Crystal Structure of the Cmr2–Cmr3 Subcomplex in the CRISPR–Cas RNA Silencing Effector Complex

Clustered, regularly interspaced, short palindromic repeat (CRISPR) loci found in prokaryotes are transcribed to produce CRISPR RNAs (crRNAs) that, together with CRISPR-associated (Cas) proteins, target and degrade invading genetic materials. Cmr proteins (Cmr1–6) and crRNA form a sequence-specific RNA silencing effector complex. Here, we report the crystal structures of the Pyrococcus furiosus Cmr2–Cmr3 subcomplex bound with nucleotides (3′-AMP or ATP). The association of Cmr2 and Cmr3 forms an idiosyncratic crevasse, which binds the nucleotides. Cmr3 shares structural similarity with Cas6, which cleaves precursor crRNA for maturation, suggesting the divergent evolution of these proteins. Due to the structural resemblance, the properties of the RNA binding surface observed in Cas6 are well conserved in Cmr3, indicating the RNA binding ability of Cmr3. This surface of Cmr3 constitutes the crevasse observed in the Cmr2–Cmr3 complex. Our findings suggest that the Cmr2–Cmr3 complex uses the crevasse to bind crRNA and/or substrate RNA during the reaction.     

Crystal Structures of β-Primeverosidase in Complex with Disaccharide Amidine Inhibitors

β-Primeverosidase (PD) is a disaccharide-specific β-glycosidase in tea leaves. This enzyme is involved in aroma formation during the manufacturing process of oolong tea and black tea. PD hydrolyzes β-primeveroside (6-O-β-d-xylopyranosyl-β-d-glucopyranoside) at the β-glycosidic bond of primeverose to aglycone, and releases aromatic alcoholic volatiles of aglycones. PD only accepts primeverose as the glycone substrate, but broadly accepts various aglycones, including 2-phenylethanol, benzyl alcohol, linalool, and geraniol. We determined the crystal structure of PD complexes using highly specific disaccharide amidine inhibitors, N-β-primeverosylamidines, and revealed the architecture of the active site responsible for substrate specificity. We identified three subsites in the active site: subsite −2 specific for 6-O-β-d-xylopyranosyl, subsite −1 well conserved among β-glucosidases and specific for β-d-glucopyranosyl, and wide subsite +1 for hydrophobic aglycone. Glu-470, Ser-473, and Gln-477 act as the specific hydrogen bond donors for 6-O-β-d-xylopyranosyl in subsite −2. On the other hand, subsite +1 was a large hydrophobic cavity that accommodates various aromatic aglycones. Compared with aglycone-specific β-glucosidases of the glycoside hydrolase family 1, PD lacks the Trp crucial for aglycone recognition, and the resultant large cavity accepts aglycone and 6-O-β-d-xylopyranosyl together. PD recognizes the β-primeverosides in subsites −1 and −2 by hydrogen bonds, whereas the large subsite +1 loosely accommodates various aglycones. The glycone-specific activity of PD for broad aglycone substrates results in selective and multiple release of temporally stored alcoholic volatile aglycones of β-primeveroside.     

Molecular Mechanisms of RNA Targeting by Cas13-containing Type VI CRISPR–Cas Systems

Prokaryotic adaptive immune systems use Clustered Regularly Interspaced Short Palindromic Repeats (CRISPRs) and CRISPR-associated (Cas) proteins for RNA-guided cleavage of foreign genetic elements. The focus of this review, Type VI CRISPR–Cas systems, contain a single protein, Cas13 (formerly C2c2) that when assembled with a CRISPR RNA (crRNA) forms a crRNA-guided RNA-targeting effector complex. Type VI CRISPR–Cas systems can be divided into four subtypes (A–D) based on Cas13 phylogeny. All Cas13 proteins studied to date possess two enzymatically distinct ribonuclease activities that are required for optimal interference. One RNase is responsible for pre-crRNA processing to form mature Type VI interference complexes, while the other RNase activity provided by the two Higher Eukaryotes and Prokaryotes Nucleotide-binding (HEPN) domains, is required for degradation of target-RNA during viral interference. In this review, I will compare and contrast what is known about the molecular architecture and behavior of Type VI (A–D) CRISPR–Cas13 interference complexes, how this allows them to carry out their RNA-targeting function, how Type VI accessory proteins are able to modulate Cas13 activity, and how together all of these features have led to the rapid development of a range of RNA-targeting applications. Throughout I will also discuss some of the outstanding questions regarding Cas13's molecular behavior, and its role in bacterial adaptive immunity and RNA-targeting applications.     

Analysis of CRISPR–Cas system and antimicrobial resistance in Staphylococcus coagulans isolates

CRISPR–Cas system contributes adaptive immunity to protect the bacterial and archaeal genome against invading mobile genetic elements. In this study, an attempt was made to characterize the CRISPR–Cas system in Staphylococcus coagulans, the second most prevalent coagulase positive staphylococci causing skin infections in dogs. Out of 45 S. coagulans isolates, 42/45 (93·33%) strains contained CRISPR–Cas system and 45 confirmed CRISPR system was identified in 42 S. coagulans isolates. The length of CRISPR loci ranged from 167 to 2477 bp, and the number of spacers in each CRISPR was varied from two spacers to as high as 37 numbers. Direct repeat (DR) sequences were between 30 and 37, but most (35/45) of the DRs contained 36 sequences. The predominant S. coagulans strains 29/45 did not possess any antimicrobial resistant genes (ARG); 26/29 strains contained Type IIC CRISPR–Cas system. Three isolates from Antarctica seals neither contain CRISPR–Cas system nor ARG. Only 15/45 S. coagulans strains (33·33%) harboured at least one ARG and 13/15 of them were having mecA gene. All the methicillin susceptible S. coagulans isolates contained Type IIC CRISPR–Cas system. In contrast, many (10/13) S. coagulans isolates which were methicillin resistant had Type IIIA CRISPR–Cas system, and this Type IIIA CRISPR–Cas system was present within the SCCmec mobile genetic element. Hence, this study suggests that Type II CRISPR–Cas in S. coagulans isolates might have played a possible role in preventing acquisition of plasmid/phage invasion and Type IIIA CRISPR–Cas system may have an insignificant role in the prevention of horizontal gene transfer of antimicrobial resistance genes in S. coagulans species.     

Detection and characterization of spacer integration intermediates in type I-E CRISPR–Cas system

The adaptation against foreign nucleic acids by the CRISPR–Cas system (Clustered Regularly Interspaced Short Palindromic Repeats and CRISPR-associated proteins) depends on the insertion of foreign nucleic acid-derived sequences into the CRISPR array as novel spacers by still unknown mechanism. We identified and characterized in Escherichia coli intermediate states of spacer integration and mapped the integration site at the chromosomal CRISPR array in vivo. The results show that the insertion of new spacers occurs by site-specific nicking at both strands of the leader proximal repeat in a staggered way and is accompanied by joining of the resulting 5′-ends of the repeat strands with the 3′-ends of the incoming spacer. This concerted cleavage-ligation reaction depends on the metal-binding center of Cas1 protein and requires the presence of Cas2. By acquisition assays using plasmid-located CRISPR array with mutated repeat sequences, we demonstrate that the primary sequence of the first repeat is crucial for cleavage of the CRISPR array and the ligation of new spacer DNA.     

The Crystal and Molecular Structure of the Complex of 2′3′-Didehydro-2′3′-Dideoxyguanosine with Pyridine

Abstract

The structure of 2′,3′-didehydro-2′,3′-dideoxyguanosine was determined by X-ray crystallographic analysis of the complex with pyridine. The two independent nucleoside molecules have similar, commonly observed glycosyl link (x = -102.3° and -94.2°) and 5′-hydroxyl (y = 54.0° and 47.6°) conformations. The five-membered rings are very planar with r.m.s. deviations from planarity of less than 0.015 A. 2′,3′-Didehydro-2′,3′-dideoxyadenosine has a similar glycosyl link conformation but a different 5′-hydroxyl group orientation and a slightly less planar 5-membered ring.     

CRISPR–Cas9-assisted recombineering in Lactobacillus reuteri

Clustered regularly interspaced palindromic repeats (CRISPRs) and the CRISPR-associated (Cas) nuclease protect bacteria and archeae from foreign DNA by site-specific cleavage of incoming DNA. Type-II CRISPR–Cas systems, such as the Streptococcus pyogenes CRISPR–Cas9 system, can be adapted such that Cas9 can be guided to a user-defined site in the chromosome to introduce double-stranded breaks. Here we have developed and optimized CRISPR–Cas9 function in the lactic acid bacterium Lactobacillus reuteri ATCC PTA 6475. We established proof-of-concept showing that CRISPR–Cas9 selection combined with single-stranded DNA (ssDNA) recombineering is a realistic approach to identify at high efficiencies edited cells in a lactic acid bacterium. We show for three independent targets that subtle changes in the bacterial genome can be recovered at efficiencies ranging from 90 to 100%. By combining CRISPR–Cas9 and recombineering, we successfully applied codon saturation mutagenesis in the L. reuteri chromosome. Also, CRISPR–Cas9 selection is critical to identify low-efficiency events such as oligonucleotide-mediated chromosome deletions. This also means that CRISPR–Cas9 selection will allow identification of recombinant cells in bacteria with low recombineering efficiencies, eliminating the need for ssDNA recombineering optimization procedures. We envision that CRISPR–Cas genome editing has the potential to change the landscape of genome editing in lactic acid bacteria, and other Gram-positive bacteria.     

DNA targeting by the type I-G and type I-A CRISPR–Cas systems of Pyrococcus furiosus

CRISPR–Cas systems silence plasmids and viruses in prokaryotes. CRISPR–Cas effector complexes contain CRISPR RNAs (crRNAs) that include sequences captured from invaders and direct CRISPR-associated (Cas) proteins to destroy corresponding invader nucleic acids. Pyrococcus furiosus (Pfu) harbors three CRISPR–Cas immune systems: a Cst (Type I-G) system with an associated Cmr (Type III-B) module at one locus, and a partial Csa (Type I-A) module (lacking known invader sequence acquisition and crRNA processing genes) at another locus. The Pfu Cmr complex cleaves complementary target RNAs, and Csa systems have been shown to target DNA, while the mechanism by which Cst complexes silence invaders is unknown. In this study, we investigated the function of the Cst as well as Csa system in Pfu strains harboring a single CRISPR–Cas system. Plasmid transformation assays revealed that the Cst and Csa systems both function by DNA silencing and utilize similar flanking sequence information (PAMs) to identify invader DNA. Silencing by each system specifically requires its associated Cas3 nuclease. crRNAs from the 7 shared CRISPR loci in Pfu are processed for use by all 3 effector complexes, and Northern analysis revealed that individual effector complexes dictate the profile of mature crRNA species that is generated.     

An Experimental Tool to Estimate the Probability of a Nucleotide Presence in the Crystal Structures of the Nucleotide–Protein Complexes

A correlation between the ligand–protein affinity and the identification of the ligand in the experimental electron density maps obtained by X-ray crystallography has been tested for a number of RNA-binding proteins. Bacterial translation regulators ProQ, TRAP, Rop, and Hfq together with their archaeal homologues SmAP have been used. The equilibrium dissociation constants for the N-methyl-anthraniloyl-labelled adenosine and guanosine monophosphates titrated by the proteins have been determined by the fluorescent anisotropy measurements. The estimated stability of the nucleotide–protein complexes has been matched with a presence of the nucleotides in the structures of the proposed nucleotide–protein complexes. It has been shown that the ribonucleotides can be definitely identified in the experimental electron density maps at equilibrium dissociation constant <10 μM. At K_D of 20–40 μM, long incubation of the protein crystals in the nucleotide solution is required to obtain the structures of the complexes. The complexes with K_D value higher than 50 μM are not stable enough to survive in crystallization conditions.     

CRISPR–Cas9: A History of Its Discovery and Ethical Considerations of Its Use in Genome Editing

Biochemistry (Moscow) - The development of a method for genome editing based on CRISPR–Cas9 technology was awarded The Nobel Prize in Chemistry in 2020, less than a decade after the discovery...     

Crystal Structures of the Network-Forming Short-Arm Tips of the Laminin β1 and γ1 Chains

The heterotrimeric laminins are a defining component of basement membranes and essential for tissue formation and function in all animals. The three short arms of the cross-shaped laminin molecule are composed of one chain each and their tips mediate the formation of a polymeric network. The structural basis for laminin polymerisation is unknown. We have determined crystal structures of the short-arm tips of the mouse laminin β1 and γ1 chains, which are grossly similar to the previously determined structure of the corresponding α5 chain region. The short-arm tips consist of a laminin N-terminal (LN) domain that is attached like the head of a flower to a rod-like stem formed by tandem laminin-type epidermal growth factor-like (LE) domains. The LN domain is a β-sandwich with elaborate loop regions that differ between chains. The γ1 LN domain uniquely contains a calcium binding site. The LE domains have little regular structure and are stabilised by cysteines that are disulphide-linked 1-3, 2-4, 5-6 and 7-8 in all chains. The LN surface is not conserved across the α, β and γ chains, but within each chain subfamily there is a striking concentration of conserved residues on one face of the β-sandwich, while the opposite face invariably is shielded by glycans. We propose that the extensive conserved patches on the β and γ LN domains mediate the binding of these two chains to each other, and that the α chain LN domain subsequently binds to the composite β-γ surface. Mutations in the laminin β2 LN domain causing Pierson syndrome are likely to impair the folding of the β2 chain or its ability to form network interactions.     

Crystal Structures of the Free and Ligand-Bound FK1–FK2 Domain Segment of FKBP52 Reveal a Flexible Inter-Domain Hinge

The human Hsp90 co-chaperone FKBP52 belongs to the family of FK506-binding proteins, which act as peptidyl-prolyl isomerases. FKBP52 specifically enhances the signaling of steroid hormone receptors, modulates ion channels and regulates neuronal outgrowth dynamics. In turn, small-molecule ligands of FKBP52 have been suggested as potential neurotrophic or anti-prostate cancer agents. The usefulness of available ligands is however limited by a lack of selectivity. The immunophilin FKBP52 is composed of three domains, an FK506-binding domain with peptidyl-prolyl isomerase activity, an FKBP-like domain of unknown function and a TPR-clamp domain, which recognizes the C-terminal peptide of Hsp90 with high affinity. The herein reported crystal structures of FKBP52 reveal that the short linker connecting the FK506-binding domain and the FKBP-like domain acts as a flexible hinge. This enhanced flexibility and its modulation by phosphorylation might explain some of the functional antagonism between the closely related homologs FKBP51 and FKBP52. We further present two co-crystal structures of FKBP52 in complex with the prototypic ligand FK506 and a synthetic analog thereof. These structures revealed the molecular interactions in great detail, which enabled in-depth comparison with the corresponding complexes of the other cytosolic FKBPs, FKBP51 and FKBP12. The observed subtle differences provide crucial insights for the rational design of ligands with improved selectivity for FKBP52.     

Structural Features of β2 Adrenergic Receptor: Crystal Structures and Beyond

The beta2-adrenergic receptor (β2AR) family, which is the largest family of cell surface receptors in humans. Extra attention has been focused on the human GPCRs because they have been studied as important protein targets for pharmaceutical drug development. In fact, approximately 40% of marketed drugs directly work on GPCRs. GPCRs respond to various extracellular stimuli, such as sensory signals, neurotransmitters, chemokines, and hormones, to induce structural changes at the cytoplasmic surface, activating downstream signaling pathways, primarily through interactions with heterotrimeric G proteins or through G-protein independent pathways, such as arrestin. Most GPCRs, except for rhodhopsin, which contains covalently linked 11 cis-retinal, bind to diffusible ligands, having various conformational states between inactive and active structures. The first human GPCR structure was determined using an inverse agonist bound β2AR in 2007 and since then, more than 20 distinct GPCR structures have been solved. However, most GPCR structures were solved as inactive forms, and an agonist bound fully active structure is still hard to obtain. In a structural point of view, β2AR is relatively well studied since its fully active structure as a complex with G protein as well as several inactive structures are available. The structural comparison of inactive and active states gives an important clue in understanding the activation mechanism of β2AR. In this review, structural features of inactive and active states of β2AR, the interaction of β2AR with heterotrimeric G protein, and the comparison with β1AR will be discussed.