A microprocessor-controlled photometer for monitoring microbial growth in multi-welled plates

Multi-welled microtitre plates provide a convenient means of handling 'large block' multifactorial experiments with microbial cultures. An inexpensive instrument, termed a 'Biophotometer', has been designed to monitor microbial growth in each well, by transmitted light measurements. Optional microcomputer control is employed to facilitate scanning of plates and data handling. A unique method for agitating cultures is incorporated into the system. Typical results are presented to illustrate the versatility of this system.     

Single-cell microliter-droplet screening system (MISS Cell): An integrated platform for automated high-throughput microbial monoclonal cultivation and picking

Solid plates have been used for microbial monoclonal isolation, cultivation, and colony picking since 1881. However, the process is labor- and resource-intensive for high-throughput requirements. Currently, several instruments have been integrated for automated and high-throughput picking, but complicated and expensive. To address these issues, we report a novel integrated platform, the single-cell microliter-droplet screening system (MISS Cell), for automated, high-throughput microbial monoclonal colony cultivation and picking. We verified the monoclonality of droplet cultures in the MISS Cell and characterized culture performance. Compared with solid plates, the MISS Cell generated a larger number of monoclonal colonies with higher initial growth rates using fewer resources. Finally, we established a workflow for automated high-throughput screening of Corynebacterium glutamicum using the MISS Cell and identified high glutamate-producing strains. The MISS Cell can serve as a universal platform to efficiently produce monoclonal colonies in high-throughput applications, overcoming the limitations of solid plates to promote rapid development in biotechnology.     

Dissociated flexor digitorum brevis myofiber culture system--a more mature muscle culture system

Considerable knowledge regarding skeletal muscle physiology and disease has been gleaned from cultured myoblastic cell lines or isolated primary myoblasts. Such muscle cultures can be induced to differentiate into multinucleated myotubes that become striated. However they in general do not fully mature and therefore do not model mature muscle. Contrastingly, fresh and cultured dissociated adult mouse flexor digitorum brevis (FDB) myofibers have been studied for many years. We aimed to investigate the possibility of using the FDB myofiber culture system for drug screening and thus long-term cultures of enzymatically dissociated FDB myofibers were established in 96-well plates. Ca2+ handling experiments were used to investigate the functional state of the myofibers. Imaging of intracellular Ca2+ during electric field stimulation revealed that calcium handling was maintained throughout the culture period of at least 8 days. Western blot and immunostaining analysis showed that the FDB cultures maintained expression of mature proteins throughout the culture period, including alpha-sarcoglycan, dystrophin, fast myosin heavy chain and skeletal muscle alpha-actin. The high levels of the fetal proteins cardiac alpha-actin and utrophin, seen in cultured C2C12 myotubes, were absent in the FDB cultures. The expression of developmentally mature proteins and the absence of fetal proteins, in addition to the maintenance of normal calcium handling, highlights the FDB culture system as a more mature and perhaps more relevant culture system for the study of adult skeletal muscle function. Moreover, it may be a useful system for screening therapeutic agents for the treatment of skeletal muscle disorders.     

Oscillometric instrument for the non-invasive detection of low-level microbial activity. Part 2: Growth characteristics, detection limits and impedimetric assays

Instrument performance and application was evaluated with a variety of microbial suspensions. Data were compared with those obtainable from current commercial apparatus in terms of resolution and detection times. Trials with growing and non-growing cultures indicated periodic synchronous ion exchange processes. Media composition, particularly salt and nutrient ratios, remain crucial to early and rapid detection of viable microbial activity at low concentrations. With appropriate conditions very significant improvements in detection times with typical detection thresholds of 300 min for start concentrations of 10(2) are shown. It is concluded that with regard to resolution and stability, the system out-performs current systems and is superior in terms of potential test costs, sample handling and sample transport.     

Rapid Technique for Enumeration and Isolation of Peroxidase-producing Microorganisms

Peroxidase-positive microorganisms were enumerated on agar plates by use of a p-anisidine-H(2)O(2) spray. Combined with replica-plating, the same technique allowed the selective isolation of peroxidase-producing microbial cultures.     

Best practices for detecting and mitigating the risk of cell culture contaminants

A variety of biological and chemical contaminants can adversely impact cells in culture, ranging from outright destruction of the culture, mutation, phenotypic changes to relatively minor changes in morphology, or growth rate. There are various approaches to detecting and mitigating the risk of biological or microbial contaminants in cell cultures, and these are discussed in this article. Chemical contaminants typically arise from improper handling or sourcing of cell culture reagents, glassware, or other types of consumables. These and other sources of chemical contaminants of cell cultures are discussed. The occurrence of chemical contamination is mitigated through adherence to best practices in sourcing and handling of such materials and by avoiding the use of volatile solvents within incubators that are used for maintaining cell cultures.     

Use of substrate responsive-direct viable counts to visualize naphthalene degrading bacteria in a coal tar-contaminated groundwater microbial community

A microscopy-based method was developed to distinguish naphthalene-degrading bacteria within the microbial community of a coal tar-contaminated groundwater system. Pure cultures of Pseudomonas putida NCIB 9816-4 were used to develop the substrate responsive-direct viable count (SR-DVC) method. Cells were concentrated on membrane filters, placed on agar plates of Stanier's minimal basal salts media containing antibiotics (nalidixic acid, piromidic acid, pipemidic acid, and cephalexin), and exposed to vapors of naphthalene. Following brief incubation, samples were fixed in 2% formaldehyde and examined by epifluorescent microscopy. Pure cultures displayed the expected cell elongation response to the SR-DVC assay and required a minimum incubation time of 9 h for differentiation of elongated cells. When applied to groundwater samples from the study site, naphthalene responsive cells in the groundwater community were easily distinguished from unresponsive cells and debris (350+/-180 substrate responsive cells/ml, relative to negative controls with no added growth substrate). In an attempt to reduce background counts of elongated bacteria and fungi, the SR-DVC procedure was modified by adding a wash step prior to incubation and a fungal inhibitor, cyclohexamide, to the plates. When groundwater samples were subjected to the modified procedure, only cells in washed samples showed a significant response to naphthalene (150+/-25 cells/ml), indicating the presence of inhibitory substances in the groundwater. Variations in response of the groundwater microbial community to the two SR-DVC procedures suggest that subsurface conditions (microbial and chemical composition) vary temporally. SR-DVC allows the phenotypes of individual naturally occurring cells to be assessed.     

A Rapid and Easy Method for the Detection of Microbial Cellulases on Agar Plates Using Gram’s Iodine

Screening for cellulase-producing microorganisms is routinely done on carboxymethylcellulose (CMC) plates. The culture plates are flooded either with 1% hexadecyltrimethyl ammonium bromide or with 0.1% Congo red followed by 1 M NaCl. In both cases, it takes a minimum of 30 to 40 minutes to obtain the zone of hydrolysis after flooding, and the hydrolyzed area is not sharply discernible. An improved method is reported herein for the detection of extracellular cellulase production by microorganisms by way of plate assay. In this method, CMC plates were flooded with Gram's iodine instead of the reagents just mentioned. Gram's iodine formed a bluish-black complex with cellulose but not with hydrolyzed cellulose, giving a sharp and distinct zone around the cellulase-producing microbial colonies within 3 to 5 minutes. The new method is rapid and efficient; therefore, it can be easily performed for screening large numbers of microbial cultures of both bacteria and fungi. This is the first report on the use of Gram's iodine for the detection of cellulase production by microorganisms using plate assay.     

A Method of Profiling Microbial Communities Based on a Most-Probable-Number Assay That Uses BIOLOG Plates and Multiple Sole Carbon Sources

A new approach to the community-level BIOLOG assay was proposed. This assay, which we call the BIOLOG-MPN assay, is a most-probable-number (MPN) assay that uses BIOLOG plates and multiple sole carbon sources, and the profiles obtained by this assay consist of MPNs estimated for the substrates in the BIOLOG plates. In order to demonstrate the performance of the BIOLOG-MPN assay, it was applied to pure cultures, model bacterial communities that contain two strains in different ratios, and microbial community samples. MPN estimation using BIOLOG plates worked well for the substrates on which utilizers can grow at a sufficiently high rate for color development under the conditions of the assay procedure. Furthermore, the results obtained using model communities showed that the MPNs obtained reflected the mixing ratios of pure cultures in the model communities. The profiles obtained using model communities and community samples were differentiated properly by statistical analyses. The results suggest that the BIOLOG-MPN assay is a promising procedure for obtaining a quantitative picture of the community structure.     

A method of profiling microbial communities based on a most-probable-number assay that uses BIOLOG plates and multiple sole carbon sources.

A new approach to the community-level BIOLOG assay was proposed. This assay, which we call the BIOLOG-MPN assay, is a most-probable-number (MPN) assay that uses BIOLOG plates and multiple sole carbon sources, and the profiles obtained by this assay consist of MPNs estimated for the substrates in the BIOLOG plates. In order to demonstrate the performance of the BIOLOG-MPN assay, it was applied to pure cultures, model bacterial communities that contain two strains in different ratios, and microbial community samples. MPN estimation using BIOLOG plates worked well for the substrates on which utilizers can grow at a sufficiently high rate for color development under the conditions of the assay procedure. Furthermore, the results obtained using model communities showed that the MPNs obtained reflected the mixing ratios of pure cultures in the model communities. The profiles obtained using model communities and community samples were differentiated properly by statistical analyses. The results suggest that the BIOLOG-MPN assay is a promising procedure for obtaining a quantitative picture of the community structure.     

A simple and effective plating method to screen polycyclic aromatic hydrocarbon-degrading bacteria under various redox conditions

Agar plates with a polycyclic aromatic hydrocarbon (PAH) layer have been used to screen for microorganisms that degrade PAHs, leaving clear zones around colonies; however, there are several problems with previous methods such as undesired contamination in the fume hood and difficulty in controlling the amount of PAH on the plates. In this study, we developed a modified screening method to address the drawbacks encountered with previous screening methods. A uniform white layer of PAHs was generated by spreading PAHs dissolved in volatile solvents over a surface of solidified agar medium, followed by the evaporation of the solvents. An inoculation was then performed by spreading a molten agar medium containing microbial samples over the solidified agar medium with a PAH layer. Subsequently, the white PAH layer migrated to the surface of the molten agar medium. This essential modification enabled us not only to solve problems of the previous screening methods but also to prepare an agar plate with a PAH layer without a complicated experimental scheme in the anaerobic chamber. After solidification of the molten agar medium and incubation of the plates, clear zones were successfully detected around colonies with aerobic and anaerobic PAH-degrading microbial cultures.     

Environmental microbial contamination in a stem cell bank

AIM: The aim of this study was to evaluate the main environmental microbial contaminants of the clean rooms in our stem cell bank. METHODS AND RESULTS: We have measured the microbial air contamination by both passive and active air sampling and the microbial monitoring of surfaces by means of Rodac plates. The environmental monitoring tests were carried out in accordance with the guidelines of European Pharmacopeia and US Pharmacopeia. The micro-organisms were identified by means of an automated system (VITEK 2). During the monitoring, the clean rooms are continually under good manufacturing practices specifications. The most frequent contaminants were Gram-positive cocci. CONCLUSIONS: The main contaminants in our stem cell bank were coagulase-negative staphylococci and other opportunistic human pathogens. In order to assure the levels of potential contamination in both embryonic and adult stem cell lines, a continuous sampling of air particles and testing for viable microbiological contamination is necessary. SIGNIFICANCE AND IMPACT OF THE STUDY: This study is the first evaluation of the environmental contaminants in stem cell banks and can serve as initial evaluation for these establishments. The introduction of environmental monitoring programmes in the processing of stem cell lines could diminish the risk of contamination in stem cell cultures.     

Establishing oil-degrading biofilms on gravel particles and glass plates

A method is described for “artificially” establishing biofilms rich in hydrocarbon degrading bacteria on gravel particles and glass plates. The microbial consortia in the biofilms included in additions, filamentous cyanobacteria, picoplankton and diatoms. Phototrophic microorganisms were pioneer colonizers. Hydrocarbon utilizing bacteria, namely Acinetobacter calcoaceticus and nocardioforms were in part attached to filaments of cyanobacteria. In batch cultures, it was shown that those artificial biofilms had an attenuation effect on crude-oil in contaminated sea water samples. The potential use of these biofilms for preparing trickling filters (gravel particles), and in bioreactors (glass plates) for attenuating hydrocarbons in oily liquid wastes before their disposal in the open environment is suggested and discussed.     

Eco-physiological Characterization of Soil Bacterial Populations in Different States of Growth

The method based on characterization of microbial populations in terms of their growth rate in agar plates has been used for testing the prediction of the theory of r- and K-selection in a microbial community from a tropical soil. Conditions which could lead bacterial populations to grow exponentially or to enter into a stationary phase were obtained by growing soil microbial populations in a chemostat and in a chemostat with recycle, respectively. Significant differences in population distribution patterns were observed by comparing results from the two growth systems. When soil community was grown in a chemostat and subjected specifically to well-defined r- and K-conditions, stable associations of organisms with r- and K-type characteristics developed as a consequence of environmental pressure. In contrast, when cultivated in chemostat with recycle under the same r- and K-conditions imposed on chemostat cultures, distribution patterns of r- and K-selected populations appeared very little affected by changes in substrate availability.     

Application of Replica Plating and Computer Analysis for Rapid Identification of Bacteria in Some Foods: I. Identification Scheme

A method was devised and tested for a quantitative identification of microbial flora in foods. The colonies developing on the initial isolation plates were picked with sterile toothpicks and inoculated on a master plate in prearranged spacing and order. The growth on the master plates was then replicated on a series of solid-agar plates containing differential or selective agents. The characteristic growth and physiological responses of microbial isolates to penicillin, tylosin, vancomycin, streptomycin, chloramphenicol, neomycin, colistin, and to S S Agar, Staphylococcus Medium No. 110, and Potato Dextrose Agar were recorded, together with Gram reaction and cell morphology. This information was then fed into an IBM 1410 digital computer which grouped and analyzed each isolate into 10 microbial genera, or groups, according to the identification key. The identification scheme was established by use of reference culture studies and from the literature. This system was used to analyze the microbial flora in dover sole (Microstomus pacificus) and ground beef. The method described in this article enables one to examine large numbers of microbial isolates with simplicity.     

Maximization of steady-state bacterial production in a chemostat with pH and substrate control.

This analytical study deals with the steady-state behavior and control of microbial growth in continuous cultures. A second order Haldane-Monod model of continuous cultures is used as a basis for study of the effects of the adjustment of pH by the addition of acidic (or basic) materials. The treatment of a hydrogen ion concentration, in addition to substrate and microbial concentrations as state variables, results in a third order system of equations describing the process. The analysis of the system in equilibrium yields several admissible steady states, that is, steady states which satisfy all constraints. An optimal control problem is formulated and subsequently solved to maximize steady-state microbial production.     

A modified method for the detection of microbial proteases on agar plates using tannic acid

In routine assay for the screening of microbes producing proteases, 10% trichloroaceticacid (TCA) is flooded on the milk agar plates after inoculation and required incubation to precipitate the protein. However, the clarity of the hydrolyzed zone is not very sharp and distinct. We herein present an improved assay for detecting the presence of extracellular protease from microorganisms on agar plates. In this method 10% tannic acid is flooded on the milk agar plate (in place of, TCA) to observe the zone of hydrolysis. Tannic acid sharply increases the colour intensity of the plate, as it favours the precipitation of the unhydrolyzed protein in the plate, thereby improving the contrast between the intact zones and the enzymatic lyses zones of the substrate. Our results indicate that this method is useful to detect extracellular proteases produced by both fungi as well as bacteria. The method used in the present study is sensitive, and can be easily performed for screening of large number of microbial cultures. This is the first report on the use of tannic acid for the detection of microbial proteases.     

A modified method for the detection of microbial proteases on agar plates using tannic acid

In routine assay for the screening of microbes producing proteases, 10% trichloroaceticacid (TCA) is flooded on the milk agar plates after inoculation and required incubation to precipitate the protein. However, the clarity of the hydrolyzed zone is not very sharp and distinct. We herein present an improved assay for detecting the presence of extracellular protease from microorganisms on agar plates. In this method 10% tannic acid is flooded on the milk agar plate (in place of, TCA) to observe the zone of hydrolysis. Tannic acid sharply increases the colour intensity of the plate, as it favours the precipitation of the unhydrolyzed protein in the plate, thereby improving the contrast between the intact zones and the enzymatic lyses zones of the substrate. Our results indicate that this method is useful to detect extracellular proteases produced by both fungi as well as bacteria. The method used in the present study is sensitive, and can be easily performed for screening of large number of microbial cultures. This is the first report on the use of tannic acid for the detection of microbial proteases.     

Microorganisms in Heat Supply Systems and Internal Corrosion of Steel Pipelines

In laboratory experiments with batch cultures of thermophilic microorganisms isolated from urban heat supply systems, the growth of sulfate-reducing, iron-oxidizing, and iron-reducing bacteria was found to accelerate the corrosion rate of the steel-3 plates used in pipelines. In the absence of bacteria and dissolved oxygen, minimal corrosion was determined. The aforementioned microorganisms, as well as sulfur-oxidizing bacteria, were found to be widespread in water and corrosion deposits in low-alloy steel pipelines (both delivery and return) of the Moscow heat networks, as well as in the corrosion deposits on the steel-3 plates in a testing unit supplied with the network water. The microorganisms were found in samples with a water pH ranging from 8.1 to 9.6 and a temperature lower than 90°C. Magnetite, lepidocrocite, goethite, and X-ray amorphous ferric oxide were the corrosion products identified on the steel-3 plates, as well as siderite, aragonite, and S⁰. The accumulation of corrosion deposits and variation in the total and local corrosion of the steel plates in a testing unit were considered in terms of the influence of microbial processes.