Isolation of Lambda Transducing Phage with the bio Genes Inserted between Lambda Genes P and Q

Plaque-forming, biotin-transducing phages were constructed with the bio genes inserted between lambda genes P and Q. These phages were isolated for the eventual aim of fusing the lambda Q gene to the bio operon. The following steps were used to construct these phages: A defective temperature-sensitive lysogen was constructed with the bio genes adjacent to and to the left of lambda genes beta NcI857OPQSRA. Heat-resistant survivors were screened for deletions with endpoints in the bio operon and to the right of lambda P and to the left of lambda A. Five of approximately 1,600 heat-resistant survivors had these properties. Two had the gene order bioAB .... lambda QSRA. When these two strains were lysogenized with lambda cI857b221 and heat induced, the desired transducing phages were obtained. We characterized these phages and studied one in detail. Two-thirds of the plaque-forming transducing phages isolated carried the entire bioB gene and only part of the bioA gene, and one-third carried the entire bioA and bioB genes. The phages isolated lost the bio genes upon propagation, indicating that they contain a partial duplication of phage genes. The duplication was shown not to involve the entire lambda Q gene in one of these phages, lambda bioq1b221. A recombinant of this phage, lambda Nam7am53c17b221, failed to form plaques under biotin-derepression conditions. We conclude that if the lambda Q gene was fused to the bio operon in this phage, not enough lambda Q gene product was made to allow phage propagation.     

Selective retention of recombinant plasmids coding for human insulin

Plasmids may be lost from Escherichia coli K-12 hosts that are cultured without selection for plasmid retention. This is particularly true for chimeric plasmids that incorporate genes for human insulin into vectors derived from pBR322. The cIts857 gene of bacteriophage lambda was inserted into the bla gene of the human-insulin-coding plasmids, pIA7 delta 4 delta 1, pIB7 delta 4 delta 1 and pHI7 delta 4 delta 1, generating the new plasmids pPR17, pPR18 and pPR19, respectively, which produced the thermosensitive lambda repressor. The cI gene was downstream from the pM and pbla promoters, so that it may have been expressed from either or both promoters. Separate E. coli K-12 RV308 host strains containing the new recombinants were lysogenized with the repressor-defective bacteriophage lambda cI90. Loss of the plasmid from the lysogens causes concomitant loss of the lambda repressor and cell death, because the prophage is induced to enter the lytic growth cycle. The system effectively forces retention of the plasmid in all viable cells in the culture.     

Mutants in the y region of bacteriophage lambda constitutive for repressor synthesis: their isolation and the characterization of the Hyp phenotype

Bacteriophage lambdahyp mutants have been isolated as survivors of Escherichia coli K-12 bacteria lysogenic for lambda Nam7am53cI857. The hyp mutants are characterized by (i) their localization in the y region very close to the imm lambda/imm434 boundary, (ii) polarity on O gene expression, (iii) immediate recovery of lambda immunity at 30 degrees C after prolonged growth of lambda Nam7am53cI857 hyp lysogens at 42 degrees C even in the presence of an active cro gene product, (iv) ability of phage lambda v2v3vs326 but not lambda v1v2v3 to propagate on lambda cI+hyp lysogens, (v) inability to express lambda exonuclease activity after prophage induction, and (vi) inviability at any temperature of phage carrying the hyp mutation. All these properties are referred to collectively as the Hyp phenotype. We show that the Hyp phenotype is due to cII-independent constitutive cI-gene-product synthesis originating in the y region, which results in the synthesis of anti-cro RNA species, and constitutive levels of cro gene product present even in lambda cI+hyp lysogens. A model is presented which is consistent with all the experimental observations.     

Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli

Cell lysis of Gram-negative bacteria can be efficiently achieved by expression of the cloned lysis gene E of bacteriophage PhiX174. Gene E expression is tightly controlled by the rightward lambda pR promoter and the temperature-sensitive repressor cI857 on lysis plasmid pAW12. The resulting empty bacterial cell envelopes, called bacterial ghosts, are currently under investigation as candidate vaccines. Expression of gene E is stringently repressed at temperatures up to 30 degrees C, whereas gene E expression, and thus cell lysis, is induced at temperatures higher than 30 degrees C due to thermal inactivation of the cI857 repressor. As a consequence, the production of ghosts requires that bacteria have to be grown at 28 degrees C before the lysis process is induced. In order to reflect the growth temperature of pathogenic bacteria in vivo, it seemed favorable to extend the heat stability of the lambda pR promoter/cI857 repressor system, allowing pathogens to grow at 37 degrees C before induction of lysis. In this study we describe a mutation in the lambda pR promoter, which allows stringent repression of gene E expression at temperatures up to 36 degrees C, but still permits induction of cell lysis at 42 degrees C.     

DNA cleavage of lambda and phi 80 transducing phages carrying the argA, argECBH, argF and argI operons of Escherichia coli K-12 with the restriction endonucleases EcoRI, SmaI and HindIII.

DNA isolated from each of the seven arginine transducing phages lambdaargA2cI857susS7, phi80ppc argECBH, phi80argF, phi80argF ilambdacI857, lambdaargF2, lambdaargF23 and lambdaargI valScI857susS7 has been specifically cleaved by the restriction endonucleases EcoRI, SmaI and HindIII. The DNA fragments resulting from single, and in some cases, double endonuclease digests were separated by electrophoresis in agarose and also in polyacrylamide gel. The electrophoretic patterns thus obtained were compared with those produced by digestion of DNA isolated from the corresponding lambda and phi80 parental phages. The majority of cleavage sites produced by the action of these restriction enzymes on arginine transducing DNA have been physically mapped.     

W-mutagenesis in the bisulfite-treated lambda phage

Survival of phage lambda cI857 inactivated by bisulfite (pH 5.6, 37 degrees C) is higher (the dose modification factor approx. 1.2) and frequency of bisulfite-induced c-mutations 2-4-fold lower on the lawn of the wild-type strain ung+, as compared to ung-1 mutant deficient in uracil-DNA glycosylase. Irradiation of host cells by a moderate UV dose inducing SOS repair system enhances the frequency of bisulfite-induced c-mutations 2-3-fold in the wild-type (ung+) host, but not in the ung-1 mutant. It is suggested that W-mutagenesis in bisulfite-treated lambda phage in the ung+ cells is due to SOS repair of apyrimidinic sites which are produced during excision of uracil residues, the products of cytosine deamination.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

Endpoint distribution for deletions into imm lambda region forming p lambda CM replicons: phage lambda gene rex affects plasmid establishment

For the p lambda CM family of lambda-derived self-encapsidating plasmids, the rexB gene product facilitates plasmid establishment following injection into a new host cell. Temperature-stable chloramphenicol resistance (CmR at 40 degrees C) conferred by low-multiplicity infection with lambda::Tn9 cI857 lysates (Tn9 sites tested: 22.60 or 24.08 kb, in the b region, or 28.41 kb, in int) is usually due to a lambda::Tn9 plasmid (p lambda CM) formed by a deletion penetrating the lambda immunity region. These grow either as plasmids in the absence of, or lytic phages in the presence of N function supplied by a host such as lambda cI857 delta H1 lysogen MS1449. The 'groplaque' (plaque-shaped growth spot) assay, which selects for CmR growth in an MS1449 lawn at 32 degrees C after an initial plaquing period at 37 degrees C, reveals two distinguishable classes of p lambda CM isolates. All variants whose deletions extend into or beyond rexB give rise to visible CmR growth only after the temperature shift to 32 degrees C, and thus produce a hollow-centered 'donut' type of groplaque. In contrast, 16 out of 17 variants whose deletions fall short of rexB produce 'solid' groplaques which appear before the temperature shift. Tests of T4rII phage exclusion show the exceptional 17th variant to be Rex-, confirming the identification of rex as the lambda component whose loss results in the 'donut' groplaque morphology. More specific physiological tests showed that in the absence of Rex the establishment of a newly injected p lambda CM plasmid becomes temperature-sensitive (ts), while plasmid maintenance remains unaffected. This indicates that the role of Rex in plasmid survival is confined to the early stages of transduction, where it might either assist plasmid replication or retard host replication, to help the plasmid replicon achieve a copy number sufficient for stable transmission.     

Construction of φ80 dhis Carrying Salmonella typhimurium Histidine Operon Mutations

Starting with a previously isolated F'his episome and phi80 dhis imm(lambda) cI857 transducing phage, we have constructed recombinant elements bearing previously isolated his mutations from Salmonella typhimurium. These phages were constructed as sources of deoxyribonucleic acid for in vitro biochemical experiments on gene regulation. The manipulation of genes between S. typhimurium and Escherichia coli described here may be useful in studying other S. typhimurium operons.     

New transducing phage with RNA polymerase beta- and beta'-subunit genes derived from a hybrid phage lambda att80: isolation, genetic analysis and physical mapping]

A hybrid lambda att 80 phage with the genetic structure lambda (A-J) phi 80 (att-int-xis) imm lambda..cI857s7 is shown to be a convenient vector for creating transducing phages. On the one hand, the restriction analysis indicates that it has 3 restriction sites for EcoRI in comparison with 5 and 9 sites for parental phages lambda and phi 80 respectively. On the other hand, its buoyant density is less than that of phage lambda and under centrifugation it is easier separated from the phage transducing particles. When lambda att 80 prophage was excluded from the bfe locus of Escherichia coli, transducing phages with genes of two RNA polymerase beta-subunits (rpoB and rpoC) were isolated. To identify the latter, a convenient genetic test was worked out. A physical map of lambda att 80 drifd 35 transducing phage, carrying rpoB and rpoC genes has been constructed using endonucleases EcoRI and HindIII. A comparison of this map and the corresponding maps of transducing phages lambda drifd 18 and lambda drifd 47, studied earlier, led to the discovery of two integration sites of phage lambda within the locus bfe spaced apart by about 1800 nucleotide pairs. At all the sites both phages (lambda and lambda att 80) have integrated in the locus bfe in the counter clockwise order.     

Selective inhibition of Escherichia coli recBC activities by plasmid-encoded GamS function of phage lambda

The gam locus of bacteriophage lambda encompasses two coding sequences with the same reading frame and translational stop, one corresponding to an Mr 11646 polypeptide (gamS gene), the other to an Mr 16349 polypeptide (gamL gene). A DNA segment encoding gamS but not gamL was placed under lambda pR promoter control (regulated by the cIts857-coded repressor) on a multicopy plasmid, and an insertion mutation (gamS201) was constructed. Expression of gamS+, but not gamS201, inhibited Escherichia coli RecBC nuclease in vivo; the criteria were inhibition of chromosomal DNA degradation after UV irradiation and plating of T4 gene 2- phages. The recB+ C+ bacteria expressing gamS+ were completely or partially similar to recC- mutants with respect to certain phenotypes: defective plating of phages P1 and P2, ability to plate (in a recA- background) lambda red- gam- phages, reduced resistance to UV irradiation, defective SOS induction, decreased colony-forming ability.     

Method for selection of transposable DNA and characterization of a new insertion sequence, IS493, from Streptomyces lividans.

A method to select for transposable elements from Streptomyces spp. by using insertional inactivation of a repressor gene that functions in Escherichia coli was developed. Plasmid pCZA126, which can replicate in Streptomyces spp. or E. coli, contains a gene coding for the lambda cI857 repressor and a gene, under repressor control, coding for apramycin resistance. E. coli cells containing the plasmid are apramycin sensitive but become apramycin resistant if the cI857 repressor gene is disrupted. Plasmids propagated in Streptomyces spp. can be screened for transposable elements that have disrupted the cI857 gene by transforming E. coli cells to apramycin resistance. This method was used to isolate a new 1.6-kilobase insertion sequence, IS493, from Streptomyces lividans CT2. IS493 duplicated host DNA at the target site, had inverted repeats at its ends, and contained two tandem open reading frames on each strand. IS493 was present in three copies in the same genomic locations in several S. lividans strains. Two of the copies appeared to be present in regions of similar DNA context that extended at least 11.5 kilobases. Several other Streptomyces spp. did not appear to contain copies of IS493.     

Mutagenic effect of o-methylhydroxylamine on the prophage and extracellular phage lambda

Induction of c-mutations in extracellular bacteriophage and prophage lambda cI857 ind-treated with 1 M O-methylhydroxylamine (OMHA) at 32 degrees and pH 5.6 has been studied. The frequency of c-mutations increases proportionally to the time of treatment of extracellular phage and does not depend on cellular recA+ or polA+ functions and on induction of SOS-repair system caused by UV-irradiation of host cells. Prophage is inactivated and mutagenized approximately 10-fold faster than extracellular phage immediately after treatment of lysogenic cells during prophage induction. Thus, prophage survival does not depend on repair functions of the host cells, and the frequency of c-mutations in recA and, especially, in polA lysogens is significantly lower, than in the wild-type cells.Delayed thermoinduction (90 min) of prophage causes significant enhancement of survival and decreases the frequency of c-mutations in all strains studied. Preliminary treatment of non-lysogens with OMHA does not increase the frequency of c-mutations in undamaged phage or in phage treated with OMHA in vitro.