Preparation of biodegradable chitin/gelatin membranes with GlcNAc for tissue engineering applications

Chitin is a natural biopolymer have been used for several biomedical applications due to its biodegradability and biocompatibility. By using the calcium solvent system, chitin regenerated hydrogel (RG) was prepared by using -chitin. And also, the swelling hydrogel (SG) was prepared by using β-chitin with water. Then, both RG and SG were mixed with gelatin and N-acetyl-d-(+)-glucosamine (GlcNAc) at 120 °C for 2 h. The chitin/gelatin membranes with GlcNAc were also prepared by using RG and SG with GlcNAc. The prepared chitin/gelatin membranes with or without GlcNAc were characterized by mechanical, swelling, enzymatic degradation, thermal and growth of NIH/3T3 fibroblast cell studies. The stress and elongation of chitin/gelatin membrane with GlcNAc prepared from RG was showed higher than the chitin/gelatin membranes without GlcNAc. But, the chitin/gelatin membranes prepared from SG with GlcNAc was showed higher stress and elongation than the chitin/gelatin membranes without GlcNAc. It is due to the crosslinking effect of GlcNAc. The chitin/gelatin membranes prepared from SG showed higher swelling than the chitin/gelatin membranes prepared from RG. In contrast, the chitin/gelatin membranes prepared from RG showed higher degradation than the chitin/gelatin membranes prepared from SG. And also, these chitin/gelatin membranes are showing good growth of NIH/3T3 fibroblast cell. So these novel chitin/gelatin membranes are useful for tissue engineering applications.     

Effect of addition of water-soluble chitin on amylose film

Amylose films blended with chitosan, which were free from additives such as acid, salt, and plasticizer, were prepared by casting mixtures of an aqueous solution of an enzymatically synthesized amylose and that of water-soluble chitin (44.1% deacetylated). The presence of a small amount of chitin (less than 10%) increased significantly the permeability of gases (N2, O2, CO2, C2H4) and improved the mechanical parameters of amylose film; particularly, the elastic modulus and elongation of the blend films were larger than those of amylose or chitin films. No antibacterial activity was observed with either amylose or water-soluble chitin films. But amylose films having a small amount of chitin showed strong antibacterial action, suggesting a morphological change in water-soluble chitin on the film surface by blending with amylose molecule. These facts suggested the presence of a molecular complex of amylose and chitosan.     

Macroporous chitin affinity membranes for lysozyme separation

Macroporous chitin membranes with high, controlled porosity and good mechanical properties have been prepared using a technique developed in this laboratory based on silica particles as porogen. They were employed for the affinity separation of lysozyme. Chitin membranes (1 mm thickness) can be operated at high fluxes (>/=1.1 mL/min/cm(2)) corresponding to pressure drops >/=2 psi. Their adsorption capacity for lysozyme ( approximately 50 mg/mL membrane) is by an order of magnitude higher than that of the chitin beads employed in column separation. In a binary mixture of lysozyme and ovalbumin, the membranes showed very high selectivity towards lysozyme. The effect of some important operation parameters, such as the flow rates during loading and elution were investigated. Lysozyme of very high purity (>98%) was obtained from a mixture of lysozyme and ovalbumin, and from egg white. The results indicate that the macroporous chitin membranes can be used for the separation, purification, and recovery of lysozyme at large scale. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 610-617, 1997.     

Morphology and properties of soy protein isolate thermoplastics reinforced with chitin whiskers

Environmentally friendly thermoplastic nanocomposites were successfully developed using a colloidal suspension of chitin whiskers as a filler to reinforce soy protein isolate (SPI) plastics. The chitin whiskers, having lengths of 500 +/- 50 nm and diameters of 50 +/- 10 nm on average, were prepared from commercial chitin by acid hydrolysis. The dependence of morphology and properties on the chitin whiskers content in the range from 0 to 30 wt % for the glycerol plasticized SPI nanocomposites was investigated by dynamic mechanical thermal analysis, scanning electron microscopy, swelling experiment, and tensile testing. The results indicate that the strong interactions between fillers and between the filler and SPI matrix play an important role in reinforcing the composites without interfering with their biodegradability. The SPI/chitin whisker nanocomposites at 43% relative humidity increased in both tensile strength and Young's modulus from 3.3 MPa for the SPI sheet to 8.4 MPa and from 26 MPa for the SPI sheet to 158 MPa, respectively. Further, incorporating chitin whisker into the SPI matrix leads to an improvement in water resistance for the SPI based nanocomposites.     

Antimicrobial action of novel chitin derivative

Aminoethyl-chitin (AEC) was synthesized in an attempt to both increase solubility of chitin in water and biological activity. AEC was obtained by grafting 2-chloroethylamino hydrochloride onto chitin at C-6 position. The structure of AEC was elucidated FT-IR and (1)H NMR spectroscopy, and its antimicrobial activity was investigated using three Gram-positive and Gram-negative bacteria. The integrity of the cell membranes of the representatives E. coli and S. aureus was investigated by determining the release of intracellular components of cells. When treated with AEC, release of 260 nm absorbing materials quickly increased both E. coli and S. aureus, but absorbance value was different due to the difference in cell structures. For detailed study, outer membrane (OM) and inner membrane (IM) permeabilization assay were performed using the fluorescent probe 1-N-phenylnaphthylamine (NPN) and the release of cytoplasmic beta-galactosidase activity. The results showed that AEC rapidly increased NPN uptake and the release of cytoplasmic beta-galactosidase via increasing the permeability of OM and IM. In addition, cytotoxic effect of AEC was assessed using human lung fibroblast (MRC-5) cell line, and AEC showed less toxic against MRC-5.     

TEMPO-mediated oxidation of chitin, regenerated chitin and N-acetylated chitosan

A commercial chitin, regenerated chitin prepared from chitin solutions in 6.8% NaOH and N-acetylated chitosans with degrees of N-acetylation (DNAc) of 77–93% were subjected to oxidization in water with NaClO and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxy radical (TEMPO) and NaBr. When regenerated chitin with DNAc of 87% and N-acetylated chitosan with DNAc of 93% were used as starting materials, water-soluble β-1,4-linked poly-N-acetylglucosaminuronic acid (chitouronic acid) Na salts with degrees of polymerization of ca. 300 were obtained quantitatively within 70 min. On the other hand, the original chitin and N-acetylated chitosan with DNAc of 77% did not give water-soluble products, owing to incomplete oxidation. The high crystallinity of the original chitin brought about low reactivity, and the high C2-amino group content of the N-acetylated chitosan with DNAc of 77% led to degradations rather than the selective oxidation at the C6 hydroxyls. The obtained chitouronic acid had low viscosities in water, and clear biodegradability by soil microorganisms.     

Biomaterials based on chitin and chitosan in wound dressing applications

Wound dressing is one of the most promising medical applications for chitin and chitosan. The adhesive nature of chitin and chitosan, together with their antifungal and bactericidal character, and their permeability to oxygen, is a very important property associated with the treatment of wounds and burns. Different derivatives of chitin and chitosan have been prepared for this purpose in the form of hydrogels, fibers, membranes, scaffolds and sponges. The purpose of this review is to take a closer look on the wound dressing applications of biomaterials based on chitin, chitosan and their derivatives in various forms in detail.     

Preparation and physical properties of chitin fatty acids esters

Trifluoroacetic anhydride is an effective promoter for the preparation of chitin single- and mixed-acid esters. Complete dissolution is achieved within 30 min when powdered chitin is heated at 70 °C in a mixed solution of carboxylic acid(s) and trifluoroacetic anhydride. Chitin esters prepared are chitin acetate, chitin butyrate, chitin hexanoate and chitin octanoate, chitin co-acetate/butyrate, chitin co-acetate/hexanoate, chitin co-acetate/octanoate, chitin co-acetate/palmitate, each from a solution of the respective reactants. The products have degrees of O-acyl substitution in a range of DS 1-2 depending on the nature of acyl group, as analyzed by gas-liquid and high-pressure liquid chromatography. Acetic acid as a mutual component for the mixed-acid esters increases the total degree of substitution, and the acetyl substitution is close to the relative distribution in the reaction mixture for chitin co-acetate/butyrate. It is favored over hexanoate, octanoate, and palmitate. The parent molecules, as calculated by the composition of the chitin esters and their molecular weights by light-scattering spectroscopy, are 30 kDa for the smallest and 150-151 kDa for the largest. Films of these chitin derivatives when cast from solution are strong and flexible with limited extensibility. By dynamic mechanical analysis of the ester film, it was found that both the glass transition temperature (T_g) and the tensile modulus (E′ at 25 °C) are highest for chitin acetate (218 °C and 5.8 GPa), and lowest for chitin octanoate (182 °C and 1.5 GPa). For the other esters, these values lie between the above-cited values, where the T_g and the E′ decrease with an increase in the chain length of the acyl constituent.     

Effect of molecular weight of chitosan with the same degree of deacetylation on the thermal, mechanical, and permeability properties of the prepared membrane

Different molecular weight, 90% deacetylated chitosans were obtained by ultrasonic degradation on 90% deacetylated chitosan at 80 °C for various times.

Ninety percent deacetylated chitosan was prepared from alkali treatment of chitin that was obtained from red shrimp waste. Number average-, viscosity average- molecular weights were measured by gel permeation chromatography and the viscometric method, respectively. Degree of deacetylation was measured by the titration method. Enthalpy, maximum melting temperature, tensile strength and elongation of the membranes, flow rate of permeates and water are properties measured to elucidate the effect of molecular weight of chitosan on the above thermal, mechanical, and permeation properties, respectively of the prepared membranes. Results show tensile strength, tensile elongation, and enthalpy of the membrane prepared from high molecular weight chitosans were higher than those from low molecular weight. However, the permeability show membranes prepared from high molecular weight chitosans are lower than that from those of low molecular weight.     

Preparation,characterization, bioactive and cell attachment studies of α-chitin/gelatin composite membranes

The chitin/gelatin composite membranes were prepared by mixing of chitin hydrogel with gelatin. The prepared composite membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, enzymatic degradation and thermal studies. The XRD pattern of the chitin/gelatin composite membranes showed almost the same pattern as α-chitin. The bioactivity studies of these chitin/gelatin membranes were carried out with the simulated body fluid solution (SBF) for 7, 14 and 21 days followed by the characterization with the scanning electron microscopy (SEM) and Energy Dispersive Spectrum (EDS) studies. The SEM and EDS studies confirmed the formation of calcium phosphate layer on the surface of chitin/gelatin membranes. Biocompatibility of the chitin/gelatin membrane was assessed using human MG-63 osteoblast-like cells. After 48 h of incubation, it was found that the cells had attached and completely covered the membrane surface. Thus, the prepared chitin/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications.     

A conserved domain in arthropod cuticular proteins binds chitin

Many insect cuticular proteins include a 35-36 amino acid motif known as the R&R consensus. The extensive conservation of this region led to the suggestion that it functions to bind chitin. Provocatively, it has no sequence similarity to the well-known cysteine-containing chitin-binding domain found in chitinases and some peritrophic membrane proteins. Using fusion proteins expressed in E. coli, we show that an extended form of the R&R consensus from proteins of hard cuticles is necessary and sufficient for chitin binding. Recombinant AGCP2b, a putative cuticular protein from the mosquito Anopheles gambiae, was expressed in E. coli and the purified protein shown to bind to chitin beads. A stretch of 65 amino acids from AGCP2b, including the R&R consensus, conferred chitin binding to glutathione-S-transferase (GST). Directed mutagenesis of some conserved amino acids within this extended R&R consensus from hard cuticle eliminated chitin binding. Thus arthropods have two distinct classes of chitin binding proteins, those with the chitin-binding domain found in lectins, chitinases and peritrophic membranes (cysCBD) and those with the cuticular protein chitin-binding domain (non-cysCBD).     

Preparation of chitin nanofibril/polycaprolactone nanocomposite from a nonaqueous medium suspension

Chitin nanofibrils are prepared by treatment of commercial chitin in hydrochloric acid. It is found for the first time that the obtained chitin nanofibrils can be well dispersed in an organic solvent of 2,2,2-trifluoroethanol (TFE) due to its strong ability to form hydrogen bonds. Polycaprolactone (PCL), a water insoluble biodegradable polymer, is selected to blend with chitin nanofibrils to achieve chitin nanofibril/polycaprolactone (n-chitin/PCL) nanocomposites using TFE as a co-solvent. The results show the n-chitin/PCL nanocomposites, either in the form of solvent-cast films or electrospun fiber mats, both exhibit reinforced mechanical properties. Thus, the processing technique from a TFE suspension instead of aqueous suspensions is a good alternative to broaden the family of chitin nanofibril-based nanocomposites.     

Solution properties of chitin in alkali

The solution properties of alpha-chitin dissolved in 2.77 M NaOH are discussed. Chitin samples in the weight-average molecular weight range 0.1 x 10(6) g/mol to 1.2 x 10(6) g/mol were prepared by heterogeneous acid hydrolysis of chitin. Dilute solution properties were measured by viscometry and light scattering. From dynamic light scattering data, relative similar size distributions of the chitin samples were obtained, except for the most degraded sample, which contained aggregates. Second virial coefficients in the range 1 to 2 x 10(-3) mL.mol.g(-2) indicated that 2.77 M NaOH is a good solvent to chitin. The Mark-Houwink-Sakurada equation and the relationship between the z-average radius of gyration (Rg) and the weight-average molecular weight (Mw) were determined to be [eta] = 0.10Mw0.68 (mL.g(-1)) and Rg = 0.17Mw0.46 (nm), respectively, suggesting a random-coil structure for the chitin molecules in alkali conditions. These random-coil structures have Kuhn lengths in the range 23-26 nm.     

Culture of Vibrio cholerae in presence of shrimp and crab chitin

In the culture of Vibrio cholerae in saline water containing purified chitin prepared from fresh shrimp and crab shells, it was determined that the solubility of chitin in salin water is influenced more by the salinity than by the pH, with the optimum being pH 8·0 and salinity 15 o/oo. The stimulation of growth by freshly extracted chitins and commercially available preparations was similar. All chitin preparations stimulated growth somewhat less than did alkaline peptone broth (a commonly used culture medium). All chitin sources also stimulated the production of cholera toxin by toxigenic strains to about the same extent as did alkaline peptone broth. The strains were found to be very low toxin producers in filtered bay water alone, thus indicating the need for some nutrient source for this activity.     

Bioactive and osteoblast cell attachment studies of novel α- and β-chitin membranes for tissue-engineering applications

Chitin is a novel biopolymer and has excellent biological properties such as biodegradation in the human body and biocompatible, bioabsorable, antibacterial and wound healing activities. In this work, α- and β-chitin membranes were prepared using α- and β-chitin hydrogel. The bioactivity studies were carried out using these chitin membranes with the simulated body fluid solution (SBF) for 7, 14 and 21 days. After 7, 14 and 21 days the membranes were characterized using SEM, EDS and FT-IR. The SEM, EDS and FT-IR studies confirmed the formation of calcium phosphate layer on the surface of the both chitin membranes. These results indicate that the prepared chitin membranes were bioactive. Cell adhesion studies were also carried out using MG-63 osteoblast-like cells. The cells were adhered and spread over the membrane after 24 h of incubation. These results indicated that the chitin membranes could be used for tissue-engineering applications.     

Flexible chitin films: structural studies

Chitin gels were transformed into thin, flexible chitin films with minimal dimensional shrinkage and maximum flexibility and thickness in the range of 25-80 microm by a cold-press process. Solvent residue was removed by heating the films at 50 degrees C for 12 h, followed by rinsing in 95% ethanol. The crystallinity and mechanical properties of the flexible chitin films were found to be a function of the amount of shrinkage from the gel to the final film that was obtained. For 28-microm thick films with 30% shrinkage, transparency of up to 90% was found. X-ray diffractometry (XRD) showed that the number of diffraction peaks appearing at 2theta;=23 degrees and 2theta;=27 degrees became increasingly sharper with shrinkage. Topographical information obtained from scanning electron microscopy (SEM) and atomic force microscopy (AFM) attributed the structural morphology of the films to the formation of sub-microscopic micelles. Scanning transmission electron microscopy (STEM) showed that shrinkage resulted in coarser microstructure, affecting tensile properties, where the ductility and toughness were proportional to the amount of shrinkage. These flexible chitin films have potential as wound dressing materials.     

Formation and characterization of chitosan membranes

In this paper, hydrophilic polymer membranes based on macromolecular chitosan networks have been synthesized and characterized. The structure of the membrane has been altered in several ways during the formation to adjust the properties, particularly with regard to the elasticity, tensile strength, permeability, and surface structure. An alteration of the network structure was achieved by addition of flexibilizer, cross-linking with dialdehydes, symplex formation of the chitosan with the polyanion sulfoethyl cellulose, and the introduction of artificial pores on the micro- and nanometer scale into the chitosan matrix with silica particles or poly(ethylene glycol). The resulting network structures and morphologies of these unique membranes that combine the novel alteration techniques have been characterized in detail and correlated with molecular parameters of the chitosan as degree of deacetylation, molar mass, and charge density. Finally, we report on the impact of the new network structures on physical properties of the membranes, the water vapor and gas permeability and the tensile strength, to evaluate possible application of the membranes as a wet wound dressing material with microbial barrier function that actively assists the healing process of problematic wounds. Parts of the novel combined membrane alteration and formation techniques are now covered by the patent DE 102004047115.     

The preparation and applications of functional fibres from crab shell chitin

Novel chitin–silk fibroin fibres and chitin fibres were prepared by an environmental friendly wet-spinning method. Each aqueous solution of sodium chitin (N-acetylchitosan) salt and its blends of silk fibroin in aqueous 14% sodium hydroxide was spun through a viscose-type spinneret into an aqueous 10% sulfuric acid solution saturated with ammonium sulfate (about 43%), and the corresponding white filament was obtained. The tenacity and elongation values of the chitin–silk fibroin filament decreased with an increase of fibroin content up to 33% by weight. A scanning electron microscopy analysis revealed that both the chitin filament and the chitin–silk fibroin (67:33, w/w) filament had vertical strips with faint scale structures on their surfaces. Some applications of these staple fibres were also reported.     

Chitin biosynthesis by a fungal membrane preparation. Evidence for a transient non-crystalline state of chitin

Chitin synthase activity of membrane preparations from hyphae of Schizophyllum commune was strongly inhibited by added chitinase because chitin immediately after its synthesis was highly susceptible to chitinase. In the absence of synthesis, chitin became more resistant to chitinase with time. Chitin synthesized in the presence of the optical brightener Calcofluor White M2R was extremely susceptible to degradation by chitinase and this susceptibility was maintained for a long time. X-ray diffraction analysis of chitin synthesized in the presence of Calcofluor revealed the absence of crystallinity as long as the material was kept in wet conditions. After drying, discrete deflections characteristic for alpha-chitin appeared concomitant with a decrease in the susceptibility for chitinase. These results strongly suggest the existence of a gap between polymerization and crystallization of chitin chains.     

Antihypertensive activity of chitin derivatives

To develop angiotensin I converting enzyme (ACE) inhibitory chitin derivatives based on the properties of ACE inhibitors, chitins with different degree of deacetylation were chemically modified by grafting 2-chloroethylamino hydrochloride onto chitin at the C-6 position. Three kinds of chitin derivatives were prepared and designated as aminoethyl-chitin (AEC) with 10% degree of deacetylation, aminoethyl-chitin with 50% degree of deacetylation (AEC50), and aminoethyl-chitin with 90% degree of deacetylation (AEC90). IC50 values of three chitin derivatives on ACE were 0.064 microM (AEC), 0.038 microM (AEC50), and 0.103 microM (AEC90). The results of Dixon plots revealed that AEC50 was a competitive inhibitor, and the inhibition constant (Ki) value was 0.021 microM. In addition, the antihypertensive effect of AEC50 on spontaneously hypertensive rats (SHR) was evaluated, and the result showed that it effectively decreased systolic blood pressure (SBP) in a dose-dependent manner.