Preparation of single-stranded DNA from PCR products with streptavidin magnetic beads

The preparation of single-stranded DNA from double-stranded PCR products is an essential step in the identification of aptamers by Systematic Evolution of Ligands by EXponential enrichment (SELEX). The most widely used method for producing single-stranded DNA is alkaline denaturation of biotinylated PCR products attached to streptavidin-coated magnetic beads. Recently, it has been suggested that this method may be unsuitable due to the release of interfering amounts of streptavidin and biotinylated DNA. In this article, the alkaline method is compared with a thermal method that is known to release significant amounts of streptavidin and biotinylated DNA. Results show that trace amounts of streptavidin and biotinylated DNA are released in the alkaline method, but this can be curtailed by preconditioning the beads in aqueous sodium hydroxide. The main product in the alkaline method is single-stranded DNA, which is produced in high yield.     

Microwave irradiation in label-detection for diagnostic DNA-in situ hybridization.

Summary A DNA-in situ hybridization protocol was adapted for application to sections of routinely processed paraffin embedded material. This protocol was developed previously for detecting DNA-virus infected cells in whole cell preparations and employs biotinylated DNA as probe. Three different biotin detection methods were optimized and applied. The first uses streptavidin and a biotinylated complex of alkaline phosphatase, the second consists of an immunogold-silver staining, and the third of a peroxidase technique using a silver amplification. The alkaline phosphatase method was the most rapid, and as sensitive as the immunogold-silver staining. The peroxidase method was the most sensitive. Microwave irradiation was applied to the different incubation steps of these three detection methods. Short incubations with microwave irradiation gave very poor results when peroxidase labelled antibodies were used. Short incubation with microwave irradiation gave results comparable to those obtained with conventional incubations, when streptavidin, antibiotin, complexed alkaline phosphatase, or gold labelled goat antirabbit were used. It was thus shown that microwave irradiation creates the possibility of a very rapid label-detection for nonradioactive DNA-in situ hybridization.     

MagSNiPer: a new single nucleotide polymorphism typing method based on single base extension, magnetic separation, and chemiluminescence

We have developed a new method for typing single nucleotide polymorphisms (SNPs), MagSNiPer, based on single base extension, magnetic separation, and chemiluminescence. Single base nucleotide extension reaction is performed with a biotinylated primer whose 3' terminus is contiguous to the SNP site with a tag-labeled ddNTP. Then the primers are captured by magnetic-coated beads with streptavidin, and unincorporated labeled ddNTP is removed by magnetic separation. The magnetic beads are incubated with anti-tag antibody conjugated with alkaline phosphatase. After the removal of excess conjugates by magnetic separation, SNP typing is performed by measuring chemiluminescence. The incorporation of labeled ddNTP is monitored by chemiluminescence induced by alkaline phosphatase. MagSNiPer is a simple and robust SNP typing method with a wide dynamic range and high sensitivity. Using MagSNiPer, we could perform SNP typing with as little as 10(-17) mol of template DNA.     

Comparison of the performance of the borax buffer-based HRP-enhanced reagent and the ‘Lumi-Phos 530’ chemiluminescence systems in the detection of biotinylated DNA

A comparison of two chemiluminescence methods, the borax buffer-based HRP-enhanced reagent and Lumi-Phos 530, applied to the detection of a biotinylated 30-mer DNA slot blotted onto a nylon membrane, is presented. A streptavidin–HRP and streptavidin–ALP mediated detection system was used. The HRP-enhanced system is up to 15-fold greater with respect to the signal/background ratios than the Lumi-Phos 530 system at 0.5 μg biotinylated DNA with at least a two-fold improvement in detection sensitivity for 0.5 ng biotinylated DNA.     

Recombinant Gaussia luciferase with a reactive cysteine residue for chemical conjugation: Expression, purification and its application for bioluminescent immunoassays

The mutated recombinant Gaussia luciferase (hgGLase) having the hinge sequence with a reactive cysteine residue at the carboxyl terminal region was purified from Escherichia coli cells by nickel-chelate affinity chromatography and hydrophobic chromatography. The biotinylated hgGLase (Biotin-hgGLase) was prepared by chemical conjugation with a maleimide activated biotin and apply to bioluminescent immunoassay. In the streptavidin and biotin complex system using Biotin-hgGLase, the measurable range of α-fetoprotein as a model analyte was 0.02–100 ng/ml with the coefficient of variation between 2.5% and 5.2%. The sensitivity of Biotin-hgGLase was similar to that by using the detection system of aequorin, alkaline phosophatase and horseradish peroxidase as a label enzyme.     

时间分辨荧光分析法在DNA探针检测中的初步应用

应用时间分辨荧光技术进行核酸杂交分析,选用自制整合剂异硫氰酸苯基-EDTA将铕离子标记连接于链霉亲和素分子中,通过光化学反应制备生物素标记pUC118DNA探针,与固定在聚苯乙烯微滴板中的靶DNA杂交后,以铕离子Eu(3+)标记的链霉亲和素为检测物,检测靶DNA的含量,可检测到30pg的靶DNA．     

Detection of sub-picogram quantities of specific DNA sequences on blot hybridization with biotinylated probes.

A sensitive method for detecting biotinylated DNA probes on dot and Southern blots is described which is based on the principle outlined by Leary et al (1). This system has two main components: detection of biotinylated DNA by a two-step procedure with streptavidin and poly(alkaline phosphatase); and blocking background with Tween 20. 32fg and 80fg of lambda phage DNA was detected on dot and Southern blot hybridizations respectively. 150fg of beta-globin was detected on Southern blots of genomic DNA. This method is fast, reproducible and can detect single copy genes in 0.25 micrograms genomic DNA on Southern blots.     

Use of biotinylated inorganic pyrophosphatase for detection of biotin bound to solid support

A colorimetric procedure to detect biotin bound to microtiter plates with a sensitivity down to 10(-16) mol was developed using biotinylated inorganic pyrophosphatase of Escherichia coli. Reaction of pyrophosphatase with 1 mM N-biotinyl-6-aminocaproic acid N-hydroxy-sulfonosuccinimide ester yielded a stable 87% active enzyme containing 5.6 mol biotin/mol. In the measurements of human immunoglobulin G, a biotinylated pyrophosphatase.streptavidin complex provided a sensitivity superior to that of conventional enzyme immunoassay due to low nonspecific binding. The new procedure was also more sensitive compared with that using biotinylated alkaline phosphatase. Together with high thermostability of pyrophosphatase and its substrate, low background staining allowed measurement of enzymatic activity to be performed at 60 degrees C for 4 h resulting in a marked increase in assay sensitivity.     

Novel biotinylated nucleotide--analogs for labeling and colorimetric detection of DNA.

A series of dATP and dCTP nucleotide analogs have been synthesized which are modified by attachment of aliphatic linkers containing a functional group to the amino-nitrogen at the hydrogen bonding positions of the bases, that is, at the 6-position of adenine and the 4-position of cytosine. These nucleotides are incorporated into DNA probes by standard nick-translation protocols. DNA probes labeled with biotin derivatives of these nucleotides are effectively hybridized to target DNA sequences and can be detected by a streptavidin and calf intestinal alkaline phosphatase conjugate with a sensitivity (0.25 pg DNA) sufficient for reproducible and rapid detection of single copy genes in a Southern blot of mammalian DNA. Also, a procedure has been developed to allow reprobing of nylon filters that have been hybridized with biotinylated probes and developed with the streptavidin/alkaline phosphatase conjugate and a standard dye system.     

Protein engineering of streptavidin for in vivo assembly of streptavidin beads

Escherichia coli was engineered to intracellularly manufacture streptavidin beads. Variants of streptavidin (monomeric, core and mature full length streptavidin) were C-terminally fused to PhaC, the polyester granule forming enzyme of Cupriavidus necator. All streptavidin fusion proteins mediated formation of the respective granules in E. coli and were overproduced at the granule surface. The monomeric streptavidin showed biotin binding (0.7 ng biotin/microg bead protein) only when fused as single-chain dimer. Core streptavidin and the corresponding single-chain dimer mediated a biotin binding of about 3.9 and 1.5 ng biotin/mug bead protein, respectively. However, biotin binding of about 61 ng biotin/mug bead protein with an equilibrium dissociation constant (KD) of about 4 x 10(-8)M was obtained when mature full length streptavidin was used. Beads displaying mature full length streptavidin were characterized in detail using ELISA, competitive ELISA and FACS. Immobilisation of biotinylated enzymes or antibodies to the beads as well as the purification of biotinylated DNA was used to demonstrate the applicability of these novel streptavidin beads. This study proposes a novel method for the cheap and efficient one-step production of versatile streptavidin beads by using engineered E. coli as cell factory.     

Hybrid selection of mRNA with biotinylated DNA

A novel, convenient, and highly efficient hybrid selection procedure is described. The method utilizes the polymerase chain reaction (PCR) in which one of two primers is biotinylated at the 5'-terminus. The concentration of the biotinylated primer is 100 times that of the other to synthesize biotinylated single-stranded DNA (asymmetric PCR). After hybridization of the biotinylated DNA with mRNA in solution, streptavidin agarose is used to trap the hybrid duplex of mRNA.DNA-biotin onto the solid matrix. The selected mRNA is then eluted from the streptavidin agarose. The quantitative physical recovery of selected mRNA is about 70% with about 33% retention of biological activity.     

Coupling biomolecules to fullerenes through a molecular adapter

A novel biotinylated fullerene has been synthesized to facilitate the attachment of biotin-conjugated proteins to C(60) through the use of streptavidin as a molecular adapter. The strong biotin-streptavidin interaction enables the attachment of fullerenes to streptavidin and, because of the availability of four biotin-binding sites on streptavidin, to biotinylated biomolecules. The feasibility of this approach is demonstrated by using biotinylated alkaline phosphatase. Due to the insolubility of fullerenes in aqueous media, the immobilized enzyme can be eventually recovered by simple centrifugation with no significant loss in activity.     

Detection of Proteins Binding to the Promoter Region DNA Using a Nonradioactive Gel-Retardation Assay

Binding of nuclear proteins to the promoter region was studied by a nonradioactive gel-retardation assay. The procedure uses biotinylated oligonucleotides in combination with streptavidin and biotin-conjugated alkaline phosphatase. This method offers sensitivity comparable to radioactive detection, and the advantage of the high stability of probes. Moreover the hazards of usage associated with radiation are avoided.     

Streptavidin-aequorin fusion protein for bioluminescent immunoassay

The fusion protein of streptavidin to aequorin (STA-AQ) was highly purified from inclusion bodies in Escherichia coli cells and applied to a bioluminescent sandwich immunoassay. α-Fetoprotein (AFP), which is a serological marker of liver cancer, was used as a model analyte to test STA-AQ in an immunoassay. The measurable range of AFP by the sandwich immunoassay, using the complex of STA-AQ and the biotinylated anti-AFP antibody, was 0.02-200 ng/mL with an average coefficient of variation of 4.9%. The detection sensitivity with the complex of STA-AQ and the biotinylated anti-AFP antibody was similar to that with the complex of biotinylated aequorin, streptavidin and the biotinylated anti-AFP antibody. STA-AQ would be a useful reporter protein for immunoassays.     

The effect of avidin-biotin interactions in detection systems for in situ hybridization.

The effect of avidin-biotin interactions in several detection systems for the non-radioactive in situ hybridization (ISH) technique was studied in a model system using a transitional cell carcinoma line and a biotinylated DNA probe. We performed fluorescence ISH to unravel the individual steps in a sensitive and frequently used amplification method which makes use of the alternating cytochemical detection layers of fluorescein isothiocyanate-conjugated avidin (AvFITC) and biotinylated goat anti-avidin (BioGAA) antibodies to detect the hybridized and biotinylated probe. Our experiments revealed that BioGAA antibodies bind with their antigen binding sites and not with their biotin moieties to avidin molecules that have already interacted with the DNA probe. The probable working mechanism of this amplification method is presented in a model. Furthermore, we used a peroxidase staining technique to compare with each other the sensitivity of several other detection systems in which avidin-biotin interactions play an important role, e.g., the avidin-biotinylated peroxidase complex (ABC) system. The experiments show that avidin molecules can not be efficiently used to interconnect two biotinylated molecular layers, since their introduction leads to firmly closed cytochemical networks. Such a closed network is already formed between the hybridized and biotinylated DNA probe and a first detection layer of avidin molecules, as appears from the finding that biotinylated molecules could hardly be coupled to these avidin molecules in a following detection layer. Therefore, the results presented here provide us with new insight into the molecular basis of cytochemical network formation. This will enable us to choose the proper procedures for increasing the sensitivity of ISH detection systems.     

Immunosensor for Mycobacterium tuberculosis on screen-printed carbon electrodes

In this work, two methods have been compared to produce enzymatic voltammetric immunosensors for the determination of Mycobacterium tuberculosis antigens (Ag360 and Ag231), using a pre-oxidised screen-printed carbon electrode (SPCE) as a signal transduction element. The enzyme alkaline phosphatase (AP) was used in combination with the substrate 3-indoxyl phosphate (3-IP). In one design, the immune complexes between M. tuberculosis antigens and monoclonal antibodies against M. tuberculosis were formed out of the electrode surface. Then, the immune complexes were captured by biotinylated rabbit anti-M. tuberculosis antibodies, immobilised on the streptavidin modified SPCEs through the streptavidin:biotin reaction. Finally, an alkaline phosphatase (AP) labelled rabbit IgG anti-mouse immunoglobulin G was used as a detector antibody. In the other design, the M. tuberculosis antigens were captured by monoclonal antibodies against M. tuberculosis, which were immobilised on the electrode surface through the reaction with rabbit IgG passively adsorbed on the SPCEs. The biotinylated rabbit anti-M. tuberculosis antibodies were used with an alkaline phosphatase labelled streptavidin as detector antibodies. The best results for M. tuberculosis antigen determination were obtained using the immunosensor on the streptavidin modified SPCEs and the immune complexes between antigen Ag231 and monoclonal antibodies MabF184-3, with a detection limit of 1.0 ng/ml. The immunosensor was also applied to Ag231 spiked proteic matrices.     

A New Approach to Revealing Point Mutations in DNA Analyzed by Colorimetric Detection

A new approach to detection of point mutations in an amplified DNA was developed. The approach is based on highly selective ligation (T4 DNA ligase) of a tandem of short oligonucleotides one of which contains the biotin group. The ligation product is formed only when the hybridization complex DNA/tandem is formed and the tandem is perfect. The hybridization complex DNA/(biotinylated ligation product) was separated from the biotinylated component of the tandem by UV‐immobilization of the reaction mixture on a nylon membrane. The immobilized hybridization complex was detected colorimetrically by a streptavidin‐alkaline phosphatase cojugate with a chromogenic substrate.     

Human papillomavirus detection by non isotopic in situ hybridization, in situ hybridization with signal amplification and in situ polymerase chain reaction

Classical in situ hybridization (ISH) with biotinylated probes makes it possible to detect and localize human papillomavirus (HPV) nucleic acid sequences in cytological and histological materials. This method is however of limited value in the detection of a few copies of the virus. Moreover the specificity of such a technique is not always convincing when ISH signals are small and/or of low intensity. Recently, much attention has been focused on the utility of the in vitro polymerase chain reaction (PCR) and especially on PCR-single strand conformation polymorphism (SSCP) to amplify small amounts of viral DNA with accurate hybrid specificity. But the latter method requires nucleic acid extraction and tissue destruction. Thus, correlation between the PCR results and histological findings is not possible. Hence, the aim of our current study was to apply to HeLa cells and cervical formalin-fixed and paraffin-embedded biopsies, a novel procedure of ISH signal amplification, the catalyzed signal amplification (CSA). Such a procedure is based on the deposition of streptavidin-horseradish peroxidase catalyzing the deposition of biotinylated tyramide molecules on the location of the probed target. The biotin accumulation is then detected with streptavidin peroxidase and diaminobenzidine. The results were compared with those obtained by direct and indirect in situ PCR. The catalysed signal amplification successfully increased the sensitivity and efficiency of ISH for the detection of rare sequences in HPV infected cells and histological materials. Such a method was found simpler and faster than in situ PCR and tissue morphology was better preserved.     

Affinity chromatography of DNA labeled with chemically cleavable biotinylated nucleotide analogs

DNA labeled with the chemically cleavable biotinylated nucleotide Bio-12-SS-dUTP was chromatographed on biotin cellulose affinity columns using either avidin or streptavidin as the affinity reagent. Although both proteins were equally effective in binding the Bio-12-SS-DNA to the affinity resin, two important differences were found. First, nonbiotinylated DNA bound to avidin, but not to streptavidin, in buffers containing 50 mM NaCl. Second, Bio-12-SS-DNA was released much more slowly from the streptavidin affinity column than from the avidin column upon washing with buffer containing dithiothreitol. This difficulty in reducing the disulfide bond of Bio-12-SS-DNA bound to streptavidin is most likely due to steric protection of the disulfide bond by the protein. This conclusion is supported by our finding that DNA labeled with another biotinylated nucleotide analog, Bio-19-SS-dUTP, is rapidly and efficiently recovered from a streptavidin column. In Bio-19-SS-DNA, the distance between the disulfide bond and the biotin group is approximately 10 A greater than that in Bio-12-SS-DNA. Therefore, Bio-19-SS-dUTP and streptavidin form the basis of an efficient affinity system for the isolation and subsequent recovery of biotinylated DNA in the presence of low ionic strength buffers.