Biosynthesis of dTDP-3-acetamido-3,6-dideoxy-alpha-D-glucose

Derivatives of 3-amino-3,6-dideoxyhexoses are widespread in Nature. They are part of the repeating units of lipopolysaccharide O-antigens, of the glycan moiety of S-layer (bacterial cell surface layer) glycoproteins and also of many antibiotics. In the present study, we focused on the elucidation of the biosynthesis pathway of dTDP-alpha-D-Quip3NAc (dTDP-3-acetamido-3,6-dideoxy-alpha-D-glucose) from the Gram-positive, anaerobic, thermophilic organism Thermoanaerobacterium thermosaccharolyticum E207-71, which carries Quip3NAc in its S-layer glycan. The biosynthesis of dTDP-alpha-D-Quip3NAc involves five enzymes, namely a transferase, a dehydratase, an isomerase, a transaminase and a transacetylase, and follows a pathway similar to that of dTDP-alpha-D-Fucp3NAc (dTDP-3-acetamido-3,6-dideoxy-alpha-D-galactose) biosynthesis in Aneurinibacillus thermoaerophilus L420-91(T). The ORFs (open reading frames) of interest were cloned, overexpressed in Escherichia coli and purified. To elucidate the enzymatic cascade, the different products were purified by HPLC and characterized by NMR spectroscopy. The initiating reactions catalysed by the glucose-1-phosphate thymidylyltransferase RmlA and the dTDP-D-glucose-4,6-dehydratase RmlB are well established. The subsequent isomerase was shown to be capable of forming a dTDP-3-oxo-6-deoxy-D-glucose intermediate from the RmlB product dTDP-4-oxo-6-deoxy-D-glucose, whereas the isomerase involved in the dTDP-alpha-D-Fucp3NAc pathway synthesizes dTDP-3-oxo-6-deoxy-D-galactose. The subsequent reaction steps of either pathway involve a transaminase and a transacetylase, leading to the specific production of nucleotide-activated 3-acetamido-3,6-dideoxy-alpha-D-glucose and 3-acetamido-3,6-dideoxy-alpha-D-galactose respectively. Sequence comparison of the ORFs responsible for the biosynthesis of dTDP-alpha-D-Quip3NAc revealed homologues in Gram-negative as well as in antibiotic-producing Gram-positive bacteria. There is strong evidence that the elucidated biosynthesis pathway may also be valid for LPS (lipopolysaccharide) O-antigen structures and antibiotic precursors.     

The crystal structure of PfFabZ, the unique beta-hydroxyacyl-ACP dehydratase involved in fatty acid biosynthesis of Plasmodium falciparum

The unique beta-hydroxyacyl-ACP dehydratase in Plasmodium falciparum, PfFabZ, is involved in fatty acid biosynthesis and catalyzes the dehydration of beta-hydroxy fatty acids linked to acyl carrier protein. The structure was solved by single anomalous dispersion (SAD) phasing using a quick-soaking experiment with potassium iodide and refined to a resolution of 2.1 A. The crystal structure represents the first structure of a Plasmodium beta-hydroxyacyl-ACP dehydratase with broad substrate specificity. The asymmetric unit contains a hexamer that appears as a trimer of dimers. Each dimer shows the known "hot dog" fold that has been observed in only a few other protein structures. Each of the two independent active sites in the dimer is formed by equal contributions from both subunits. The active site is mainly hydrophobic and looks like an L-shaped tunnel. The catalytically important amino acids His 133 and Glu 147' (from the other subunit), together with His98', form the only hydrophilic site in this tunnel. The inner end of the active site tunnel is closed by the phenyl ring of Phe 169, which is located in a flexible, partly visible loop. In order to explain the acceptance of substrates longer than ~C-7, the phenyl ring must move away to open the tunnel. The present structure supports an enzymatic mechanism consisting of an elimination reaction catalyzed by His 133 and Glu147'. 3-decynoyl-N-acetylcysteamine, an inhibitor known to interact with the E. coli dehydratase/isomerase, turned out to interact covalently with PfFabZ. A first model of PfFabZ with this potent inhibitor is presented.     

Protein clefts in molecular recognition and function.

One of the primary factors determining how proteins interact with other molecules is the size of clefts in the protein's surface. In enzymes, for example, the active site is often characterized by a particularly large and deep cleft, while interactions between the molecules of a protein dimer tend to involve approximately planar surfaces. Here we present an analysis of how cleft volumes in proteins relate to their molecular interactions and functions. Three separate datasets are used, representing enzyme-ligand binding, protein-protein dimerization and antibody-antigen complexes. We find that, in single-chain enzymes, the ligand is bound in the largest cleft in over 83% of the proteins. Usually the largest cleft is considerably larger than the others, suggesting that size is a functional requirement. Thus, in many cases, the likely active sites of an enzyme can be identified using purely geometrical criteria alone. In other cases, where there is no predominantly large cleft, chemical interactions are required for pinpointing the correct location. In antibody-antigen interactions the antibody usually presents a large cleft for antigen binding. In contrast, protein-protein interactions in homodimers are characterized by approximately planar interfaces with several clefts involved. However, the largest cleft in each subunit still tends to be involved.     

Characterization of the N-terminal domain of NrtC, the ATP-binding subunit of ABC-type nitrate transporter of the cyanobacterium Phormidium laminosum

The N-terminal domain of NrtC, the ATP-binding subunit of nitrate/nitrite ABC-transporter in the cyanobacterium Phormidium laminosum, has been expressed in Escherichia coli as a histidine-tagged fusion protein (His(6)NrtC1). Binding of ATP to the pure His(6)NrtC1 was characterized using the nucleotide analogue TNP-ATP [2'(3')-O-(2,4,6-trinitrophenyl) adenosine 5'-triphosphate]. Fluorescence assays showed that His(6)NrtC1 specifically binds Mg(2+) TNP-ATP with high affinity, binding being dependent on protein concentration. The presence of ATP prevents the covalent modification of His(6)NrtC1 by fluorescein 5'-isothiocyanate (FITC), suggesting that this probe reacts at the nucleotide-binding site of NrtC. The active form of the truncated NrtC is a dimer that shows high affinity for TNP-ATP (K(d)=0.76+/-0.1 microM). Evidence for the presence of two nucleotide-binding sites per dimer protein is given. Our results indicate that nucleotide binding is strongly dependent on the dimerization of NrtC and that the N-terminal domain of the protein contains the binding site for ATP. No ATPase activity catalyzed in vitro by the truncated subunit was detected.     

Function of Escherichia coli biotin carboxylase requires catalytic activity of both subunits of the homodimer

Biotin carboxylase catalyzes the ATP-dependent carboxylation of biotin and is one component of the multienzyme complex acetyl-CoA carboxylase that catalyzes the first committed step in fatty acid synthesis. The Escherichia coli biotin carboxylase is readily isolated from the other components of the acetyl-CoA carboxylase complex such that enzymatic activity is retained. The three-dimensional structure of biotin carboxylase, determined by x-ray crystallography, demonstrated that the enzyme is a homodimer consisting of two active sites in which each subunit contains a complete active site. To understand how each subunit contributes to the overall function of biotin carboxylase, we made hybrid molecules in which one subunit had a wild-type active site, and the other subunit contained an active site mutation known to significantly affect the activity of the enzyme. One of the two genes encoded a poly-histidine tag at its N terminus, whereas the other gene had an N-terminal FLAG epitope tag. The two genes were assembled into a mini-operon that was induced to give high level expression of both enzymes. "Hybrid" dimers composed of one subunit with a wild-type active site and a second subunit having a mutant active site were obtained by sequential chromatographic steps on columns of immobilized nickel chelate and anti-FLAG affinity matrices. In vitro kinetic studies of biotin carboxylase dimers in which both subunits were wild type revealed that the presence of the N-terminal tags did not alter the activity of the enzyme. However, kinetic assays of hybrid dimer biotin carboxylase molecules in which one subunit had an active site mutation (R292A, N290A, K238Q, or E288K) and the other subunit had a wild-type active site resulted in 39-, 28-, 94-, and 285-fold decreases in the activity of these enzymes, respectively. The dominant negative effects of these mutant subunits were also detected in vivo by monitoring the rate of fatty acid biosynthesis by [(14)C]acetate labeling of cellular lipids. Expression of the mutant biotin carboxylase genes from an inducible arabinose promoter resulted in a significantly reduced rate of fatty acid synthesis relative to the same strain that expressed the wild type gene. Thus, both the in vitro and in vivo data indicate that both subunits of biotin carboxylase are required for activity and that the two subunits must be in communication during enzyme function.     

Removing a hydrogen bond in the dimer interface of Escherichia coli manganese superoxide dismutase alters structure and reactivity

Among manganese superoxide dismutases, residues His30 and Tyr174 are highly conserved, forming part of the substrate access funnel in the active site. These two residues are structurally linked by a strong hydrogen bond between His30 NE2 from one subunit and Tyr174 OH from the other subunit of the dimer, forming an important element that bridges the dimer interface. Mutation of either His30 or Tyr174 in Escherichia coli MnSOD reduces the superoxide dismutase activity to 30--40% of that of the wt enzyme, which is surprising, since Y174 is quite remote from the active site metal center. The 2.2 A resolution X-ray structure of H30A-MnSOD shows that removing the Tyr174-->His30 hydrogen bond from the acceptor side results in a significant displacement of the main-chain segment containing the Y174 residue, with local rearrangement of the protein. The 1.35 A resolution structure of Y174F-MnSOD shows that disruption of the same hydrogen bond from the donor side has much greater consequences, with reorientation of F174 having a domino effect on the neighboring residues, resulting in a major rearrangement of the dimer interface and flipping of the His30 ring. Spectroscopic studies on H30A, H30N, and Y174F mutants show that (like the previously characterized Y34F mutant of E. coli MnSOD) all lack the high pH transition of the wt enzyme. This observation supports assignment of the pH sensitivity of MnSOD to coordination of hydroxide ion at high pH rather than to ionization of the phenolic group of Y34. Thus, mutations near the active site, as in the Y34F mutant, as well as at remote positions, as in Y174F, similarly affect the metal reactivity and alter the effective pK(a) for hydroxide ion binding. These results imply that hydrogen bonding of the H30 imidazole N--H group plays a key role in substrate binding and catalysis.     

Effects of chemical modifications of crotoxin B, the phospholipase A(2) subunit of crotoxin from Crotalus durissus terrificus snake venom, on its enzymatic and pharmacological activities.

Crotoxin B, the basic Asp49-PLA(2) subunit from crotoxin, the main component of Crotalus durissus terrificus venom, displays myotoxic, edema-inducing, bactericidal (upon Escherichia coli), liposomal-disrupting and anticoagulant activities. Chemical modifications of His (with 4-bromophenacyl bromide, BPB), Tyr (with 2-nitrobenzenesulphonyl fluoride, NBSF), Trp (with o-nitrophenylsulphenyl chloride, NPSC) and Lys (with acetic anhydride) residues of this protein, in addition to cleavage with cyanogen bromide (CNBr) and inhibition with ethylenediaminetetraacetic acid (EDTA), were carried out in order to study their effects on enzymatic and pharmacological activities. Lethality was reduced after modification of His or Lys residues, as well as after cleavage with CNBr, while enzymatic activity was completely abolished after modification of His or incubation with EDTA. Modification of Lys or Tyr, or cleavage with CNBr, partially reduced enzymatic activity. Anticoagulant activity was modified similarly to enzymatic activity, evidencing the dependency of this pharmacological effect on catalytic activity. Myotoxicity was reduced after modification of His or Lys, as well as after cleavage with CNBr, whereas EDTA reduced this effect to a lesser extent. Bactericidal effect was significantly reduced only after modification of Lys and after cleavage with CNBr. Edema-inducing activity was partially inhibited after treatment with EDTA and strongly reduced after acetylation of Lys residues and cleavage with CNBr, being only partially reduced after His alkylation. On the other hand, liposome disrupting activity was only partially reduced after modification of His and Tyr or after cleavage with CNBr. Modification of Trp residue partially reduced lethality and myotoxicity but did not affect enzymatic or anticoagulant activities. These data indicate that enzymatic activity is relevant for some pharmacological effects induced by crotoxin B (mainly lethal, myotoxic and anticoagulant activities), and also evidence that this subunit of crotoxin displays regions different from the active catalytic site which are involved in some of the toxic and pharmacological effects induced by this phospholipase A(2).     

Crystal structure of D-psicose 3-epimerase from Agrobacterium tumefaciens and its complex with true substrate D-fructose: a pivotal role of metal in catalysis, an active site for the non-phosphorylated substrate, and its conformational changes

D-psicose, a rare sugar produced by the enzymatic reaction of D-tagatose 3-epimerase (DTEase), has been used extensively for the bioproduction of various rare carbohydrates. Recently characterized D-psicose 3-epimerase (DPEase) from Agrobacterium tumefaciens was found to belong to the DTEase family and to catalyze the interconversion of D-fructose and D-psicose by epimerizing the C-3 position, with marked efficiency for D-psicose. The crystal structures of DPEase and its complex with the true substrate D-fructose were determined; DPEase is a tetramer and each monomer belongs to a TIM-barrel fold. The active site in each subunit is distinct from that of other TIM-barrel enzymes, which use phosphorylated ligands as the substrate. It contains a metal ion with octahedral coordination to two water molecules and four residues that are absolutely conserved across the DTEase family. Upon binding of D-fructose, the substrate displaces water molecules in the active site, with a conformation mimicking the intermediate cis-enediolate. Subsequently, Trp112 and Pro113 in the beta4-alpha4 loop undergo significant structural changes, sealing off the active site. Structural evidence and site-directed mutagenesis of the putative catalytic residues suggest that the metal ion plays a pivotal role in catalysis by anchoring the bound D-fructose, and Glu150 and Glu244 carry out an epimerization reaction at the C-3 position.     

Structure of a NifS homologue: X-ray structure analysis of CsdB, an Escherichia coli counterpart of mammalian selenocysteine lyase

Escherichia coli CsdB, a NifS homologue with a high specificity for L-selenocysteine, is a pyridoxal 5'-phosphate (PLP)-dependent dimeric enzyme that belongs to aminotransferases class V in fold-type I of PLP enzymes and catalyzes the decomposition of L-selenocysteine into selenium and L-alanine. The crystal structure of the enzyme has been determined by the X-ray crystallographic method of multiple isomorphous replacement and refined to an R-factor of 18.7% at 2.8 A resolution. The subunit structure consists of three parts: a large domain of an alpha/beta-fold containing a seven-stranded beta-sheet flanked by seven helices, a small domain containing a four-stranded antiparallel beta-sheet flanked by three alpha-helices, and an N-terminal segment containing two alpha-helices. The overall fold of the subunit is similar to those of the enzymes belonging to the fold-type I family represented by aspartate aminotransferase. However, CsdB has several structural features that are not observed in other families of the enzymes. A remarkable feature is that an alpha-helix in the lobe extending from the small domain to the large domain in one subunit of the dimer interacts with a beta-hairpin loop protruding from the large domain of the other subunit. The extended lobe and the protruded beta-hairpin loop form one side of a limb of each active site in the enzyme. The most striking structural feature of CsdB lies in the location of a putative catalytic residue; the side chain of Cys364 on the extended lobe of one subunit is close enough to interact with the gamma-atom of a modeled substrate in the active site of the subunit. Moreover, His55 from the other subunit is positioned so that it interacts with the gamma- or beta-atom of the substrate and may be involved in the catalytic reaction. This is the first report on three-dimensional structures of NifS homologues.     

Intersubunit location of the active site of farnesyl diphosphate synthase: reconstruction of active enzymes by hybrid-type heteromeric dimers of site-directed mutants

Farnesyl diphosphate synthase is a homodimer of subunits having typically two aspartate-rich motifs with two sets of substrate binding sites for an allylic diphosphate and isopentenyl diphosphate per molecule of a homodimeric enzyme. To determine whether each subunit contains an independent active site or whether the active sites are created by intersubunit interaction, we constructed several expression plasmids that overproduce hybrid-type heterodimers of Bacillus stearothermophilus FPP synthases constituting different types of mutated monomers, which exhibit little catalytic activity as homodimers, by combining two tandem fps genes for the manipulated monomer subunit with a highly efficient promoter trc within an overexpression pTrc99A plasmid. A heterodimer of a combination of subunits of the wild type and of R98E, a mutant subunit which exhibits little enzymatic activity as a dimer form (R98E)(2), exhibited 78% of the activity of the wild-type homodimer enzyme, (WT)(2). Moreover, when a hybrid-type heterodimeric dimer of FPP synthase mutant subunits (R98E/F220A) was prepared, the FPP synthase activity was 18- and 390-fold of that of each of the almost inactive mutants as a dimeric enzymes, (R98E)(2) and (F220A)(2) [Koyama, T., et al. (1995) Biochem. Biophys. Res. Commun. 212, 681-686], respectively. These results suggest that the subunits of the FPP synthase interact with each other to form a shared active site in the homodimer structure rather than an independent active site in each subunit.     

Structural insights into the second step of RNA-dependent cysteine biosynthesis in archaea: crystal structure of Sep-tRNA:Cys-tRNA synthase from Archaeoglobus fulgidus

In the ancient organisms, methanogenic archaea, lacking the canonical cysteinyl-tRNA synthetase, Cys-tRNA(Cys) is produced by an indirect pathway, in which O-phosphoseryl-tRNA synthetase ligates O-phosphoserine (Sep) to tRNA(Cys) and Sep-tRNA:Cys-tRNA synthase (SepCysS) converts Sep-tRNA(Cys) to Cys-tRNA(Cys). In this study, the crystal structure of SepCysS from Archaeoglobus fulgidus has been determined at 2.4 A resolution. SepCysS forms a dimer, composed of monomers bearing large and small domains. The large domain harbors the seven-stranded beta-sheet, which is typical of the pyridoxal 5'-phosphate (PLP)-dependent enzymes. In the active site, which is located near the dimer interface, PLP is covalently bound to the side-chain of the conserved Lys209. In the proximity of PLP, a sulfate ion is bound by the side-chains of the conserved Arg79, His103, and Tyr104 residues. The active site is located deep within the large, basic cleft to accommodate Sep-tRNA(Cys). On the basis of the surface electrostatic potential, the amino acid residue conservation mapping, the position of the bound sulfate ion, and the substrate amino acid binding manner in other PLP-dependent enzymes, a binding model of Sep-tRNA(Cys) to SepCysS was constructed. One of the three strictly conserved Cys residues (Cys39, Cys42, or Cys247), of one subunit may play a crucial role in the catalysis in the active site of the other subunit.     

Crystal structures of two aromatic hydroxylases involved in the early tailoring steps of angucycline biosynthesis

Angucyclines are aromatic polyketides produced in Streptomycetes via complex enzymatic biosynthetic pathways. PgaE and CabE from S. sp PGA64 and S. sp. H021 are two related homo-dimeric FAD and NADPH dependent aromatic hydroxylases involved in the early steps of the angucycline core modification. Here we report the three-dimensional structures of these two enzymes determined by X-ray crystallography using multiple anomalous diffraction and molecular replacement, respectively, to resolutions of 1.8 A and 2.7 A. The enzyme subunits are built up of three domains, a FAD binding domain, a domain involved in substrate binding and a C-terminal thioredoxin-like domain of unknown function. The structure analysis identifies PgaE and CabE as members of the para-hydroxybenzoate hydroxylase (pHBH) fold family of aromatic hydroxylases. In contrast to phenol hydroxylase and 3-hydroxybenzoate hydroxylase that utilize the C-terminal domain for dimer formation, this domain is not part of the subunit-subunit interface in PgaE and CabE. Instead, dimer assembly occurs through interactions of their FAD binding domains. FAD is bound non-covalently in the "in"-conformation. The active sites in the two enzymes differ significantly from those of other aromatic hydroxylases. The volumes of the active site are significantly larger, as expected in view of the voluminous tetracyclic angucycline substrates. The structures further suggest that substrate binding and catalysis may involve dynamic rearrangements of the middle domain relative to the other two domains. Site-directed mutagenesis studies of putative catalytic groups in the active site of PgaE argue against enzyme-catalyzed substrate deprotonation as a step in catalysis. This is in contrast to pHBH, where deprotonation/protonation of the substrate has been suggested as an essential part of the enzymatic mechanism.     

Communication between the two active sites of glutathione S-transferase A1-1, probed using wild-type-mutant heterodimers

To study the communication between the two active sites of dimeric glutathione S-transferase A1-1, we used heterodimers containing one wild-type (WT) active site and one active site with a single mutation at either Tyr9, Arg15, or Arg131. Tyr9 and Arg15 are part of the active site of the same subunit, while Arg131 contributes to the active site of the opposite subunit. The V(max) values of Tyr9 and Arg15 mutant enzymes were less than 2% that of WT, indicating their importance in catalysis. In contrast, V(max) values of Arg131 mutant enzymes were about 50-90% of that of WT enzyme while K(m)(GSH) values were approximately 3-8 times that of WT, suggesting that Arg131 plays a role in glutathione binding. The mutant enzyme (with a His(6) tag) and the WT enzyme (without a His(6) tag) were used to construct heterodimers (WT-Y9F, WT-Y9T, WT-R15Q, WT-R131M, WT-R131Q, and WT-R131E) by incubation of a mixture of wild-type and mutant enzyme at pH 7.5 in buffer containing 1,6-hexanediol, followed by dialysis against buffer lacking the organic solvent. The resultant heterodimers were separated from the wild-type and mutant homodimers using chromatography on nickel-nitrilotriacetic acid agarose. The V(max) values of all heterodimers were lower than expected for independent active sites. Our experiments demonstrate that mutation of an amino acid residue in one active site affects the activity in the other active site. Modeling studies show that key amino acid residues and water molecules connect the two active sites. This connectivity is responsible for the cross-talk between the active sites.     

The role of amino acid residues in the active site of L-methionine γ-lyase from Pseudomonas putida

Cys116, Lys240*, and Asp241* (asterisks indicate residues from the second subunit of the active dimer) at the active site of L-methionine γ-lyase of Pseudomonas putida (MGL_Pp) are highly conserved among heterologous MGLs. In a previous study, we found that substitution of Cys116 for His led to a drastic increase in activity toward L-cysteine and a decrease in that toward L-methionine. In this study, we examined some properties of the C116H mutant by kinetic analysis and 3D structural analysis. We assumed that substitution of Cys116 for His broke the original hydrogen-bond network and that this induced a significant effect of Tyr114 as a general acid catalyst, possibly due to the narrow space in the active site. The C116H mutant acquired a novel β-elimination activity and lead a drastic conformation change in the histidine residue at position 116 by binding the substrate, suggesting that this His residue affects the reaction specificity of C116H. Furthermore, we suggest that Lys240* is important for substrate recognition and structural stability and that Asp241* is also involved in substrate specificity in the elimination reaction. Based on this, we suggest that the hydrogen-bond network among Cys116, Lys240*, and Asp241* contributes to substrate specificity that is, to L-methionine recognition at the active site in MGL_Pp.     

Crystal structure of phospholipase A2 complex with the hydrolysis products of platelet activating factor: equilibrium binding of fatty acid and lysophospholipid-ether at the active site may be mutually exclusive

We have solved the 1.55 A crystal structure of the anion-assisted dimer of porcine pancreatic group IB phospholipase A2 (PLA2), complexed with the products of hydrolysis of the substrate platelet activating factor. The dimer contains five coplanar phosphate anions bound at the contact surface between the two PLA2 subunits. This structure parallels a previously reported anion-assisted dimer that mimics the tetrahedral intermediate of PLA2 bound to a substrate interface [Pan, Y. H., et al. (2001) Biochemistry 40, 609-617]. The dimer structure has a molecule of the product acetate bound in subunit A and the other product 1-octadecyl-sn-glycero-3-phosphocholine (LPC-ether) to subunit B. Therefore, this structure is of the two individual product binary complexes and not of a ternary complex with both products in one active site of PLA2. Protein crystals with bound products were only obtained by cocrystallization starting from the initial substrate. In contrast, an alternate crystal form was obtained when PLA2 was cocrystallized with LPC-ether and succinate, and this crystal form did not contain bound products. The product bound structure has acetate positioned in the catalytic site of subunit A such that one of its oxygen atoms is located 3.5 A from the catalytic calcium. Likewise, a longer than typical Ca-to-Gly(32) carbonyl distance of 3.4 A results in a final Ca coordination that is four-coordinate and has distorted geometry. The other oxygen of acetate makes hydrogen bonds with N(delta)(1)-His(48), O(delta)(1)-Asp(49), and the catalytic assisting water (w7). In contrast, the glycerophosphocholine headgroup of LPC-ether in subunit B makes no contacts with calcium or with the catalytic residues His(48) or Asp(49). The tail of the LPC-ether is located near the active site pocket with the last nine carbons of the sn-1- acyl chain refined in two alternate conformations. The remaining atoms of the LPC-ether product have been modeled into the solvent channel but have their occupancies set to zero in the refined model due to disorder. Together, the crystallographic and equilibrium binding results with the two products show that the simultaneous binding of both the products in a single active site is not favored.     

Structural insight into poly(A) binding and catalytic mechanism of human PARN

Poly(A)-specific ribonuclease (PARN) is a processive, poly(A)-specific 3' exoribonuclease. The crystal structure of C-terminal truncated human PARN determined in two states (free and RNA-bound forms) reveals that PARNn is folded into two domains, an R3H domain and a nuclease domain similar to those of Pop2p and epsilon186. The high similarity of the active site structures of PARNn and epsilon186 suggests that they may have a similar catalytic mechanism. PARNn forms a tight homodimer, with the R3H domain of one subunit partially enclosing the active site of the other subunit and poly(A) bound in a deep cavity of its nuclease domain in a sequence-nonspecific manner. The R3H domain and, possibly, the cap-binding domain are involved in poly(A) binding but these domains alone do not appear to contribute to poly(A) specificity. Mutations disrupting dimerization abolish both the enzymatic and RNA-binding activities, suggesting that the PARN dimer is a structural and functional unit. The cap-binding domain may act in concert with the R3H domain to amplify the processivity of PARN.     

Structures of D-xylose isomerase from Arthrobacter strain B3728 containing the inhibitors xylitol and D-sorbitol at 2.5 A and 2.3 A resolution, respectively

The structures of D-xylose isomerase from Arthrobacter strain B3728 containing the polyol inhibitors xylitol and D-sorbitol have been solved at 2.5 A and 2.3 A, respectively. The structures have been refined using restrained least-squares refinement methods. The final crystallographic R-factors for the D-sorbitol (xylitol) bound molecules, for 43,615 (32,989) reflections are 15.6 (14.7). The molecule is a tetramer and the asymmetric unit of the crystal contains a dimer, the final model of which, incorporates a total of 6086 unique protein, inhibitor and magnesium atoms together with 535 bound solvent molecules. Each subunit of the enzyme contains two domains: the main domain is a parallel-stranded alpha-beta barrel, which has been reported in 14 other enzymes. The C-terminal domain is a loop structure consisting of five helical segments and is involved in intermolecular contacts between subunits that make up the tetramer. The structures have been analysed with respect to molecular symmetry, intersubunit contacts, inhibitor binding and active site geometry. The refined model shows the two independent subunits to be similar apart from local deviations due to solvent contacts in the solvent-exposed helices. The enzyme is dependent on a divalent cation for catalytic activity. Two metal ions are required per monomer, and the high-affinity magnesium(II) site has been identified from the structural results presented here. The metal ion is complexed, at the high-affinity site, by four carboxylate side-chains of the conserved residues, Glu180, Glu216, Asp244 and Asp292. The inhibitor polyols are bound in the active site in an extended open chain conformation and complete an octahedral co-ordination shell for the magnesium cation via their oxygen atoms O-2 and O-4. The active site lies in a deep pocket near the C-terminal ends of the beta-strands of the barrel domain and includes residues from a second subunit. The tetrameric molecule can be considered to be a dimer of "active" dimers, the active sites being composed of residues from both subunits. The analysis has revealed the presence of several internal salt-bridges stabilizing the tertiary and quaternary structure. One of these, between Asp23 and Arg139, appears to play a key role in stabilizing the active dimer and is conserved in the known sequences of this enzyme.(ABSTRACT TRUNCATED AT 400 WORDS)     

Importance of the conserved residues in the peptidoglycan glycosyltransferase module of the class A penicillin-binding protein 1b of Escherichia coli

The peptidoglycan glycosyltransferase (GT) module of class A penicillin-binding proteins (PBPs) and monofunctional GTs catalyze glycan chain elongation of the bacterial cell wall. These enzymes belong to the GT51 family, are characterized by five conserved motifs, and have some fold similarity with the phage lambda lysozyme. In this work, we have systematically modified all the conserved amino acid residues of the GT module of Escherichia coli class A PBP1b by site-directed mutagenesis and determined their importance for the in vivo and in vitro activity and the thermostability of the protein. To get an insight into the GT active site of this paradigm enzyme, a model of PBP1b GT domain was constructed based on the available crystal structures (PDB codes 2OLV and 2OLU). The data show that in addition to the essential glutamate residues Glu233 of motif 1 and Glu290 of motif 3, the residues Phe237 and His240 of motif 1 and Gly264, Thr267, Gln271, and Lys274 of motif 2, all located in the catalytic cavity of the GT domain, are essential for the in vitro enzymatic activity of the PBP1b and for its in vivo functioning. Thus, the first three conserved motifs contain most of the residues that are required for the GT activity of the PBP1b. The residues Asp234, Phe237, His240, Thr267, and Gln271 are proposed to maintain the structure of the active site and the positioning of the catalytic Glu233.     

New reactions in the crotonase superfamily: structure of methylmalonyl CoA decarboxylase from Escherichia coli

The molecular structure of methylmalonyl CoA decarboxylase (MMCD), a newly defined member of the crotonase superfamily encoded by the Escherichia coli genome, has been solved by X-ray crystallographic analyses to a resolution of 1.85 A for the unliganded form and to a resolution of 2.7 A for a complex with an inert thioether analogue of methylmalonyl CoA. Like two other structurally characterized members of the crotonase superfamily (crotonase and dienoyl CoA isomerase), MMCD is a hexamer (dimer of trimers) with each polypeptide chain composed of two structural motifs. The larger N-terminal domain contains the active site while the smaller C-terminal motif is alpha-helical and involved primarily in trimerization. Unlike the other members of the crotonase superfamily, however, the C-terminal motif is folded back onto the N-terminal domain such that each active site is wholly contained within a single subunit. The carboxylate group of the thioether analogue of methylmalonyl CoA is hydrogen bonded to the peptidic NH group of Gly 110 and the imidazole ring of His 66. From modeling studies, it appears that Tyr 140 is positioned within the active site to participate in the decarboxylation reaction by orienting the carboxylate group of methylmalonyl CoA so that it is orthogonal to the plane of the thioester carbonyl group. Surprisingly, while the active site of MMCD contains Glu 113, which is homologous to the general acid/base Glu 144 in the active site of crotonase, its carboxylate side chain is hydrogen bonded to Arg 86, suggesting that it is not directly involved in catalysis. The new constellation of putative functional groups observed in the active site of MMCD underscores the diversity of function in this superfamily.