The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

Heats of reaction of HMo(CO)3(C5R5) (R = H, CH3) with diphenyldisulfide and of formation of the clusters [PhSMo(CO)x(C5H5)]2, X = 1,2. Thermodynamic study of molybdenum-sulfur bond strengths

The enthalpies of reaction of HMo(CO)₃C₅R₅ (R = H, CH₃) with diphenyldisulfide producing PhSMo(CO)₃C₅R₅ and PhSH have been measured in toluene and THF solution (R = H, ΔH= −8.5 ± 0.5 kcal mol⁻¹ (tol), −10.8 ± 0.7 kcal mol⁻¹ (THF); R = CH₃, ΔH = −11.3±0.3 kcal mol⁻¹ (tol), −13.2±0.7 kcal mol⁻¹ (THF)). These data are used to estimate the Mo---SPh bond strength to be on the order of 38–41 kcal mol⁻¹ for these complexes. The increased exothermicity of oxidative addition of disulfide in THF versus toluene is attributed to hydrogen bonding between thiophenol produced in the reaction and THF. This was confirmed by measurement of the heat of solution of thiophenol in toluene and THF. Differential scanning calorimetry as well as high temperature calorimetry have been performed on the dimerization and subsequent decarbonylation reactions of PhSMo(CO)₃Cp yielding [PhSMo(CO)₂Cp]₂ and [PhSMo(CO)Cp]₂. The enthalpies of reaction of PhSMo(CO)₃Cp and [PhSMo(CO)₂Cp]₂ with PPh₃, PPh₂Me and P(OMe)₃ have also been measured. The disproportionation reaction: 2[PhSMo(CO)₂Cp]₂ → 2PhSMo(CO)₃Cp + [PhSMP(CO)Cp]₂ is reported and its enthalpy has also been measured. These data allow determination of the enthalpy of formation of the metal-sulfur clusters [PhSMo(CO)_nC₅H₅]₂, N = 1,2.     

A series of heteroleptic complexes of the type fac-[MnL2] [H2L=derivatives of N-(2-hydroxybenzyl)glycine or N-(5-nitro-2-hydroxybenzyl)sarcosine] possessing unusual Mn(III) co-ordination spheres

The mononuclear manganese(III) complexes [C₅H₁₀NH₂][MnL₂] [L²⁻=a substituted N-(2-hydroxybenzyl)glycinate (hbg²⁻) viz. 3,5-dibromo- (3,5-Br-hbg²⁻), 3,5-dichloro- (3,5-Cl-hbg²⁻), 3-methyl-5-chloro- (3,5-Me,Cl-hbg²⁻), 5-bromo- (5-Br-hbg²⁻), 5-chloro- (5-Cl-hbg²⁻), 5-nitro- (5-NO₂-hbg²⁻) or N-(5-nitro-2-hydroxybenzyl)sarcosine (5-NO₂-hbs²⁻)] have been synthesised by reaction of the appropriate ligand with manganese(II) perchlorate under ambient conditions in a 2:1 molar ratio using piperidine as base. The structures of three of these complexes, [C₅H₁₀NH₂][Mn(3,5-Cl-hbg)₂] (2), [C₅H₁₀NH₂][Mn(5-NO₂-hbg)₂] (6) and [C₅H₁₀NH₂][Mn(5-NO₂-hbs)₂] (7) have been elucidated by single-crystal X-ray crystallography and each displays two similar, independent [MnL₂]⁻ ions in the asymmetric unit linked via piperidinium cations through hydrogen bonding. The ligands co-ordinate in a facial tridentate fashion with the three donor atoms being the phenolate and carboxylate oxygens and the amine nitrogen. The geometry at the Mn centres is compressed rhombic octahedral consistent with a pseudo-Jahn–Teller compression along the Mn–O(phenolate) axis. Mean bond lengths are in the ranges 1.886–1.889 Å for the Mn–O(phenolate), 2.062–2.125 Å for the Mn–O(carboxylate) and 2.091–2.184 Å for the Mn–N(amine) distances. The magnetic susceptibility and electronic and IR spectroscopic data are discussed with reference to the crystal structures.     

The synthesis and properties of binuclear pentacyanoiron(III)-μ-cyano- amminetetracyanoiron(III) [(C6H5)4P]4[(NC)5Fe---NC---Fe(CN)4NH3]·6H2O

The binuclear cyanoferrate, tetraphenylphosphonium pentacyanoiron(III)-μ-cyano-amminetetracyanoiron(III), [(C₆H₅)₄P]₄[Fe₂(CN)₁₀NH₃]⁴⁻, was synthesized by air oxidation of aqueous solutions of Na₃[Fe(CN)₅NH₃] · 3H₂O. Single crystal X-ray diffraction studies show the compound to contain the binuclear, cyano-bridged anion, [(NC)₅Fe---NC---Fe(CN)₄NH₃]⁴⁻. This compound is structurally identical to the one prepared by A. Ludi et al., [Inorg. Chim. Acta, 34, 113 (1979)], with the exception that [Fe(CN)₆]³⁻ is not required for the synthesis of this compound. The Fe(III) atoms are antiferromagnetically coupled through the CN⁻ bridge, as shown by a maximum in the magnetic susceptibility at 50 K. The electronic and IR spectra of the complex in the solid state and in solution are discussed.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Comparison in halide binding ability between the unsaturated clusters [Pd3(μ-dppm)3(CO)] and [PdPtCo(μ-dppm)2(CO)3(CNBu)] (dppm = Ph2PCH2PPh2)

The trinuclear clusters [Pd₃(μ-dppm)₃(CO)]²⁺ and [PtPdCo(μ-dppm)₂(CO)₃(CN^tBu)]⁺ exhibit a large and a small cavity, respectively, formed by the phenyl rings of the bridging diphosphine ligands. Their binding constants (K₁₁) with halide ions (X⁻) were obtained by UV-Vis spectroscopy. The binding ability varies as I⁻ > Br⁻ > Cl⁻, and [Pd₃(μ-dppm)₃(CO)]²⁺ > [ptPdCo(μ-dppm)₂-(CO)₃(CN^tBu)]⁺. The MO diagram for the related cluster [Pd₂Co(μ-dppm)₂(CO)₄]⁺ has been addressed theoretically in order to predict the nature of the lowest energy electronic bands. For this class of compounds, the lowest energy bands are assigned to charge transfers from the Co center to the Pd₂ centers.     

The versatile coordination chemistry of tricyanoethenolate, [(NC)2C=C(CN)O]

The reaction of meso-tetrakis (4-dimethoxyphenyl) porphinatomanganese(II), MnTP_OMeP, with TCNE (TCNE = tetracyanoethylene) leads to the formation of [MnTP_OMeP]⁺ [TCNE]⁻ and [MnTP_OMeP]⁺[OC(CN)C(CN)₂]⁻. The single-crystal X-ray structures of the latter as well as [Cu(bipy)₂Cl]⁺ [OC(CN)C(CN)₂]⁻ were determined. The former has a disordered [OC(CN)C(CN)₂]⁻ bridging via C and O between a pair of Mn^III sites, whereas the latter has an isolated [OC(CN)C(CN)₂]⁻ unbound to Cu^II. The IR characterization for μ₂-C,O bound [OC(CN)C(CN)₂]⁻ is at 2219m and 2196s (νCN) cm⁻¹ and at 1558s (νCO) cm⁻¹ while for unbound [OC(CN)C(CN)₂]⁻ it is at 2210m, 2203m, 2181m (νCN) cm⁻¹ and at 1583s (νCO) cm⁻¹.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

The synthesis, fluctionality and structural characterization of ReMo3H4(CO)12

The reaction of ReH₉²⁻ with Mo(diglyme)(CO)₃ leads to the formation of the mixed metal cluster trianion, ReMo₃H₄(CO)₁₂³⁻. This species has been characterized analytically, spectroscopically and through X-ray diffraction analysis. A pseudo-tetrahedral arrangement of M(CO)₃ fragments is adopted, such that each set of three carbonyl ligands eclipses the adjacent three tetrahedral edges, an apparent result of the location of the hydride ligands on the tetrahedral faces. Variable temperature NMR studies revealed a fluctional process for some of the carbonyl ligands, but not for the hydrides. Crystal data for [Me₄N]₃[ReMo₃H₄(CO)₁₂]·THF; space group P2₁/n, a = 12.157(2), B = 21.480(4), C = 15.964(3) Å, β = 98.26(1)°, Z = 4, R = 0.067 and R_w = 0.076.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Spectroscopic and electrical properties of the [W(C3Se5)3] anion complex (C3Se5 = 1,3-diselenole-2-selone-4,5-diselenolate) and the oxidized species

[NBuⁿ₄]₂[W(C₃Se₅)₃] (C₃Se₅²⁻ = 1,3-diselenole-2-selone-4,5- diselenolate(2−)) was prepared by the reaction of Na₂[C₃Se₅] with WCl₆ in ethanol, followed by addition of [NBuⁿ₄]Br. The cyclic voltammogram in dichloromethane exhibits two oxidation peaks at −0.04 and +0.03 V (versus SCE). The complex reacted with [Fe(C₅Me₅)₂][BF₄], iodine or [TTF]₃[BF₄]₂ (TTF^·+ = the tetrathiafulvalenium radical cation) in acetonitrile to afford the oxidized complexes [Fe(C₅Me₅)₂]_0.5[W(C₃Se₅)₃], [NBuⁿ₄]_0.1[W(C₃Se₅)₃] and [TTF]_0.5[W(C₃Se₅)₃], respectively. Current-controlled electrochemical oxidation of the complex in acetonitrile gave [NBuⁿ₄]_0.6[W(C₃Se₅)₃]. The oxidized complexes exhibit electrical conductivities of 4.7×10 ⁻⁵−1.5×10⁻³ S cm⁻¹ at room temperature measured for compacted pellets. Electronic absorption, IR and ESR spectra of these complexes are discussed.     

Model reactions of a carbonylation catalyst: phosphite induced migratory CO insertion in [MeIr(CO)2I3]

Carbonylation of the anionic iridium(III) methyl complex, [MeIr(CO)₂I₃]⁻ (1) is an important step in the new iridium-based process for acetic acid manufacture. A model study of the migratory insertion reactions of 1 with P-donor ligands is reported. Complex 1 reacts with phosphites to give neutral acetyl complexes, [Ir(COMe)(CO)I₂L₂] (L = P(OPh)₃ (2), P(OMe)₃ (3)). Complex 2 has been isolated and fully characterised from the reaction of Ph₄As[MeIr(CO)₂I₃] with AgBF₄ and P(OPh)₃; comparison of spectroscopic properties suggests an analogous formulation for 3. IR and ³¹P NMR spectroscopy indicate initial formation of unstable isomers of 2 which isomerise to the thermodynamic product with trans phosphite ligands. Kinetic measurements for the reactions of 1 with phosphites in CH₂Cl₂ show first order dependence on [1], only when the reactions are carried out in the presence of excess iodide. The rates exhibit a saturation dependence on [L] and are inhibited by iodide. The reactions are accelerated by addition of alcohols (e.g. 18× enhancement for L = P (OMe)₃ in 1:3 MeOH-CH₂Cl₂). A reaction mechanism is proposed which involves substitution of an iodide ligand by phosphite, prior to migratory CO insertion. The observed rate constants fit well to a rate law derived from this mechanism. Analysis of the kinetic data shows that k₁, the rate constant for iodide dissociation, is independent of L, but is increased by a factor of 18 on adding 25% MeOH to CH₂Cl₂. Activation parameters for the k₁ step are ΔH^≠ = 71 (±3) kJ mol⁻, ΔS^≠ = −81 (±9) J mol⁻¹ K⁻¹ in CH₂Cl₂ and ΔH^≠ = 60(±4) kJ mol⁻¹, ΔS^≠ = −93(± 12) J mol⁻¹ K⁻¹ in 1:3 MeOH-CH₂Cl₂. Solvent assistance of the iodide dissociation step gives the observed rate enhancement in protic solvents. The mechanism is similar to that proposed for the carbonylation of 1.     

The propensity of alkoxide and aryloxide derivatives of tungsten carbonyls to aggregate in solution. Synthesis and X-ray structures of dinuclear, trinuclear and tetranuclear complexes derived from the MeOW(CO)5 anion

The complex [Et₄N][W(CO)₅OMe] (1) has been prepared from the reaction of the photochemically generated W(CO)₅THF adduct and [Et₄N][OH] in methanol. Complex 1 was shown to undergo rapid CO dissociation in THF to quantitatively provide the dimeric dianion, [W(CO)₄OMe]₂²⁻. The resulting THF insoluble salt [Et₄N]₂[W(CO)₄OMe]₂ (2) has been structurally characterized by X-ray crystallography, with the doubly bridging methoxide ligands being in an anti configuration. Complex 2 was found to subsequently react with excess methoxide ligand in a THF slurry to afford the face-sharing octahedron complex [Et₄N]₃[W₂(CO)₆(OMe)₃] (3) which contains three doubly bridging methoxide groups. In the absence of excess methoxide ligand complex 2 cleanly yields the tetrameric complex [Et₄N]₄[W(CO)₃OMe]₄ (4) which has been structurally characterized as a cubane-like arrangement with triply bridging μ³-methoxide groups and W(CO)₃ units. Although complex 3 was not characterized in the solid state, the closely related glycolate derivative [Et₄N]₃[W₂(CO)₆(OCH₂CH₂OH)₃] (5) was synthesized and its structure determined by X-ray crystallography. The trianions of complex 5 are linked in the crystal lattice by strong intermolecular hydrogen bonds. Crystal data for 2: space group P2₁/n, a = 7.696(2), b = 22.019(4), c = 9.714(2) Å, β = 92.22(3)°, Z = 4, R = 6.43%. Crystal data for 4: space group Fddd, a = 12.433(9), b = 24.01(2), c = 39.29(3) Å, Z = 8, R = 8.13%. Crystal data for 5: space group P2₁2₁2₁, a = 11.43(2), b = 12.91(1), c = 29.85(6) Å, Z = 8, R = 8.29%. Finally, the rate of CO ligand dissociation in the closely related aryloxide derivatives [Et₄N][W(CO)₅OR] (R = C₆H₅ and 3,5-F₂C₆H₃) were measured to be 2.15 × 10⁻² and 1.31 × 10⁻³ s⁻¹, respectively, in THF solution at 5°C. Hence, the value of the rate constant of 2.15 × 10⁻² s⁻¹ establishes a lower limit for the first-order rate constant for CO loss in the W(CO)₅OMe⁻ anion, since the methoxide ligand is a better π-donating group than phenoxide.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Synthesis and structures of the cuboidal iron-sulfur-nitrosyl-phosphine clusters [Fe4S3(NO)4(PR3)3] (R = Et, Pr, C6H11)

A series of cuboidal iron-sulfur clusters [Fe₄S₃(NO)₄(PR₃)₃]^0,1+ (R = Et, Prⁱ, Cy) were synthesized by two routes: reductive desulfurization of [Fe₄S₄(NO)₄] by tertiary phosphines, and substitution of triphenylphosphine in [Fe₄4S₃(NO)₄(PPh₃)₃] by a more basic phosphine. The structures of 3[Fe₄S₃(NO)₄(PEt₃)₃] · 0.5Et₂O, [Fe₄S₃(NO)₄(PEt₃)₃] [Fe₄S₃(NO)₇] and partially substituted [Fe₄S₃(NO)₄(PPh₃)_2⁻ (PPrⁱ₃)] have been determined by X-ray diffraction in order to define the cuboidal Fe₄S₃ core, previously known only in Roussin's black anion and its reduced form, [Fe₄S₃(NO)₇7]^1−,2−, and as a part of the iron-molybdenum cofactor of nitrogenase.     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

Ligand-mediated metal-metal interactions in (ν:ν-fulvalene) bis (dicarbonylcobalt) and rhodium complexes

Gas phase photoelectron spectroscopy (PES) is used to investigate the bonding and electronic structure in (fv) [M(CO)₂]₂ (fv = fulvalene, η⁵:η⁵-C₁₀H₈²⁻; M = Co, Rh). The results for these bimetallic complexes are also compared to those for the analogous monometallic complexes CpM(CO)₂ (Cp = η⁵−C₅H₅⁻; M = Co, Rh) which have been reported previously. The low valence ionization patterns observed for CpCo(CO)₂ and (fv)[Co(CO)₂]₂ are very similar, indicating that there is little electronic interaction between the two metals of the dicobalt complex. The spectrum of (fv)[Rh(CO)₂]₂ also is very similar to the spectrum of CpRh(CO)₂, except that the first metal ionizations in the bimetallic rhodium compound show a significant splitting (0.45 eV). This splitting is due to electronic interaction between the two metal centers which occurs via communication through the fulvalene π system. The differences in electronic structure are compared to the differences in electrochemical behavior of the Co and Rh fulvalene complexes.     

In situ IR and NMR study of the interactions between proton donors and the Re(I) hydride complex [{MeC(CH2PPh2)3}Re (CO)2H]. ReH…H bonding and proton-transfer pathways

The reactions of various proton donors (phenol, hexafluoro-2-propanol, perfluoro-2-methyl-2-propanol, monochloroacetic acid, and tetrafluoroboric acid) with the rhenium (I) hydride complex [(triphos)Re(CO)₂H] (1) have been studied in dichloromethane solution by in situ IR and NMR spectroscopy. The proton donors from [(triphos)Re(CO)₂H…HOR] adducts exhibiting rather strong H…H interactions. The enthalpy variations associated with the formation of the H-bonds (−ΔH = 4.4–6.0 kcal mol⁻¹) have been determined by IR spectroscopy, while the H…H distance in the adduct [(triphos)Re(CO)₂H…HOC(CF₃)₃] (1.83 Å) has been calculated by NMR spectroscopy through the determination of the T_1min relaxation time of the Re---H proton. It has been shown that the [(triphos)Re(CO)₂H…HOR] adducts are in equilibrium with the dihydrogen complex [(triphos)Re(CO)₂(η²-H₂)]⁺, which is thermodynamically more stable than any H-bond adduct.