Metabolic Engineering of Glycerol Production in Saccharomyces cerevisiae

Inactivation of TPI1, the Saccharomyces cerevisiae structural gene encoding triose phosphate isomerase, completely eliminates growth on glucose as the sole carbon source. In tpi1-null mutants, intracellular accumulation of dihydroxyacetone phosphate might be prevented if the cytosolic NADH generated in glycolysis by glyceraldehyde-3-phosphate dehydrogenase were quantitatively used to reduce dihydroxyacetone phosphate to glycerol. We hypothesize that the growth defect of tpi1-null mutants is caused by mitochondrial reoxidation of cytosolic NADH, thus rendering it unavailable for dihydroxyacetone-phosphate reduction. To test this hypothesis, a tpi1Δ nde1Δ nde2Δ gut2Δ quadruple mutant was constructed. NDE1 and NDE2 encode isoenzymes of mitochondrial external NADH dehydrogenase; GUT2 encodes a key enzyme of the glycerol-3-phosphate shuttle. It has recently been demonstrated that these two systems are primarily responsible for mitochondrial oxidation of cytosolic NADH in S. cerevisiae. Consistent with the hypothesis, the quadruple mutant grew on glucose as the sole carbon source. The growth on glucose, which was accompanied by glycerol production, was inhibited at high-glucose concentrations. This inhibition was attributed to glucose repression of respiratory enzymes as, in the quadruple mutant, respiratory pyruvate dissimilation is essential for ATP synthesis and growth. Serial transfer of the quadruple mutant on high-glucose media yielded a spontaneous mutant with much higher specific growth rates in high-glucose media (up to 0.10 h⁻¹ at 100 g of glucose·liter⁻¹). In aerated batch cultures grown on 400 g of glucose·liter⁻¹, this engineered S. cerevisiae strain produced over 200 g of glycerol·liter⁻¹, corresponding to a molar yield of glycerol on glucose close to unity.     

啤酒酵母代谢工程研究进展

啤酒工业上应用的啤酒酵母菌株在生产中都会存在着某些方面的缺陷。通过分析啤酒酵母某些代谢产物的代谢途径,寻找改变其代谢流量的方法,然后用分子生物学手段对其代谢流量加以改变,来调节啤酒酵母某些产物的代谢水平已经成为啤酒酵母育种的新方式。对酵母的底物利用、可操作性、控制有害副产物的产量及改善啤酒风味等方面的研究成果进行了综述。     

Metabolic Engineering of Saccharomyces cerevisiae

Comprehensive knowledge regarding Saccharomyces cerevisiae has accumulated over time, and today S. cerevisiae serves as a widley used biotechnological production organism as well as a eukaryotic model system. The high transformation efficiency, in addition to the availability of the complete yeast genome sequence, has facilitated genetic manipulation of this microorganism, and new approaches are constantly being taken to metabolicially engineer this organism in order to suit specific needs. In this paper, strategies and concepts for metabolic engineering are discussed and several examples based upon selected studies involving S. cerevisiae are reviewed. The many different studies of metabolic engineering using this organism illustrate all the categories of this multidisciplinary field: extension of substrate range, improvements of producitivity and yield, elimination of byproduct formation, improvement of process performance, improvements of cellular properties, and extension of product range including heterologous protein production.     

Improvement of Xylose Uptake and Ethanol Production in Recombinant Saccharomyces cerevisiae through an Inverse Metabolic Engineering Approach

We used an inverse metabolic engineering approach to identify gene targets for improved xylose assimilation in recombinant Saccharomyces cerevisiae. Specifically, we created a genomic fragment library from Pichia stipitis and introduced it into recombinant S. cerevisiae expressing XYL1 and XYL2. Through serial subculturing enrichment of the transformant library, 16 transformants were identified and confirmed to have a higher growth rate on xylose. Sequencing of the 16 plasmids isolated from these transformants revealed that the majority of the inserts (10 of 16) contained the XYL3 gene, thus confirming the previous finding that XYL3 is the consensus target for increasing xylose assimilation. Following a sequential search for gene targets, we repeated the complementation enrichment process in a XYL1 XYL2 XYL3 background and identified 15 fast-growing transformants, all of which harbored the same plasmid. This plasmid contained an open reading frame (ORF) designated PsTAL1 based on a high level of homology with S. cerevisiae TAL1. To further investigate whether the newly identified PsTAL1 ORF is responsible for the enhanced-growth phenotype, we constructed an expression cassette containing the PsTAL1 ORF under the control of a constitutive promoter and transformed it into an S. cerevisiae recombinant expressing XYL1, XYL2, and XYL3. The resulting recombinant strain exhibited a 100% increase in the growth rate and a 70% increase in ethanol production (0.033 versus 0.019 g ethanol/g cells · h) on xylose compared to the parental strain. Interestingly, overexpression of PsTAL1 did not cause growth inhibition when cells were grown on glucose, unlike overexpression of the ScTAL1 gene. These results suggest that PsTAL1 is a better gene target for engineering of the pentose phosphate pathway in recombinant S. cerevisiae.     

Metabolic Engineering of Saccharomyces cerevisiae for Caffeine and Theobromine Production

Caffeine (1, 3, 7-trimethylxanthine) and theobromine (3, 7-dimethylxanthine) are the major purine alkaloids in plants, e.g. tea (Camellia sinensis) and coffee (Coffea arabica). Caffeine is a major component of coffee and is used widely in food and beverage industries. Most of the enzymes involved in the caffeine biosynthetic pathway have been reported previously. Here, we demonstrated the biosynthesis of caffeine (0.38 mg/L) by co-expression of Coffea arabica xanthosine methyltransferase (CaXMT) and Camellia sinensis caffeine synthase (TCS) in Saccharomyces cerevisiae. Furthermore, we endeavored to develop this production platform for making other purine-based alkaloids. To increase the catalytic activity of TCS in an effort to increase theobromine production, we identified four amino acid residues based on structural analyses of 3D-model of TCS. Two TCS1 mutants (Val317Met and Phe217Trp) slightly increased in theobromine accumulation and simultaneously decreased in caffeine production. The application and further optimization of this biosynthetic platform are discussed.     

代谢工程改造酿酒酵母生产L-乳酸的研究进展

L-乳酸是一种重要的有机化合物,具有广泛的应用价值。微生物发酵法生产是当前L-乳酸的主要来源,但受限于精确的发酵条件、菌体产物耐受能力低及底物要求高等因素,导致L-乳酸供给不足且价格偏高。鉴于酿酒酵母利用廉价底物生产有价值物质方面的诸多优势,并随着分子生物学技术的发展,利用代谢工程改造酿酒酵母本身固有的代谢网络,使其高产L-乳酸已成为当前研究的热点。从L-乳酸的异源生产、关键途径改造及菌体生长能力恢复三个方面归纳了关于代谢工程改造酿酒酵母生产L-乳酸的研究进展。最后,指出了酿酒酵母异源生产L-乳酸存在的不足和今后研究的方向。     

Genetic Engineering of Inhibitor-Tolerant Saccharomyces cerevisiae for Improved Xylose Utilization in Ethanol Production

For economical lignocellulose-to-ethanol production, a desirable biocatalyst should tolerate inhibitors derived from preteatment of lignocellulose and be able to utilize heterogeneous biomass sugars of hexoses and pentoses. Previously, we developed an inhibitor-tolerant Saccharomyces cerevisiae strain NRRL Y-50049 that is able to in situ detoxify common aldehyde inhibitors such as 2-furaldehyde (furfural) and 5-(hydroxymethyl)-2-furaldehyde (HMF). In this study, we genetically engineered Y-50049 to enable and enhance its xylose utilization capability. A codon-optimized xylose isomerase gene for yeast (YXI) was synthesized and introduced into a defined chromosomal locus of Y-50049. Two newly identified xylose transport related genes XUT4 and XUT6, and previously reported xylulokinase gene (XKS1), and xylitol dehydrogenase gene (XYL2) from Scheffersomyces stipitis were also engineered into the yeast resulting in strain NRRL Y-50463. The engineered strain was able to grow on xylose as sole carbon source and a minimum ethanol production of 38.6?g?l^?1 was obtained in an anaerobic fermentation on mixed sugars of glucose and xylose in the presence of furfural and HMF.     

Fumaric Acid Production in Saccharomyces cerevisiae by In Silico Aided Metabolic Engineering

Fumaric acid (FA) is a promising biomass-derived building-block chemical. Bio-based FA production from renewable feedstock is a promising and sustainable alternative to petroleum-based chemical synthesis. Here we report on FA production by direct fermentation using metabolically engineered Saccharomyces cerevisiae with the aid of in silico analysis of a genome-scale metabolic model. First, FUM1 was selected as the target gene on the basis of extensive literature mining. Flux balance analysis (FBA) revealed that FUM1 deletion can lead to FA production and slightly lower growth of S. cerevisiae. The engineered S. cerevisiae strain obtained by deleting FUM1 can produce FA up to a concentration of 610±31 mg L^–1 without any apparent change in growth in fed-batch culture. FT-IR and ¹H and ¹³C NMR spectra confirmed that FA was synthesized by the engineered S. cerevisiae strain. FBA identified pyruvate carboxylase as one of the factors limiting higher FA production. When the RoPYC gene was introduced, S. cerevisiae produced 1134±48 mg L^–1 FA. Furthermore, the final engineered S. cerevisiae strain was able to produce 1675±52 mg L^–1 FA in batch culture when the SFC1 gene encoding a succinate–fumarate transporter was introduced. These results demonstrate that the model shows great predictive capability for metabolic engineering. Moreover, FA production in S. cerevisiae can be efficiently developed with the aid of in silico metabolic engineering.     

Evolutionary Engineering Improves Tolerance for Replacement Jet Fuels in Saccharomyces cerevisiae

Monoterpenes are liquid hydrocarbons with applications ranging from flavor and fragrance to replacement jet fuel. Their toxicity, however, presents a major challenge for microbial synthesis. Here we evolved limonene-tolerant Saccharomyces cerevisiae strains and sequenced six strains across the 200-generation evolutionary time course. Mutations were found in the tricalbin proteins Tcb2p and Tcb3p. Genomic reconstruction in the parent strain showed that truncation of a single protein (tTcb3p^1-989), but not its complete deletion, was sufficient to recover the evolved phenotype improving limonene fitness 9-fold. tTcb3p^1-989 increased tolerance toward two other monoterpenes (β-pinene and myrcene) 11- and 8-fold, respectively, and tolerance toward the biojet fuel blend AMJ-700t (10% cymene, 50% limonene, 40% farnesene) 4-fold. tTcb3p^1-989 is the first example of successful engineering of phase tolerance and creates opportunities for production of the highly toxic C₁₀ alkenes in yeast.     

Ethanol Production by Saccharomyces cerevisiae Immobilized in Hollow-Fiber Membrane Bioreactors

Saccharomyces cerevisiae ATCC 4126 was grown within the macroporous matrix of asymmetric-walled polysulfone hollow-fiber membranes and on the exterior surfaces of isotropic-walled polypropylene hollow-fiber membranes. Nutrients were supplied and products were removed by single-pass perfusion of the fiber lumens. Growth of yeast cells within the macrovoids of the asymmetric-walled membranes attained densities of greater than 10¹⁰ cells per ml and in some regions accounted for nearly 100% of the available macrovoid volume, forming a tissue-like mass. A radial distribution of cell packing existed across the fiber wall, indicating an inadequate glucose supply to cells located beyond 100 μm from the lumen surface. By comparison, yeast cell growth on the exterior surfaces of the isotropic-walled membranes resulted in an average density of 3.5 × 10⁹ viable cells per ml. Ethanol production by reactors containing isotropic polypropylene fibers reached a maximum value of 26 g/liter-h based on the total reactor volume. Reactor performance depended on the fiber packing density and on the glucose medium flow rate and was limited by low nutrient and product transport rates. The inhibition of ethanol production and the reduction in fermentation efficiency arose primarily from the accumulation of CO₂ gas within the sealed reactor shell space.     

Production of Ethanol from Starch by Respiration-Deficient Recombinant Saccharomyces cerevisiae

A 100%-respiration-deficient nuclear petite amylolytic Saccharomyces cerevisiae NPB-G strain was generated, and its employment for direct fermentation of starch into ethanol was investigated. In a comparison of ethanol fermentation performances with the parental respiration-sufficient WTPB-G strain, the NPB-G strain showed an increase of ca. 48% in both ethanol yield and ethanol productivity.     

代谢工程与全基因组重组构建酿酒酵母抗逆高产乙醇菌株

将酿酒酵母海藻糖代谢工程与全基因组重组技术相结合,改良工业酿酒酵母菌株的抗逆性和乙醇发酵性能。对来源于二倍体出发菌株Zd4的两株优良单倍体Z1和Z2菌株进行杂交获得基因组重组菌株Z12,并对Z1和Z2先进行(1)过表达海藻糖-6-磷酸合成酶基因 (TPS1) ,(2)敲除海藻糖水解酶基因 (ATH1), (3)同时过表达 TPS1和敲除ATH1, 经此三种基因工程操作后再进行杂交获得代谢工程菌株的全基因组重组菌株Z12ptps1、Z12 Δath1和Z12pTΔA。与亲株Zd4相比,Z12及结合代谢工程获得的菌株在高糖、高乙醇浓度与高温条件下生长与乙醇发酵性能都有不同程度的改进。对比研究结果表明:在高糖发酵条件下,同时过表达 TPS1和敲除ATH1 的双基因操作工程菌株胞内海藻糖积累、乙醇主发酵速率和乙醇产量相对于亲株的提高幅度要大于只过表达 TPS1,或敲除ATH1 的工程菌。结合了全基因组重组后获得的二倍体工程菌株Z12pTΔA,与原始出发菌株Zd4及重组子Z12相比,主发酵速率分别提高11.4%和6.3%,乙醇产量提高7.0%和4.1%,与其胞内海藻糖含量高于其它菌株、在胁迫条件下具有更强耐逆境能力相一致。结果证明,海藻糖代谢工程与杂交介导的全基因组重组相结合,是提高酿酒酵母抗逆生长与乙醇发酵性能的有效策略与技术途径。     

一种基因工程改造的NADH高亲和力木糖还原酶突变基因可促进酿酒酵母发酵木糖生成乙醇

在导入表达毕赤酵母(Pichia stipitis)木糖还原酶(xylose reductase,XR)和木糖醇脱氢酶(xylitol dehydrogenase,XDH)基因的重组酿酒酵母中,木糖还原酶活性主要依赖辅酶NADPH,木糖醇脱氢酶活性依赖辅酶 NAD+,两者的辅助因子不同导致细胞内电子氧化还原的不平衡,是造成木糖醇积累,影响木糖代谢和乙醇产量的主要原因之一.将经过基因工程改造获得的NADH高亲和力的木糖还原酶突变基因m1,与毕赤酵母木糖醇脱氢酶(PsXDH)基因xyl2共转染酿酒酵母AH109,以转染毕赤酵母木糖还原酶(PsXR)基因xyl1和xyl2重组质粒的酵母细胞为对照菌株,在SC/-Leu/-Trp营养缺陷型培养基中进行筛选,获得的阳性转化子分别命名为AH-M-XDH和AH-XR-XDH.重组酵母在限制氧通气条件下对木糖和葡萄糖进行共发酵摇瓶培养,HPLC检测发酵底物的消耗和代谢产物的产出情况.结果显示,与对照菌株AH-XR-XDH相比,AH-M-XDH的木糖利用率明显提高,乙醇得率增加了16%,木糖醇产生下降了41.4%.结果证实,通过基因工程改造的木糖代谢关键酶,可用于酿酒酵母发酵木糖生产乙醇,其能通过改善酿酒酵母细胞内氧化还原失衡的问题,提高木糖利用率和乙醇产率.     

Integration of Metabolic Modeling and Phenotypic Data in Evaluation and Improvement of Ethanol Production Using Respiration-Deficient Mutants of Saccharomyces cerevisiae

Flux balance analysis and phenotypic data were used to provide clues to the relationships between the activities of gene products and the phenotypes resulting from the deletion of genes involved in respiratory function in Saccharomyces cerevisiae. The effect of partial or complete respiratory deficiency on the ethanol production and growth characteristics of hap4Δ/hap4Δ, mig1Δ/mig1Δ, qdr3Δ/qdr3Δ, pdr3Δ/pdr3Δ, qcr7Δ/qcr7Δ, cyt1Δ/cyt1Δ, and rip1Δ/rip1Δ mutants grown in microaerated chemostats was investigated. The study provided additional evidence for the importance of the selection of a physiologically relevant objective function, and it may improve quantitative predictions of exchange fluxes, as well as qualitative estimations of changes in intracellular fluxes. Ethanol production was successfully predicted by flux balance analysis in the case of the qdr3Δ/qdr3Δ mutant, with maximization of ethanol production as the objective function, suggesting an additional role for Qdr3p in respiration. The absence of similar changes in estimated intracellular fluxes in the qcr7Δ/qcr7Δ mutant compared to the rip1Δ/rip1Δ and cyt1Δ/cyt1Δ mutants indicated that the effect of the deletion of this subunit of complex III was somehow compensated for. Analysis of predicted flux distributions indicated self-organization of intracellular fluxes to avoid NAD⁺/NADH imbalance in rip1Δ/rip1Δ and cyt1Δ/cyt1Δ mutants, but not the qcr7Δ/qcr7Δ mutant. The flux through the glycerol efflux channel, Fps1p, was estimated to be zero in all strains under the investigated conditions. This indicates that previous strategies for improving ethanol production, such as the overexpression of the glutamate synthase gene GLT1 in a GDH1 deletion background or deletion of the glycerol efflux channel gene FPS1 and overexpression of GLT1, are unnecessary in a respiration-deficient background.     

Metabolic Engineering of a Phosphoketolase Pathway for Pentose Catabolism in Saccharomyces cerevisiae

Low ethanol yields on xylose hamper economically viable ethanol production from hemicellulose-rich plant material with Saccharomyces cerevisiae. A major obstacle is the limited capacity of yeast for anaerobic reoxidation of NADH. Net reoxidation of NADH could potentially be achieved by channeling carbon fluxes through a recombinant phosphoketolase pathway. By heterologous expression of phosphotransacetylase and acetaldehyde dehydrogenase in combination with the native phosphoketolase, we installed a functional phosphoketolase pathway in the xylose-fermenting Saccharomyces cerevisiae strain TMB3001c. Consequently the ethanol yield was increased by 25% because less of the by-product xylitol was formed. The flux through the recombinant phosphoketolase pathway was about 30% of the optimum flux that would be required to completely eliminate xylitol and glycerol accumulation. Further overexpression of phosphoketolase, however, increased acetate accumulation and reduced the fermentation rate. By combining the phosphoketolase pathway with the ald6 mutation, which reduced acetate formation, a strain with an ethanol yield 20% higher and a xylose fermentation rate 40% higher than those of its parent was engineered.