Xanthan gum production under several operational conditions: molecular structure and rheological properties*

Xanthan gum production under several operational conditions has been studied. Temperature, initial nitrogen concentration and oxygen mass transfer rate have been changed and average molecular weight, pyruvilation and acetylation degree of xanthan produced have been measured in order to know the influence of these variables on the synthesised xanthan molecular structure. Also, xanthan gum solution viscosity has been measured, and rheological properties of the solutions have been related to molecular structure and operational conditions. The Casson model has been employed to describe the rheological behaviour. The parameter values of the Casson model, tau(0) and K(c), have been obtained for each polysaccharide synthesised under different operational conditions. Both pyruvilation and acetylation degrees and average molecular weight of xanthan increase with fermentation time at any operating conditions. Xanthan molecules with the highest average molecular weight have been obtained at 25 degrees C. Nevertheless, at this temperature acetate and pyruvate radical concentration are lowest. Nitrogen concentration in broth does not show any clear influence over xanthan average molecular weight, although with high nitrogen source concentration xanthan with low pyruvilation degree is produced.     

Functional characterization of GumK, a membrane-associated beta-glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

Xanthomonas campestris is a Gram-negative bacterium that produces an exopolysaccharide known as xanthan gum. Xanthan is involved in a variety of biological functions, including pathogenesis, and is widely used in the industry as thickener and viscosifier. Although the genetics and biosynthetic process of xanthan are well documented, the enzymatic components have not been examined and no data on glycosyltransferases have been reported. We describe the functional characterization of the gumK gene product, an essential protein for xanthan synthesis. Immunoblots and complementation studies showed that GumK is a 44-kDa protein associated to the membrane fraction. This value corresponds to the expected molecular mass for GumK encoded by an extended open reading frame than proposed from previous genetic data and in X. campestris published complete genome. The protein was expressed in Escherichia coli cells. The purified protein catalyzed the transfer of a glucuronic acid residue from UDP-glucuronic acid to mannose-alpha-1,3-glucose-beta-1,4-glucose-P-P-polyisoprenyl with formation of a glucuronic acid-beta-mannose linkage. We examined the acceptor substrate specificity. GumK was unable to use the trisaccharide acceptor freed from the pyrophosphate lipid moiety. Replacement of the natural lipid moiety by phytanyl showed that the catalytic function could proceed with glucuronic acid transfer. These results suggest the enzyme does not show specificity for the lipidic portion of the acceptor. GumK showed diminished activity when tested with 6-O-acetyl-mannose-alpha-1,3-glucose-beta-1,4-glucose-P-P-polyisoprenyl, a putative intermediate in the synthesis of xanthan. This could indicate that acetylation of the internal mannose takes place after the formation of the GumK product.     

Detection of Xanthomonas campestris mutants with increased xanthan production

Several mutants of Xanthomonas campestris showing increased viscosity and/or gum production were detected after UV treatment. Xanthan solutions of the different mutants showed different intrinsic viscosity values, and no relationship was found between pyruvate or acetate contents and viscosifying ability of the xanthan. The best performance mutant (M-11) was obtained using halo size around colonies in starch-agar plates as the detection criterion, and proved the usefulness of this indirect screen for improved xanthan producers. A pleiotropic effect of this mutation on growth rate and total cell growth was observed. Received 07 December 1995/ Accepted in revised form 14 November 1996     

A structural factor responsible for substrate recognition by Bacillus sp. GL1 xanthan lyase that acts specifically on pyruvated side chains of xanthan

Xanthan is a bacterial heteropolysaccharide composed of pentasaccharide repeating units, i.e., a cellobiose as a backbone and a trisaccharide consisting of two mannoses and one glucuronic acid as a side chain. Nonreducing terminal mannose residues of xanthan side chains are partially pyruvated. Bacillus sp. GL1 xanthan lyase, a member of polysaccharide lyase family 8, acts specifically on pyruvated side chains of xanthan and yields pyruvated mannose through a beta-elimination reaction by using a single Tyr255 residue as base and acid catalysts. Here we show structural factors for substrate recognition by xanthan lyase through X-ray crystallographic and mutational analyses. The enzyme accommodates mannose and pyruvated mannose at the -1 subsite, although both inhibitor and dissociation constants of the two monosaccharides indicated that the affinity of pyruvated mannose for xanthan lyase is much higher than that of mannose. The high affinity of pyruvated mannose is probably due to the formation of additional hydrogen bonds between the carboxyl group of pyruvated mannose and amino acid residues of Tyr315 and Arg612. Site-directed mutagenesis of the two residues demonstrated that Arg612 is a key residue in recognizing pyruvated mannose. Arg612 is located in the protruding loop covering the substrate, suggesting that the loop functions as a lid that is responsible for the proper accommodation of the substrate at the active site.     

Rheology of concentrated isotropic and anisotropic xanthan solutions: 3. Temperature dependence

The oscillatory rheology of one rodlike and one semiflexible xanthan sample has been investigated as a function of temperature in the range of xanthan concentrations where the polymer forms a lyotropic liquid crystalline phase in aqueous NaCl solutions. Readily observed changes in the rheological observables at temperatures corresponding to phase boundaries permit construction of the biphasic chimney region of the temperature-composition phase diagram. The chimney region leans toward larger values of the polymer concentration with increasing temperature, presumably as a consequence of a reduction in the effective axial ratio of the helical polymer with increasing temperature. The results permit construction of plots of the rheological observables as a function of polymer concentration at temperatures T in the range 20 相似文献   

Xanthan gum biosynthesis and application: a biochemical /genetic perspective

Xanthan gum is a complex exopolysaccharide produced by the plant-pathogenic bacterium Xanthomonas campestris pv. campestris. It consists of D-glucosyl, D-mannosyl, and D-glucuronyl acid residues in a molar ratio of 2:2:1 and variable proportions of O-acetyl and pyruvyl residues. Because of its physical properties, it is widely used as a thickener or viscosifier in both food and non-food industries. Xanthan gum is also used as a stabilizer for a wide variety of suspensions, emulsions, and foams. This article outlines aspects of the biochemical assembly and genetic loci involved in its biosynthesis, including the synthesis of the sugar nucleotide substrates, the building and decoration of the pentasaccharide subunit, and the polymerization and secretion of the polymer. An overview of the applications and industrial production of xanthan is also covered. Received: 18 March 1998 / Received revision: 29 April 1998 / Accepted: 30 April 1998     

Detection and visualization of an exopolysaccharide produced by Xylella fastidiosa in vitro and in planta

Many phytopathogenic bacteria, such as Ralstonia solanacearum, Pantoea stewartii, and Xanthomonas campestris, produce exopolysaccharides (EPSs) that aid in virulence, colonization, and survival. EPS can also contribute to host xylem vessel blockage. The genome of Xylella fastidiosa, the causal agent of Pierce's disease (PD) of grapevine, contains an operon that is strikingly similar to the X. campestris gum operon, which is responsible for the production of xanthan gum. Based on this information, it has been hypothesized that X. fastidiosa is capable of producing an EPS similar in structure and composition to xanthan gum but lacking the terminal mannose residue. In this study, we raised polyclonal antibodies against a modified xanthan gum polymer similar to the predicted X. fastidiosa EPS polymer. We used enzyme-linked immunosorbent assay to quantify production of EPS from X. fastidiosa cells grown in vitro and immunolocalization microscopy to examine the distribution of X. fastidiosa EPS in biofilms formed in vitro and in planta and assessed the contribution of X. fastidiosa EPS to the vascular occlusions seen in PD-infected grapevines.     

Sources and methods of manufacturing xanthan by fermentation of various carbon sources

Xanthan gum, an anionic polysaccharide with an exceptionally high molecular weight, is produced by the bacterium Xanthomonas sp. It is a versatile compound that has been utilized in various industries for decades. Xanthan gum was the second exopolysaccharide to be commercially produced, following dextran. In 1969, the US Food and Drug Administration (FDA) approved xanthan gum for use in the food and pharmaceutical industries. The food industry values xanthan gum for its exceptional rheological properties, which make it a popular thickening agent in many products. Meanwhile, the cosmetics industry capitalizes on xanthan gum's ability to form stable emulsions. The industrial production process of xanthan gum involves fermenting Xanthomonas in a medium that contains glucose, sucrose, starch, etc. as a substrate and other necessary nutrients to facilitate growth. This is achieved through batch fermentation under optimal conditions. However, the increasing costs of glucose in recent years have made the production of xanthan economically unviable. Therefore, many researchers have investigated alternative, cost-effective substrates for xanthan production, using various modified and unmodified raw materials. The objective of this analysis is to investigate how utilizing different raw materials can improve the cost-efficient production of xanthan gum.     

Biodegradation of xanthan by salt-tolerant aerobic microorganisms

Summary Three salt-tolerant bacteria which degraded xanthan were isolated from various water and soil samples collected from New Jersey, Illinois, and Louisiana. The mixed culture, HD1, contained aBacillus sp. which produced an inducible enzyme(s) having the highest extracellular xanthan-degrading activity found. Xanthan alone induced the observed xanthan-degrading activity. The optimum pH and temperature for cell growth were 5–7 and 30–35°C, respectively. The optimum temperature for activity of the xanthan-degrading enzyme(s) was 35–45°C, slightly higher than the optimum growth temperature. With a cell-free enzyme preparation, the optimum pH for the reduction of solution viscosity and for the release of reducing sugar groups were different (5 and 6, respectively), suggesting the involvement of more than one enzyme for these two reactions. Products of enzymatic xanthan degradation were identified as glucose, glucuronic acid, mannose, pyruvated mannose, acetylated mannose and unidentified oligo- and polysaccharides. The weight average molecular weight of xanthan samples shifted from 6.5·10⁶ down to 6.0·10⁴ during 18 h of incubation with the cell-free crude enzymes. The activity of the xanthan-degrading enzyme(s) was not influenced by the presence or absence of air or by the presence of Na₂S₂O₄ and low levels of biocides such as formaldehyde (25 ppm) and 2,2-dibromo-3-nitrilopropionamide (10 ppm). Formaldehyde at 50 ppm effectively inhibited growth of the xanthan degraders.     

黄原胶(Xanthan Gum)的特性、生产及应用

黄原胶是野油菜黄单孢菌分泌于胞外的中性水溶性多糖。由于其独特的流变性质而有着极其广泛的工业应用。介绍了黄原胶的生产、特性、降解以及应用,并对其应用潜力作了预测。     

Xanthan Lyase of Bacillus sp. Strain GL1 Liberates Pyruvylated Mannose from Xanthan Side Chains

When the bacterium Bacillus sp. strain GL1 was grown in a medium containing xanthan as the carbon source, the viscosity of the medium decreased in association with growth, showing that the bacterium had xanthan-depolymerizing enzymes. One of the xanthan-depolymerizing enzymes (xanthan lyase) was present in the medium and was found to be induced by xanthan. The xanthan lyase purified from the culture fluid was a monomer with a molecular mass of 75 kDa, and was most active at pH 5.5 and 50°C. The enzyme was highly specific for xanthan and produced pyruvylated mannose. The result indicates that the enzyme cleaved the linkage between the terminal pyruvylated mannosyl and glucuronyl residues in the side chain of xanthan.     

Detection and Visualization of an Exopolysaccharide Produced by Xylella fastidiosa In Vitro and In Planta

Many phytopathogenic bacteria, such as Ralstonia solanacearum, Pantoea stewartii, and Xanthomonas campestris, produce exopolysaccharides (EPSs) that aid in virulence, colonization, and survival. EPS can also contribute to host xylem vessel blockage. The genome of Xylella fastidiosa, the causal agent of Pierce's disease (PD) of grapevine, contains an operon that is strikingly similar to the X. campestris gum operon, which is responsible for the production of xanthan gum. Based on this information, it has been hypothesized that X. fastidiosa is capable of producing an EPS similar in structure and composition to xanthan gum but lacking the terminal mannose residue. In this study, we raised polyclonal antibodies against a modified xanthan gum polymer similar to the predicted X. fastidiosa EPS polymer. We used enzyme-linked immunosorbent assay to quantify production of EPS from X. fastidiosa cells grown in vitro and immunolocalization microscopy to examine the distribution of X. fastidiosa EPS in biofilms formed in vitro and in planta and assessed the contribution of X. fastidiosa EPS to the vascular occlusions seen in PD-infected grapevines.     

Influence of acetyl and pyruvate substituents on the solution properties of xanthan polysaccharide

Xanthan, an exocellular polysaccharide produced by the plant pathogenic bacterium Xanthomonas campestris has been the subject of considerable interest in recent years because of its unusual rheological properties in solution ('weak gel') and consequent range of applications. The polymer consists of a cellulosic backbone with trisaccharide side chains linked to alternate backbone residues; acetyl and pyruvate substituents are carried in variable amounts on these side chains. In this study a series of xanthans differing in the percentage of substituent groups and in molecular weight range have been prepared by culturing a variety of different strains of X. campestris. All of the xanthans have been characterized by a range of physicochemical techniques. In particular, the intrinsic viscosities at low shear rates, and at a range of ionic strengths, have been determined and the geometric persistence lengths evaluated by the Smidsr?d-Haug method. Intensity light scattering measurements have been made using the procedure of Coviello and co-workers to promote molecular dispersion. Despite significant differences in the acetyl and pyruvate contents, the molecular weight vs mean square radius behaviour of our samples did not differ substantially from each other or from those reported for other xanthan samples in the literature. The persistence length, determined by the method of Schmidt et al. (120 +/- 8 nm) was also, within experimental error, the same for all the samples measured. These values differed considerably from those calculated from the ionic strength dependence of intrinsic viscosity (the Smidsr?d-Haug method) was reported by Tinland and Rinaudo and calculated for our samples.(ABSTRACT TRUNCATED AT 250 WORDS)     

Xanthan gum: production, recovery, and properties

Xanthan gum is a microbial polysaccharide of great commercial significance. This review focuses on various aspects of xanthan production, including the producing organism Xanthomonas campestris, the kinetics of growth and production, the downstream recovery of the polysaccharide, and the solution properties of xanthan.     

改性黄原胶酯化条件的优化及结构的表征

为了提高黄原胶的速溶性和粘度,将黄原胶进行改性处理。将黄原胶与马来酸酐进行酯化反应,探讨了黄原胶与马来酸酐摩尔比、反应时间和反应温度等因素的影响,以取代度为指标,利用响应面方法确定,该酯化反应的最优条件为:黄原胶与马来酸酐摩尔比1∶11.5、反应时间24.4 h、反应温度66℃。对改性黄原胶进行红外光谱、光散射和X-射线衍射等结构表征,表明酯化改性成功,且进一步解释了速溶性和粘度提高的原因。改性黄原胶细胞毒性实验,显示无毒性。结果表明,改性黄原胶的速溶性和粘度有很大提高,0.2%改性黄原胶的速溶性和粘度较对照提高了近3倍,在食品、药品等领域具有潜在的应用价值。     

Long-term storage of xanthan in seawater at elevated temperature: physical dimensions and chemical composition of degradation products

Commercial xanthan and xanthan from Xanthomonas strain 646 produced in the laboratory have been subjected to heat treatment for various periods of time in oxygen depleted, high salinity, aqueous solutions. Both the viscosity and the carbohydrate content decreased with increasing incubation time at a specified temperature. The losses increased with increasing temperature. Data from electron micrographs and dialysable sugar content indicate that random cleavage of the double-stranded xanthan chain is the main mechanism responsible for the decreasing viscosity. Removal of pyruvate and acetate substituents on the side chains was apparently not related to the change in physical dimensions. The mannose/glucose ratio in the non-diffusible fraction decreased with incubation time, apparently not related to change in physical dimensions. Electron micrographs showed that one of the samples appeared as highly aggregated in the native condition. After 1 month at 80 degrees C, we observed that the aggregates had dissolved and that the viscosity had increased fivefold. This suggests that heat treatment can be used to avoid microgels and to obtain higher viscosifying power of the native xanthan.     

Modified xanthan—its preparation and viscosity

Xanthan with various pyruvic acid and acetate contents has been prepared from a single commercial polysaccharide sample using optimised chemical conditions (acid and alkali hydrolysis, respectively) for removal of acetal and acyl groups. The only significant change found on analysis of the modified xanthans was loss of pyruvic acid and/or acetate; no low moleculur weight carbohydrate-containing material was released. Contrary to some previous reports, evidence is presented to show that the pyruvic acid acetal and o-acetyl contents of xanthan do not affect solution viscosity. The viscosities of native, pyruvate-free and pyruvate/acetate-free xanthan solutions (0·3% w/v) were similar at shear rates 8·8–88·3 s^?1 in both distilled water and 1% KCl. Over the concentration range 0·2-1·5%, the viscosities of native and pyruvate-free xanthan at 10 s^?1 were similar. The viscosity increase on addition of 1% KCl to salt-free xanthan solutions was independent of pyruvic acid acetal substitution. Our results suggest that xanthan samples with various pyruvic acid acetal and o-acetal contents, prepared under different fermentation conditions of Xanthomonas campestri should not normally be used for assessing the contribution of these groups to solution viscosity.     

Synthesis and properties of a mutant type of xanthan

A mutant of Xanthomas campestris produces good yields of an exopolysaccharide. This material differs from the wild-type xanthan from the parent bacteria, in its very low content of acetate and pyruvate and in its molar ratio of D-glucose:D-mannose of 2:1. Analysis of the products from xanthan lyase indicates that most of the side-chains are disaccharides rather than the normal trisaccharides. The polymer has lower viscosity than normal xanthan. The consistency index was 20 mPa.s compared with 78 mPa.s for the product of the parent strain under standard conditions. The polysaccharide could be further modified by prolonged treatment with β-glucuronidase, which removed some of the terminal β-D-glucuronosyl residues. This enzyme-modified product had much higher viscosity than that from the mutant.     

Novel bacterial exopolysaccharides from deep-sea hydrothermal vents

Five bacterial strains recovered from deep-sea hydrothermal vents were studied for their ability to secrete extracellular polymers. A preliminary characterization displayed four different polysaccharides in terms of both chemical composition and rheological properties. One of them was secreted by Alteromonas macleodii subsp. fijiensis and exhibited similarities with xanthan, a commercial polysaccharide. Two of the three Pseudoalteromonas species were shown to produce the same polymer. The last polymer was secreted by a bacterium belonging to the Vibrio genus. They all contained glucose, galactose, mannose, glucuronic and galacturonic acids as the main sugars with the exception of the last one which was only constituted by uronic acids and hexosamines, in that similar to the structure of heparin, a glycosaminoglycan useful in pharmaceutical area. Applications for these polysaccharides could be expected in various biotechnological fields including the food industry, the wastewater treatment and pharmaceutical areas.