直径20~35nm的球形颗粒。纯化抗原经SDS-PAGE分析,SS1和SS2多肽仍然保持完整,基本无降解。     

Topology of the P segments in the sodium channel pore revealed by cysteine mutagenesis.

The P segments of the voltage-dependent Na+ channel line the outer mouth and selectivity filter of the pore. The residues that form the cytoplasmic mouth of the pore of the channel have not been identified. To study the structure of the inner pore mouth, the presumed selectivity filter residues (D400, E755, K1237, and A1529), and three amino acids just amino-terminal to each of these residues in the rat skeletal muscle Na+ channel, were mutated to cysteine and expressed in tsA 201 cells. These amino acids are predicted (by analogy to K+ channels) to be on the cytoplasmic side of the putative selectivity filter residues. Inward and outward Na+ currents were measured with the whole-cell configuration of the patch-clamp technique. Cysteinyl side-chain accessibility was gauged by sensitivity to Cd2+ block and by reactivity with methanethiosulfonate (MTS) reagents applied to both the inside and the outside of the cell. Outward currents through the wild-type and all of the mutant channels were unaffected by internal Cd2+ (100 microM). Similarly, 1 mM methanethiosulfonate ethylammonium (MTSEA) applied to the inside of the membrane did not affect wild-type or mutant outward currents. However, two mutants amino-terminal to the selectivity position in domain III (F1236C and T1235C) and one in domain IV (S1528C) were blocked with high affinity by external Cd2+. The Na+ current through F1236C and S1528C channels was inhibited by MTSEA applied to the outside of the cell. The accessibility of these mutants to externally applied cysteinyl ligands indicates that the side chains of the mutated residues face outward rather than inward. The K+ channel model of the P segments as protein loops that span the selectivity region is not applicable to the Na+ channel.     

Mechanism and molecular determinant for regulation of rabbit transient receptor potential type 5 (TRPV5) channel by extracellular pH

The transient receptor potential type 5 (TRPV5) channel is present in kidney and intestine and important for transepithelial (re)absorption of calcium in these tissues. We report that in whole-cell patch clamp recording extracellular acidification inhibited rabbit TRPV5 with apparent pKa approximately 6.55. The two extracellular loops between the fifth and sixth transmembrane segments of TRPV5 presumably form part of the outer opening of the pore and likely are important in binding and regulation by external protons. We found that mutation of glutamate 522 to glutamine (E522Q) decreased the sensitivity of the channel to extracellular acidification. Mutations of other titratable amino acids within the two extracellular loops to non-titratable amino acids had no effect on pH sensitivity. Substitutions of aspartate or other titratable amino acids for glutamate 522 conferred an increase in pH sensitivity. The pH sensitivity mediated by glutamate 522 was independent of extracellular or intracellular Mg2+. Single channel analysis revealed that extracellular acidification reduced single channel conductance as well as open probability of the wild type channel. In contrast to wild type channel, extracellular acidification did not reduce open probability for E522Q mutant. Methanethiosulfonate reagents inhibited the activity of glutamine 522 to cysteine mutant channel with a reaction rate constant approaching that with free thiols in solution, suggesting that glutamate 522 is located on the surface of the channel. These data suggest that glutamate 522 of the rabbit TRPV5 is a "pH sensor," and extracellular protons inhibit TRPV5 likely by altering conformation of the channel protein.     

The unusual suspects: Regulation of retinal calcium channels by somatostatin

Calcium channel family members activate at different membrane potentials which enables tissue specific calcium entry. Pore mutations affecting this voltage dependence are associated with channelopathies. In this review we analyze the link between voltage sensitivity and corresponding kinetic phenotypes of calcium channel activation. Systematic changes in hydrophobicity in the lower third of S6 segments gradually shift the activation curve thereby determining the voltage sensitivity. Homology modeling suggests that hydrophobic residues that are located in all four S6 segments close to the inner channel mouth might form adhesion points stabilizing the closed gate. Simulation studies support a scenario where voltage sensors and the pore are essentially independent structural units. We speculate that evolution designed the voltage sensing machinery as robust "all-or-non" device while the verity of voltage sensitivities of different channel types was accomplished by shaping pore stability.     

Pore stability and gating in voltage-activated calcium channels

Calcium channel family members activate at different membrane potentials, which enables tissue specific calcium entry. Pore mutations affecting this voltage dependence are associated with channelopathies. In this review we analyze the link between voltage sensitivity and corresponding kinetic phenotypes of calcium channel activation. Systematic changes in hydrophobicity in the lower third of S6 segments gradually shift the activation curve thereby determining the voltage sensitivity. Homology modeling suggests that hydrophobic residues that are located in all four S6 segments close to the inner channel mouth might form adhesion points stabilizing the closed gate. Simulation studies support a scenario where voltage sensors and the pore are essentially independent structural units. We speculate that evolution designed the voltage sensing machinery as robust "all-or-non" device while the varietys of voltage sensitivities of different channel types was accomplished by shaping pore stability.     

A molecular model of the inner pore of the Ca channel in its open state

Structure of the Ca channel open pore is unlikely to be the same as that of the K channel because Ca channels do not contain the hinge residues Gly or Pro. The Ca channel does not have a wide entry into the inner pore, as is found in K channels. First we sought to simulate the open state of the Ca channel by modeling forced opening of the KcsA channel using a procedure of restrained minimization with distance constraints at the level of the α-helical bundle, corresponding to segments Thr-107-Val-115. This produced an intermediate open state, which was populated by amino acid residues of Ca channels and then successively optimized until the opening of the pore reached a diameter of about 10 Å, large enough to allow verapamil to enter and block the Ca channel from inside. Although this approach produced a sterically plausible structure, it was in significant disagreement with the MTSET accessibility data for single cysteine mutations of S6 segments of the P/Q channel¹ that do not fit with an α-helical pattern. Last we explored the idea that the four S6 segments of Ca channels may contain intra-molecular deformations that lead to reorientation of its side chains. After introduction of π-bulges, the model agreed with the MTSET accessibility data. MTSET modification of a cysteine at the C-end of only one S6 could produce physical occlusion and block of the inner pore of the open Ca channel, as observed experimentally, and as expected if the pore opening is narrower than that of K channels.Key words: calcium channels, homology modeling, π-bulges, restrained minimization     

Glutamate substitution in repeat IV alters divalent and monovalent cation permeation in the heart Ca2+ channel.

In voltage-gated ion channels, residues responsible for ion selectivity were identified in the pore-lining SS1-SS2 segments. Negatively charged glutamate residues (E393, E736, E1145, and E1446) found in each of the four repeats of the alpha 1C subunit were identified as the major determinant of selectivity in Ca2+ channels. Neutralization of glutamate residues by glutamine in repeat I (E393Q), repeat III (E1145Q), and repeat IV (E1446Q) decreased the channel affinity for calcium ions 10-fold from the wild-type channel. In contrast, neutralization of glutamate residues in repeat II failed to significantly alter Ca2+ affinity. Likewise, mutation of neighboring residues in E1149K and D1450N did not affect the channel affinity, further supporting the unique role of glutamate residues E1145 in repeat III and E1446 in repeat IV in determining Ca2+ selectivity. Conservative mutations E1145D and E1446D preserved high-affinity Ca2+ binding, which suggests that the interaction between Ca2+ and the pore ligand sites is predominantly electrostatic and involves charge neutralization. Mutational analysis of E1446 showed additionally that polar residues could achieve higher Ca2+ affinity than small hydrophobic residues could. The role of high-affinity calcium binding sites in channel permeation was investigated at the single-channel level. Neutralization of glutamate residue in repeats I, II, and III did not affect single-channel properties measured with 115 mM BaCl2. However, mutation of the high-affinity binding site E1446 was found to significantly affect the single-channel conductance for Ba2+ and Li+, providing strong evidence that E1446 is located in the narrow region of the channel outer mouth. Side-chain substitutions at 1446 in repeat IV were used to probe the nature of divalent cation-ligand interaction and monovalent cation-ligand interaction in the calcium channel pore. Monovalent permeation was found to be inversely proportional to the volume of the side chain at position 1446, with small neutral residues such as alanine and glycine producing higher Li+ currents than the wild-type channel. This suggests that steric hindrance is a major determinant for monovalent cation conductance. Divalent permeation was more complex. Ba2+ single-channel conductance decreased when small neutral residues such as glycine were replaced by bulkier ones such as glutamine. However, negatively charged amino acids produced single-channel conductance higher than predicted from the size of their side chain. Hence, negatively charged residues at position 1446 in repeat IV are required for divalent cation permeation.     

Membrane topology of ABC-type macrolide antibiotic exporter MacB in Escherichia coli

MacB is an ABC-type membrane protein that exports only macrolide compounds containing 14- and 15-membered lactones, cooperating with a membrane fusion protein, MacA, and a multifunctional outer membrane channel, TolC. We determined the membrane topology of MacB by means of site-specific competitive chemical modification of single cysteine mutants. As a result, it was revealed that MacB is composed of four transmembrane (TM) segments with a cytoplasmic N-terminal nucleotide binding domain of about 270 amino acid residues and a periplasmic large hydrophilic polypeptide between TM segments 1 and 2 of about 200 amino acid residues.     

A gating mutation in the internal pore of ASIC1a

Using a substituted cysteine accessibility scan, we have investigated the structures that form the internal pore of the acid-sensing ion channel 1a. We have identified the amino acid residues Ala-22, Ile-33, and Phe-34 in the amino terminus and Arg-43 in the first transmembrane helix, which when mutated into cysteine, were modified by intracellular application of MTSET, resulting in channel inhibition. The inhibition of the R43C mutant by internal MTSET requires opening of the channel. In addition, binding of Cd2+ ions to R43C slows the channel inactivation. This indicates that the first transmembrane helix undergoes conformational changes during channel inactivation. The effect of Cd2+ on R43C can be obtained with Cd2+ applied at either the extracellular or the intracellular side, indicating that R43C is located in the channel pore. The block of the A22C, I33C, and F34C mutants by MTSET suggests that these residues in the amino terminus of the channel also participate to the internal pore.     

Secondary structure and gating rearrangements of transmembrane segments in rat P2X4 receptor channels

P2X receptors are cation selective channels that are activated by extracellular nucleotides. These channels are likely formed by three identical or related subunits, each having two transmembrane segments (TM1 and TM2). To identify regions that undergo rearrangement during gating and to probe their secondary structure, we performed tryptophan scanning mutagenesis on the two putative TMs of the rat P2X4 receptor channel. Mutant channels were expressed in Xenopus oocytes, concentration-response relationships constructed for ATP, and the EC50 estimated by fitting the Hill equation to the data. Of the 22 mutations in TM1 and 24 in TM2, all but one in TM1 and seven in TM2 result in functional channels. Interestingly, the majority of the functional mutants display an increased sensitivity to ATP, and in general these perturbations are more pronounced for TM2 when compared with TM1. For TM1 and for the outer half of TM2, the perturbations are consistent with these regions adopting alpha-helical secondary structures. In addition, the greatest perturbations in the gating equilibrium occur for mutations near the outer ends of both TM1 and TM2. Surface biotinylation experiments reveal that all the nonfunctional mutants traffic to the surface membrane at levels comparable to the WT channel, suggesting that these mutations likely disrupt ion conduction or gating. Taken together, these results suggest that the outer parts of TM1 and TM2 are helical and that they move during activation. The observation that the majority of nonconducting mutations are clustered toward the inner end of TM2 suggests a critical functional role for this region.     

Elucidation of the molecular basis of selective recognition uncovers the interaction site for the core domain of scorpion alpha-toxins on sodium channels

Neurotoxin receptor site-3 at voltage-gated Na(+) channels is recognized by various peptide toxin inhibitors of channel inactivation. Despite extensive studies of the effects of these toxins, their mode of interaction with the channel remained to be described at the molecular level. To identify channel constituents that interact with the toxins, we exploited the opposing preferences of LqhαIT and Lqh2 scorpion α-toxins for insect and mammalian brain Na(+) channels. Construction of the DIV/S1-S2, DIV/S3-S4, DI/S5-SS1, and DI/SS2-S6 external loops of the rat brain rNa(v)1.2a channel (highly sensitive to Lqh2) in the background of the Drosophila DmNa(v)1 channel (highly sensitive to LqhαIT), and examination of toxin activity on the channel chimera expressed in Xenopus oocytes revealed a substantial decrease in LqhαIT effect, whereas Lqh2 was as effective as at rNa(v)1.2a. Further substitutions of individual loops and specific residues followed by examination of gain or loss in Lqh2 and LqhαIT activities highlighted the importance of DI/S5-S6 (pore module) and the C-terminal region of DIV/S3 (gating module) of rNa(v)1.2a for Lqh2 action and selectivity. In contrast, a single substitution of Glu-1613 to Asp at DIV/S3-S4 converted rNa(v)1.2a to high sensitivity toward LqhαIT. Comparison of depolarization-driven dissociation of Lqh2 and mutant derivatives off their binding site at rNa(v)1.2a mutant channels has suggested that the toxin core domain interacts with the gating module of DIV. These results constitute the first step in better understanding of the way scorpion α-toxins interact with voltage-gated Na(+)-channels at the molecular level.     

Biphasic currents evoked by chemical or thermal activation of the heat-gated ion channel, TRPV3

2-Aminoethyl diphenylborinate was recently identified as a chemical activator of TRPV1, TRPV2, and TRPV3, three heat-gated members of the transient receptor potential vanilloid (TRPV) ion channel subfamily. Here we demonstrated that two structurally related compounds, diphenylboronic anhydride (DPBA) and diphenyltetrahydrofuran (DPTHF), can also modulate the activity of these channels. DPBA acted as a TRPV3 agonist, whereas DPTHF exhibited prominent antagonistic activity. However, all three diphenyl-containing compounds promoted some degree of channel activation or potentiation, followed by channel block. Strong TRPV3 activation by DPBA often leads to the appearance of a secondary, enhanced, current phase. A similar biphasic response was observed during TRPV3 heat stimulation; an initial, gradually sensitizing phase (I(1)) was followed by an abrupt transition to a secondary phase (I(2)). I(2) was characterized by larger current amplitude, loss of outward rectification, and alterations in the following properties: permeability among cations; ruthenium red and DPTHF sensitivity; temperature dependence; and voltage-dependent gating. The I(1) to I(2) transition depended strongly on TRPV3 current density. Removal of extracellular divalent cations resulted in heat-evoked currents resembling I(2), whereas mutation of a putative Ca(2+)-binding residue in the pore loop domain, aspartate 641, facilitated detection of the I(1) to I(2) transition, suggesting that the conversion to I(2) resulted from the agonist- and time-dependent loss of divalent cationic inhibition. Primary keratinocytes overexpressing exogenous TRPV3 also exhibited biphasic agonist-evoked currents. Thus, strong activation by either chemical or thermal stimuli led to biphasic TRPV3 signaling behavior that may be associated with changes in the channel pore.     

alpha-helical structural elements within the voltage-sensing domains of a K(+) channel

Voltage-gated K(+) channels are tetramers with each subunit containing six (S1-S6) putative membrane spanning segments. The fifth through sixth transmembrane segments (S5-S6) from each of four subunits assemble to form a central pore domain. A growing body of evidence suggests that the first four segments (S1-S4) comprise a domain-like voltage-sensing structure. While the topology of this region is reasonably well defined, the secondary and tertiary structures of these transmembrane segments are not. To explore the secondary structure of the voltage-sensing domains, we used alanine-scanning mutagenesis through the region encompassing the first four transmembrane segments in the drk1 voltage-gated K(+) channel. We examined the mutation-induced perturbation in gating free energy for periodicity characteristic of alpha-helices. Our results are consistent with at least portions of S1, S2, S3, and S4 adopting alpha-helical secondary structure. In addition, both the S1-S2 and S3-S4 linkers exhibited substantial helical character. The distribution of gating perturbations for S1 and S2 suggest that these two helices interact primarily with two environments. In contrast, the distribution of perturbations for S3 and S4 were more complex, suggesting that the latter two helices make more extensive protein contacts, possibly interfacing directly with the shell of the pore domain.     

Exploration of the pore structure of a peptide-gated Na+ channel

The FMRF-amide-activated sodium channel (FaNaC), a member of the ENaC/Degenerin family, is a homotetramer, each subunit containing two transmembrane segments. We changed independently every residue of the first transmembrane segment (TM1) into a cysteine and tested each position's accessibility to the cysteine covalent reagents MTSET and MTSES. Eleven mutants were accessible to the cationic MTSET, showing that TM1 faces the ion translocation pathway. This was confirmed by the accessibility of cysteines present in the acid-sensing ion channels and other mutations introduced in FaNaC TM1. Modification of accessibilities for positions 69, 71 and 72 in the open state shows that the gating mechanism consists of the opening of a constriction close to the intracellular side. The anionic MTSES did not penetrate into the channel, indicating the presence of a charge selectivity filter in the outer vestibule. Furthermore, amiloride inhibition resulted in the channel occlusion in the middle of the pore. Summarizing, the ionic pore of FaNaC includes a large aqueous cavity, with a charge selectivity filter in the outer vestibule and the gate close to the interior.     

Evidence for intersubunit interactions between S4 and S5 transmembrane segments of the Shaker potassium channel

Voltage-gated potassium channels are transmembrane proteins made up of four subunits, each comprising six transmembrane (S1-S6) segments. S1-S4 form the voltage-sensing domain and S5-S6 the pore domain with its central pore. The sensor domain detects membrane depolarization and transmits the signal to the activation gates situated in the pore domain, thereby leading to channel opening. An understanding of the mechanism by which the sensor communicates the signal to the pore requires knowledge of the structure of the interface between the voltage-sensing and pore domains. Toward this end, we have introduced single cysteine mutations into the extracellular end of S4 (positions 356 and 357) in conjunction with a cysteine in S5 (position 418) of the Shaker channel and expressed the mutants in Xenopus oocytes. We then examined the propensity of each pair of engineered cysteines to form a metal bridge or a disulfide bridge, respectively, by examining the effect of Cd2+ ions and copper phenanthroline on the K+ conductance of a whole oocyte. Both reagents reduced currents through the S357C,E418C double mutant channel, presumably by restricting the movements necessary for coupling the voltage-sensing function to pore opening. This inhibitory effect was seen in the closed state of the channel and with heteromers composed of S357C and E418C single mutant subunits; no effect was seen with homomers of any of the single mutant channels. These data indicate that the extracellular end of S4 lies in close proximity to the extracellular end of the S5 of the neighboring subunit in closed channels.     

Alignment of transmembrane regions in the cystic fibrosis transmembrane conductance regulator chloride channel pore

Different transmembrane (TM) α helices are known to line the pore of the cystic fibrosis TM conductance regulator (CFTR) Cl(-) channel. However, the relative alignment of these TMs in the three-dimensional structure of the pore is not known. We have used patch-clamp recording to investigate the accessibility of cytoplasmically applied cysteine-reactive reagents to cysteines introduced along the length of the pore-lining first TM (TM1) of a cysteine-less variant of CFTR. We find that methanethiosulfonate (MTS) reagents irreversibly modify cysteines substituted for TM1 residues K95, Q98, P99, and L102 when applied to the cytoplasmic side of open channels. Residues closer to the intracellular end of TM1 (Y84-T94) were not apparently modified by MTS reagents, suggesting that this part of TM1 does not line the pore. None of the internal MTS reagent-reactive cysteines was modified by extracellular [2-(trimethylammonium)ethyl] MTS. Only K95C, closest to the putative intracellular end of TM1, was apparently modified by intracellular [2-sulfonatoethyl] MTS before channel activation. Comparison of these results with recent work on CFTR-TM6 suggests a relative alignment of these two important TMs along the axis of the pore. This alignment was tested experimentally by formation of disulfide bridges between pairs of cysteines introduced into these two TMs. Currents carried by the double mutants K95C/I344C and Q98C/I344C, but not by the corresponding single-site mutants, were inhibited by the oxidizing agent copper(II)-o-phenanthroline. This inhibition was irreversible on washing but could be reversed by the reducing agent dithiothreitol, suggesting disulfide bond formation between the introduced cysteine side chains. These results allow us to develop a model of the relative positions, functional contributions, and alignment of two important TMs lining the CFTR pore. Such functional information is necessary to understand and interpret the three-dimensional structure of the pore.