Organosolv pretreatment of lignocellulosic biomass for enzymatic hydrolysis

Production of ethanol by bioconversion of lignocellulosic biomass has attracted much interest in recent years. However, the pretreatment process for increasing the enzymatic digestibility of cellulose has become a key step in commercialized production of cellulosic ethanol. During the last decades, many pretreatment processes have been developed for decreasing the biomass recalcitrance, but only a few of them seem to be promising. From the point of view for integrated utilization of lignocellulosic biomass, organosolv pretreatment provides a pathway for biorefining of biomass. This review presents the progress of organosolv pretreatment of lignocellulosic biomass in recent decades, especially on alcohol, organic acid, organic peracid and acetone pretreatments, and corresponding action mechanisms. Evaluation and prospect of organosolv pretreatment were performed. Finally, some recommendations for future investigation of this pretreatment method were given.     

High-throughput microplate technique for enzymatic hydrolysis of lignocellulosic biomass

Several factors will influence the viability of a biochemical platform for manufacturing lignocellulosic based fuels and chemicals, for example, genetically engineering energy crops, reducing pre-treatment severity, and minimizing enzyme loading. Past research on biomass conversion has focused largely on acid based pre-treatment technologies that fractionate lignin and hemicellulose from cellulose. However, for alkaline based (e.g., AFEX) and other lower severity pre-treatments it becomes critical to co-hydrolyze cellulose and hemicellulose using an optimized enzyme cocktail. Lignocellulosics are appropriate substrates to assess hydrolytic activity of enzyme mixtures compared to conventional unrealistic substrates (e.g., filter paper, chromogenic, and fluorigenic compounds) for studying synergistic hydrolysis. However, there are few, if any, high-throughput lignocellulosic digestibility analytical platforms for optimizing biomass conversion. The 96-well Biomass Conversion Research Lab (BCRL) microplate method is a high-throughput assay to study digestibility of lignocellulosic biomass as a function of biomass composition, pre-treatment severity, and enzyme composition. The most suitable method for delivering milled biomass to the microplate was through multi-pipetting slurry suspensions. A rapid bio-enzymatic, spectrophotometric assay was used to determine fermentable sugars. The entire procedure was automated using a robotic pipetting workstation. Several parameters that affect hydrolysis in the microplate were studied and optimized (i.e., particle size reduction, slurry solids concentration, glucan loading, mass transfer issues, and time period for hydrolysis). The microplate method was optimized for crystalline cellulose (Avicel) and ammonia fiber expansion (AFEX) pre-treated corn stover.     

纤维素酶与木质纤维素生物降解转化的研究进展

利用纤维素酶将预处理后的秸秆降解成可发酵性单糖,然后发酵生产所需的液体燃料及化工产品的技术,对于我国解决能源、环境、人口就业等难题有着巨大的积极影响。在木质纤维素生物降解转化工艺中,减少纤维素酶用量及提高酶解效率是降低木质纤维素降解成本的关键。纤维素酶系和木质纤维素酶水解技术的改进需要深入了解纤维素酶系统的组成及其协同作用、纤维素酶的结构与功能以及纤维素酶的生产技术。将就以上几个方面的研究进展进行讨论,并深入探讨了纤维素酶糖化能力的评价方法。     

Epidemic based modeling of enzymatic hydrolysis of lignocellulosic biomass

An epidemic based model was developed to describe the enzymatic hydrolysis of a lignocellulosic biomass, dilute sulfuric acid pretreated corn stover. The process of substrate getting adsorbed and digested by enzyme was simulated as susceptibles getting infected by viruses and becoming removed and recovered. This model simplified the dynamic enzyme “infection” process and the catalysis of cellulose into a two‐parameter controlled, enzyme behavior guided mechanism. Furthermore, the model incorporates the adsorption block by lignin and inhibition effects on cellulose catalysis. The model satisfactorily predicted the enzyme adsorption and hydrolysis, negative role of lignin, and inhibition effects over hydrolysis for a broad range of substrate and enzyme loadings. Sensitivity analysis was performed to evaluate the incorporation of lignin and other inhibition effects. Our model will be a useful tool for evaluating the effects of parameters during hydrolysis and guide a design strategy for continuous hydrolysis and the associated process control. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1021–1028, 2014     

High-throughput enzymatic hydrolysis of lignocellulosic biomass via in-situ regeneration

The high cost of lignocellulolytic enzymes is one of the main barriers towards the development of economically competitive biorefineries. Enzyme engineering can be used to significantly increase the production rate as well as specific activity of enzymes. However, the success of enzyme optimization efforts is currently limited by a lack of robust high-throughput (HTP) cellulase screening platforms for insoluble pretreated lignocellulosic substrates. We have developed a cost-effective microplate based HTP enzyme-screening platform for ionic liquid (IL) pretreated lignocellulose. By performing in-situ biomass regeneration in micro-volumes, we can volumetrically meter biomass (sub-mg loading) and also precisely control the amount of residual IL for engineering novel IL-tolerant cellulases. Our platform only requires straightforward liquid-handling steps and allows the integration of biomass regeneration, washing, saccharification, and imaging steps in a single microtiter plate. The proposed method can be used to screen individual cellulases as well as to develop novel cellulase cocktails.     

Fuzzy logic feedback control for fed-batch enzymatic hydrolysis of lignocellulosic biomass

A fuzzy logic feedback control system was developed for process monitoring and feeding control in fed-batch enzymatic hydrolysis of a lignocellulosic biomass, dilute acid-pretreated corn stover. Digested glucose from hydrolysis reaction was assigned as input while doser feeding time and speed of pretreated biomass were responses from fuzzy logic control system. Membership functions for these three variables and rule-base were created based on batch hydrolysis data. The system response was first tested in LabVIEW environment then the performance was evaluated through real-time hydrolysis reaction. The feeding operations were determined timely by fuzzy logic control system and efficient responses were shown to plateau phases during hydrolysis. Feeding of proper amount of cellulose and maintaining solids content was well balanced. Fuzzy logic proved to be a robust and effective online feeding control tool for fed-batch enzymatic hydrolysis.     

Enhanced enzymatic hydrolysis of lignocellulosic biomass pretreated by low-pressure steam autohydrolysis

Summary The use of low-pressure steam autohydrolysis in the pretreatment of corn stover and hybrid poplar has been assessed. In terms of yield of prehydrolyzed solids, minimal by-product formation and extent of subsequent enzymatic saccharification, the results of low-pressure steam pretreatment were found to be as good as or better than those reported for more severe pretreatment processes. Almost complete saccharification of the cellulose in the prehydrolyzed biomass solids was obtained within 24h with a commercial cellulase preparation — Celluclast. The presence of grinding elements (glass beads) during the enzymatic hydrolysis was found to increase the extent of saccharification by 40% to 50% over controls without any grinding elements.     

Extrapolation of design strategies for lignocellulosic biomass conversion to the challenge of plastic waste

The goal of cost-effective production of fuels and chemicals from biomass has been a substantial driver of the development of the field of metabolic engineering. The resulting design principles and procedures provide a guide for the development of cost-effective methods for degradation, and possibly even valorization, of plastic wastes. Here, we highlight these parallels, using the creative work of Lonnie O''Neal (Neal) Ingram in enabling production of fuels and chemicals from lignocellulosic biomass, with a focus on ethanol production as an exemplar process.     

Steam pretreatment of lignocellulosic material for enhanced enzymatic hydrolysis

Pretreatment methods were compared with steam explosion, and differing views on the relative importance of mechanical and chemical effects were outlined. Hydrolysis was desirable; pyrolysis was undesirable. The effects of initial moisture content on steam consumption, mechanism and rate of heat transfer, pentosan solubilization, and subsequent glucose yield were summarized. The insignificant effect, after treatment at 240 degrees C, of 90% pressure bleed-down before explosion on subsequent simultaneous saccharification and fermentation (SSF) yields was described. Treatment at 190 degrees C with complete bleed-down (no explosion), when compared with that at 240 degrees C with explosion from full pressure, showed at least as good solubilizatoin of pentosan, enzymatic hydrolysis, and SSF but showed greater pentosan destruction for the same degree of pentosan removal. Water washing of unexploded steamed aspenwood chips was at least as efficient as that of similarly treated but exploded chips. Scanning electron micrographs of unexploded chips showed extensive rupturing of vessel pit membranes and other morphological features associated with steam-exploded wood. Neither the explosion nor the high temperatures (above 190 degrees C) are necessary.     

Compatible ionic liquid-cellulases system for hydrolysis of lignocellulosic biomass

Ionic liquids (ILs) have been increasingly recognized as novel solvents for dissolution and pretreatment of cellulose. However, cellulases are inactivated in the presence of ILs, even when present at low concentrations. To more fully exploit the benefits of ILs it is critical to develop a compatible IL‐cellulases system in which the IL is able to effectively solubilize and activate the lignocellulosic biomass, and the cellulases possess high stability and activity. In this study, we investigated the stability and activity of a commercially available cellulases mixture in the presence of different concentrations of 1‐ethyl‐3‐methylimidazolium acetate ([Emim][OAc]). A mixture of cellulases and β‐glucosidase (Celluclast1.5L, from Trichoderma reesei, and Novozyme188, from Aspergillus niger, respectively) retained 77% and 65% of its original activity after being pre‐incubated in 15% and 20% (w/v) IL solutions, respectively, at 50°C for 3 h. The cellulases mixture also retained high activity in 15% [Emim][OAc] to hydrolyze Avicel, a model substrate for cellulose analysis, with conversion efficiency of approximately 91%. Notably, the presence of different amounts of yellow poplar lignin did not interfere significantly with the enzymatic hydrolysis of Avicel. Using this IL‐cellulase system (15% [Emim][OAc]), the saccharification of yellow poplar biomass was also significantly improved (33%) compared to the untreated control (3%) during the first hour of enzymatic hydrolysis. Together, these findings provide compelling evidence that [Emim][OAc] was compatible with the cellulase mixture, and this compatible IL‐cellulases system is promising for efficient activation and hydrolysis of native biomass to produce biofuels and co‐products from the individual biomass components. Bioeng. 2011; 108:1042–1048. © 2010 Wiley Periodicals, Inc.     

Development and validation of a kinetic model for enzymatic saccharification of lignocellulosic biomass

A multireaction kinetic model was developed for closed-system enzymatic hydrolysis of lignocellulosic biomass such as corn stover. Three hydrolysis reactions were modeled, two heterogeneous reactions for cellulose breakdown to cellobiose and glucose and one homogeneous reaction for hydrolyzing cellobiose to glucose. Cellulase adsorption onto pretreated lignocellulose was modeled via a Langmuir-type isotherm. The sugar products of cellulose hydrolysis, cellobiose and glucose, as well as xylose, the dominant sugar prevalent in most hemicellulose hydrolyzates, were assumed to competitively inhibit the enzymatic hydrolysis reactions. Model parameters were estimated from experimental data generated using dilute acid pretreated corn stover as the substrate. The model performed well in predicting cellulose hydrolysis trends at experimental conditions both inside and outside the design space used for parameter estimation and can be used for in silico process optimization.     

Enhancing the enzymatic hydrolysis of lignocellulosic biomass by increasing the carboxylic acid content of the associated lignin

To assess the effects that the physical and chemical properties of lignin might have on the enzymatic hydrolysis of pretreated lignocellulosic substrates, protease treated lignin (PTL) and cellulolytic enzyme lignin (CEL) fractions, isolated from steam and organosolv pretreated corn stover, poplar, and lodgepole pine, were prepared and characterized. The adsorption of cellulases to the isolated lignin preparations corresponded to a Langmuir adsorption isotherm. It was apparent that, rather than the physical properties of the isolated lignin, the carboxylic acid functionality of the isolated lignin, as determined by FTIR and NMR spectroscopy, had much more of an influence when lignin was added to typical hydrolysis of pure cellulose (Avicel). An increase in the carboxylic content of the lignin preparation resulted in an increased hydrolysis yield. These results suggested that the carboxylic acids within the lignin partially alleviate non-productive binding of cellulases to lignin. To try to confirm this possible mechanism, dehydrogenative polymers (DHP) of monolignols were synthesized from coniferyl alcohol (CA) and ferulic acid (FA), and these model compounds were added to a typical enzymatic hydrolysis of Avicel. The DHP from FA, which was enriched in carboxylic acid groups compared with the DHP from CA, adsorbed a lower mount of cellulases and did not decrease hydrolysis yields when compared to the DHP from CA, which decreased the hydrolysis of Avicel by 8.4%. Thus, increasing the carboxylic acid content of the lignin seemed to significantly decrease the non-productive binding of cellulases and consequently increased the enzymatic hydrolysis of the cellulose.     

Co‐hydrolysis of lignocellulosic biomass for microbial lipid accumulation

The herbaceous perennial energy crops miscanthus, giant reed, and switchgrass, along with the annual crop residue corn stover, were evaluated for their bioconversion potential. A co‐hydrolysis process, which applied dilute acid pretreatment, directly followed by enzymatic saccharification without detoxification and liquid–solid separation between these two steps was implemented to convert lignocellulose into monomeric sugars (glucose and xylose). A factorial experiment in a randomized block design was employed to optimize the co‐hydrolysis process. Under the optimal reaction conditions, corn stover exhibited the greatest total sugar yield (glucose + xylose) at 0.545 g g^?1 dry biomass at 83.3% of the theoretical yield, followed by switch grass (0.44 g g^?1 dry biomass, 65.8% of theoretical yield), giant reed (0.355 g g^?1 dry biomass, 64.7% of theoretical yield), and miscanthus (0.349 g g^?1 dry biomass, 58.1% of theoretical yield). The influence of combined severity factor on the susceptibility of pretreated substrates to enzymatic hydrolysis was clearly discernible, showing that co‐hydrolysis is a technically feasible approach to release sugars from lignocellulosic biomass. The oleaginous fungus Mortierella isabellina was selected and applied to the co‐hydrolysate mediums to accumulate fungal lipids due to its capability of utilizing both C5 and C6 sugars. Fungal cultivations grown on the co‐hydrolysates exhibited comparable cell mass and lipid production to the synthetic medium with pure glucose and xylose. These results elucidated that combining fungal fermentation and co‐hydrolysis to accumulate lipids could have the potential to enhance the utilization efficiency of lignocellulosic biomass for advanced biofuels production. Biotechnol. Bioeng. 2013; 110: 1039–1049. © 2012 Wiley Periodicals, Inc.     

Laboratory-scale method for enzymatic saccharification of lignocellulosic biomass at high-solids loadings

Background  

Screening new lignocellulosic biomass pretreatments and advanced enzyme systems at process relevant conditions is a key factor in the development of economically viable lignocellulosic ethanol. Shake flasks, the reaction vessel commonly used for screening enzymatic saccharifications of cellulosic biomass, do not provide adequate mixing at high-solids concentrations when shaking is not supplemented with hand mixing.     

A review of thermal-chemical conversion of lignocellulosic biomass in China

Biomass, a renewable, sustainable and carbon dioxide neutral resource, has received widespread attention in the energy market as an alternative to fossil fuels. Thermal-chemical conversion of biomass to produce biofuels is a promising technology with many commercial applications. This paper reviewed the state-of-the-art research and development of thermal-chemical conversion of biomass in China with a special focus on gasification, pyrolysis, and catalytic transformation technologies. The advantages and disadvantages, potential of future applications, and challenges related to these technologies are discussed. Conclusively, these transformation technologies for the second-generation biofuels with using non-edible lignocellulosic biomass as feedstocks show prosperous perspective for commercial applications in near future.     

Hemicellulases and auxiliary enzymes for improved conversion of lignocellulosic biomass to monosaccharides

Background  

High enzyme loading is a major economic bottleneck for the commercial processing of pretreated lignocellulosic biomass to produce fermentable sugars. Optimizing the enzyme cocktail for specific types of pretreated biomass allows for a significant reduction in enzyme loading without sacrificing hydrolysis yield. This is especially important for alkaline pretreatments such as Ammonia fiber expansion (AFEX) pretreated corn stover. Hence, a diverse set of hemicellulases supplemented along with cellulases is necessary for high recovery of monosaccharides.     

Microwave-assisted conversion of lignocellulosic biomass into furans in ionic liquid

Production of 5-hydroxymethylfurfural (HMF) and furfural from lignocellulosic biomass was studied in ionic liquid in the presence of CrCl₃ under microwave irradiation. Corn stalk, rice straw and pine wood treated under typical reaction conditions produced HMF and furfural in yields of 45–52% and 23–31%, respectively, within 3 min. This method should be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.