Detection of low numbers of pathogenic Yersinia enterocolitica in environmental water and sewage samples by nested polymerase chain reaction

Isolation of pathogenic Yersinia enterocolitica from water and sewage by traditional culture techniques is time-consuming and subsequent differentiation between pathogenic and non-pathogenic strains can be difficult and unreliable. A nested polymerase chain reaction (PCR) procedure was used for the detection of low numbers of Y. enterocolitica in spiked samples from natural surface sources with variable background flora ranging from oligotrophic water to sewage. Water and sewage samples were filtered and filters enriched overnight in a non-selective medium. Nested PCR conducted on enriched broth, prepared by use of a rapid and simple preparation step consisting of centrifugation, proteinase K treatment and boiling, enabled the detection of 8-17 cfu 100 ml-1 water with background levels of up to 8700 heterotrophic organisms ml-1 and 10,000 cfu coliform organisms 100 ml-1 water. The analysis can be completed within 2-3 d and should be a significant tool in monitoring environmental waters and drinking water sources for the presence of pathogenic Y. enterocolitica.     

Rapid detection of Salmonella in field samples by nested polymerase chain reaction

A simple and universal protocol for the rapid detection of Salmonella spp. in various samples using nested polymerase chain reaction (PCR) was developed. The protocol takes advantage of the rapid purification and concentration of Salmonella by centrifugation onto a layer of 60% sucrose solution. DNA was released by treatment with proteinase K and Triton X-100. Even without pre-enrichment, the detection limit for the nested PCR was 10(5) CFU g-1 of faeces. After pre-enrichment, it was possible to detect Salmonella in faeces where their original concentration was approximately 10(2) CFU g-1 of faeces and in meat samples, it was possible to detect Salmonella in samples where their original concentration was less than 10 cells g-1 of minced meat.     

Detection of small numbers of Campylobacter jejuni and Campylobacter coli cells in environmental water, sewage, and food samples by a seminested PCR assay

A rapid and sensitive assay was developed for detection of small numbers of Campylobacter jejuni and Campylobacter coli cells in environmental water, sewage, and food samples. Water and sewage samples were filtered, and the filters were enriched overnight in a nonselective medium. The enrichment cultures were prepared for PCR by a rapid and simple procedure consisting of centrifugation, proteinase K treatment, and boiling. A seminested PCR based on specific amplification of the intergenic sequence between the two Campylobacter flagellin genes, flaA and flaB, was performed, and the PCR products were visualized by agarose gel electrophoresis. The assay allowed us to detect 3 to 15 CFU of C. jejuni per 100 ml in water samples containing a background flora consisting of up to 8, 700 heterotrophic organisms per ml and 10,000 CFU of coliform bacteria per 100 ml. Dilution of the enriched cultures 1:10 with sterile broth prior to the PCR was sometimes necessary to obtain positive results. The assay was also conducted with food samples analyzed with or without overnight enrichment. As few as 相似文献   

Detection of Salmonella typhi by polymerase chain reaction

A rapid and sensitive method for detection of Salmonella typhi would help in preventing the spread of outbreaks and in clinical diagnosis. In order to develop unique PCR primers to detect Salm. typhi , ribosomal RNA genes from Salm. typhi (Rawlings) were cloned in pUC18. The resulting clone was confirmed by sequencing. The cloned DNA fragment contained the 5S, part of the 23S rRNA genes and the 5S-23S spacer region (EMBL/GenBank accession No. U04734).
It was expected that the 5S-23S spacer region is divergent unlike the highly conserved 23S+5S genes. This was confirmed by comparison with the rRNA gene sequences in the EMBL/GenBank database. A pair of PCR primers specific for Salm. typhi was obtained, based on this spacer region sequence. The specificity of this pair of primers was tested with 54 Salm. typhi strains (of 27 different phage types). All these Salm. typhi strains showed the positive 300 bp PCR product with this pair of primers. Six other Salmonella species as well as six other non- Salmonella bacteria were tested and none showed the 300 bp PCR product. The sensitivity of the detection level was 0·1 pg of pure Salm. typhi genomic DNA, or approximately 40 Salm. typhi cells in a spiked food sample. This pair of primers therefore has the potential for development into a diagnostic tool for the rapid diagnosis of typhoid fever.     

Detection of low numbers of bacterial cells in soils and sediments by polymerase chain reaction.

Polymerase chain reaction was used to amplify the low copy number of two 16S ribosomal gene fragments from soil and sediment extracts. Total DNA for polymerase chain reaction was extracted from 1 g of seeded or unseeded samples by a rapid freeze-and-thaw method. Amplified DNA fragments can be detected in DNA fractions isolated from seeded soil containing less than 3 Escherichia coli cells and from seeded sediments containing less than 10 cells. This research demonstrated that coupling polymerase chain reaction to direct DNA extraction improves sensitivity by 1 and 2 orders of magnitude for sediments and soils, respectively. This technique could become a powerful tool for genetic ecology studies.     

Detection of low numbers of bacterial cells in soils and sediments by polymerase chain reaction.

Polymerase chain reaction was used to amplify the low copy number of two 16S ribosomal gene fragments from soil and sediment extracts. Total DNA for polymerase chain reaction was extracted from 1 g of seeded or unseeded samples by a rapid freeze-and-thaw method. Amplified DNA fragments can be detected in DNA fractions isolated from seeded soil containing less than 3 Escherichia coli cells and from seeded sediments containing less than 10 cells. This research demonstrated that coupling polymerase chain reaction to direct DNA extraction improves sensitivity by 1 and 2 orders of magnitude for sediments and soils, respectively. This technique could become a powerful tool for genetic ecology studies.     

Detection of Salmonella enterica in food using two-step enrichment and real-time polymerase chain reaction

Aims: A new real‐time polymerase chain reaction‐based method was developed for the detection of Salmonella enterica in food. Methods and Results: The method consisted of a novel two‐step enrichment involving overnight incubation in buffered peptone water and a 5‐h subculture in Rappaport–Vassiliadis medium, lysis of bacterial cells and a Salmonella‐specific 5′‐nuclease real‐time PCR with an exogenous internal amplification control. Because a two‐step enrichment was used, the detection limit for dead S. enterica cells in artificially contaminated ice cream and salami samples was high at 10⁷ CFU (25 g)^?1, eliminating potential false‐positive results. When the method was evaluated with a range of 100 naturally contaminated food samples, three positive samples were detected by both the real‐time PCR‐based method and by the standard microbiological method, according to EN ISO 6579. When the real‐time PCR‐based method was evaluated alongside the standard microbiological method according to EN ISO 6579 with 36 food samples artificially contaminated at a level of 10⁰ CFU (25 g)^?1, identical results were obtained from both methods. Conclusions: The real‐time PCR‐based method involving a two‐step enrichment produced equivalent results to EN ISO 6579 on the day after sample receipt. Significance and Impact of the Study: The developed method is suitable for rapid detection of S. enterica in food.     

Development of a combined selective enrichment method and polymerase chain reaction (PCR) assay for sensitive detection of Salmonella in food samples

PCR assays were formatted using primer pairs homologous to phoE and invA genes. The amplification conditions were optimized with pure cultures and reactions were carried out to define selectivity, specificity and sensitivity of both primer pairs. The performance of the invA primer pair was better than that of the phoE pair, making the specific detection of Salmonella serovars and strains isolated from different food samples possible. Using the invA primer pair, the combined selective enrichment method with the polymerase chain reaction assay was established and used to detect Salmonella from artificially multi-contaminated food samples. The complete procedure detected as few as three cells of Salmonella (3 c.f.u.) from milk and meat samples.     

Detection of Escherichia coli in sewage and sludge by polymerase chain reaction.

A method in which the polymerase chain reaction (PCR) was used was developed to amplify either a uidA gene fragment or a 16S rRNA gene fragment from Escherichia coli in sewage and sludge. Because of interference caused by humic acidlike substances, crude DNA extracts were purified with a Sephadex G-200 spun column before the PCR was begun. A Southern analysis in which a nonradioactive chemiluminescent method was used was performed to confirm the presence of PCR products. The sensitivity of detection for PCR products when the chemiluminescent method was used was determined to be 30 ag of E. coli genomic DNA template. In seeded sludge, the PCR amplified the target DNA from 80 E. coli cells per g of sludge and 50 Shigella dysenteriae cells per g of sludge. Because only 0.05 aliquot of a sludge extract was used for the PCR, we deduced that the PCR detected target DNA equivalent to the DNA of 2.5 to 4 cells in the extract. The PCR amplified the uidA fragment from diluted sewage influents and effluents containing E. coli cells. Therefore, the PCR performed with a chemiluminescent gene probe can be used to detect the presence of potentially pathogenic microorganisms in sewage and sludge. This technique can be expanded to permit direct detection of pathogenic microorganisms in water samples, thus leading to enhanced public health protection.     

Detection and typing of BKV,JCV, and SV40 by multiplex nested polymerase chain reaction

A multiplex nested polymerase chain reaction (PCR) method was developed for detecting and differentiating simultaneously the DNA of polyomaviruses JC, BK, and SV40 in a single tube. In the first amplification step the same set of primers was used to amplify a conserved DNA region of the large T antigen gene of JCV, BKV, and SV40. The second round was carried out using a set of primers designed to obtain products of different size for each related virus. Subsequently, the sensitivity of the multiplex nested PCR was maximized by optimizing parameters such as primer, magnesium, and dNTP concentrations. The sensitivity of the method ranged between 1 and 10 copies of the polyomavirus genome. The assay was then used for detecting polyomavirus DNA in urine, serum, and biopsy specimens from renal transplant recipients. Based on the results obtained, the multiplex nested PCR developed in our study represents a useful tool for supporting the diagnosis of polyomavirus infection and could be used for epidemiological purposes and to better define the role of polyomaviruses in human pathology.     

Detection of cryptosporidia and Cryptosporidium parvum oocysts in environmental water samples by immunomagnetic separation-polymerase chain reaction

Cryptosporidium parvum has emerged as one of the most important new contaminants found in drinking water. Current protocols for the detection of cryptosporidia are time-consuming and rather inefficient. We recently described an immunomagnetic separation-polymerase chain reaction (IMS-PCR) assay permitting highly sensitive detection of C. parvum oocysts in drinking water samples. In this study, a second IMS-PCR assay to detect all cryptosporidial oocysts was developed, and both IMS-PCR assays were optimized on river water samples. A comparative study of the two IMS-PCR assays and the classical detection method based on an immunofluorescence assay (IFA) was carried out on 50 environmental samples. Whatever the type of water sample, the discrepancy in C. parvum detection between the IFA and IMS-PCR took the form of IFA-negative/IMS-PCR-positive results, and was caused mainly by the greater sensitivity of IMS-PCR as compared with IFA. Of the 50 water samples, only five tested positive for C. parvum using IMS-PCR, and could constitute a threat to human health. These results show that both IMS-PCR assays provide a rapid (1 d) and sensitive means of screening environmental water samples for the presence of cryptosporidia and C. parvum oocysts.     

Molecular beacons: a real-time polymerase chain reaction assay for detecting Salmonella

Molecular beacons are oligonucleotide probes that become fluorescent upon hybridization. We developed a real-time PCR assay to detect the presence of Salmonella species using these fluorogenic reporter molecules. A 122-base-pair section of the himA was used as the amplification target. Molecular beacons were designed to recognize a 16-base-pair region on the amplicon. As few as 2 colony-forming unit (CFU) per PCR reaction could be detected. We also demonstrated the ability of the molecular beacons to discriminate between amplicons obtained from similar species such as Escherichia coli and Citrobacter freundii in real-time PCR assays. These assays could be carried out entirely in sealed PCR tubes, enabling fast and direct detection of Salmonella in a semiautomated format.     

Detection of Legionella species in sewage and ocean water by polymerase chain reaction, direct fluorescent-antibody, and plate culture methods.

Legionella spp. are ubiquitous in most environmental water sources; however, sewage treatment plants have not been examined as potential environmental reservoirs for these bacteria. This study used polymerase chain reaction, direct fluorescent-antibody staining, and culture methods to examine raw and treated sewage, ocean-receiving waters, and nearshore coastal environments for the presence of Legionella pneumophila and other Legionella spp. The study concluded that Legionella spp. are present in all phases of sewage treatment and that population numbers do not significantly decline through the treatment process. Ocean-receiving waters located 5 miles offshore, where the treated sewage is discharged, were found to contain Legionella spp., but ocean water between the discharge site and coastal bathing beaches was negative. This suggests that the Legionella spp. from the ocean discharge site were not reaching the nearshore beach waters. A flood control channel and river that entered the ocean were found to contain Legionella spp., and a nearby beach swimming area was also found to be positive, suggesting that land runoff from the flood control channel and river were the source of the Legionella spp. in the beach water samples that tested positive.     

Detection of multidrug-resistant Salmonella typhimurium DT104 by multiplex polymerase chain reaction

Salmonella typhimurium definitive type 104 (DT104) is a virulent pathogen for humans and animals with many strains having multiple drug resistance characteristics. The organism typically carries resistance to ampicillin, chloramphenicol, florfenicol, streptomycin, sulfonamides, and tetracycline (ACSSuT-resistant). A multiplex PCR method was developed to simultaneously amplify four genes, florfenicol (flo(st)), virulence (spvC), invasion (invA), and integron (int) from S. typhimurium DT104 (ACSSuT-type). Twenty-two ACSSuT-resistant DT104 isolates in our collection gave 100% positive reactions to this PCR assay by amplifying 584-, 392-, 321- and 265-bp PCR products, using primers specific to the respective target genes. One Salmonella strain DT23, ACSSuT-resistant, phage type 711 failed to amplify the 584-bp fragment, indicating that this method is specific for DT104-type ACSSuT-resistant S. typhimurium strains. One clinical and one bovine ASSuT-resistant strains that were sensitive to chloramphenicol and florfenicol did not yield a 584-bp fragment, indicating the absence of the flo(st) gene. This method will be useful for rapid identification of ACSSuT-type DT104 strains from clinical, food and environmental samples.     

Detection of Coxiella burnetii specific DNA in blood samples from Japanese patients with chronic nonspecific symptoms by nested polymerase chain reaction

Sprague Dawley rats, previously infected with Phase-I Bordetella pertussis , developed more severe abnormal respiratory sounds than normal animals, but not coughing, when exposed to aerosolized capsaicin, one of several cough-inducing agents tested. Stethoscope examination suggested that greater production of pulmonary mucus might be occurring after capsaicin challenge of the infected animals, compared to the uninfected controls. Rats of three other strains gave characteristically different responses from the Sprague Dawleys. The administration of capsaicin to B. pertussis -infected rats may provide useful insights into the pathophysiology of excess mucus secretion in human pertussis.     

Clonorchis sinensis: development and evaluation of a nested polymerase chain reaction (PCR) assay

Clonorchis sinensis is a fish-borne trematode endemic to East Asia, which infects over 35 million people globally. In the study described here, we developed a nested polymerase chain reaction (PCR) method for the specific and reliable detection of C. sinensis. The primers designed from the nucleotide sequence data derived in this study were evaluated for their specificity and sensitivity for the detection of C. sinensis. The specific amplification products were obtained only with C. sinensis and no amplifications occurred with the DNA of closely related trematodes including Opisthorchis viverrini demonstrating the specificity of the assay. The novel PCR method described here will be useful for the quarantine of fishery products and evaluation of transmission status of clonorchiasis in the endemic areas.     

Detection of Xylella fastidiosa in potential insect vectors by immunomagnetic separation and nested polymerase chain reaction

A sensitive and specific assay for detecting Xylella fastidiosa in potential insect vectors was developed. This assay involves immunomagnetic separation of the bacteria from the insect, followed by a two-step, nested polymerase chain reaction (PCR) amplification using previously developed oligonucleotide primers specific to X. fastidiosa . A total of 347 leafhoppers representing 16 species were captured and sampled from American elm ( Ulmus americana L.) trees growing in a nursery where bacterial leaf scorch caused by X. fastidiosa occurs. Two of these leafhopper species, Graphocephala coccinea and G. versuta , regularly tested positive for X. fastidiosa using this technique. These insects are therefore potential vectors of X. fastidiosa . Using immunocapture and nested PCR, it was possible to detect as few as five bacteria per sample.     

Analysis of specific bacteria from environmental samples using a quantitative polymerase chain reaction

This article describes the use of quantitative PCR for measuring bacterial abundance in environmental samples. The two approaches discussed are: 1) The use of an internal PCR standard constructed to be the same size and have the same sequence as the primary amplification target, but differing from the primary target by 2-3 bases, corresponding to a unique restriction site. This allows the amount of target amplicon to be compared with the internal standard and circumvents the problem of differential amplification efficiencies when using dissimilar targets and standard amplicons. 2) The use of Taqman technology (Applied Biosystems, Foster City, California) with a dual labeled oligonucleotide probe which binds internal to the PCR primers. The detection of Bacteroides is used as an example for both approaches.