Physical and genetic map of the Methanobacterium wolfei genome and its comparison with the updated genomic map of Methanobacterium thermoautotrophicum Marburg

A physical and genetic map of the chromosome of Methanobacterium wolfei was constructed by using pulsed-field gel electrophoresis of restriction fragments generated by digestion with NotI and NheI. The chromosome was found to be circular and 1,729 kb in size. Twenty-eight genes were mapped to specific restriction enzyme fragments by performing hybridization experiments with gene probes from various Methanobacterium strains. The genomic map obtained was compared with the updated genomic map of Methanobacterium thermoautotrophicum Marburg. In spite of major restriction pattern dissimilarities, the overall genetic organization seemed to be conserved between the genomes of the two strains. In addition, the two rRNA operons of strain Marburg were precisely mapped on the chromosome, and it was shown that they are transcribed in the same direction.     

The mapping of phytochrome genes and photomorphogenic mutants of tomato

The map positions of five previously described phytochrome genes have been determined in tomato (Lycopersicon esculentum Mill.) The position of the yg-2 gene on chromosome 12 has been confirmed and the classical map revised. The position of the phytochrome A (phy A)-deficient fri mutants has been refined by revising the classical map of chromosome 10. The position of the PhyA gene is indistinguishable from that of the fri locus. The putative phyB1-deficient tri mutants were mapped by classical and RFLP analysis to chromosome 1. The PhyB1 gene, as predicted, was located at the same position. Several mutants with the high pigment (hp) phenotype, which exaggerates phytochrome responses, have been reported. Allelism tests confirmed that the hp-2 mutant is not allelic to other previously described hp (proposed here to be called hp-1) mutants and a second stronger hp-2 allele (hp-2 ^j ) was identified. The hp-2 gene was mapped to the classical, as well as the RFLP, map of chromosome 1. Received: 24 May 1996 / Accepted: 14 June 1996     

Genome and Chromosome Dimensions of Lotus japonicus

Lotus Japonicus , Miyakojima MG-20 and Gifu B-129. The genome sizes of Miyakojima and Gifu were determined as 472.1 and 442.8 Mbp, respectively. Both the accessions were diploid (2n=12) and six chromosomes were identified and characterized based on the condensation patterns and the locations of rDNA loci. The obvious polymorphism observed in the genome size and the chromosome morphology between the two accessions, revealed specific accumulation of heterochromatin in Miyakojima or elimination in Gifu. The chromosomes L. japonicus were numbered according to their length. A quantitative chromosome map was also developed by the imaging methods using the digital data of the condensation pattern. 45S rDNA loci were localized on chromosomes A and F, and 5S rDNA locus was localized on chromosome A by fluorescence in situ hybridization (FISH). Identification of the chromosome and genome sizes and development of the quantitative chromosome map represent significant contribution to the L. japonicus genome project as the basic information. Received 29 August 2000/ Accepted in revised form 17 October 2000     

Radiation hybrid mapping of the canine type I and type IV collagen gene subfamilies

We are interested in the collagen gene superfamily and its involvement in hereditary diseases of the human and domestic dog. Presented here is radiation hybrid mapping of the type I and type IV collagen gene subfamilies on the most recent version of the canine map. The col1A1 gene was mapped to chromosome 9, col1A2 was mapped to chromosome 14, col4A1 and col4A2 were mapped to chromosome 22 and col4A3 and col4A4 were mapped to chromosome 25. The col4A5 and col4A6 genes, while linked to one another, are not linked in the present version of the canine map but likely are present on the X chromosome. These data provide an insight into the molecular evolution of these subfamilies and increase the number of mapped genes in discrete regions of the canine genome. J.K. Lowe and R. Guyon contributed equally to this work Sequences determined during the course of this work have been deposited in GenBank. Accession numbers are AF291995 (col1A1) and AF291996 (col1A2)     

Chromosome mapping in Alealigenes eutrophus CH34

Mutants and mobilizing plasmids were developed as genetic tools in Alcaligenes eutrophus CH34. In order to map the chromosome, spontaneous and ethyl methane sulphonate (EMS)-induced mutants (mostly auxotrophs) were isolated. Another source of mutants was provided by the phenomenon of temperature-induced mortality and mutagenesis that is observed at 37° C and is characteristic of many metallotolerant strains of A. eutrophus. Plasmid pULB113 (RP4::miniMu) was used to map the available mutations. Twenty-five loci were ordered in a circular map. pMOL50, a rearranged derivative of plasmid pMOL28, which was obtained in a survivor at 37° C and displayed chromosome mobilizing activity (Cma+), was also used to mobilize chromosomal markers: resulting linkages were stronger than with pULB113, allowing confirmation of the circularity of the A. eutrophus CH34 chromosome with a small number of crosses.     

An improved physical and genetic map of the genome of alkaliphilic Bacillus sp. C-125

Among alkaliphilic bacteria reported so far, Bacillus sp. C-125 is the strain most thoroughly characterized physiologically, biochemically, and genetically. A physical map of the chromosome of this strain was constructed to facilitate further genome analysis, and the genome size was revised from 3.7 to 4.25 Mb. Complete digestion of the chromosomal DNA with two rare cut restriction endonucleases, AscI and Sse8387I, each yielded 20 fragments ranging in size from 20 to 600 kb. Seventeen linking clones were isolated in each instance to join the adjacent AscI or Sse8387I fragments in the chromosomal map. All AscI linking clones isolated were sequenced and analyzed by comparison with the BSORF database to map the genes in the chromosome of strain C-125. Several ORFs showing significant similarities to those of B. subtilis in the AscI linking clones were positioned on the physical map. The oriC region of the C-125 chromosome was identified by southern blot analysis with a DNA probe containing the gyrB region. Received: May 6, 1998 / Accepted: May 26, 1998     

High-density physical maps reveal that the dominant male-sterile gene Ms3 is located in a genomic region of low recombination in wheat and is not amenable to map-based cloning

In wheat it is essential to know whether a gene is located in a high or low recombination region of the genome before initiating a map-based cloning approach. The objective of this study was to explore the potential feasibility of map-based cloning of the dominant male-sterile gene Ms3 of wheat. High-density physical maps of the short arms of the group-5 chromosomes (5AS, 5BS, and 5DS) of Triticum aestivum L. were constructed by mapping 40 DNA markers on a set of 17 homozygous deletion lines. One hundred RFLP loci were mapped: 35 on 5AS, 37 on 5BS, and 28 on 5DS. A consensus physical map was colinearly aligned with a consensus genetic map of the group-5 short arms. Sixteen of the 17 markers in the consensus genetic map encompass a genetic distance of 25 cM and correspond to the distal region (FL 0.56–0.97) of the consensus physical map. Two rice probes, RG463 and RG901, previously identified to be linked to markers CDO344 and CDO749 (group-5 short arm of wheat), respectively, in the genetic map of rice chromosome 12, map between FL 0.56 and 0.63 in the consensus map. Thus at least a part of the group-5 short arm is homoeologous to a region of chromosome 12 of rice. The genetic map of chromosome arm 5AS was constructed using a population of 139 BC₁ plants derived from a cross between the euploid wheat ”Chris” carrying a dominant male-sterile gene Ms3 and a disomic substitution line in which chromosome 5A of T. aestivum cv Chinese Spring was substituted by chromosome 5A from Triticum turgidum ssp. dicoccoides. The map has a genetic length of 53.4 cM with 11 DNA markers. The initial map showed that the gene Ms3 cosegregated with three markers, WG341, BCD1130 and CDO677. High-resolution mapping using an additional 509 BC₁ plants indicated that the marker WG341 was closely linked to Ms3 at a genetic distance of 0.8 cM. The Ms3 was mapped physically in the region spanning 40% of the arm length from the centromere of 5AS. Therefore, map-based cloning of the Ms3 is not feasible, although WG341 can be used as a useful tag for the Ms3 gene for breeding purposes. Received: 12 December 2000 / Accepted: 26 January 2001     

A molecular genetic map of the long arm of chromosome 6R of rye incorporating the cereal cyst nematode resistance gene, CreR

 A genetic map of the long arm of chromosome 6R of rye was constructed using eight homoeologous group-6 RFLP clones and five PCR markers derived from the rye-specific dispersed repetitive DNA family, R173. The map was developed using a novel test-cross F₁ (TC-F₁) population segregating for resistance to the cereal cyst nematode. Comparisons were made between the map generated with other rye and wheat group-6 chromosome maps by the inclusion of RFLP clones previously mapped in those species. Co-linearity was observed for common loci. This comparison confirmed a dramatic reduction in recombination for chromosome 6R in the TC-F₁ population. The CreR locus was included in the linkage map via progeny testing of informative TC-F₁ individuals. CreR mapped 3.7 cM distal from the RFLP locus, XksuF37. Comparative mapping should allow the identification of additional RFLP markers more closely linked to the CreR locus. Received: 14 April 1998 / Accepted: 29 April 1998     

Construction of a 5000<Subscript>rad</Subscript> whole-genome radiation hybrid panel in the horse and generation of a comprehensive and comparative map for ECA11

A 5000_rad whole-genome radiation hybrid (RH) panel was created for the horse. The usefulness of the panel for generating physically ordered maps of individual equine chromosomes was tested by typing 24 markers on horse Chromosome 11 (ECA11). The overall retention of markers on this chromosome was 43.6%. Almost complete retention of two of the typed markers—CA062 and AHT44—clearly indicated the location of thymidine kinase gene on the short arm of ECA11. Seven of the typed markers were FISH mapped to align the RH and cytogenetic maps. With the RH-MAPPER approach, a physically ordered map comprising four linkage groups and incorporating all the markers was obtained. The study provides the first comprehensive map for a horse chromosome that integrates all available mapping data and adds new information that spans the entire length of the equine chromosome. The map clearly underlines the resolving power and utility of the panel and emphasizes the need to have uniformly distributed cytogenetic markers for appropriate alignment of RH map with the chromosome. A comparative status of the ECA11 map in relation to the corresponding human/mouse chromosome is presented. Received: 7 June 2001 / Accepted: 4 October 2001     

Identification of QTL regions and SSR markers associated with resistance to reniform nematode in <Emphasis Type="Italic">Gossypium barbadense</Emphasis> L. accession GB713

The identification of molecular markers that are closely linked to gene(s) in Gossypium barbadense L. accession GB713 that confer a high level of resistance to reniform nematode (RN), Rotylenchulus reniformis Linford & Oliveira, would be very useful in cotton breeding programs. Our objectives were to determine the inheritance of RN resistance in the accession GB713, to identify SSR markers linked with RN resistance QTLs, and to map these linked markers to specific chromosomes. We grew and scored plants for RN reproduction in the P₁, P₂, F₁, F₂, BC₁P₁, and BC₁P₂ generations from the cross of GB713 × Acala Nem-X. The generation means analysis using the six generations indicated that one or more genes were involved in the RN resistance of GB713. The interspecific F₂ population of 300 plants was genotyped with SSR molecular markers that covered most of the chromosomes of Upland cotton (G. hirsutum L.). Results showed two QTLs on chromosome 21 and one QTL on chromosome 18. One QTL on chromosome 21 was at map position 168.6 (LOD 28.0) flanked by SSR markers, BNL 1551_162 and GH 132_199 at positions 154.2 and 177.3, respectively. A second QTL on chromosome 21 was at map position 182.7 (LOD 24.6) flanked by SSR markers BNL 4011_155 and BNL 3279_106 at positions 180.6 and 184.5, respectively. Our chromosome 21 map had 61 SSR markers covering 219 cM. One QTL with smaller genetic effects was localized to chromosome 18 at map position 39.6 (LOD 4.0) and flanked by SSR markers BNL 1721_178 and BNL 569_131 at positions 27.6 and 42.9, respectively. The two QTLs on chromosome 21 had significant additive and dominance effects, which were about equal for each QTL. The QTL on chromosome 18 showed larger additive than dominance effects. Following the precedent set by the naming of the G. longicalyx Hutchinson & Lee and G. aridum [(Rose & Standley) Skovsted] sources of resistance, we suggest the usage of Ren ^barb1 and Ren ^barb2 to designate these QTLs on chromosome 21 and Ren ^barb3 on chromosome 18.     

A genetic map of <Emphasis Type="Italic">Lophopyrum ponticum</Emphasis> chromosome 7E,harboring resistance genes to Fusarium head blight and leaf rust

The leaf rust resistance gene Lr19 and Fusarium head blight (FHB) resistance quantitative trait loci (QTL) derived from the wild wheatgrass Lophopyrum ponticum have been located on chromosome 7E. The main objectives of the present study were to develop a genetic map of chromosome 7E and map the two resistance loci using a population of 237 F_7:8 recombinant inbred lines (RILs) derived from a cross between two Thatcher-L. ponticum substitution lines, K11463 (7el₁(7D)) and K2620 (7el₂(7D)). 532 G-SSR, E-SSR and STS markers from wheat chromosome group 7 were screened in the parent lines. Of these, 118 markers were polymorphic, with a polymorphism frequency of 22.2%. A genetic map of L. ponticum chromosome 7E was constructed with 64 markers, covering 95.76 cM, with an average genetic distance of 1.47 cM between markers. The major FHB resistance locus, temporarily assigned as FhbLoP, was mapped to the very distal region of the long arm of chromosome 7E within a 3.71 cM interval flanked by Xcfa2240 and Xswes19, which accounts for 30.46% of the phenotypic variance. Lr19 was bracketed by Xwmc273 and XBE404744, with a map distance of 1.54 and 1.43 cM from either side, respectively. The closely linked markers identified in this study will be helpful for marker-assisted introgression of the L. ponticum-derived FhbLoP and Lr19 genes into elite cultivars of wheat, and the development of a genetic map will accelerate the map-based cloning of these two genes.     

Chromosomal assignment of porcine microsatellites by use of a somatic cell hybrid mapping panel

A well-established and characterized somatic cell hybrid panel was used to map three polymorphic microsatellites. Microsatellite S0072, representing the linkage group S0007-S0072, was assigned to porcine chromosome 14. Micro-satellite S0009, representing the unassigned linkage group EAM-S0009-S0071, was assigned tentatively to porcine chromosome 11. Finally, S0062 was tentatively mapped to chromosome 18. S0062 may represent the first marker for porcine chromosome 18.     

A physical and genetic map of the Stigmatella aurantiaca DW4/3.1 chromosome

A physical map of the myxobacterium Stigmatella aurantiaca DW4/3.1 chromosome was constructed by pulsed-field gel (PFG) long-range mapping. One-and two-dimensional pulsed-field gel analyses were used together with reciprocal double-restriction, cross-hybridization and hybridization fingerprint analysis. These PFG results were confirmed by Smith-Birnstiel analysis, by Southern hybridization using linking clones and clones of a λ genomic library for the determination of adjacent restriction fragments and by transposon insertion mapping using defined genomic sequences for hybridization. It was thus possible to construct a circular restriction map of the single 9.35 Mbp chromosome of S. aurantiaca based on the endonucleases Asel and Spel. Genetic loci as well as the replication origin were located on the physical map by Southern hybridization using heterologous (derived from Myxococcus xanthus, Escherichia coli and Streptomyces lividans) and homologous probes that are mainly involved in development and ceil motility.     

Refined genetic and comparative physical mapping of the canine copper toxicosis locus

Recently, the copper toxicosis (CT) locus in Bedlington terriers was assigned to canine chromosome region CFA10q26, which is homologous to human chromosome region HSA2p13-21. A comparative map between CFA10q21-26 and HSA2p13-21 was constructed by using genes already localized to HSA2p13-21. A high-resolution radiation map of CFA10q21-26 was constructed to facilitate positional cloning of the CT gene. For this map, seven Type I and eleven Type II markers were mapped. Using homozygosity mapping, the CT locus could be confined to a 42.3 cR₃₀₀₀ region, between the FH2523 and C10.602 markers. On the basis of a partial BAC contig, it was estimated that 1-cR₃₀₀₀ is equivalent to approximately 210 kb, implying that the CT candidate region is therefore estimated to be about 9 Mb. Received: 16 December 1999 / Accepted: 23 February 2000     

Microsatellite mapping of a Triticum urartu Tum. derived powdery mildew resistance gene transferred to common wheat (Triticum aestivum L.)

A powdery mildew resistance gene from Triticum urartu Tum. accession UR206 was successfully transferred into hexaploid wheat (Triticum aestivum L.) through crossing and backcrossing. The F₁ plants, which had 28 chromosomes and an average of 5.32 bivalents and 17.36 univalents in meiotic pollen mother cells (PMC), were obtained through embryos rescued owing to shriveling of endosperm in hybrid seed of cross Chinese Spring (CS) × UR206. Hybrid seeds were produced through backcrossing F₁ with common wheat parents. The derivative lines had normal chromosome numbers and powdery mildew resistance similar to the donor UR206, indicating that the powdery mildew resistance gene originating from T. urartu accession UR206 was successfully transferred and expressed in a hexaploid wheat background. Genetic analysis indicated that a single dominant gene controlled the powdery mildew resistance at the seedling stage. To map and tag the powdery mildew resistance gene, 143 F₂ individuals derived from a cross UR206 × UR203 were used to construct a linkage map. The resistant gene was mapped on the chromosome 7AL based on the mapped microsatellite makers. The map spanned 52.1 cM and the order of these microsatellite loci agreed well with the established microsatellite map of chromosome arm 7AL. The resistance gene was flanked by the microsatellite loci Xwmc273 and Xpsp3003, with the genetic distances of 2.2 cM and 3.8 cM, respectively. On the basis of the origin and chromosomal location of the gene, it was temporarily designated PmU.     

Mapping of ripening-related or -specific cDNA clones of tomato (Lycopersicon esculentum)

Summary Nineteen ripening-related or -specific clones from Lycopersicon esculentum were mapped via RFLP analysis using an F₂ population from the cross L. esculentum x L. pennellii and cDNA or genomic clones of known map location. The map produced using cDNA and genomic clones of known map location corresponded well with previously published maps of tomato. The number of loci detected for each ripening-related or-specific clone varied from one to seven. These loci were located on all 12 chromosomes of the tomato genome. There was no significant clustering of ripening-related or-specific genes. Regions of very low recombination were observed. The clone for polygalacturonase (TOM6) mapped to a single region on chromosome 10, the same chromosome as the nor and alc ripening mutants. To fine map this chromosome, two backcross populations were produced from the cross of L. esculentum x L. pimpenillifolium, in which the esculentum parents used were homozygous for either the alc or the nor. The coding region for polygalacturonase is functionally unlinked to either of these two ripening mutants.     

Comparative RFLP-based genetic maps of barley chromosome 5 (1H) and rye chromosome 1R

Summary A genetic map of barley chromosome 5 (1H) was constructed using DNA markers. Seventeen loci were mapped to 15 locations, and these included the known-function loci (in order from the most distal on the long arm) XAdh (alcohol dehydrogenase), XLec (homologous to wheat germ agglutinin), XHor3 (D-hordein), XPpdk (pyruvate orthophosphate dikinase), centromere, XIcal (chymotrypsin inhibitor), and 6 loci in the B- and C-hordein cluster towards the end of the short arm. The gene order on the barley map agreed closely with that of chromosome 1 of rye. Intervarietal comparisons showed that single-copy cDNA and genomic DNA probes revealed about twice the level of RFLPs found in wheat.     

High-density genetic and physical bin mapping of wheat chromosome 1D reveals that the powdery mildew resistance gene <Emphasis Type="Italic">Pm24</Emphasis> is located in a highly recombinogenic region

Genetic maps of wheat chromosome 1D consisting of 57 microsatellite marker loci were constructed using Chinese Spring (CS) × Chiyacao F₂ and the International Triticeae Mapping Initiative (ITMI) recombinant inbred lines (RILs) mapping populations. Marker order was consistent, but genetic distances of neighboring markers were different in two populations. Physical bin map of 57 microsatellite marker loci was generated by means of 10 CS 1D deletion lines. The physical bin mapping indicated that microsatellite marker loci were not randomly distributed on chromosome 1D. Nineteen of the 24 (79.2%) microsatellite markers were mapped in the distal 30% genomic region of 1DS, whereas 25 of the 33 (75.8%) markers were assigned to the distal 59% region of 1DL. The powdery mildew resistance gene Pm24, originating from the Chinese wheat landrace Chiyacao, was previously mapped in the vicinity of the centromere on the short arm of chromosome 1D. A high density genetic map of chromosome 1D was constructed, consisting of 36 markers and Pm24, with a total map length of 292.7 cM. Twelve marker loci were found to be closely linked to Pm24. Pm24 was flanked by Xgwm789 (Xgwm603) and Xbarc229 with genetic distances of 2.4 and 3.6 cM, respectively, whereas a microsatellite marker Xgwm1291 co-segregated with Pm24. The microsatellite marker Xgwm1291 was assigned to the bin 1DS5-0.70-1.00 of the chromosome arm 1DS. It could be concluded that Pm24 is located in the ‘1S0.8 gene-rich region’, a highly recombinogenic region of wheat. The results presented here would provide a start point for the map-based cloning of Pm24.     

Microcolinearity between a 2-cM region encompassing the grain protein content locus<Emphasis Type="Italic"> Gpc-6B1</Emphasis> on wheat chromosome 6B and a 350-kb region on rice chromosome 2

The conservation of the linear order (colinearity) of genetic markers along large chromosome segments in wheat and rice is well established, but less is known about the microcolinearity between both genomes at subcentimorgan distances. In this study we focused on the microcolinearity between a 2.6-cM interval flanked by markers Xcdo365 and Xucw65 on wheat chromosome 6B and rice chromosome 2. A previous study has shown that this wheat segment includes the Gpc-6B1 locus, which is responsible for large differences in grain protein content (GPC) and is the target of a positional cloning effort in our laboratories. Twenty-one recombination events between Xcdo365 and Xucw65 were found in a large segregating population (935 gametes) and used to map 17 genes selected from rice chromosome 2 in the wheat genetic map. We found a high level of colinearity between a 2.1-cM region flanked by loci Xucw75 and Xucw67 on wheat chromosome 6B and a 350-kb uninterrupted sequenced region in rice chromosome arm 2S. Colinearity between these two genomes was extended to the region proximal to Xucw67 (eight colinear RFLP markers), but was interrupted distal to Xucw75 (six non-colinear RFLP markers). Analysis of different comparative studies between rice and wheat suggests that microcolinearity is more frequently disrupted in the distal region of the wheat chromosomes. Fortunately, the region encompassing the Gpc-6B1 locus showed an excellent conservation between the two genomes, facilitating the saturation of the target region of the wheat genetic map with molecular markers. These markers were used to map the Gpc-6B1 locus into a 0.3-cM interval flanked by PCR markers Xucw79 and Xucw71, and to identify five candidate genes within the colinear 64-kb region in rice.     

Whole‐genome profiling and shotgun sequencing delivers an anchored,gene‐decorated,physical map assembly of bread wheat chromosome 6A

Bread wheat (Triticum aestivum L.) is the most important staple food crop for 35% of the world's population. International efforts are underway to facilitate an increase in wheat production, of which the International Wheat Genome Sequencing Consortium (IWGSC) plays an important role. As part of this effort, we have developed a sequence‐based physical map of wheat chromosome 6A using whole‐genome profiling (WGP^?). The bacterial artificial chromosome (BAC) contig assembly tools fingerprinted contig (fpc ) and linear topological contig (ltc ) were used and their contig assemblies were compared. A detailed investigation of the contigs structure revealed that ltc created a highly robust assembly compared with those formed by fpc . The ltc assemblies contained 1217 contigs for the short arm and 1113 contigs for the long arm, with an L₅₀ of 1 Mb. To facilitate in silico anchoring, WGP^? tags underlying BAC contigs were extended by wheat and wheat progenitor genome sequence information. Sequence data were used for in silico anchoring against genetic markers with known sequences, of which almost 79% of the physical map could be anchored. Moreover, the assigned sequence information led to the ‘decoration’ of the respective physical map with 3359 anchored genes. Thus, this robust and genetically anchored physical map will serve as a framework for the sequencing of wheat chromosome 6A, and is of immediate use for map‐based isolation of agronomically important genes/quantitative trait loci located on this chromosome.