Combination of PB2 271A and SR polymorphism at positions 590/591 is critical for viral replication and virulence of swine influenza virus in cultured cells and in vivo

Triple reassortant swine influenza viruses (SIVs) and 2009 pandemic H1N1 (pH1N1) virus contain an avian-origin PB2 with 271A, 590S, 591R, and 627E. To evaluate the role of PB2 271A, 590S, and 591R in the replication and virulence of SIV, single (1930-TX98-PB2-271T)-, double (1930-TX98-PB2-590A591A)-, and triple (1930-TX98-PB2-271T590A591A)-mutated viruses were generated in the background of the H1N1 A/swine/Iowa/15/30 (1930) virus with an avian-origin PB2 from the triple-reassortant A/swine/Texas/4199-2/98 (TX98) virus, called the parental 1930-TX98-PB2. Compared to parental virus and single- and double-mutated viruses, the triple-mutated virus replicated less efficiently in cell cultures and was attenuated in mice. These results suggest that a combination of 271A with the 590/591 SR polymorphism is critical for pH1N1 and triple-reassortant SIVs for efficient replication and adaptation in mammals.     

从反胶束溶液中反萃牛血清白蛋白的研究

由近红外光谱证实,十六烷基三甲基溴化铵(CTAB)/正己醇-正辛烷反胶束溶液是牛血清白蛋白(BSA)增溶于非极性有机溶剂的较理想中介。研究了反萃液酸度、离子强度和种类等参数对BSA反萃率的影响,过低的溶液酸度导致BSA变性。适宜的反萃液为:1.0～2.0mol/L KBr,pH4.3～4.9。蛋白质的紫外光谱表明,BSA分子在料液,反胶束溶液和反萃液中的构象大致相同。此外,探讨了反胶束溶液循环使用的效率问题。最后,通过采用适当的相比,成功地实现了蛋白质的回收和浓缩。     

Extraction of bovine serum albumin using nanoparticulate reverse micelles

The extraction of a relatively large molecular weight protein, bovine serum albumin (BSA), using nano-sized reverse micelles of nonionic surfactant polyoxyethylene p-t-octylphenol (Triton-X-100) is attempted for the first time. Suitability of reverse micelles of anionic surfactant sodium bis (2-ethyl hexyl) sulfosuccinate (AOT) and Triton-X-100/AOT mixture in organic solvent toluene for BSA extraction is also investigated. Although, the size of the Triton-X-100 reverse micelle in toluene is large enough to host BSA molecule in the hydraulic core, the overall extraction efficiency is found to be low, which may be due to lack of strong driving force. AOT/toluene system resulted in complete forward extraction at aqueous pH 5.5 and a surfactant concentration of 160 mM. The back extraction with aqueous phase (pH 5.5) resulted in 100% extraction of BSA from the organic phase. The addition of Triton-X-100 to AOT reduced the extraction efficiency of AOT reverse micelles, which may be attributed to reduced hydrophobic interaction. The circular dichroism (CD) spectrum of BSA extracted using AOT/toluene reverse micelles indicated the structural stability of the protein extracted.     

Adsorption of BSA on strongly basic chitosan: Equilibria

Equilibrium isotherms for adsorption of bovine serum albumin (BSA) on a new adsorbent, a strongly basic crosslinked chitosan (Chitopearl 2503), which is hard and is not compressed by pressure in a column, have been presented and compared with diethylaminoethyl (DEAE) Sepharose Fast Flow (hard gel). In Chitopearl 2503, when only buffer existed in the BSA solution, the isotherm was not affected by the initial concentration of BSA but it was affected by pH considerably. The isotherm was favorable when pH >/= pl ( congruent with 4.8). When NaCl existed in the BSA solution, the amount of BSA absorbed on the resin decreased with increasing concentration of NaCl. When the concentration of NaCl was 200 mol/m(3), the resin did not adsorb BSA at all. The equilibrium data were correlated by the Langmuir equation reasonably well. The BSA may be adsorbed mainly by electrostatic attraction between negatively charged BSA and positively charged quanternary ammonium groups at pH > pl and by protonation reaction of the primary ammonium groups by weak acid groups of BSA at pH = pl. These are confirmed by measuring the amount of inorganic ion exchanged for BSA. In DEAE Sepharose Fast Flow, the isotherm was favorable when pH > pl but unfavorable ar pH = pl. The saturation capacity of BSA on Chitopearl 2503 is about 1.3 to 2.2 times larger than that on DEAE Sepharose Fast Flow. (c) 1994 John Wiley & Sons, Inc.     

Nature and position of functional group on thiopurine substrates influence activity of xanthine oxidase — Enzymatic reaction pathways of 6-mercaptopurine and 2-mercaptopurine are different

Xanthine oxidase-catalyzed hydroxylation reactions of the anticancer drug 6-mercaptopurine (6-MP) and its analog 2-mercaptopurine (2-MP) as well as 6-thioxanthine (6-TX) and 2-thioxanthine (2-TX) have been studied using UV-spectroscopy, high pressure liquid chromatography, photodiode array, and liquid chromatography-based mass spectral analysis. It is shown that 6-MP and 2-MP are oxidatively hydroxylated through different pathways. Enzymatic hydroxylation of 6-MP forms 6-thiouric acid in two steps involving 6-TX as the intermediate, whereas 2-MP is converted to 8-hydroxy-2-mercaptopurine as the expected end product in one step. Surprisingly, in contrast to the other thiopurines, enzymatic hydroxylation of 2-MP showed a unique hyperchromic effect at 264 nm as the reaction proceeded. However, when 2-TX is used as the substrate, it is hydroxylated to 2-thiouric acid. The enzymatic hydroxylation of 2-MP is considerably faster than that of 6-MP, while 6-TX and 2-TX show similar rates under identical reaction conditions. The reason why 2-MP is a better substrate than 6-MP and how the chemical nature and position of the functional groups present on the thiopurine substrates influence xanthine oxidase activity are discussed.     

Differential scanning calorimetric studies on bovine serum albumin: III. Effect of sodium dodecyl sulphate

Measurements of differential scanning calorimetry (d.s.c.) have been made on the complex bovine serum albumin (BSA)--sodium dodecyl sulphate (SDS) under various conditions. There are two peaks P1 and P2 in the d.s.c. curve for BSA at pH 7 and in the absence of NaCl, indicating the presence of the heat-induced transition of BSA. There are three peaks P1, P2 and P3 in the curve for the system with the molar mixing ratio SDS/BSA = 1. With the increase in the amount of SDS, the peak P3 grows at the expense of P1 and P2. There is only a single peak P3 in the curve for the systems SDS/BSA > 7, and no peak at SDS/BSA = 50 and 100. There is a single peak P12 in the curve for BSA at pH 7 and in the presence of 0.05 M NaCl, indicating that the heat-induced transition is suppressed. There are two peaks P12 and P3 for the systems SDS/BSA = 1-5; the area ratio of the peak P3 to P12 increases with the increase in the amount of SDS. There is only a single peak P3 when SDS/BSA > 7, and no peak at SDS/BSA = 50. It is concluded that the peak P3 is a product of SDS regardless of the presence or absence of NaCl. Values of thermal denaturation temperature (Td) and enthalpy (delta H) of thermal denaturation indicate that the complex AD12 (A = BSA, D = SDS) is in the most thermostabilized state.(ABSTRACT TRUNCATED AT 250 WORDS)     

Affinity extraction of BSA with reversed micellar system composed of unbound Cibacron Blue

Affinity Cibacron Blue 3GA (CB) dye in aqueous phase was directly transferred to the reversed micelles due to electrostatic interaction between anionic CB and cationic cetyltrimethylammonium bromide (CTAB). The bovine serum albumin (BSA) transfer to the reverse micelles increases significantly in a wide range of pH by the addition of a small amount of CB ( approximately 1.0-7.0% of the total surfactant concentration) to the aqueous phase. For pH < pI, the selectivity can be significantly improved with the presence of affinity CB because no BSA was extracted in the absence of CB. For backward extraction of BSA from the micellar phase with stripping aqueous solution, the addition of 2-propanol to the aqueous phase can recover almost all BSA (98.5%) extracted into the reverse micelles.     

Adsorption of BSA on QAE-dextran: equilibria

Equilibrium isotherms for adsorption of bovine serum albumin (BSA) on a strong-base (QAE) dextran-type ion exchanger have been determined experimentally. They were not affected by the initial concentration of BSA but were affected by pH considerably. They were correlated by the Langmuir equation when pH >/= 5.05 and by the Freundlich equation of pH 4.8, which is close to pl approximately 4.8 of BSA. The contribution of ion exchange to adsorption of BSA on the ion exchanger was determined experimentally. The maximum amounts of inorganic anion exchanged for BSA were 1% and 0.4% of the exchange capacity of the ion exchanger at pH 6.9, respectively. Since the effect of the ion exchange on the adsorption appeared small, BSA may be adsorbed mainly by electrostatic attraction when pH >/= 5.05 and by hydrophobic interaction or hydrogen bonding at pH 4.8. When NaCl coexisted in the solution, the shape of the isotherm was similar to the Langmuir isotherm, but it is shifted to the right. When the concentration of NaCl was 0.2 mol/dm(3), BsA was not adsorbed on the resin. When BSA was dissolved in pure water, the saturation capacity of BSA on HPO(4) (2-),-orm resin was about 2 times larger than that for adsorption from the solution with buffer (pH 6.9 and 8.79). The saturation capacity for adsorption of BSA in pure water on HPO(4) (2-) + H(2)O(4) (-)-from resin was much smaller than that from the solution with buffer. The isotherms for univalent Cl(-)-and H(2)PO(4) (-)-form resin was peculiar; that is, the amount of BSA adsorbed decreased with increasing the liquid-phase equilibrium concentration of BSA. (c) 1993 John Wiley & Sons, Inc.     

The binding of a thyroid hormone metabolite, 3-monoiodo-L-thyronine, to bovine serum albumin as measured by circular dichroism

The interaction between a thyroid hormone metabolite, 3-monoiodo-L-thyronine (3-T1) and bovine serum albumin (BSA) was investigated by using the CD method. An enhanced CD band was observed at the absorption wavelength region of 3-T1 around 293 nm suggesting the binding of 3-T1 to the BSA molecule. The ellipticity at 293 nm was measured at various molar ratios of 3-T1 to BSA, and the apparent binding constant and the maximum number of binding sites could be estimated as Kapp = 8.85 +/- 1.07 X 10(4) M-1 and n = 23.8 +/- 0.9 respectively. The CD of a mixture of BSA, 3-T1 and thyroxine (T4) was also studied at various pH's. The pH profile of the two characteristic CD bands at 293 nm and 320 nm, attributed to bound 3-T1 and T4, suggested that the optimum binding condition of 3-T1 was attained at alkaline pH of around 9, while that of T4 was attained over a wide pH range between 5-10. A significant role of the ionized 4'-hydroxyl group of 3-T1 in the binding reaction with BSA is also suggested.     

Water-soluble complexes through coulombic interactions between bovine serum albumin and anionic polyelectrolytes grafted with hydrophilic nonionic side chains

The interaction between bovine serum albumin (BSA) and the anionic graft copolymers poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulfonate)-graft-poly(N,N-dimethylacrylamide) (P(NaA-co-NaAMPS)-g-PDMAMx) was investigated within the acid pH region, 2 < or = pH < or = 7. The weight percentage, x, of the poly(N,N-dimethylacrylamide) (PDMAM) side chains varied from 0 up to 75% (w:w). When BSA and P(NaA-co-NaAMPS)-g-PDMAMx are oppositely charged, i.e., when pH is lower than the isoelectric point of BSA, the two macromolecules associate through Coulombic attractions. When the anionic graft copolymer is rich enough to the nonionic PDMAM side chains, x > or = 50% w:w, the associative phase separation is practically prevented, as revealed by the turbidimetric study of the BSA/P(NaA-co-NaAMPS)-g-PDMAMx mixtures in aqueous solution vs pH. In addition, the viscosity measurements support the formation through a charge neutralization process of a rather compact protein-polyelectrolyte complex stabilized by the hydrophilic PDMAM side chains grafted onto the anionic copolymer backbone.     

Testing oligothiophene fluorophores under physiological conditions. Preparation and optical characterization of the conjugates of bovine serum albumin with oligothiophene N-hydroxysuccinimidyl esters

Bovine serum albumin (BSA) was reacted with linear and newly synthesized branched oligothiophene N-hydroxysuccinimidyl ester fluorophores (TSEs) in moderately basic carbonate buffer solution. Optically stable BSA-TSE conjugates were obtained with a degree of labeling depending on experimental conditions. Conjugates with high fluorophore to BSA ratios (F/BSA = 8) displayed fluorescence quantum yields in the range of 10-30% in water at pH = 7.2, comparable to the quantum yield (25%) of the BSA-FITC conjugate prepared under the same conditions and with the same degree of labeling.     

无机高分子絮凝剂PSAS的制备及其在赤潮防治中的应用

采用3因子3水平的正交试验设计,考察了SiO2浓度,Al^3 /SiO2摩尔比及pH对PSAS（聚硅酸硫酸铝）制备的影响,研究了PSAS对不同赤潮生物的絮凝作用,并与传统无机絮凝剂AS（硫酸）的絮凝效果进行了比较。结果表明,PSAS絮凝不同种类赤潮生物的最佳制备条件不同。根据实验操作的可行性,得出PSAS的适宜制备条件为：SiO2的浓度2％,Al^3 /SiO2摩尔比1,pH4,絮凝实验表明,PSAS的絮凝效果明显优于AS,在达到相同去除率的情况下,PSAS的用量比AS低约30％－40％,PSAS对不同种类赤潮生物的絮凝效率也不同,与细胞的生理生态特性差异有关。     

Interactions of urocanic acid with bovine serum albumin and the influence of pH on binding affinities: a docking simulation study

In the present study, the interactions of urocanic acid (UA) with bovine serum albumins (BSA) at pH 5.0 and 7.4 were investigated by means of docking simulations. The binding modes of trans- and cis-UA to BSA at pH 5.0 and 7.4 were analysed. In addition, the theoretically predicted binding abilities of zwitterion and anion of UA with BSA are in good agreement with the experimental results. Through comparison with the binding patterns, we revealed that the stronger interactions of UA anion with BSA relative to the zwitterion primarily result from: (1) the increased number of hydrogen bonds between UA anion and BSA; (2) the attractive electrostatic interaction between the deprotoned carboxyl group in UA anion and Arg433 in comparison with the repulsion between the imidazole moiety in zwitterion and the same residue in BSA. This provides a rational explanation for the experimental finding that the binding of UA to BSA at pH 7.4 is much stronger than at pH 5.0.     

Characterization of the soluble nanoparticles formed through Coulombic interaction of bovine serum albumin with anionic graft copolymers at low pH

A static light scattering (SLS) study of bovine serum albumin (BSA) mixtures with two anionic graft copolymers of poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly(N,N-dimethylacrylamide), with a high composition in poly(N,N-dimethylacrylamide) (PDMAM) side chains, revealed the formation of oppositely charged complexes, at pH lower than 4.9, the isoelectric point of BSA. The core-corona nanoparticles formed at pH = 3.00 were characterized. Their molecular weight and radius of gyration were determined by SLS, while their hydrodynamic radius was determined by dynamic light scattering. Small angle neutron scattering measurements were used to determine the radius of the insoluble complexes, comprising the core of the particles. The values obtained indicated that their size and aggregation number of the nanoparticles were smaller when the content of the graft copolymers in neutral PDMAM side chains was higher. Such particles should be interesting drug delivery candidates, if the gastrointestinal tract was to be used.     

Composite surface for blocking bacterial adsorption on protein biochips

The design and fabrication of protein biochips requires characterization of blocking agents that minimize nonspecific binding of proteins or organisms. Nonspecific adsorption of Escherichia coli, Listeria innocua, and Listeria monocytogenes is prevented by bovine serum albumin (BSA) or biotinylated BSA adsorbed on SiO(2) surfaces of a biochip that had been modified with a C(18) coating. Biotinylated BSA forms a protein-based surface that in turn binds streptavidin. Because streptavidin has multiple binding sites for biotin, it in turn anchors other biotinylated proteins, including antibodies. Hence, biotinylated BSA simultaneously serves as a blocking agent and a foundation for binding an interfacing protein, avidin or streptavidin, which in turns anchors biotinylated antibody. In our case, the antibody is C11E9, an IgG-type antibody that binds Listeria spp. Nonspecific adsorption of another bacterium, Escherichia coli, is also minimized due to the blocking action of the BSA. The blocking characteristics of BSA adsorbed on C(18)-derivatized SiO(2) surfaces for construction of a protein biochip for electronic detection of pathogenic organisms is investigated.     

The Importance of Protein-Protein Interactions on the pH-Induced Conformational Changes of Bovine Serum Albumin: A Small-Angle X-Ray Scattering Study

The combined effects of concentration and pH on the conformational states of bovine serum albumin (BSA) are investigated by small-angle x-ray scattering. Serum albumins, at physiological conditions, are found at concentrations of ∼35-45 mg/mL (42 mg/mL in the case of humans). In this work, BSA at three different concentrations (10, 25, and 50 mg/mL) and pH values (2.0-9.0) have been studied. Data were analyzed by means of the Global Fitting procedure, with the protein form factor calculated from human serum albumin (HSA) crystallographic structure and the interference function described, considering repulsive and attractive interaction potentials within a random phase approximation. Small-angle x-ray scattering data show that BSA maintains its native state from pH 4.0 up to 9.0 at all investigated concentrations. A pH-dependence of the absolute net protein charge is shown and the charge number per BSA is quantified to 10(2), 8(1), 13(2), 20(2), and 26(2) for pH values 4.0, 5.4, 7.0, 8.0, and 9.0, respectively. The attractive potential diminishes as BSA concentration increases. The coexistence of monomers and dimers is observed at 50 mg/mL and pH 5.4, near the BSA isoelectric point. Samples at pH 2.0 show a different behavior, because BSA overall shape changes as a function of concentration. At 10 mg/mL, BSA is partially unfolded and a strong repulsive protein-protein interaction occurs due to the high amount of exposed charge. At 25 and 50 mg/mL, BSA undergoes some re-folding, which likely results in a molten-globule state. This work concludes by confirming that the protein concentration plays an important role on the pH-unfolded BSA state, due to a delicate compromise between interaction forces and crowding effects.     

Novel thymine-functionalized polystyrenes for applications in biotechnology. 2. Adsorption of model proteins

This paper investigates the adsorption of bovine serum albumin (BSA) and bovine hemoglobin (BHb) model proteins onto novel thymine-functionalized polystyrene (PS-VBT) microspheres, in comparison with polystyrene (PS) microspheres. Maximum adsorption was obtained for both proteins near their corresponding isoelectric points (pI at pH = 4.7 for BSA and 7.1 for BHb). FTIR and adsorption isotherm analysis demonstrated that, although both proteins were physisorbed onto PS through nonspecific hydrophobic interactions, adsorption onto the functionalized copolymers occurred by both physisorption and chemisorption via hydrogen bonding. FTIR analysis also indicated conformational changes in the secondary structure of BSA and BHb adsorbed onto PS, whereas little or no conformation change was seen in the case of adsorption onto PS-VBT. Atomic force microscopy (AFM), consistent with the isotherm results, also demonstrated monolayer adsorption for both proteins. AFM images of BSA adsorbed onto copolymers with 20 mol % surface VBT loading showed exclusively end-on orientation. Adsorption onto copolymers with lower functionality showed mixed end-on and side-on orientation modes of BSA, and only the side-on orientation was observed on PS. The AFM results agreed well with theoretically calculated and experimentally obtained adsorption capacities. AFM together with calculated and observed adsorption capacity data for BHb indicated that this protein might be highly compressed on the copolymer surface. Adsorption from a binary mixture of BSA and BHb onto PS-VBT showed good separation at pH=7.0; approximately 90% of the adsorbed protein was BHb. The novel copolymers have potential applications in biotechnology.     

Dermatan sulfate as a stabilizer for protein stability in poly(lactide-co-glycolide) depot

Dermatan sulfate (DS), a glycosaminoglycan family, was investigated as a additive to enhance the stability of therapeutic protein with low p/ value loaded in poly(lactide-co-glycolide) (PLGA) microspheres prepared by water-in-oil-in-water (W₁/O/W₂) method. DS maintains negative charge below pH 3.0 because of its sulfate groups, while most anionic polymer with carboxyl groups becomes neutral charge at that pH. Thus, at pH 3.0 DS can form a polyelectrolyte complex with a protein with lower p/ such as exendin-4, insulin, and human growth hormone. In order to complex with DS, bovine serum albumin (BSA) was employed as a model protein, which has low p/value (p/= 4.8). The complex prepared at pH 3.0 showed a nano-size in the range of 100∼200 nm with a mono distribution. During the preparation of PLGA depot, DS concentration in water phase increases with decreasing the formation of non-covalent BSA aggregates and enhancing BSA loading efficiency. It means that DS/BSA complex system enabled to keep a stability of BSA at the water/organic interface. In an in vitro BSA release test, PLGA depot with DS exhibited a lower initial burst kinetic than only PLGA depot and continuous BSA release in almost 100% for 23 days. From the results, it was concluded that DS as an additive in PLGA depot, has a potential for the long-term delivery of therapeutic proteins with lower p/ value.     

Investigations on the Interaction between Cuprous Oxide Nanocubes and Bovine Serum Albumin with Comprehensive Spectroscopic Methods

The interaction between cuprous oxide (Cu(2)O) nanocubes and bovine serum albumin (BSA) was investigated from a spectroscopic angle under simulative physiological conditions. Under pH 7.4, Cu(2)O could effectively quench the intrinsic fluorescence of BSA via static quenching. The apparent binding constant (K(A)) was 3.23, 1.91, and 1.20?×?10(4) M(-1) at 298, 304, and 310 K, respectively, and the number of binding sites was 1.05. According to the Van't Hoff equation, the thermodynamic parameters (ΔH° = -63.39 kJ mol(-1), ΔS° = -126.45 J?mol(-1) K(-1)) indicated that hydrogen bonds and van der Waals forces played a major role in stabilizing the BSA-Cu(2)O complex. Besides, the average binding distance (r(0)?= 2.76 nm) and the critical energy transfer distance (R(0) = 2.35 nm) between Cu(2)O and BSA were also evaluated according to F?rster's non-radioactive energy transfer theory. Furthermore, UV-visible and circular dichroism results showed that the addition of Cu(2)O changed the secondary structure of BSA and led to a decrease in α-helix. All results showed that BSA underwent substantial conformational changes induced by Cu(2)O, which can be very helpful in the study of nanomaterials in the application of biomaterials.     

19F-NMR spin-spin relaxation (T2) method for characterizing volatile anesthetic binding to proteins. Analysis of isoflurane binding to serum albumin.

This paper characterizes the low-affinity ligand binding interactions of a fluorinated volatile anesthetic, isoflurane (CHF2OCHClCF3), with bovine serum albumin (BSA) using 19F-NMR transverse relaxation (T2). 19F-NMR spectra of isoflurane in aqueous BSA reveal a single isoflurane trifluoromethyl resonance, indicative of rapid exchange of isoflurane between protein-bound and aqueous (free) environments. The exchange is slow enough, however, that the chemical shift difference between bound and free isoflurane (delta omega = 0.545 ppm) contributes to the observed isoflurane T2. The contribution of delta omega to T2 can be minimized by shortening the interval between 180 degrees refocusing pulses in the Carr-Purcell-Meiboom-Gill pulse sequence used to monitor T2. Analysis of the dependence of T2 on interpulse interval additionally allows determination of the T2 (6.2 ms) and the average lifetime (tau b = 187 microseconds) of bound isoflurane molecules. By use of a short interpulse interval (less than 100 microseconds), T2 measurements can readily be used to analyze equilibrium binding of isoflurane to BSA. This analysis revealed a discrete saturable binding component with a KD = 1.4 mM that was eliminated either by coincubation with oleic acid (6 mol/mol of BSA) or by conversion of BSA to its "expanded" form by titration to pH 2.5. The binding was independently characterized using a gas chromatographic partition analysis (KD = 1.4 mM, Bmax = 3-4 sites). In summary, this paper describes a method whereby T2 measurements can be used to characterize equilibrium binding of low-affinity ligands to proteins without the confounding contributions of chemical shift.(ABSTRACT TRUNCATED AT 250 WORDS)