Chelating derivatives of chitosan obtained by reaction with ascorbic acid

Ascorbic acid immediately dissolves Euphausia superba chitosan upon mixing and forms chitosan ascorbate; during the 6-h period after dissolution in water at pH 5–7, ascorbate is oxidized to dehydroascorbate which undergoes Schiff reaction with the amino groups of chitosan, thus yielding a viscous solution of a polymeric ketimine. The latter is characterized by infrared spectrometry, circular dichroism spectropolarimetry, viscometry and alkalimetry. When brought into contact with transition metal ions, the chitosan ascorbate ketimine yields insoluble metal chelates. Upon reduction with sodium cyanoborohydride, the water-insoluble N-[2-(1,2-dihydroxyethyl)tetrahydrofuryl] chitosan (NDTC) is obtained, which shows enhanced capacity for uranium, up to 800 mg U/g from solutions at pH 4·5.     

Radionuclides in plants growing on sludge and water from uranium mine water treatment

Chemical treatment of uranium mine acid drainage generates sludge containing high radioactivity levels with, for example, ²³⁸U and ²²⁶Ra concentrations at about 18 and 9 kBq kg⁻¹ dry weight, respectively. Spontaneous vegetation, such as grass (Polygonum sp.), reeds (Phragmites australis), and bullrush (Typha latifolia) growing in sludge dewatering ponds concentrated uranium and uranium daughter radionuclides. However, bullrush growing in natural wetlands by the stream receiving treated mine water discharges contained even higher radionuclide concentrations, e.g., 21 Bq kg⁻¹ dry weight of ²³⁸U, about four times higher than bullrush growing on sludge, probably because the uranium in water is more bioavailable to Typha than uranium in the chemical sludge. It is suggested that wetlands with plant species could be used as a secondary treatment to further reduce radioactivity in chemically treated uranium mine water and to improve water quality in streams receiving treated water discharges. Furthermore, it is concluded that vegetation both from sludge drying ponds and from streams receiving treated water discharges, due to the high radionuclide concentrations in the vegetation, is not suitable as cattle feeding.     

Cloning and Overexpression of Alkaline Phosphatase PhoK from Sphingomonas sp. Strain BSAR-1 for Bioprecipitation of Uranium from Alkaline Solutions

Cells of Sphingomonas sp. strain BSAR-1 constitutively expressed an alkaline phosphatase, which was also secreted in the extracellular medium. A null mutant lacking this alkaline phosphatase activity was isolated by Tn5 random mutagenesis. The corresponding gene, designated phoK, was cloned and overexpressed in Escherichia coli strain BL21(DE3). The resultant E. coli strain EK4 overexpressed cellular activity 55 times higher and secreted extracellular PhoK activity 13 times higher than did BSAR-1. The recombinant strain very rapidly precipitated >90% of input uranium in less than 2 h from alkaline solutions (pH, 9 ± 0.2) containing 0.5 to 5 mM of uranyl carbonate, compared to BSAR-1, which precipitated uranium in >7 h. In both strains BSAR-1 and EK4, precipitated uranium remained cell bound. The EK4 cells exhibited a much higher loading capacity of 3.8 g U/g dry weight in <2 h compared to only 1.5 g U/g dry weight in >7 h in BSAR-1. The data demonstrate the potential utility of genetically engineering PhoK for the bioprecipitation of uranium from alkaline solutions.     

Synthesis,characterization and antifungal activity of quaternary derivatives of chitosan on Aspergillus flavus

Two series of new chitosan derivatives were synthesized by reaction of deacetylated chitosan (CH) with propyl (CH-Propyl) and pentyl (CH-Pentyl) trimethylammonium bromides to obtain derivatives with increasing degrees of substitution (DS). The derivatives were characterized by ¹H NMR and potentiometric titration techniques and their antifungal activities on the mycelial growth of Aspergillus flavus were investigated in vitro. The antifungal activities increase with DS and the more substituted derivatives of both series, CH-Propyl and CH-Pentyl, exhibited antifungal activities respectively three and six times higher than those obtained with commercial and deacetylated chitosan. The minimum inhibitory concentrations (MIC) were evaluated at 24, 48 and 72 h by varying the polymer concentration from 0.5 to 16 g/L and the results showed that the quaternary derivatives inhibited the fungus growth at polymer concentrations four times lower than that obtained with deacetylated chitosan (CH). The chitosans modified with pentyltrimethylammonium bromide exhibited higher activity and results are discussed taking into account the degree of substitution (DS).     

Obtaining and study of monosaccharide derivatives of low-molecular-weight chitosan

The possibility of obtaining monosaccharide derivatives of low-molecular-weight chitosan with the use of the Maillard reaction was studied. Chitosan derivatives (molecular weight, 24 and 5 kDa) obtained with glucosamine, N-acetyl galactosamine, galactose, and mannose with a substitution degree of 4–14% and a yield of 60–80% were obtained. Some physicochemical and biological properties of these derivatives were studied. We showed that monosaccharide derivatives of low-molecular-weight chitosan exhibited antibacterial activity. Chitosan at a concentration of 0.01% caused 100% death of bacteria B. subtilis and E. coli. The strongest antibacterial effect was exhibited by 24-kDa derivatives: only 0.02–0.08% of cells survived. These derivatives were two orders of magnitude more effective than the 5-kDa chitosan modified with galactose.     

Upgrading the preparation of high-quality chitosan from Procambarus clarkii wastes over the traditional isolation of shrimp chitosan

Crustacean waste is one of the most severe issues, posing significant environmental and health risks. This study aims to improve managing marine waste by isolating chitosan from Procambarus clarkii by devising a new methodology, incorporating technical steps, e.g., washing, decolorization and deacetylation under a reflexive condenser and dialysis purification. A comparison was made between the prepared P. clarkii chitosan and four types of shrimp chitosans: commercial, high, low, and nano. The obtained chitosan has a low molecular weight and viscosity compared to the commercial shrimp chitosan used in various applications. P. clarkii chitosan was prepared in high quality from a cheap source, as its color and quality were better than those of the commercial shrimp chitosan. The new methodology has successfully extracted chitosan from P. clarkii in a good quality and high purity, achieving 89% deacetylation, high solubility, high purity, and medium molecular weight. Analysis of the different chitosan samples with Fourier transform infrared spectroscopy (FTIR), atomic force microscopy, Raman spectrum referred indicated high similarity between the chitosan different types, regardless of its source. The 3D image of P. clarkii showed the distance between the highest and most profound points of extracted chitosan is 728.94 nm, revealing homogeneous, smooth surfaces, apparently free of pores and cracks. FTIR and Raman spectrum of P. clarkii indicated various functional groups, e.g., alcohol, amines, amides, and phenols. These active groups are responsible for about 60% of the antioxidant activity of that product. Evaluating the quality traits indicated the excellence of the chitosan prepared from P. clarkii, especially in color, viscosity, and antioxidant activity, nominating it for different food applications.     

Antifungal action of chitosan in combination with fungicides in vitro and chitosan conjugate with gallic acid on tomatoes against Botrytis cinerea

In the present work, a positive effect was obtained by using low molecular weight chitosan compounds in combination with synthetic fungicides. Antifungal activity against Botrytis cinerea, determined by the radial growth method, was more than 75%, with a 25?×?10^??10 g/L concentration of fludioxonil or difenoconazole in compounds. Metabolic activity of B. cinerea fungus was about 15% when using a chitosan compound containing fludioxonil at a concentration of 25?×?10^??7 g/L. The combined action of chitosan with difenoconazole at a fungicide concentration of 25?×?10^??4 g/L is 2–3 times more effective than the action of each component separately. Results of studies for artificially inoculated B. cinerea tomato fruit when treated with low molecular chitosan and chitosan conjugate with gallic acid reduced the frequency of rotting fruit by 50 and 83%, respectively. Chitosan-gallic acid conjugate were obtained from chitosans with Mw of 28 kDa (Ch28GA) was proved to be effective as a preventive treatment for 3 days and can potentially be used as a biofungicide against B. cinerea on tomatoes in the post-harvest period.

     

Assessment of uranium concentration in the drinking water and associated health risks in Eastern Haryana,India

Quantification of uranium in drinking water has great significance considering its effects on human health. Drinking water samples collected from different sources, viz., hand pumps, tube-wells, and public water supply from Sonipat and Panipat districts of Haryana, India have been analyzed for uranium and other physico-chemical parameters. Uranium concentration in water samples was measured using Pulsed LED Fluorimeter. Uranium concentration in collected water samples ranges from 9.1 to 155.1 µg/L in Sonipat district and 14.9 to 123.3 µg/L in Panipat district. It was inferred from the data that uranium concentration in some water samples was higher than WHO &; USEPA recommended limit of 30 µg/L. The mean cancer risk due to uranium in drinking water in Sonipat and Panipat districts was found to be 1.40 × 10^?4 and 1.63 × 10^?4, respectively, which is lower than the maximum permissible limit (<10^?3). Total Dissolve Salts (TDS) in water samples of some villages in Sonipat district was higher than permissible limits for drinking prescribed by WHO &; BIS.     

Regioselective Sequential Modification of Chitosan via Azide-Alkyne Click Reaction: Synthesis,Characterization, and Antimicrobial Activity of Chitosan Derivatives and Nanoparticles

Recently, the attention of researchers has been drawn toward the synthesis of chitosan derivatives and their nanoparticles with enhanced antimicrobial activities. In this study, chitosan derivatives with different azides and alkyne groups were synthesized using click chemistry, and these were further transformed into nanoparticles by using the ionotropic gelation method. A series of chitosan derivatives was successfully synthesized by regioselective modification of chitosan via an azide-alkyne click reaction. The amino moieties of chitosan were protected during derivatization by pthaloylation and subsequently unblocked at the end to restore their functionality. Nanoparticles of synthesized derivatives were fabricated by ionic gelation to form complexes of polyanionic penta-sodium tripolyphosphate (TPP) and cationic chitosan derivatives. Particle size analysis showed that nanoparticle size ranged from 181.03 ± 12.73 nm to 236.50 ± 14.32 nm and had narrow polydispersity index and positive surface charge. The derivatives and corresponding nanoparticles were evaluated in vitro for antibacterial and antifungal activities against three gram-positive and gram-negative bacteria and three fungal strains, respectively. The minimum inhibitory concentration (MIC) of all derivatives ranged from 31.3 to 250 µg/mL for bacteria and 188 to1500 µg/mL for fungi and was lower than that of native chitosan. The nanoparticles with MIC ranging from 1.56 to 25 µg/mLfor bacteria and 94 to 750 µg/mL for fungi exhibited higher activity than the chitosan derivatives. Chitosan O-(1-methylbenzene) triazolyl carbamate and chitosan O-(1-methyl phenyl sulfide) triazolyl carbamate were the most active against the tested bacterial and fungal strains. The hemolytic assay on erythrocytes and cell viability test on two different cell lines (Chinese hamster lung fibroblast cells V79 and Human hepatic cell line WRL68) demonstrated the safety; suggesting that these derivatives could be used in future medical applications. Chitosan derivatives with triazole functionality, synthesized by Huisgen 1,3-dipolar cycloaddition, and their nanoparticles showed significant enhancement in antibacterial and antifungal activities in comparison to those associated with native, non-altered chitosan.     

Biochemical and molecular characterization of a thermostable chitosanase produced by the strain Paenibacillus sp. 1794 newly isolated from compost

Chitosan raises a great interest among biotechnologists due to its potential for applications in biomedical or environmental fields. Enzymatic hydrolysis of chitosan is a recognized method allowing control of its molecular size, making possible its optimization for a given application. During the industrial hydrolysis process of chitosan, viscosity is a major problem; which can be circumvented by raising the temperature of the chitosan solution. A thermostable chitosanase is compatible with enzymatic hydrolysis at higher temperatures thus allowing chitosan to be dissolved at higher concentrations. Following an extensive micro-plate screening of microbial isolates from various batches of shrimp shells compost, the strain 1794 was characterized and shown to produce a thermostable chitosanase. The isolate was identified as a novel member of the genus Paenibacillus, based on partial 16S rDNA and rpoB gene sequences. Using the chitosanase (Csn1794) produced by this strain, a linear time course of chitosan hydrolysis has been observed for at least 6 h at 70 °C. Csn1794 was purified and its molecular weight was estimated at 40 kDa by SDS-PAGE. Optimum pH was about 4.8, the apparent K _m and the catalytic constant k_cat were 0.042 mg/ml and 7,588 min^?1, respectively. The half-life of Csn1794 at 70 °C in the presence of chitosan substrate was >20 h. The activity of chitosanase 1794 varied little with the degree of N-acetylation of chitosan. The enzyme also hydrolyzed carboxymethylcellulose but not chitin. Chitosan or cellulose-derived hexasaccharides were cleaved preferentially in a symmetrical way (“3?+?3”) but hydrolysis rate was much faster for (GlcN)₆ than (Glc)₆. Gene cloning and sequencing revealed that Csn1794 belongs to family 8 of glycoside hydrolases. The enzyme should be useful in biotechnological applications of chitosan hydrolysis, dealing with concentrated chitosan solutions at high temperatures.     

Removal and recovery of uranium (VI) from aqueous solutions by immobilized Aspergillus niger powder beads

The immobilized Aspergillus niger powder beads were obtained by entrapping nonviable A. niger powder into Ca-alginate gel. The effects of pH, contact time, initial uranium (VI) concentration and biomass dosage on the biosorption of uranium (VI) onto the beads from aqueous solutions were investigated in a batch system. Biosorption equilibrium data were agreeable with Langmuir isotherm model and the maximum biosorption capacity of the beads for uranium (VI) was estimated to be 649.4?mg/g at 30?°C. The biosorption kinetics followed the pseudo-second-order model and intraparticle diffusion equation. The variations in enthalpy (26.45?kJ/mol), entropy (0.167?kJ/mol?K) and Gibbs free energy were calculated from the experimental data. SEM and EDS analysis indicated that the beads have strong adsorption capability for uranium (VI). The adsorbed uranium (VI) on the beads could be released with HNO₃ or HCl. The results showed that the immobilized A. niger powder beads had great potential for removing and recovering uranium (VI) from aqueous solutions.     

Synthesis and characterization of chitosan-homocysteine thiolactone as a mucoadhesive polymer

Two mucoadhesive thiolated polymers were synthesized by the covalent attachment of homocysteine thiolactone (HT) to chitosan and N,N,N-trimethyl-chitosan (TM-chitosan) at various chitosan:HT ratios. The amount of thiol and disulphide groups immobilized on the chitosan influenced the polymer's mucoadhesion positively and negatively, respectively, with the optimal chitosan:HT (w/w) ratio being found to be 1:0.1. The interaction between mucin and chitosan and its three derivatives was highest for the thiolated chitosan derivatives but was pH dependent. HT-chitosan and TM-HT-chitosan, with the thiol groups of 64.15 and 32.48 μmol/g, respectively, displayed a 3.67- and 6.33-fold stronger mucoadhesive property compared to that of the unmodified chitosan at pH 1.2, but these differences were only ∼1.7-fold at pH 6.4. The swelling properties of TM-HT-chitosan and HT-chitosan were higher than that of chitosan and TM-chitosan, attaining a swelling ratio of up to 240% and 140%, respectively, at pH 1.2 within 2 h.     

New chitin,chitosan, and O-carboxymethyl chitosan sources from resting eggs of Daphnia longispina (Crustacea); with physicochemical characterization,and antimicrobial and antioxidant activities

The paper describes the isolation and characterization of chitin and chitosan from Daphnia longispina resting eggs harvested from a reservoir. Resting eggs are fertilized eggs that are encased in chitinous shells called ‘ephippia’ and which ensure the survival of the Daphnia population in adverse conditions. The chitin-content of D. longispina resting eggs was found to be 23 ～ 25% and the chitosan (having a 70 ～ 75% deacetylation degree) yield of the chitin was 76 ～ 77%. This high chitin-content indicates that D. longispina resting eggs can be exploited as a chitin source. The structure and thermal properties of chitin, extracted from D. longispina resting eggs, were characterized by employing Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy. The crystallinity of the chitin was found to be very low (48%). Physicochemicallycharacterized chitosan and the produced O-carboxymethyl chitosan were tested for their antimicrobial and antioxidant activity. It has been observed that chitosan displays antimicrobial activity against all pathogenic bacteria, whereas O-carboxymethyl chitosan only exhibits inhibition activity against L. garvieae, L. Monocytogenes ATCC 7644, Y. enterocolitica NCTC 11175 and S. aureus ATCC 25923. In a free radical scavenging activity assay, the IC₅₀ values of chitosan, O-carboxymethyl chitosan and butylated hydroxytoluene were found to be 23.01, 56.43 and 0.05, respectively. The ferric-reducing power of O-carboxymethyl chitosan (EC₅₀ = 8.30) indicated higher activity than chitosan (EC₅₀ = 10.12).     

Optimization of culture conditions and continuous production of chitosan by the fungi,Absidia coerulea

The production of chitosan from the mycelia ofAbsidia coerulea was studied to improve cell growth and chitosan productivity. Culture conditions were optimized in batch cultivation (pH 4.5 agitator speed of 250 rpm, and aeration rate of, 2 vvm) and the maximum chitosan concentration achieved was 2.3 g/L under optimized conditions. Continuous culture was carried out successfully by the formation of new growth spots under optimized conditions, with a chitosan productivity of 0.052 gL⁻¹ h⁻¹, which is the highest value to date, and was obtained at a dilution rate of 0.05 h⁻¹. Cell chitosan concentrations reached about 14% in the steady state, which is similar to that achieved in batch culture. This study shows that for the continuous culture ofAbsidia coerulea it is vital to control the medium composition.     

Influence of manufacturing variables on the characteristics and effectiveness of chitosan products. II. Coagulation of activated sludge suspensions

Chitosan samples manufactured under different conditions were compared for effectiveness of coagulating an activated sludge suspension grown on vegetable canning wastes. Computer analysis of data from Buchner funnel filterability tests resulted in quadratic polynomial equations describing the response curves for volume of filtrate versus dosage, expressed as g/liter chitosan/100 g sludge suspended solids (SSS). The quotient of the filtrate volume and dosage at the inflection points of the equations obtained for 10 test samples and 1 commercial chitosan sample were compared to evaluate the response (effectiveness) per unit amount for each chitosan product. The product made by a standard procedure (deproteinated with 3% NaOH at 100°C for 1 hr, demineralized with 1N HCL at ambient temperature for 30 min, and deacetylated with 50% NaOH at 145–150°C under N₂ for 5 or 15 min) gave the best performance as a coagulating agent for this activated sludge system. Other products, including the commercial preparation, required higher dosages to achieve the same effectiveness. Products deacetylated in the presence of sir rather than nitrogen decreased waste treatment effectiveness, which approximated the trends of reduced viscosity and molecular-weight distribution. The products containing minerals were less effective than products from which minerals had been removed prior to deacetylation, but they were more effective than the enzyme treated sample and the commercial product. In general, although chitosan products obtained after 15 min deacetylation were more effective than those receiving 5 min deacetylation, effectiveness did not correlate linearly with viscosity and molecular-weight distribution trends. However, chitosan products deacetylated for 15 min did show that the higher-molecular-weight products (0.65–1.1 × 10⁶) were more effective coagulating agents for activated sludge than the manufactured product having the lowest molecular weight (0.47 × 10⁶) and the commercial reference sample (0.56 × 10⁶). Thus, higher values for molecular weight were predictive of greater effectiveness for coagulation of activated sludge suspensions.     

Study of the Protective Activity of Chitosan Hydrolyzate Against Septoria Leaf Blotch of Wheat and Brown Spot of Tobacco

Chitosan hydrolyzate containing low-molecular-weight chitosan (≤24 kDa) and its oligomers (≤1.2 kDa) has been obtained via chemical depolimerization of high-molecular-weight chitosan by nitric acid. The fractions of the obtained chitosan hydrolyzate have been characterized by high performance gel permeation chromatography and proton magnetic resonance. The test performed on detached leaves of wheat has shown that the hydrolyzate completely inhibits the development of Stagonospora nodorum, a casual agent of the septoria leaf blotch, at a concentration of 200 μg/mL. A similar test with detached tobacco leaves has shown that the hydrolyzate at a concentration of 100 μg/mL also inhibits the development of Alternaria longipes, which causes brown spot of tobacco, by 75%.     

Chitosan as a Component of Pea-Fusarium solani Interactions

Chitosan, a polymer of β-1,4-linked glucosamine residues with a strong affinity for DNA, was implicated in the pea pod-Fusarium solani interaction as an elicitor of phytoalexin production, an inhibitor of fungal growth and a chemical which can protect pea tissue from infection by F. solani f. sp. pisi. Purified Fusarium fungal cell walls can elicit phytoalexin production in pea pod tissue. Enzymes from acetone powders of pea tissue release eliciting components from the F. solani f. sp. phaseoli cell walls. Hydrochloric acid-hydrolyzed F. solani cell walls are about 20% glucosamine. The actual chitosan content of F. solani cell walls is about 1%. However, chitosan assays and histochemical observations indicate that chitosan content of F. solani spores and adjacent pea cells increases following inoculation. Dormant F. solani spores also accumulate chitosan. Concentrations of nitrous acid-cleaved chitosan as low as 0.9 microgram per milliliter and 3 micrograms per milliliter elicit phytoalexin induction and inhibit germination of F. solani macroconidia, respectively. When chitosan is applied to pea pod tissue with or prior to F. solani f. sp. pisi, the tissue is protected from infection.     

Effect of the molecular weight of chitosan on its antiviral activity in plants

The effect of the molecular weight of chitosan on its ability to suppress systemic infection of bean mild mosaic virus in bean (Phaseolus vulgaris L.) plants was studied. The enzymatic hydrolysate of low-molecular-weight chitosan was successively fractionated by ultrafiltration through membranes with decreasing pore size. In total, four chitosan fractions with a weight-average molecular weight varying from 1.2 to 40.4 kDa were obtained. It was shown that the treatments of bean plants with these fractions (chitosan concentration, 10 or 100 μg/ml) inhibited virus accumulation and systemic propagation. The degree of chitosan-induced antiviral resistance increased as the molecular weight of chitosan decreased. The monomers comprising the chitosan molecule—glucosamine and N-acetylglucosamine—exhibited no antiviral activity.     

Biosorption of uranium and thorium

Selected samples of waste microbial biomass originating from various industrial fermentation processes and biological treatment plants have been screened for biosorbent properties in conjunction with uranium and thorium in aqueous solutions. Biosorption isotherms have been used for the evaluation of biosorptive uptake capacity of the biomass which was also compared to an activated carbon and the ion exchange resin currently used in uranium production processes. Determined uranium and thorium biosorption isotherms were independent of the initial U or Th solution concentration. Solution pH affected the exhibited uptake. In general, lower biosorptive uptake was exhibited at pH 2 than at pH 4. No discernible difference in uptake was observed between pH 4 and pH 5 where the optimum pH for biosorption lies. The biomass of Rhizopus arrhizus at pH 4 exhibited the highest uranium and thorium biosorptive uptake capacity (g) in excess of 180 mg/g. At an equilibrium uranium concentration of 30 mg/liter, R. arrhizus removed approximately 2.5 and 3.3 times more uranium than the ion exchange resin and activated carbon, respectively. Under the same conditions, R. arrhizus removed 20 times more thorium than the ion exchange resin and 2.3 times more than the activated carbon. R. arrhizus also exhibited higher uptake and a generally more favorable isotherm for both uranium and thorium than all other biomass types examined.     

Effect of molecular weight of chitosan on antimicrobial properties and tissue compatibility of chitosan-impregnated bacterial cellulose films

Bacterial cellulose-chitosan (BC-C) films were developed by immersing purified BC pellicles in 1.5 ~ 2.0% (w/v) acetic acid solutions containing chitosan of varying molecular weights. Effects of different molecular weight of chitosan on physical, biological and antimicrobial properties of the composite films were investigated. The cumulative chitosan absorption capacities with M_w of 141,000, 199,000, and 263,000 were 38.43, 24.65, and 23.89 mg/cm³ of dry BC film, respectively. The cumulative release profiles of chitosan from the films strongly depended on molecular weight of chitosan and pH of solution. The order of release of chitosan from the BC-C films was dependent on molecular weight as follows: M_w 141,000 > M_w 199,000 > M_w 263,000. All BC-C films showed the antimicrobial abilities against Staphylococcus aureus and Aspergillus niger but had no inhibitory effect on the growth of Escherichia coli. The BC-C films supported for adhesion, spreading and proliferation of both human skin keratinocytes and fibroblasts. The antibacterial activity against S. aureus of the BC-C with the highest Mw chitosan (263,000) was higher than those of the others. On the other hand, the BC-C films with the lowest M_w chitosan (141,000) promoted the growth of human skin cells more than those of the others.