Conformations and properties of the L‐tryptophyl‐containing peptides in solution,depending on the pH—Theoretical study vs. experiments

The conformational preference and electronic properties of three L ‐tryptophyl‐containing dipeptides, i.e., glycyl‐L ‐tryptophane (H‐Gly‐Trp‐OH), L ‐alanyl‐L ‐tryptophane (H‐Ala‐Trp‐OH), and L ‐methionyl‐L ‐tryptophane (L ‐Met‐Trp‐OH) in solution depending on the pH of the media are studied both theoretically and experimentally. The effect of the protonation of the COO^? and deprotonation of the NH as well as the alkaline hydrolysis of the amide fragment in a strong basic media on the electronic spectra are discussed. Ab initio and density functional theory (DFT) methods as well as the time‐dependent DFT (TD‐DFT) method as a function of the basis set are performed with a view to obtain the geometry and electronic properties of all of the species as well as the intermediate, obtained in the alkaline hydrolysis mechanism. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 727–734, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of some soluble elastins by means of FT‐IR and 2D IR correlation spectroscopy

Fourier transform infrared (FT‐IR) spectroscopy combined with 2D correlation spectroscopy has been used to offer some information about stability and structure of some soluble elastins. Temperature has been chosen as the perturbation to monitor the infrared behavior of various soluble elastins, namely, α‐elastin p, α‐elastin, and k‐elastin. In the 3800–2700 cm^?1 region, the H‐containing groups were analyzed. The bonded hydroxyls are found to decrease prior to the NH‐related hydrogen bonds and also to the conformational reorganization of hydrocarbon chains. The transition temperatures were evaluated and they were found to agree with those obtained from DSC data. The FTIR spectra and their 2nd derivatives denote that α‐ elastins exhibited amide‐I, ‐II and ‐III bands at 1656, 1539 and 1236 cm^?1, respectively, while in k‐elastin these bands were found at 1652 cm^?1 for amide I, 1540 cm^?1 for amide II and 1248 cm^?1 for amide III. The macroscopic IR finger‐print method, which combines: general IR spectra, secondary derivative spectra, and 2D‐IR correlation spectra, is useful to discriminate different elastins. Thus using the differences of the position and intensity of the bands from “fingerprint region” of studied elastins, which include the peaks assigned to C?O, C? C groups from α‐helix, β‐turn, and the peaks assigned to the amide groups, it is possible to identify and discriminate elastins from each others. Furthermore, the pattern of 2D‐IR correlation spectra under thermal perturbation, allow their direct identification and discrimination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1072–1084, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Heating‐induced conformational change of a novel β‐(1→3)‐D‐glucan from Pleurotus geestanus

Recently, we isolated and purified a neutral polysaccharide (PGN) from edible fungus Pleurotus geestanus. Its structure was characterized by a range of physical–chemical methods, including high performance anion exchange chromatography, uronic acid, and protein analyses, size exclusion chromatography with ultraviolet, refractive index and light scattering detectors, and nuclear magnetic resonance. Our results revealed that PGN is a novel β‐(1→3)‐D ‐glucan with glucose attached to every other sugar residues at Position 6 in the backbone. It has a degree of branching of 1/2. Such structure is different from typical β‐(1→3)‐D ‐glucans schizophyllan and lentinan in which DB is 1/3 and 2/5, respectively. Rheological study showed a very interesting melting behavior of PGN in water solution: heating PGN in water leads to two transitions, in the range of 8–12.5°C and 25–60°C, respectively. The melting behavior and conformational changes were characterized by rheometry, micro‐differential scan calorimetry, atomic force microscopy, static and dynamic light scattering at different temperatures. The first heating‐induced transition corresponds to the disintegration of polymer bundles into small helical clusters, resembling the heating‐induced dissociation of SPG in water at 7°C; the second one might correspond to the dissociation of helical strands to individual chains. The ability of PGN to undergo a conformation/viscosity transition in water upon heating is very valuable to immobilize cells or enzymes or therapeutic DNA/RNA, which makes PGN a potentially useful biomaterial. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 121–131, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational evaluation of labeled C3′‐O‐P‐13CH2‐O‐C4″ phosphonate internucleotide linkage,a phosphodiester isostere

Modified internucleotide linkage featuring the C3′‐O‐P‐CH₂‐O‐C4″ phosphonate grouping as an isosteric alternative to the phosphodiester C3′‐O‐P‐O‐CH₂‐C4″ bond was studied in order to learn more on its stereochemical arrangement, which we showed earlier to be of prime importance for the properties of the respective oligonucleotide analogues. Two approaches were pursued: First, the attempt to prepare the model dinucleoside phosphonate with ¹³C‐labeled CH₂ group present in the modified internucleotide linkage that would allow for a more detailed evaluation of the linkage conformation by NMR spectroscopy. Second, the use of ab initio calculations along with molecular dynamics (MD) simulations in order to observe the most populated conformations and specify main structural elements governing the conformational preferences. To deal with the former aim, a novel synthesis of key labeled reagent (CH₃O)₂P(O)¹³CH₂OH for dimer preparation had to be elaborated using aqueous ¹³C‐formaldehyde. The results from both approaches were compared and found consistent. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 514–529, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Complex biopolymeric systems at stalk/epicuticular wax plant interfaces: A near infrared spectroscopy study of the sugarcane example

Naturally occurring macromolecules present at the epicuticular wax/stalk tissue interface of sugarcane were investigated using near infrared spectroscopy (NIRS). Investigations of water, cellulose, and wax‐cellulose interrelationships were possible using NIRS methods, where in the past many different techniques have been required. The sugarcane complex interface was used as an example of typical phenomena found at plant leaf/stalk interfaces. This detailed study showed that sugarcane cultivars exhibit spectral differences in the CH_n, water OH, and cellulose OH regions, reflecting the presence of epicuticular wax, epidermis, and ground tissue. Spectrally complex water bands (5276 cm^?1 and 7500–6000 cm^?1) were investigated via freeze‐drying experiments which revealed sequentially a complex band substructure (7500–6000 cm^?1), a developing weak H‐bonding system (～7301 cm^?1), and strong H‐bonding (～7062 cm^?1) assigned to water—cellulose interactions. Principal component analysis techniques clarified complex band trends that developed during the desorption experiment. Bands from wax‐free stalk were minimized in the 4327–4080 cm^?1 region (C? H_n vibrational modes associated with long chain fatty compounds), while bands from the stalk tissue (particularly lignin and moisture) became more pronounced. This work is a comprehensive guide to similar studies by scientists involved in a variety of plant and fiber research fields. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 642–651, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

“Setting paint” analogy for the hydrophobic self‐association of tropoelastin into elastin‐like hydrogel

Alkaline tropoelastin solutions (pH 11) were optically clear at low temperatures, but a firm gel formed when the temperature was raised to 37°C. Reversion to a clear solution took place if the temperature was lowered to below 20°C within less than 2 h, but not if 37°C was maintained for several hours. The precipitated elastin‐like hydrogel thus formed did not visually redissolve at low temperatures. Tropoelastin hydrogel was stable to subsequent washings with alkaline solution at 37°C, but at 4°C some hydrogel redissolved showing that association is at least partly reversible. Washing the hydrogel with neutral 8M urea solution at 4°C dissolved less than 10% of tropoelastin in 24 h. We characterized this phenomenon by combining temperature‐controlled light microscopy analysis, ¹H NMR spectroscopy (temperature, diffusion, and relaxation time studies), and UV‐absorption‐based concentration measurements. The self‐association of tropoelastin at pH 11 is due to hydrophobic interactions in an emulsion‐like system in which the spherules coalesce in a manner like a water‐based latex paint that forms a durable hydrophobic sheet as water and the organic solvent evaporate. In the present case, the sedimentation and entanglement of the tropoelastin porous sheets means that reverse dissolution is a kinetically slow process. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 321–330, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Characterization of a pectic polysaccharide from the leaves of Diospyros kaki and its modulating activity on lymphocyte proliferation

Pectin is a group of carbohydrate polymers constructing the primary cell walls and the middle lamella of terrestrial plants. Herein, we demonstrated the structure and immunomodulatory activity of the major pectic polysaccharide DL‐3B₂ isolated from the leaves of Diospyros kaki. Based on composition analysis, methylation analysis, two‐step acid hydrolysis, lithium‐mediated selective degradation, ¹³C NMR spectroscopy, and electrospray ionization mass spectrometry, DL‐3B₂ was found to contain an α‐1, 4‐linked galacturonic acid (GalA) backbone with some insertions of α‐1, 2‐linked rhamnose residues. The arabinan‐ and arabinogalactan‐side chains were attached to O‐4 of the rhamnose residues, whereas the linear arabinoxylan was probably linked to O‐3 of the GalA residues. Immunological tests in vitro showed that DL‐3B₂ could help stimulate lipopolysaccharide‐induced B lymphocyte proliferation, but not ConA‐induced T lymphocyte proliferation, and that the arabinose residues play a role in maintaining this immunological activity. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 649–656, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR studies of an immunomodulatory benzodiazepine binding to its molecular target on the mitochondrial F1F0‐ATPase

Bz‐423 is an inhibitor of the mitochondrial F₁F₀‐ATPase, with therapeutic properties in murine models of immune diseases. Here, we study the binding of a water‐soluble Bz‐423 analog (5‐(3‐(aminomethyl)phenyl)‐7‐chloro‐ 1‐methyl‐3‐(naphthalen‐2‐ylmethyl)‐1H‐benzo][e][1,4]diazepin‐2(3H)‐one); (1) to its target subunit on the enzyme, the oligomycin sensitivity conferring protein (OSCP), by NMR spectroscopy using chemical shift perturbation and cross‐relaxation experiments. Titration experiments with constructs representing residues 1–120 or 1–145 of the OSCP reveals that (a) 1 binds to a region of the protein, at the minimum, comprising residues M51, L56, K65, V66, K75, K77, and N92, and (b) binding of 1 induces conformational changes in the OSCP. Control experiments employing a variant of 1 in which a key binding element on the small molecule was deleted; it had no perturbational effect on the spectra of the OSCP, which indicates that the observed changes with 1 represent specific binding interactions. Collectively, these data suggest that 1 might inhibit the enzyme through an allosteric mechanism where binding results in conformational changes that perturb the OSCP‐F₁ interface resulting in disrupted communication between the peripheral stalk and the F₁‐domain of the enzyme. © 2009 Wiley Periodicals, Inc. Biopolymers 29: 85–92, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

An integrated molecular dynamics (MD) and experimental study of higher order human telomeric quadruplexes

Structural knowledge of telomeric DNA is critical for understanding telomere biology and for the utilization of telomeric DNA as a therapeutic target. Very little is known about the structure of long human DNA sequences that may form more than one quadruplex unit. Here, we report a combination of molecular dynamics simulations and experimental biophysical studies to explore the structural and dynamic properties of the human telomeric sequence (TTAGGG)₈TT that folds into two contiguous quadruplexes. Five higher order quadruplex models were built combining known single human telomeric quadruplex structures as unique building blocks. The biophysical properties of this sequence in K⁺ solution were experimentally investigated by means of analytical ultracentrifugation and UV spectroscopy. Additionally, the environments of loop adenines were probed by fluorescence studies using systematic single‐substitutions of 2‐aminopurine for the adenine bases. The comparison of the experimentally determined properties with the corresponding quantities predicted from the models allowed us to test the validity of each of the structural models. One model emerged whose properties are most consistent with the predictions, and which therefore is the most probable structure in solution. This structure features contiguous quadruplex units in an alternating hybrid‐1‐hybrid‐2 conformation with a highly ordered interface composed of loop residues from both quadruplexes © 2010 Wiley Periodicals, Inc. Biopolymers 93:533–548, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Identification of novel peptide ligands for the cancer‐specific receptor mutation EFGRvIII using a mixture‐based synthetic combinatorial library

We report here, the design and synthesis of a positional scanning synthetic combinatorial library for the identification of novel peptide ligands targeted against the cancer‐specific epidermal growth factor tyrosine kinase receptor mutation variant III (EGFRvIII). This receptor is expressed in several kinds of cancer, in particular, ovarian, glioblastomas, and breast cancer, but not in normal tissue. The library consisted of six individual positional sublibraries in the format, H‐O_1–6XXXXX‐NH₂, O being one of the 19 proteinogenic amino acids (cysteine omitted) and X an equimolar mixture of these. The library consisted of 114 mixtures in total. Using a biotin‐streptavidin assay, the binding of each sublibrary to NR6M, NR6W‐A, and NR6 cells was tested. These cells express EGFRvIII, EGFR, and neither of the receptors, respectively. The result from each sublibrary was examined to identify the most active amino acid residue at each position. On the basis of this knowledge, eight peptides were synthesized and tested for binding to EGFRvIII. We identified one peptide, H‐FALGEA‐NH₂, that showed more selective binding to the mutated receptor than the EGFRvIII specific peptide PEPHC1. This study demonstrates the value of using mixture‐based combinatorial positional scanning libraries for the identification of novel peptide ligands targeted against the cancer‐specific EGFRvIII. Our best candidate H‐FALGEA‐NH₂ will be radioactively labeled and evaluated as an imaging agent for positron emission tomography investigation for diagnosis, staging, and monitoring of therapy of various types of cancer. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 201–206, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A proposed model for dragline spider silk self‐assembly: Insights from the effect of the repetitive domain size on fiber properties

Dragline spider silk has been intensively studied for its superior qualities as a biomaterial. In previous studies, we made use of the baculovirus mediated expression system for the production of a recombinant Araneus diadematus spider silk dragline ADF4 protein and its self‐assembly into intricate fibers in host insect cells. In this study, our aim was to explore the function of the major repetitive domain of the dragline spider silk. Thus, we generated an array of synthetic proteins, each containing a different number of identical repeats up to the largest recombinantly expressed spider silk to date. Study of the self‐assembly properties of these proteins showed that depending on the increasing number of repeats they give rise to different assembly phenotypes, from a fully soluble protein to bona fide fibers with superior qualities. The different assembly forms, the corresponding chemical resistance properties obtained as well as ultrastructural studies, revealed novel insights concerning the structure and intermolecular interactions of the repetitive and nonrepetitive domains. Based on these observations and current knowledge in the field, we hereby present a comprehensive hypothetical model for the mechanism of dragline silk self‐assembly and fiber formation. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 458–468, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Higher order structure of short collagen model peptides attached to dendrimers and linear polymers

Collagen, which is used as a biomaterial, is the most abundant protein in mammals. We have previously reported that a dendrimer modified with collagen model peptides, (Gly‐Pro‐Pro)₅, formed a collagen‐like triple‐helical structure, showing thermal reversibility. In this study, various collagen‐mimic dendrimers of different generations and at different binding ratios were synthesized, to investigate the relationship between the peptide clustering effect and the higher order structure formation. The formation of the higher order structure was influenced by the binding ratios of the peptide to the dendrimer, but was not influenced by the dendrimer generation. A spacer, placed between the dendrimer terminal group and the peptide, negatively contributed to the formation of the higher order structure. The collagen model peptides were also attached to poly(allylamine) (PAA) and poly‐L ‐lysine (poly(Lys)) to compare them with the collagen‐mimic dendrimers. The PAA‐based collagen‐mimic compound, bearing more collagen model peptides than the dendrimer, exhibited a thermally stable higher order structure. In contrast, this was not observed for the collagen‐mimic polymers based on poly(Lys). Therefore, dendrimers and vinyl polymers act as a scaffold for collagen model peptides and subsequently induce higher order structures. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 640–648, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of the human cannabinoid receptor one carboxyl‐terminus identifies two amphipathic helices

Recent research has implicated the C‐terminus of G‐protein coupled receptors in key events such as receptor activation and subsequent intracellular sorting, yet obtaining structural information of the entire C‐tail has proven a formidable task. Here, a peptide corresponding to the full‐length C‐tail of the human CB1 receptor (residues 400–472) was expressed in E.coli and purified in a soluble form. Circular dichroism (CD) spectroscopy revealed that the peptide adopts an α‐helical conformation in negatively charged and zwitterionic detergents (48–51% and 36–38%, respectively), whereas it exhibited the CD signature of unordered structure at low concentration in aqueous solution. Interestingly, 27% helicity was displayed at high peptide concentration suggesting that self‐association induces helix formation in the absence of a membrane mimetic. NMR spectroscopy of the doubly labeled (¹⁵N‐ and ¹³C‐) C‐terminus in dodecylphosphocholine (DPC) identified two amphipathic α‐helical domains. The first domain, S401‐F412, corresponds to the helix 8 common to G protein‐coupled receptors while the second domain, A440‐M461, is a newly identified structural motif in the distal region of the carboxyl‐terminus of the receptor. Molecular modeling of the C‐tail in DPC indicates that both helices lie parallel to the plane of the membrane with their hydrophobic and hydrophilic faces poised for critical interactions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 565–573, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Rapid determination of antigenic epitopes in human NGAL using NMR

The recent remarkable rise in biomedical applications of antibodies and their recombinant constructs has shifted the interest in determination of antigenic epitopes in target proteins from the areas of protein science and molecular immunology to the vast fields of modern biotechnology. In this article, we demonstrated that measuring binding induced changes in two‐dimensional NMR spectra enables rapid determination of antibody binding footprints on target protein antigens. Such epitopes recognized by six high‐affinity monoclonal murine antibodies (mAbs) against human neutrophil gelatinase‐associated lipocalin (NGAL) were determined by measuring chemical shifts or broadening of peaks in ¹H‐¹⁵N‐TROSY HSQC and ¹H‐¹³C HSQC spectra of isotope‐labeled NGAL occurring upon its binding to the antibodies. Locations of the epitopes defined by the NMR studies are in good agreement with the results of antibody binding pairing observed by dual‐color fluorescence cross‐correlation spectroscopy. In all six cases, the antibodies recognize conformational epitopes in regions of relatively rigid structure on the protein. None of the antibodies interact with the more flexible funnel‐like opening of the NGAL calyx. All determined epitope areas in NGAL reflect the dimensions of respective antibody binding surface (paratopes) and contain amino acid residues that provide strong interactions. This NMR‐based approach offers comprehensive information on antigenic epitopes and can be applied to numerous protein targets of diagnostic or therapeutic interest. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 657–667, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Bioencapsulation of apomyoglobin in nanoporous organosilica sol–gel glasses: Influence of the siloxane network on the conformation and stability of a model protein

Nanoporous sol–gel glasses were used as host materials for the encapsulation of apomyoglobin, a model protein employed to probe in a rational manner the important factors that influence the protein conformation and stability in silica‐based materials. The transparent glasses were prepared from tetramethoxysilane (TMOS) and modified with a series of mono‐, di‐ and tri‐substituted alkoxysilanes, R_nSi(OCH₃)_4?n (R = methyl‐, n = 1; 2; 3) of different molar content (5, 10, 15%) to obtain the decrease of the siloxane linkage (? Si? O? Si? ). The conformation and thermal stability of apomyoglobin characterized by circular dichroism spectroscopy (CD) was related to the structure of the silica host matrix characterized by ²⁹Si MAS NMR and N₂ adsorption. We observed that the protein transits from an unfolded state in unmodified glass (TMOS) to a native‐like helical state in the organically modified glasses, but also that the secondary structure of the protein was enhanced by the decrease of the siloxane network with the methyl modification (n = 0 < n = 1 < n = 2 < n = 3; 0 < 5 < 10 < 15 mol %). In 15% trimethyl‐modified glass, the protein even reached a maximum molar helicity (?24,000 deg. cm² mol^?1) comparable to the stable folded heme‐bound holoprotein in solution. The protein conformation and stability induced by the change of its microlocal environment (surface hydration, crowding effects, microstructure of the host matrix) were discussed owing to this trend dependency. These results can have an important impact for the design of new efficient biomaterials (sensors or implanted devices) in which properly folded protein is necessary. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 895–906, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The Saccharomyces cerevisiae succinate dehydrogenase does not require heme for ubiquinone reduction

The coupling of succinate oxidation to the reduction of ubiquinone by succinate dehydrogenase (SDH) constitutes a pivotal reaction in the aerobic generation of energy. In Saccharomyces cerevisiae, SDH is a tetramer composed of a catalytic dimer comprising a flavoprotein subunit, Sdh1p and an iron-sulfur protein, Sdh2p and a heme b-containing membrane-anchoring dimer comprising the Sdh3p and Sdh4p subunits. In order to investigate the role of heme in SDH catalysis, we constructed an S. cerevisiae strain expressing a mutant enzyme lacking the two heme axial ligands, Sdh3p His-106 and Sdh4p Cys-78. The mutant enzyme was characterized for growth on a non-fermentable carbon source, for enzyme assembly, for succinate-dependent quinone reduction and for its heme b content. Replacement of both Sdh3p His-106 and Sdh4p Cys-78 with alanine residues leads to an undetectable level of cytochrome b₅₆₂. Although enzyme assembly is slightly impaired, the apocytochrome SDH retains a significant ability to reduce quinone. The enzyme has a reduced affinity for quinone and its catalytic efficiency is reduced by an order of magnitude. To better understand the effects of the mutations, we employed atomistic molecular dynamic simulations to investigate the enzyme's structure and stability in the absence of heme. Our results strongly suggest that heme is not required for electron transport from succinate to quinone nor is it necessary for assembly of the S. cerevisiae SDH.     

Vibrational spectroscopic studies of newly developed synthetic biopolymers

Vibrational spectroscopic techniques such as near‐infrared (NIR), Fourier transform infrared (FTIR), and Raman spectroscopy are valuable diagnostic tools that can be used to elucidate comprehensive structural information of numerous biological samples. In this review article, we have highlighted the advantages of nanotechnology and biophotonics in conjunction with vibrational spectroscopic techniques in order to understand the various aspects of new kind of synthetic biopolymers termed as polyethylene glycol (PEG)ylated lipids. In contrast to conventional phospholipids, these novel lipids spontaneously form liposomes or nanovesicles upon hydration, without the supply of external activation energy. The amphiphiles considered in this study differ in their hydrophobic acyl chain length and contain different units of PEG hydrophilic headgroups. We have further explored the thermotropic phase behaviors and associated changes in the conformational order/disorder of such lipids by using variable‐temperature FTIR and Raman spectroscopy. Phase transition temperature profiles and correlation between various spectral indicators have been identified by either monitoring the shifts in the vibrational peak positions or plotting vibrational peak intensity ratios in the C? H stretching region as a function of temperature. To supplement our observations of phase transformations, a thermodynamic approach known as differential scanning calorimetry (DSC) has been applied and revealed a good agreement with the infrared and Raman spectroscopic data. Finally, the investigation of thermal properties of lipids is extremely crucial for numerous purposes, thus the results obtained in this work may find application in a wide variety of studies including the development of PEGylated lipid based drug and substances delivery vehicles. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 403–417, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Oligomerization of adenosin‐5′‐O‐ylmethylphosphonate,an isopolar AMP analogue: Evaluation of the route to short oligoadenylates

In an attempt to prepare a library of short oligoadenylate analogues featuring both the enzyme‐stable internucleotide linkage and the 5′‐O‐methylphosphonate moiety and thus obtain a pool of potential RNase L agonists/antagonists, we studied the spontaneous polycondensation of the adenosin‐5′‐O‐ylmethylphosphonic acid (p_cA), an isopolar AMP analogue, and its imidazolide derivatives employing N,N′‐dicyclohexylcarbodiimide under nonaqueous conditions and uranyl ions under aqueous conditions, respectively. The RP LC–MS analyses of the reaction mixtures per se, and those obtained after the periodate treatment, along with analyses and separations by capillary zone electrophoresis, allowed us to characterize major linear and cyclic oligoadenylates obtained. The structure of selected compounds was supported, after their isolation, by NMR spectroscopy. Ab initio calculation of the model structures simulating the AMP‐imidazolide and p_cA‐imidazolide offered the explanation why the latter compound exerted, in contrast to AMP‐imidazolide, a very low stability in aqueous solutions. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 277–289, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Synthesis of quadruplex‐forming tetra‐end‐linked oligonucleotides: Effects of the linker size on quadruplex topology and stability

G‐quadruplexes are characteristic structural arrangements of guanine‐rich DNA sequences that abound in regions with relevant biological significance. These structures are highly polymorphic differing in the number and polarity of the strands, loop composition, and conformation. Furthermore, the cation species present in solution strongly influence the topology of the G‐quadruplexes. Recently, we reported the synthesis and structural studies of new G‐quadruplex forming oligodeoxynucleotides (ODNs) in which the 3′‐ and/or the 5′‐ends of four ODN strands are linked together by a non‐nucleotidic tetra‐end‐linker (TEL). These TEL‐ODN analogs having the sequence TGGGGT are able to form parallel G‐quadruplexes characterized by a remarkable high thermal stability. We report here an investigation about the influence of the reduction of the TEL size on the molecularity, topology, and stability of the resulting TEL‐G‐quadruplexes using a combination of circular dichroism (CD), CD melting, ¹H NMR spectroscopy, gel electrophoresis, and molecular modeling data. We found that all TEL‐(TGGGGT)₄ analogs, regardless the TEL size and the structural orientation of the ODN branches, formed parallel TEL‐G‐quadruplexes. The molecular modeling studies appear to be consistent with the experimental CD and NMR data revealing that the G‐quadruplexes formed by TEL‐ODNs having the longer TEL (L 1 ‐ 4 ) are more stable than the corresponding G‐quadruplexes having the shorter TEL (S 1 ‐ 4 ). The relative stability of S 1 ‐ 4 was also reported. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 466–477, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com