Local Partition Coefficients Govern Solute Permeability of Cholesterol-Containing Membranes

The permeability of lipid membranes for metabolic molecules or drugs is routinely estimated from the solute’s oil/water partition coefficient. However, the molecular determinants that modulate the permeability in different lipid compositions have remained unclear. Here, we combine scanning electrochemical microscopy and molecular-dynamics simulations to study the effect of cholesterol on membrane permeability, because cholesterol is abundant in all animal membranes. The permeability of membranes from natural lipid mixtures to both hydrophilic and hydrophobic solutes monotonously decreases with cholesterol concentration [Chol]. The same is true for hydrophilic solutes and planar bilayers composed of dioleoyl-phosphatidylcholine or dioleoyl-phosphatidyl-ethanolamine. However, these synthetic lipids give rise to a bell-shaped dependence of membrane permeability on [Chol] for very hydrophobic solutes. The simulations indicate that cholesterol does not affect the diffusion constant inside the membrane. Instead, local partition coefficients at the lipid headgroups and at the lipid tails are modulated oppositely by cholesterol, explaining the experimental findings. Structurally, these modulations are induced by looser packing at the lipid headgroups and tighter packing at the tails upon the addition of cholesterol.     

Rotational decoupling between the hydrophilic and hydrophobic regions in lipid membranes

Cells use homeostatic mechanisms to ensure an optimal composition of distinct types of lipids in cellular membranes. The hydrophilic region of biological lipid membranes is mainly composed of several types of phospholipid headgroups that interact with incoming molecules, nanoparticles, and viruses, whereas the hydrophobic region consists of a distribution of acyl chains and sterols affecting membrane fluidity/rigidity related properties and forming an environment for membrane-bound molecules such as transmembrane proteins. A fundamental open question is to what extent the motions of these regions are coupled and, consequently, how strongly the interactions of phospholipid headgroups with other molecules depend on the properties and composition of the membrane hydrophobic core. We combine advanced solid-state nuclear magnetic resonance spectroscopy with high-fidelity molecular dynamics simulations to demonstrate how the rotational dynamics of choline headgroups remain nearly unchanged (slightly faster) with incorporation of cholesterol into a phospholipid membrane, contrasting the well-known extreme slowdown of the other phospholipid segments. Notably, our results suggest a new paradigm in which phospholipid dipole headgroups interact as quasi-freely rotating flexible dipoles at the interface, independent of the properties in the hydrophobic region.     

Effects of solute hydrophobicity and phospholipid composition on permeability of composite membranes containing phospholipids

Permeabilities of several solutes through the composite membranes containing phospholipids have been measured. They were inversely proportional to the content of the phospholipids in the membrane. Both the permeability of solutes and the degree of permeability change around the phase transition temperature of the phospholipids for the hydrophobic solutes such as n-butanol and salicylamide were larger than those for the hydrophilic solutes such as amino acids and pyridoxine. These results suggest thatthe permeation path of hydrophobic solutes is different from that of hydrophilic ones. The addition of phosphatidyl ethanolamine, phosphatidyl serine, or phosphatidic acid to the composite membrane influenced the solute permeability due to the introduced negative charge and/or the change in the molecular packing of phospholipid.     

Molecular dynamics simulations of mixed micelles modeling human bile

Extensive molecular dynamics (MD) simulations of binary systems of phospholipids and bile salts, a model for human bile, have been performed. Recent progress in hardware and software development allows simulation of the spontaneous aggregation of the constituents into small mixed micelles, in agreement with experimental observations. The MD simulations reveal the structure of these micelles at atomic detail. The phospholipids are packed radially with their headgroups at the surface and the hydrophobic tails pointing toward the micellar center. The bile salts act as wedges between the phospholipid headgroups, with their hydrophilic sides exposed to the aqueous environment. The structure of the micelles strongly resembles the previously proposed radial shell model. Simulations including small fractions of cholesterol reveal how cholesterol is solubilized inside these mixed micelles without changing their overall structure.     

Molecular dynamics simulations of the human ocular lens with age and cataract

The human ocular lens consists primarily of elongated, static fibers characterized by high stability and low turnover, which differ dramatically in their composition and properties from other biological membranes. Cholesterol (Chol) and sphingolipids (SL) are present at high concentrations, including saturated SLs, such as dihyrosphingomyelin (DHSM). Past molecular dynamics simulations demonstrated that the presence of DHSM and high Chol concentration contributes to higher order in lipid membranes. This current study simulated more complex models of human lens membranes. Models were developed representing physiological compositions in cataractous lenses aged 74 ± 6 years and in healthy lenses aged 22 ± 4, 41 ± 6, and 69 ± 3 years. With older age, Chol and ceramide concentrations increase and glycerophospholipid concentration decreases. With cataract, ceramide concentration increases and Chol and glycerophospholipid concentrations decrease. Surface area per lipid, deuterium order parameters (S_CD), sterol tilt angle, electron density profiles, bilayer thickness, chain interdigitation, two-dimensional radial distribution functions (2D-RDF), lipid clustering, and hydrogen bonding were calculated for all simulations. All systems exhibited low surface area per lipid and high bilayer thickness, indicative of strong vertical packing. S_CD parameters suggest similarly, with saturated tails in the hydrophobic core of the membrane having elevated order. Vertical packing and acyl tail order increased with both age and cataract condition. Lateral diffusion decreased with age and cataracts, with the older and cataractous models demonstrating increased long-range structure by the 2D-RDF analysis. In future work examining the membrane proteins of the lens, these models can serve as a physiologically accurate representation of the lens lipidome.     

Differential dynamic and structural behavior of lipid-cholesterol domains in model membranes

Changes in the cholesterol (Chol) content of biological membranes are known to alter the physicochemical properties of the lipid lamella and consequently the function of membrane-associated enzymes. To characterize these changes, we used steady-state and time resolved fluorescence spectroscopy and two photon-excitation microscopy techniques. The membrane systems were chosen according to the techniques that were used: large unilamellar vesicles (LUVs) for cuvette and giant unilamellar vesicles (GUVs) for microscopy measurements; they were prepared from dipalmitoyl phosphatidylcholine (DPPC) and dioctadecyl phosphatidylcholine (DOPC) in mixtures that are well known to form lipid domains. Two fluorescent probes, which insert into different regions of the bilayer, were selected: 1,6-diphenyl-1,3,5-hexatriene (DPH) was located at the deep hydrophobic core of the acyl chain regions and 2-dimethylamino-6-lauroylnaphthalene (Laurdan) at the hydrophilic-hydrophobic membrane interface. Our spectroscopy results show that (i) the changes induced by cholesterol in the deep hydrophobic phospholipid acyl chain domain are different from the ones observed in the superficial region of the hydrophilic-hydrophobic interface, and these changes depend on the state of the lamella and (ii) the incorporation of cholesterol into the lamella induces an increase in the orientation dynamics in the deep region of the phospholipid acyl chains with a corresponding decrease in the orientation at the region close to the polar lipid headgroups. The microscopy data from DOPC/DPPC/Chol GUVs using Laurdan generalized polarization (Laurdan GP) suggest that a high cholesterol content in the bilayer weakens the stability of the water hydrogen bond network and hence the stability of the liquid-ordered phase (Lo).     

Asymmetric glycerophospholipids impart distinctive biophysical properties to lipid bilayers

Phospholipids are a diverse group of biomolecules consisting of a hydrophilic headgroup and two hydrophobic acyl tails. The nature of the head and length and saturation of the acyl tails are important for defining the biophysical properties of lipid bilayers. It has recently been shown that the membranes of certain yeast species contain high levels of unusual asymmetric phospholipids consisting of one long and one medium-chain acyl moiety, a configuration not common in mammalian cells or other well-studied model yeast species. This raises the possibility that structurally asymmetric glycerophospholipids impart distinctive biophysical properties to the yeast membranes. Previously, it has been shown that lipids with asymmetric length tails form a mixed interdigitated gel phase and exhibit unusual endotherm behavior upon heating and cooling. Here, however, we address physiologically relevant temperature conditions and, using atomistic molecular dynamics simulations and environmentally sensitive fluorescent membrane probes, characterize key biophysical parameters (such as lipid packing, diffusion coefficient, membrane thickness, and area per lipid) in membranes composed of both length-asymmetric glycerophospholipids and ergosterol. Interestingly, we show that saturated but asymmetric glycerophospholipids maintain membrane lipid order across a wide range of temperatures. We also show that these asymmetric lipids can substiture of unsaturated symmetric lipids in the phase behaviour of ternary lipid bilayers. This may allow cells to maintain membrane fluidity, even in environments that lack oxygen, which is required for the synthesis of unsaturated lipids and sterols.     

Structure and dynamics of model pore insertion into a membrane

A cylindrical transmembrane molecule is constructed by linking hydrophobic sites selected from a coarse grain model. The resulting hollow tube assembly serves as a representation of a transmembrane channel, pore, or a carbon nanotube. The interactions of a coarse grain di-myristoyl-phosphatidyl-choline hydrated bilayer with both a purely hydrophobic tube and a tube with hydrophilic caps are studied. The hydrophobic tube rotates in the membrane and becomes blocked by lipid tails after a few tens of nanoseconds. The hydrophilic sites of the capped tube stabilize it by anchoring the tube in the lipid headgroup/water interfacial region of each membrane leaflet. The capped tube remains free of lipid tails. The capped tube spontaneously conducts coarse grain water sites; the free-energy profile of this process is calculated using three different methods and is compared to the barrier for water permeation through the lipid bilayer. Spontaneous tube insertion into an undisturbed lipid bilayer is also studied, which we reported briefly in a previous publication. The hydrophobic tube submerges into the membrane core in a carpetlike manner. The capped tube laterally fuses with the closest leaflet, and then, after plunging into the membrane interior, rotates to assume a transbilayer orientation. Two lipids become trapped at the end of the tube as it penetrates the membrane. The hydrophilic headgroups of these lipids associate with the lower tube cap and assist the tube in crossing the interior of the membrane. When the rotation is complete these lipids detach from the tube caps and fuse with the lower leaflet lipids.     

Nonpolar interactions between trans-membrane helical EGF peptide and phosphatidylcholines, sphingomyelins and cholesterol. Molecular dynamics simulation studies.

A molecular dynamics simulation study of four lipid bilayers with inserted trans-membrane helical fragment of epithelial growth factor (EGF) receptor (EGF peptide) was performed. The lipid bilayers differ in their lipid composition and consist of (i) unsaturated phosphatidylcholine (palmitoyloleoylphosphatidylcholine, POPC), (ii) POPC and 20 mol% of cholesterol (Chol), (iii) sphingomyelin (SM) and 20 mol% of Chol, and (iv) SM and 50 mol% of Chol. Only 1 out of 26 residues in the EGF-peptide sequence is polar (Thr). The hydrophobic thickness of each bilayer is different but shorter than the length of the peptide and so, due to hydrophobic mismatch, the inserted peptide is tilted in each bilayer. Additionally, in the POPC bilayer, which is the thinnest, the peptide loses its helical structure in a short three-amino acid fragment. This facilitates bending of the peptide and burying all hydrophobic amino acids inside the membrane core (Figure 1(b)). Bilayer lipid composition affects interactions between the peptide and lipids in the membrane core. Chol increases packing of atoms relative to the peptide side chains, and thus increases van der Waals interactions. On average, the packing around the peptide is higher in SM-based bilayers than POPC-based bilayers but for certain amino acids, packing depends on their position relative to the bilayer center. In the bilayer center, packing is higher in POPC-based bilayers, while in regions closer to the interface packing is higher in SM-based bilayers. In general, amino acids with larger side chains interact strongly with lipids, and thus the peptide sequence is important for the pattern of interactions at different membrane depths. This pattern closely resembles the shape of recently published lateral pressure profiles [Ollila et alJ. Struct. Biol. DOI:10.1016/j.jsb.2007.01.012].     

Cationic amphiphiles and the solubilization of cholesterol crystallites in membrane bilayers

Cationic amphiphiles used for transfection can be incorporated into biological membranes. By differential scanning calorimetry (DSC), cholesterol solubilization in phospholipid membranes, in the absence and presence of cationic amphiphiles, was determined. Two different systems were studied: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)+cholesterol (1:3, POPC:Chol, molar ratio) and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-l-serine] (POPS)+cholesterol (3:2, POPS:Chol, molar ratio), which contain cholesterol in crystallite form. For the zwitterionic lipid POPC, cationic amphiphiles were tested, up to 7 mol%, while for anionic POPS bilayers, which possibly incorporate more positive amphiphiles, the fractions used were higher, up to 23 mol%. 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and DOTAP in methyl sulfate salt form (DOTAPmss) were found to cause a small decrease on the enthalpy of the cholesterol transition of pure cholesterol aggregates, possibly indicating a slight increase on the cholesterol solubilization in POPC vesicles. With the anionic system POPS:Chol, the cationic amphiphiles dramatically change the cholesterol crystal thermal transition, indicating significant changes in the cholesterol aggregates. For structural studies, phospholipids spin labeled at the 5th or 16th carbon atoms were incorporated. In POPC, at the bilayer core, the cationic amphiphiles significantly increase the bilayer packing, decreasing the membrane polarity, with the cholesterol derivative 3 beta-[N-(N',N'-dimethylaminoethane)-carbamoyl]-cholesterol (DC-chol) displaying a stronger effect. In POPS and POPS:Chol, DC-chol was also found to considerably increase the bilayer packing. Hence, exogenous cationic amphiphiles used to deliver nucleic acids to cells can change the bilayer packing of biological membranes and alter the structure of cholesterol crystals, which are believed to be the precursors to atherosclerotic lesions.     

Structural determinants of water permeability through the lipid membrane

Despite intense study over many years, the mechanisms by which water and small nonelectrolytes cross lipid bilayers remain unclear. While prior studies of permeability through membranes have focused on solute characteristics, such as size, polarity, and partition coefficient in hydrophobic solvent, we focus here on water permeability in seven single component bilayers composed of different lipids, five with phosphatidylcholine headgroups and different chain lengths and unsaturation, one with a phosphatidylserine headgroup, and one with a phosphatidylethanolamine headgroup. We find that water permeability correlates most strongly with the area/lipid and is poorly correlated with bilayer thickness and other previously determined structural and mechanical properties of these single component bilayers. These results suggest a new model for permeability that is developed in the accompanying theoretical paper in which the area occupied by the lipid is the major determinant and the hydrocarbon thickness is a secondary determinant. Cholesterol was also incorporated into DOPC bilayers and X-ray diffuse scattering was used to determine quantitative structure with the result that the area occupied by DOPC in the membrane decreases while bilayer thickness increases in a correlated way because lipid volume does not change. The water permeability decreases with added cholesterol and it correlates in a different way from pure lipids with area per lipid, bilayer thickness, and also with area compressibility.     

Cholesterol Induces Specific Spatial and Orientational Order in Cholesterol/Phospholipid Membranes

Background

In lipid bilayers, cholesterol facilitates the formation of the liquid-ordered phase and enables the formation of laterally ordered structures such as lipid rafts. While these domains have an important role in a variety of cellular processes, the precise atomic-level mechanisms responsible for cholesterol''s specific ordering and packing capability have remained unresolved.

Methodology/Principal Findings

Our atomic-scale molecular dynamics simulations reveal that this ordering and the associated packing effects in membranes largely result from cholesterol''s molecular structure, which differentiates cholesterol from other sterols. We find that cholesterol molecules prefer to be located in the second coordination shell, avoiding direct cholesterol-cholesterol contacts, and form a three-fold symmetric arrangement with proximal cholesterol molecules. At larger distances, the lateral three-fold organization is broken by thermal fluctuations. For other sterols having less structural asymmetry, the three-fold arrangement is considerably lost.

Conclusions/Significance

We conclude that cholesterol molecules act collectively in lipid membranes. This is the main reason why the liquid-ordered phase only emerges for Chol concentrations well above 10 mol% where the collective self-organization of Chol molecules emerges spontaneously. The collective ordering process requires specific molecular-scale features that explain why different sterols have very different membrane ordering properties: the three-fold symmetry in the Chol-Chol organization arises from the cholesterol off-plane methyl groups allowing the identification of raft-promoting sterols from those that do not promote rafts.     

Lipid traffic: the ABC of transbilayer movement

Membrane lipids do not spontaneously exchange between the two leaflets of lipid bilayers because the polar headgroups cannot cross the hydrophobic membrane interior. Cellular membranes, notably eukaryotic plasma membranes, are equipped with special proteins that actively translocate lipids from one leaflet to the other. In addition, cellular membranes contain proteins that facilitate a passive equilibration of lipids between the two membrane halves. In recent years, a growing number of proteins have been put forward as lipid translocators or facilitators. Unexpectedly, some of these appear to be required for efficient translocation of lipids lacking bulky headgroups, like cholesterol and fatty acids. The candidate lipid translocators identified so far belong to large protein families whose other members include pumps for amphiphilic molecules like bile salts and drugs.     

Location of the bioactive pentacyclic triterpene ursolic acid in the membrane. A molecular dynamics study

Ursolic acid (URS), an ursane-representative bioactive pentacyclic triterpene, is a plant secondary metabolite presenting a great number of pharmacological beneficial properties. Due to the prominent hydrophobic character of URS and its high phospholipid/water partition coefficient, some of its possible effects on biological systems might be related to its capacity to interact with and locate into the membrane as well as interact specifically with its components. In this work, we have studied the location and orientation of URS in the membrane by molecular dynamics simulations. At the end of the simulation, URS locates near the surface in vicinity to the phospholipid headgroups but its orientation depends on lipid composition, its final average orientation being a nearly parallel one in POPC but a nearly perpendicular one in POPC/POPE/POPG/PSM/Chol. Furthermore, in the complex lipid system URS seems to interact specifically with POPE, PSM, and Chol excluding POPG from its surroundings, which could lead to phase separation and domain formation. The different disposition of URS in the membrane and its specific interaction with certain lipid types could lead to a significant perturbation of the membrane structure. The important pharmacological activities of URS would rely on the effects it exerts on the membrane structure in general and the existence of specific interactions with specific lipids in particular.     

Oxygen permeability of the lipid bilayer membrane made of calf lens lipids

The oxygen permeability coefficient across the membrane made of the total lipid extract from the plasma membrane of calf lens was estimated from the profile of the oxygen transport parameter (local oxygen diffusion-concentration product) and compared with those estimated for membranes made of an equimolar 1-palmitoyl-2-oleoylphosphatidylcholine/cholesterol (POPC/Chol) mixture and of pure POPC. Profiles of the oxygen transport parameter were obtained by observing the collision of molecular oxygen with nitroxide radical spin labels placed at different depths in the membrane using the saturation-recovery EPR technique and were published by us earlier (J. Widomska, M. Raguz, J. Dillon, E. R. Gaillard, W. K. Subczynski, Biochim. Biophys. Acta. 1768 (2007) 1454-1465). At 35 °C, the estimated oxygen permeability coefficients were 51.3, 49.7, and 157.4 cm/s for lens lipid, POPC/Chol, and POPC membranes, respectively (compared with 53.3 cm/s for a water layer with the same thickness as a membrane). Membrane permeability significantly decreases at lower temperatures. In the lens lipid membrane, resistance to the oxygen transport is located in and near the polar headgroup region of the membrane to the depth of the ninth carbon, which is approximately where the steroid-ring structure of cholesterol reaches into the membrane. In the central region of the membrane, oxygen transport is enhanced, significantly exceeding that in bulk water. It is concluded that the high level of cholesterol in lens lipids is responsible for these unique membrane properties.     

The effect of synthetic polymers on the electrical and permeability properties of lipid membranes

1. The effect of two series of hydrophilic and hydrophobic polymers on the stability, conductivity and permeability towards water and leucine of black lipid membranes and liposomes is reported. 2. The changes in properties of these membrane preparations is related to bulk phase viscosity and dielectric measurements together with monolayer studies. 3. The hydrophobic polymers dramatically increase membrane stability, had no effect on conductivity, but increased the permeability coefficient of leucine. 4. The hydrophilic polymers produced minor, but significant changes to membrane properties. 5. It is concluded that not only basic polymers but also neutral and acidic macromolecules can interact strongly with lipid membranes.     

Binding of antibiotic amphotericin B to lipid membranes: a 1H NMR study

The (1)H NMR technique was applied to study binding of AmB, an antifungal drug, to lipid membranes formed with egg yolk phosphatidylcholine. The analysis of (1)H NMR spectra of liposomes, containing also cholesterol and ergosterol (at 40 mol%), shows that AmB binds preferentially to the polar headgroups. Such a binding restricts molecular motion of the choline fragment in the hydrophilic region at the surface of liposomes but increases the segmental motional freedom in the hydrophobic core. The same effects are also observed in the sterol-containing membranes, except that the effect on the hydrophobic core was exclusively observed in the membranes containing ergosterol.     

Cholesterol sulfate fluidizes the sterol fraction of the stratum corneum lipid phase and increases its permeability

Desulfation of cholesterol sulfate (CholS) to cholesterol (Chol) is an important event in epidermal homeostasis and necessary for stratum corneum (SC) barrier function. The CholS/Chol ratio decreases during SC maturation but remains high in pathological conditions, such as X-linked ichthyosis, characterized by dry and scaly skin. The aim of this study was to characterize the influence of the CholS/Chol molar ratio on the structure, dynamics, and permeability of SC lipid model mixtures. We synthesized deuterated CholS and investigated lipid models with specifically deuterated components using ²H solid-state NMR spectroscopy at temperatures from 25°C to 80°C. Although the rigid acyl chains in ceramides and fatty acids remained essentially rigid upon variation of the CholS/Chol ratio, both sterols were increasingly fluidized in lipid models containing higher CholS concentrations. We also show the X-ray repeat distance of the lipid lamellar phase (105 Å) and the orthorhombic chain packing of the ceramide’s acyl chains and long free fatty acids did not change upon the variation of the CholS content. However, the Chol phase separation visible in models with high Chol concentration disappeared at the 50:50 CholS/Chol ratio. This increased fluidity resulted in higher permeabilities to model markers of these SC models. These results reveal that a high CholS/Chol ratio fluidizes the sterol fraction and increases the permeability of the SC lipid phase while maintaining the lamellar lipid arrangement with an asymmetric sterol distribution.     

Oxygen permeability of the lipid bilayer membrane made of calf lens lipids

The oxygen permeability coefficient across the membrane made of the total lipid extract from the plasma membrane of calf lens was estimated from the profile of the oxygen transport parameter (local oxygen diffusion-concentration product) and compared with those estimated for membranes made of an equimolar 1-palmitoyl-2-oleoylphosphatidylcholine/cholesterol (POPC/Chol) mixture and of pure POPC. Profiles of the oxygen transport parameter were obtained by observing the collision of molecular oxygen with nitroxide radical spin labels placed at different depths in the membrane using the saturation-recovery EPR technique and were published by us earlier (J. Widomska, M. Raguz, J. Dillon, E. R. Gaillard, W. K. Subczynski, Biochim. Biophys. Acta. 1768 (2007) 1454-1465). At 35 degrees C, the estimated oxygen permeability coefficients were 51.3, 49.7, and 157.4 cm/s for lens lipid, POPC/Chol, and POPC membranes, respectively (compared with 53.3 cm/s for a water layer with the same thickness as a membrane). Membrane permeability significantly decreases at lower temperatures. In the lens lipid membrane, resistance to the oxygen transport is located in and near the polar headgroup region of the membrane to the depth of the ninth carbon, which is approximately where the steroid-ring structure of cholesterol reaches into the membrane. In the central region of the membrane, oxygen transport is enhanced, significantly exceeding that in bulk water. It is concluded that the high level of cholesterol in lens lipids is responsible for these unique membrane properties.     

Amphipathic-Lipid-Packing-Sensor interactions with lipids assessed by atomistic molecular dynamics

The Amphipathic-Lipid-Packing-Sensor (ALPS) motif targets the protein ArfGAP1 to curved membranes during vesicle formation in the Golgi apparatus. ALPS specifically recognizes lipid packing defects due to the positive curvature of budding vesicles. In this work we assessed the microscopic interactions between ALPS and two phospholipid membranes at different degrees of lipid packing by explicit molecular dynamics (MD). Simulations were performed within loosely packed membranes composed of a mixture of dioleoylphosphatidylcholine (DOPC)/dioleoylglycerol (DOG) at a molar ratio 85:15. Some other simulations were performed in pure DOPC for which lipid packing is tighter. We show that the presence of DOG causes packing defects at the phosphate level and thereby modifies some properties of the bilayer. This leads to a higher hydration of the lipid headgroups. When embedded in a membrane with such defects, ALPS displays a higher degree of conformational flexibility than in a more packed membrane. We propose that lipid packing sensing by ALPS may have an entropic origin and that its flexibility is a key feature.