Molecular genetic analysis of bacterial plasmid promiscuity

Abstract The molecular genetic basis of the promiscuity of the wide host range conjugative IncP-1α plasmids has been investigated by transposon mutagenesis and by the construction of minireplicons. The former has identified the origin of plasmid vegetative replication, the replication genes needed for initiation of plasmid replication, the DNA primase gene and a gene encoding a polypeptide of 52 kDa and mapping near the origin of plasmid transfer as all contributing to promiscuity. Minireplicon constructions confirm this conclusion but in addition establish that the origins of replication, transfer and other genomic regions produce complex interactions with respect to host range. DNA sequence analysis within the origin of replication show that the first direct repeat of the cluster of five repeats and sequences immediately 5' to it appear to be required in some ( Escherichia coli ) but not in other ( Pseudomonas aeruginosa ) hosts for plasmid replication.     

Genetic analysis of bacterial plasmid promiscuity

The genetic basis of the promiscuous behaviour of bacterial plasmids has been investigated by study of the incompatibility P-1 group of conjugative plasmids of gram-negative bacteria. Both transposon mutagenesis and the construction of minireplicons linking varying combinations of the plasmid genome have shown that specific genomic regions control the conjugational transfer and vegetative replication of the plasmid in specific bacterial hosts. These include the plasmid DNA primase gene, the origin of plasmid transfer, a region near the origin of transfer, the origin of plasmid vegetative replication, thetrans- acting gene essential for the initiation of plasmid replication and a region involved in its regulation. DNA sequence analysis has identified the requirement of specific direct repeats within the origin of replication for plasmid replication in some but not in other hosts. The cloning of some of the trans-acting genes onto multicopy cloning vectors and complementation tests have shown that the requirements of these gene products vary in different hosts and that the plasmid has evolved genetic strategies for their optimal expression.     

Replication of plasmids in gram-negative bacteria.

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.     

The DNa-protein relaxation complex of the plasmid RK2: Location of the site-specific nick in the region of the proposed origin of transfer

Summary The broad host range plasmid, RK2, has been isolated as a DNA-protein relaxation complex. Nicking of the plasmid DNA in the relaxation complex occurs at a single specific site (rlx) located approximately 20 kb away from the origin of DNA replication. A cis-acting function required for plasmid transfer, the presumptive origin of transfer, maps in the same region as rlx. The region of RK2 encompassing rlx has been cloned onto pBR322 and shown to promote mobilization of the hybrid plasmid by an RK2 derivative. These results indicate that the RK2 relaxation complex nicks at or near the origin of transfer of the RK2 plasmid.     

Tn7 insertion mutations affecting the host range of the promiscuous IncP-1 plasmid R18

The genetic basis of plasmid host range has been investigated by Tn7 insertion mutagenesis of the promiscuous plasmid R18 in Pseudomonas aeruginosa. Six mutants have been isolated on the basis of greatly reduced transferability into Escherichia coli C while retaining normal transferability within P. aeruginosa. Their physical mapping shows that two of them map at coordinate 11.72 ± 0.14 kb, in the region of the origin of plasmid replication (oriV) and one at 18.0 ± 0.3 kb, in the trans-acting gene essential for initiation of replication at oriV (trfA). Three map at 48.4 ± 0.5 kb in the region of the origin of plasmid transfer (oriT) and the site at which a single-strand nick is introduced in the plasmid DNA-protein relaxation complex (rlx). Consistent with the postulated defective replication of the oriV and trfA mutants was their inability to transform E. coli C or K12 while being able to transform P. aeruginosa. As expected the oriT/rlx mutants transformed both hosts as effectively as R18. Furthermore the trfA mutant was readily curable by mitomycin C in a DNA polymerase I-proficient P. aeruginosa and spontaneously lost from a polymerase-deficient mutant of P. aeruginosa suggesting a role of this polymerase in the replication of R18. Extensive transfer tests from P. aeruginosa into a range of enteric bacteria, other Pseudomonas species and into other Gram-negative bacteria indicated a complex host range pattern for these mutants. It appears that both plasmid replication and conjugation genes are responsible for host range in addition to the involvement of host gene products.     

Narrow-host-range IncP plasmid pHH502-1 lacks a complete IncP replication system

Plasmid pHH502-1 shows incompatibility only towards members of the IncP group, but has a narrower host range than typical members of that group. In contrast to other IncP plasmids its replication was not affected by a high-copy-number plasmid carrying the replication origin (oriV) of IncP plasmid RK2. Southern blotting of pHH502-1 revealed homology to oriV, consistent with its incompatibility phenotype, but no homology to trfA, the essential replication gene of RK2. Thus it is probable that pHH502-1 does not possess a functional IncP replication system, accounting for its restricted host range. A restriction map of pHH502-1 was constructed and the mercury-resistance determinant was localized to Tn735, which also carries the trimethoprim-resistance determinant and is related to Tn21. The presence of a korB-like function on pHH502-1 was also demonstrated.     

DNA sequence analysis of host range mutants of the promiscuous IncP-1 plasmids R18 and R68 with Tn7 insertions in oriV

Transposon Tn7 insertions in the origin of vegetative replication (oriV) result in host range mutants of the promiscuous IncP-1 plasmids R18 and R68 which affect plasmid replication in Escherichia coli but not in Pseudomonas aeruginosa. The sites of these insertions have been analyzed by DNA sequence analysis. In two mutants, the insertions generated direct duplications of 5′GTATT3′ at the target site which included the first base at the 5′ end of the fourth 17-bp direct repeat in oriV. In a third mutant the duplication of 5′GACAC3′ also involved the same direct repeat also at the 5′ end but contiguous with the previous duplication. DNA sequence analysis of another Tn7-induced host range mutant of R18, characterized by reduced conjugational transmissibility into P. stutzeri while retaining normal transmissibility within P. aeruginosa, showed that the insertion generated a 474-bp deletion which brought the insertion 20 bp 5′ to the 17-bp direct repeat between oriV and the oxytetracycline hydrochloride-resistant gene. The analysis of the DNA sequence data at the site of the Tn7 insertions shows that particular segments of the DNA sequence in oriV are differentially required for the replication of these plasmids in different bacterial hosts and thus of importance to the promiscuity of these plasmids.     

Plasmid transfer by conjugation from Escherichia coli to Gram-positive bacteria

Abstract We have developed a vector strategy that allows transfer of plasmid DNA by conjugation from Escherichia coli to various Gram-positive bacteria in which transformation via natural competence has not been demonstrated. The prototype vector constructed, pAT187, contains the origins of replication of pBR322 and of the broad host range streptococcal plasmid pAMβ1, a kanamycin resistance gene known to be expressed in both Gram-negative and Gram-positive bacteria, and the origin of transfer of the IncP plasmid RK2. This shuttle plasmid can be mobilised efficiently by the self-transferable IncP plasmid pRK212.1 co-resident in the E. coli donors, and was successfully transferred by filter matings at frequencies of 2 × 10⁻⁸ to 5 × 10⁻⁷ to Enterococcus faecalis, Streptococcus lactis, Streptococcus agalactiae, Bacillus thuringiensis, Listeria monocytogenes and Staphylococcus aureus .     

Klebsiella pneumoniae origin of replication (oriC) is not active in Caulobacter crescentus, Pseudomonas putida, and Rhodobacter sphaeroides.

A DNA fragment carrying genes encoding the conjugal transfer system of the broad host range plasmid RK2 was inserted into a plasmid carrying the chromosomal origin of replication (oriC) from Klebsiella pneumoniae. The resulting plasmid, pEON1, was readily transferred between gram-negative bacteria and carried two potential origins of replication: oriC and the replication origin from pBR322 (oriPBR). Although pEON1 could be transferred to Caulobacter crescentus, Pseudomonas putida, and Rhodobacter sphaeroides, pEON1 was not maintained in these strains. However, an oriC-containing plasmid was maintained in these nonenteric bacteria when an RK2 origin of replication was present on the plasmid. Thus, the inability of pEON1 to be established in a nonenteric bacterium represents a failure of oriC to function as an origin of replication rather than a toxic effect of oriC. The initiation potential of the chromosomal origin of replication from K. pneumoniae appears to be realized only in enteric bacteria.     

Nucleotide sequence and analysis of conjugative plasmid pVT745

The complete nucleotide sequence and genetic map of pVT745 are presented. The 25-kb plasmid was isolated from Actinobacillus actinomycetemcomitans, a periodontal pathogen. Two-thirds of the plasmid encode functions related to conjugation, replication, and replicon stability. Among potential gene products with a high degree of similarity to known proteins are those associated with plasmid conjugation. It was shown that pVT745 derivatives not only mobilized a coresident nontransmissible plasmid, pMMB67, but also mediated their own conjugative transfer to different A. actinomycetemcomitans strains. However, transfer of pVT745 derivatives from A. actinomycetemcomitans to Escherichia coli JM109 by conjugation was successful only when an E. coli origin of replication was present on the pVT745 construct. Surprisingly, 16 open reading frames encode products of unknown function. The plasmid contains a conserved replication region which belongs to the HAP (Haemophilus-Actinobacillus-Pasteurella) theta replicon family. However, its host range appears to be rather narrow compared to other members of this family. Sequences homologous to pVT745 have previously been detected in the chromosomes of numerous A. actinomycetemcomitans strains. The nature and origin of these homologs are discussed based on information derived from the nucleotide sequence.     

Genetic organization of plasmid R1162 DNA involved in conjugative mobilization.

DNA involved in the mobilization of broad-host-range plasmid R1162 was localized to a region of 2.7 kilobases within coordinates 3.4 to 6.1 kilobases on the R1162 map. By examining the transfer properties of plasmids containing cloned fragments of DNA from within this region, we showed that at least four trans-active products and a cis-active site (oriT) were involved in mobilization. A cloned DNA fragment of 155 base pairs was capable of providing full oriT activity. This fragment was located within 600 base pairs of DNA containing the origin of replication of R1162, and its nucleotide sequence and that of neighboring DNA were determined. Activation of oriT required R1162-encoded, trans-acting products. Deletions which resulted in the loss of one or more of these had a variable effect on transfer efficiency and indicated the presence of both essential and nonessential Mob products. Regions encoding these products flanked oriT and in one case appeared to overlap a gene essential for plasmid replication. The implications of these findings with respect to the broad host range of R1162 are discussed.     

A new IncQ plasmid R89S: Properties and genetic organization

The new small (8.18 kb) streptomycin-resistant multicopy plasmid R89S of the Q group incompatibility is described. In contrast to other IncQ plasmids, replication of R89S is dependent on DNA polymerase 1 and proceeds in the absence of de novo protein synthesis. According to our data up to now, the host spectrum of the plasmid R89S is limited to Enterobacteriaceae. A genetic map of the plasmid R89S has been prepared through the construction of deletion and insertion derivatives. Phenotypic analysis of these derivatives has identified the location of genes encoding resistance to streptomycin, and the region essential for mobilization of R89S. The origin of vegetative replication has been located within a 0.7-kb fragment. Another region highly homologous to oriV of the plasmid RSF1010, but not functioning as an origin of replication, was localized. Two regions involved in the expression of incompatibility have also been identified. The data from the restriction analyses, DNA-DNA hybridization, and genetic experiments enable us to assume that the plasmid R89S is a naturally occurring recombinant between part of an IncQ plasmid and another narrow host range replicon of unknown incompatibility group.     

质粒RSF1010寄主范围特性的遗传学分析

采用Tn5插入诱变、限制性核酸内切酶作图以及DNA转化等方法,对广泛寄主范围型质粒SF 1010的衍生体－pKT 2 40进行研究。证实质粒的寄主围决定于它在遗传背景不同的寄主中复制并保存自身的能力,而repA,rcpB和repC基因为该质拉复制所必需。     

Boundaries of the pSC101 minimal replicon are conditional.

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.     

Insertion mutations in the promiscuous IncP-1 plasmid R18 which affect its host range between Pseudomonas species

Fifty-one host range mutants of the promiscuous plasmid R18 were isolated by Tn7 insertion mutagenesis by using Pseudomonas aeruginosa as the permissive, and P. stutzeri as the nonpermissive, host. Endonuclease cleavage mapping of 40/51 mutants showed that 37 mutations mapped to kilobase coordinates 40.3-43.8 in the two overlapping genes encoding plasmid DNA primase. Thus by this procedure it has been possible readily to isolate a large number of primase mutants. The majority of these mutations mapped to the overlapping DNA whereas a few also mapped to the nonoverlap region encoding the larger 118-kDa polypeptide. Among these mutants were four which had long deletions within the overlapping segment and extending to varying lengths anticlockwise of it. The genetic defect in these mutants has been correlated with greatly reduced in vitro primase enzyme activity. The primase mutations drastically affected the mutant's ability to mobilize a nonconjugative, wide-host-range IncP-4(Q) plasmid from P. aeruginosa to P. stutzeri although mobilization within P. aeruginosa was affected to a lesser degree. Other insertion mutations were mapped to the regions of plasmid origin of transfer (oriT) and origin of replication (oriV), but their physical location was different to previously identified similar mutations obtained using Escherichia coli as the nonpermissive host. Their physically distinct locations were correlated with differences in their transmissibility from P. aeruginosa into enteric bacterial species and into other Pseudomonas species.     

Characterization of a Large, Stable, High-Copy-Number Streptomyces Plasmid That Requires Stability and Transfer Functions for Heterologous Polyketide Overproduction

A major limitation to improving small-molecule pharmaceutical production in streptomycetes is the inability of high-copy-number plasmids to tolerate large biosynthetic gene cluster inserts. A recent finding has overcome this barrier. In 2003, Hu et al. discovered a stable, high-copy-number, 81-kb plasmid that significantly elevated production of the polyketide precursor to the antibiotic erythromycin in a heterologous Streptomyces host (J. Ind. Microbiol. Biotechnol. 30:516-522, 2003). Here, we have identified mechanisms by which this SCP2*-derived plasmid achieves increased levels of metabolite production and examined how the 45-bp deletion mutation in the plasmid replication origin increased plasmid copy number. A plasmid intramycelial transfer gene, spd, and a partition gene, parAB, enhance metabolite production by increasing the stable inheritance of large plasmids containing biosynthetic genes. Additionally, high product titers required both activator (actII-ORF4) and biosynthetic genes (eryA) at high copy numbers. DNA gel shift experiments revealed that the 45-bp deletion abolished replication protein (RepI) binding to a plasmid site which, in part, supports an iteron model for plasmid replication and copy number control. Using the new information, we constructed a large high-copy-number plasmid capable of overproducing the polyketide 6-deoxyerythronolide B. However, this plasmid was unstable over multiple culture generations, suggesting that other SCP2* genes may be required for long-term, stable plasmid inheritance.     

Replication and Control of Circular Bacterial Plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3′-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can “sense” and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.