The internal workings of a DNA polymerase clamp-loading machine.

Replicative DNA polymerases are multiprotein machines that are tethered to DNA during chain extension by sliding clamp proteins. The clamps are designed to encircle DNA completely, and they are manipulated rapidly onto DNA by the ATP-dependent activity of a clamp loader. We outline the detailed mechanism of gamma complex, a five-protein clamp loader that is part of the Escherichia coli replicase, DNA polymerase III holoenzyme. The gamma complex uses ATP to open the beta clamp and assemble it onto DNA. Surprisingly, ATP is not needed for gamma complex to crack open the beta clamp. The function of ATP is to regulate the activity of one subunit, delta, which opens the clamp simply by binding to it. The delta' subunit acts as a modulator of the interaction between delta and beta. On binding ATP, the gamma complex is activated such that the delta' subunit permits delta to bind beta and crack open the ring at one interface. The clamp loader-open clamp protein complex is now ready for an encounter with primed DNA to complete assembly of the clamp around DNA. Interaction with DNA stimulates ATP hydrolysis which ejects the gamma complex from DNA, leaving the ring to close around the duplex.     

The replicase sliding clamp dynamically accumulates behind progressing replication forks in Bacillus subtilis cells

The sliding clamp is an essential component of the replisome required for processivity of DNA synthesis and several other aspects of chromosome metabolism. However, the in vivo dynamics of the clamp are poorly understood. We have used various biochemical and cell biological methods to study the dynamics of clamp association with the replisome in Bacillus subtilis cells. We find that clamps form large assemblies on DNA, called "clamp zones." Loading depends on DnaG primase and is probably driven by Okazaki fragment initiation on the lagging strand. Unloading, which is probably regulated, only occurs after many clamps have accumulated on the DNA. On/off cycling allows chromosomal zones of about 200 accumulated clamps to follow the replisome. Since we also show that clamp zones recruit proteins bearing a clamp-binding sequence to replication foci, the results highlight the clamp as a central organizer in the structure and function of replication foci.     

Crystal structure of the cytomegalovirus DNA polymerase subunit UL44 in complex with the C terminus from the catalytic subunit. Differences in structure and function relative to unliganded UL44

The human cytomegalovirus DNA polymerase is composed of a catalytic subunit, UL54, and an accessory protein, UL44, which has a structural fold similar to that of other processivity factors, including herpes simplex virus UL42 and homotrimeric sliding clamps such as proliferating cell nuclear antigen. Several specific residues in the C-terminal region of UL54 and in the "connector loop" of UL44 are required for the association of these proteins. Here, we describe the crystal structure of residues 1-290 of UL44 in complex with a peptide from the extreme C terminus of UL54, which explains this interaction at a molecular level. The UL54 peptide binds to structural elements similar to those used by UL42 and the sliding clamps to associate with their respective binding partners. However, the details of the interaction differ from those of other processivity factor-peptide complexes. Crucial residues include a three-residue hydrophobic "plug" from the UL54 peptide and Ile(135) of UL44, which forms a critical intramolecular hydrophobic anchor for interactions between the connector loop and the peptide. As was the case for the unliganded UL44 structure, the UL44-peptide complex forms a head-to-head dimer that could potentially form a C-shaped clamp on DNA. However, the peptide-bound structure displays subtle differences in the relative orientation of the two subdomains of the protein, resulting in a more open clamp, which we predicted would affect its association with DNA. Indeed, filter binding assays revealed that peptide-bound UL44 binds DNA with higher affinity. Thus, interaction with the catalytic subunit appears to affect both the structure and function of UL44.     

Loading clamps for DNA replication and repair

Sliding clamps and clamp loaders were initially identified as DNA polymerase processivity factors. Sliding clamps are ring-shaped protein complexes that encircle and slide along duplex DNA, and clamp loaders are enzymes that load these clamps onto DNA. When bound to a sliding clamp, DNA polymerases remain tightly associated with the template being copied, but are able to translocate along DNA at rates limited by rates of nucleotide incorporation. Many different enzymes required for DNA replication and repair use sliding clamps. Clamps not only increase the processivity of these enzymes, but may also serve as an attachment point to coordinate the activities of enzymes required for a given process. Clamp loaders are members of the AAA+ family of ATPases and use energy from ATP binding and hydrolysis to catalyze the mechanical reaction of loading clamps onto DNA. Many structural and functional features of clamps and clamp loaders are conserved across all domains of life. Here, the mechanism of clamp loading is reviewed by comparing features of prokaryotic and eukaryotic clamps and clamp loaders.     

Crystal structure of DNA polymerase III β sliding clamp from Mycobacterium tuberculosis

The sliding clamp is a key component of DNA polymerase III (Pol III) required for genome replication. It is known to function with diverse DNA repair proteins and cell cycle-control proteins, making it a potential drug target. To extend our understanding of the structure/function relationship of the sliding clamp, we solved the crystal structure of the sliding clamp from Mycobacterium tuberculosis (M. tuberculosis), a human pathogen that causes most cases of tuberculosis (TB). The sliding clamp from M. tuberculosis forms a ring-shaped head-to-tail dimer with three domains per subunit. Each domain contains two α helices in the inner ring that lie against two β sheets in the outer ring. Previous studies have indicated that many Escherichia coli clamp-binding proteins have a conserved LF sequence, which is critical for binding to the hydrophobic region of the sliding clamp. Here, we analyzed the binding affinities of the M. tuberculosis sliding clamp and peptides derived from the α and δ subunits of Pol III, which indicated that the LF motif also plays an important role in the binding of the α and δ subunits to the sliding clamp of M. tuberculosis.     

Motion of a DNA sliding clamp observed by single molecule fluorescence spectroscopy

DNA sliding clamps attach to polymerases and slide along DNA to allow rapid, processive replication of DNA. These clamps contain many positively charged residues that could curtail the sliding due to attractive interactions with the negatively charged DNA. By single-molecule spectroscopy we have observed a fluorescently labeled sliding clamp (polymerase III beta subunit or beta clamp) loaded onto freely diffusing, single-stranded M13 circular DNA annealed with fluorescently labeled DNA oligomers of up to 90 bases. We find that the diffusion constant for the beta clamp diffusing along DNA is on the order of 10(-14) m(2)/s, at least 3 orders of magnitude less than that for diffusion through water alone. We also find evidence that the beta clamp remains at the 3' end in the presence of Escherichia coli single-stranded-binding protein. These results may imply that the clamp not only acts to hold the polymerase on the DNA but also prevents excessive drifting along the DNA.     

Probing DNA clamps with single-molecule force spectroscopy

Detailed mechanisms of DNA clamps in prokaryotic and eukaryotic systems were investigated by probing their mechanics with single-molecule force spectroscopy. Specifically, the mechanical forces required for the Escherichia coli and Saccharomyces cerevisiae clamp opening were measured at the single-molecule level by optical tweezers. Steered molecular dynamics simulations further examined the forces involved in DNA clamp opening from the perspective of the interface binding energies associated with the clamp opening processes. In combination with additional molecular dynamics simulations, we identified the contact networks between the clamp subunits that contribute significantly to the interface stability of the S.cerevisiae and E. coli clamps. These studies provide a vivid picture of the mechanics and energy landscape of clamp opening and reveal how the prokaryotic and eukaryotic clamps function through different mechanisms.     

The coordinated functions of the E. coli MutS and MutL proteins in mismatch repair

The Escherichia coli MutS and MutL proteins have been conserved throughout evolution, although their combined functions in mismatch repair (MMR) are poorly understood. We have used biochemical and genetic studies to ascertain a physiologically relevant mechanism for MMR. The MutS protein functions as a regional lesion sensor. ADP-bound MutS specifically recognizes a mismatch. Repetitive rounds of mismatch-provoked ADP-->ATP exchange results in the loading of multiple MutS hydrolysis-independent sliding clamps onto the adjoining duplex DNA. MutL can only associate with ATP-bound MutS sliding clamps. Interaction of the MutS-MutL sliding clamp complex with MutH triggers ATP binding by MutL that enhances the endonuclease activity of MutH. Additionally, MutL promotes ATP binding-independent turnover of idle MutS sliding clamps. These results support a model of MMR that relies on two dynamic and redundant ATP-regulated molecular switches.     

Dual functions, clamp opening and primer-template recognition, define a key clamp loader subunit

Clamp loader proteins catalyze assembly of circular sliding clamps on DNA to enable processive DNA replication. During the reaction, the clamp loader binds primer-template DNA and positions it in the center of a clamp to form a topological link between the two. Clamp loaders are multi-protein complexes, such as the five protein Escherichia coli, Saccharomyces cerevisiae, and human clamp loaders, and the two protein Pyrococcus furiosus and Methanobacterium thermoautotrophicum clamp loaders, and thus far the site(s) responsible for binding and selecting primer-template DNA as the target for clamp assembly remain unknown. To address this issue, we analyzed the interaction between the E.coli gamma complex clamp loader and DNA using UV-induced protein-DNA cross-linking and mass spectrometry. The results show that the delta subunit in the gamma complex makes close contact with the primer-template junction. Tryptophan 279 in the delta C-terminal domain lies near the 3'-OH primer end and may play a key role in primer-template recognition. Previous studies have shown that delta also binds and opens the beta clamp (hydrophobic residues in the N-terminal domain of delta contact beta. The clamp-binding and DNA-binding sites on delta appear positioned for facile entry of primer-template into the center of the clamp and exit of the template strand from the complex. A similar analysis of the S.cerevisiae RFC complex suggests that the dual functionality observed for delta in the gamma complex may be true also for clamp loaders from other organisms.     

E. coli DNA replication in the absence of free β clamps

During DNA replication, repetitive synthesis of discrete Okazaki fragments requires mechanisms that guarantee DNA polymerase, clamp, and primase proteins are present for every cycle. In Escherichia coli, this process proceeds through transfer of the lagging-strand polymerase from the β sliding clamp left at a completed Okazaki fragment to a clamp assembled on a new RNA primer. These lagging-strand clamps are thought to be bound by the replisome from solution and loaded a new for every fragment. Here, we discuss a surprising, alternative lagging-strand synthesis mechanism: efficient replication in the absence of any clamps other than those assembled with the replisome. Using single-molecule experiments, we show that replication complexes pre-assembled on DNA support synthesis of multiple Okazaki fragments in the absence of excess β clamps. The processivity of these replisomes, but not the number of synthesized Okazaki fragments, is dependent on the frequency of RNA-primer synthesis. These results broaden our understanding of lagging-strand synthesis and emphasize the stability of the replisome to continue synthesis without new clamps.     

The Escherichia coli clamp loader can actively pry open the β-sliding clamp

Clamp loaders load ring-shaped sliding clamps onto DNA. Once loaded onto DNA, sliding clamps bind to DNA polymerases to increase the processivity of DNA synthesis. To load clamps onto DNA, an open clamp loader-clamp complex must form. An unresolved question is whether clamp loaders capture clamps that have transiently opened or whether clamp loaders bind closed clamps and actively open clamps. A simple fluorescence-based clamp opening assay was developed to address this question and to determine how ATP binding contributes to clamp opening. A direct comparison of real time binding and opening reactions revealed that the Escherichia coli γ complex binds β first and then opens the clamp. Mutation of conserved "arginine fingers" in the γ complex that interact with bound ATP decreased clamp opening activity showing that arginine fingers make an important contribution to the ATP-induced conformational changes that allow the clamp loader to pry open the clamp.     

Regulation of Interactions with Sliding Clamps During DNA Replication and Repair

The molecular machines that replicate the genome consist of many interacting components. Essential to the organization of the replication machinery are ring-shaped proteins, like PCNA (Proliferating Cell Nuclear Antigen) or the β- clamp, collectively named sliding clamps. They encircle the DNA molecule and slide on it freely and bidirectionally. Sliding clamps are typically associated to DNA polymerases and provide these enzymes with the processivity required to synthesize large chromosomes. Additionally, they interact with a large array of proteins that perform enzymatic reactions on DNA, targeting and orchestrating their functions. In recent years there have been a large number of studies that have analyzed the structural details of how sliding clamps interact with their ligands. However, much remains to be learned in relation to how these interactions are regulated to occur coordinately and sequentially. Since sliding clamps participate in reactions in which many different enzymes bind and then release from the clamp in an orchestrated way, it is critical to analyze how these changes in affinity take place. In this review I focus the attention on the mechanisms by which various types of enzymes interact with sliding clamps and what is known about the regulation of this binding. Especially I describe emerging paradigms on how enzymes switch places on sliding clamps during DNA replication and repair of prokaryotic and eukaryotic genomes.     

Competitive processivity-clamp usage by DNA polymerases during DNA replication and repair

Protein clamps are ubiquitous and essential components of DNA metabolic machineries, where they serve as mobile platforms that interact with a large variety of proteins. In this report we identify residues that are required for binding of the beta-clamp to DNA polymerase III of Escherichia coli, a polymerase of the Pol C family. We show that the alpha polymerase subunit of DNA polymerase III interacts with the beta-clamp via its extreme seven C-terminal residues, some of which are conserved. Moreover, interaction of Pol III with the clamp takes place at the same site as that of the delta-subunit of the clamp loader, providing the basis for a switch between the clamp loading machinery and the polymerase itself. Escherichia coli DNA polymerases I, II, IV and V (UmuC) interact with beta at the same site. Given the limited amounts of clamps in the cell, these results suggest that clamp binding may be competitive and regulated, and that the different polymerases may use the same clamp sequentially during replication and repair.     

Linear diffusion on DNA despite high-affinity binding by a DNA polymerase processivity factor.

The oligomeric "sliding clamp" processivity factors, such as PCNA, are thought to rely on a loose, topological association with DNA to slide freely along dsDNA. Unlike PCNA, the processivity subunit of the herpes simplex virus DNA polymerase, UL42, is a monomer and has an intrinsic affinity for dsDNA that is remarkably high for a sequence-independent DNA binding protein. Using a DNase footprinting assay, we demonstrate that UL42 translocates with the catalytic subunit of the polymerase during chain elongation. In addition, footprinting and electrophoretic mobility shift assays show that, despite its tight DNA binding, UL42 is capable of linear diffusion on DNA at a rate of between 17 and 47 bp/s. Our results thus suggest that, despite profound biochemical differences with the sliding clamps, UL42 can freely slide downstream with the catalytic subunit during DNA replication.     

Replication Clamps and Clamp Loaders

To achieve the high degree of processivity required for DNA replication, DNA polymerases associate with ring-shaped sliding clamps that encircle the template DNA and slide freely along it. The closed circular structure of sliding clamps necessitates an enzyme-catalyzed mechanism, which not only opens them for assembly and closes them around DNA, but specifically targets them to sites where DNA synthesis is initiated and orients them correctly for replication. Such a feat is performed by multisubunit complexes known as clamp loaders, which use ATP to open sliding clamp rings and place them around the 3′ end of primer–template (PT) junctions. Here we discuss the structure and composition of sliding clamps and clamp loaders from the three domains of life as well as T4 bacteriophage, and provide our current understanding of the clamp-loading process.During each round of DNA replication, thousands to billions of nucleotides must be faithfully copied in a short period of time. However, by themselves, replicative DNA polymerases are distributive, synthesizing only ten or so nucleotides of complementary DNA before dissociating. To achieve the high degree of processivity required for efficient DNA replication, replicative DNA polymerases associate with ring-shaped sliding clamps that encircle the template DNA and slide freely along it. Such an association effectively tethers the polymerase to DNA, substantially increasing the amount of continuous replication. The closed circular structure of sliding clamps necessitates an enzyme-catalyzed mechanism, which not only opens them for assembly and closes them around DNA, but specifically targets them to sites where DNA synthesis is initiated and orients them correctly for interaction with DNA polymerases. Such a feat is performed by multisubunit complexes known as clamp loaders, which use ATP to open sliding clamp rings and place them around the 3′ end of primer–template (PT) junctions. Here we discuss the structure and composition of sliding clamps and clamp loaders from the three domains of life as well as T4 bacteriophage, and provide our current understanding of the clamp-loading process.     

The cytomegalovirus DNA polymerase subunit UL44 forms a C clamp-shaped dimer

The human cytomegalovirus DNA polymerase consists of a catalytic subunit, UL54, and a presumed processivity factor, UL44. We have solved the crystal structure of residues 1-290 of UL44 to 1.85 A resolution by multiwavelength anomalous dispersion. The structure reveals a dimer of UL44 in the shape of a C clamp. Each monomer of UL44 shares its overall fold with other processivity factors, including herpes simplex virus UL42, which is a monomer that binds DNA directly, and the sliding clamp, PCNA, which is a trimer that surrounds DNA, although these proteins share no obvious sequence homology. Analytical ultracentrifugation and gel filtration measurements demonstrated that UL44 also forms a dimer in solution, and substitution of large hydrophobic residues along the homodimer interface with alanine disrupted dimerization and decreased DNA binding. UL44 represents a hybrid processivity factor as it binds DNA directly like UL42, but forms a C clamp that may surround DNA like PCNA.     

Crystal structure of a DNA polymerase sliding clamp from a Gram-positive bacterium

Background  

Sliding DNA clamps are processivity factors that are required for efficient DNA replication. DNA polymerases maintain proximity to nucleic acid templates by interacting with sliding clamps that encircle DNA and thereby link the polymerase enzyme to the DNA substrate. Although the structures of sliding clamps from Gram-negative bacteria (E. coli), eukaryotes, archaea, and T4-like bacteriophages are well-known, the structure of a sliding clamp from Gram-positive bacteria has not been reported previously.     

Opening pathways of the DNA clamps proliferating cell nuclear antigen and Rad9-Rad1-Hus1

Proliferating cell nuclear antigen and the checkpoint clamp Rad9-Rad1-Hus1 topologically encircle DNA and act as mobile platforms in the recruitment of proteins involved in DNA damage response and cell cycle regulation. To fulfill these vital cellular functions, both clamps need to be opened and loaded onto DNA by a clamp loader complex—a process, which involves disruption of the DNA clamp’s subunit interfaces. Herein, we compare the relative stabilities of the interfaces using the molecular mechanics Poisson−Boltzmann solvent accessible surface method. We identify the Rad9-Rad1 interface as the weakest and, therefore, most likely to open during clamp loading. We also delineate the dominant interface disruption pathways under external forces in multiple-trajectory steered molecular dynamics runs. We show that, similar to the case of protein folding, clamp opening may not proceed through a single interface breakdown mechanism. Instead, we identify an ensemble of opening pathways, some more prevalent than others, characterized by specific groups of contacts that differentially stabilize the regions of the interface and determine the spatial and temporal patterns of breakdown. In Rad9-Rad1-Hus1, the Rad9-Rad1 and Rad9-Hus1 interfaces share the same dominant unzipping pathway, whereas the Hus1-Rad1 interface is disrupted concertedly with no preferred directionality.     

Dynamics of loading the Escherichia coli DNA polymerase processivity clamp

Sliding clamps and clamp loaders are processivity factors required for efficient DNA replication. Sliding clamps are ring-shaped complexes that tether DNA polymerases to DNA to increase the processivity of synthesis. Clamp loaders assemble these ring-shaped clamps onto DNA in an ATP-dependent reaction. The overall process of clamp loading is dynamic in that protein-protein and protein-DNA interactions must actively change in a coordinated fashion to complete the mechanical clamp-loading reaction cycle. The clamp loader must initially have a high affinity for both the clamp and DNA to bring these macromolecules together, but then must release the clamp on DNA for synthesis to begin. Evidence is presented for a mechanism in which the clamp-loading reaction comprises a series of binding reactions to ATP, the clamp, DNA, and ADP, each of which promotes some change in the conformation of the clamp loader that alters interactions with the next component of the pathway. These changes in interactions must be rapid enough to allow the clamp loader to keep pace with replication fork movement. This review focuses on the measurement of dynamic and transient interactions required to assemble the Escherichia coli sliding clamp on DNA.