Luminescent probing of the simplest chiral α‐amino acid–alanine in an enantiopure and racemic state

Luminescent spectroscopy combined with the technique of luminescent probing with rare earth ions (europium, gadolinium, terbium) and an actinide ion (uranyl) was used to differentiate enantiopure and racemic alanine, the simplest chiral proteinogenic amino acid. Using the achiral luminescent probes, small differences between pure L and DL alanine in the solid state were strongly amplified. Based on the observed electronic transitions of the probes, the position of the triplet level of the coordinated alanine was estimated. Formation of homo‐ and heterochiral complexes between enantiomers of alanine and the metal ions is discussed as a possible mechanism of chiral self‐discrimination.     

Replication of single-stranded porcine circovirus DNA by DNA polymerases α and δ

Porcine circovirus is the only mammalian DNA virus so far known to contain a single-stranded circular genome (Tischer et al. (1982) Nature 295, 64–66). Replication of its small viral DNA (1.76 kb) appears to be dependent on cellular enzymes expressed during S-phase of the cell cycle (Tischer et al. (1987) Arch. Virol. 96, 39–57). In this paper we have exploited the porcine circovirus genome to probe for in vitro initiation and elongation of DNA replication by different preparations of calf thymus DNA polymerase α and δ as well as by a partially purified preparation from pig thymus. The results indicated that three different purification fractions of calf thymus DNA polymerase α and one from pig thymus initiate DNA synthesis at several sites on the porcine circovirus DNA. It appears that the sites at which DNA primase synthesizes primers are not entirely random. Subsequent DNA elongation by a highly purified DNA polymerase α holoenzyme which had been isolated by the criterion of replicating single-stranded M13 DNA (Ottiger et al. (1987) Nucleic Acids Res. 15, 4789–4807) is very efficient. Complete conversion to the double-stranded form is obtained in less than 1 min. When the DNA synthesis by DNA polymerase α is blocked with the DNA polymerase α specific monoclonal antibody SJK 132-20 after initiation by DNA primase, DNA polymerase δ can efficiently replicate from the primers. This in vitro DNA replication system may be used in analogy to the bacteriophage systems in E. coli to study initiation and elongation of DNA replication.     

TET3‐mediated DNA oxidation promotes ATR‐dependent DNA damage response

An efficient, accurate, and timely DNA damage response (DDR) is crucial for the maintenance of genome integrity. Here, we report that ten‐eleven translocation dioxygenase (TET) 3‐mediated conversion of 5‐methylcytosine (5mC) to 5‐hydroxymethylcytosine (5hmC) in response to ATR‐dependent DDR regulates DNA repair. ATR‐dependent DDR leads to dynamic changes in 5hmC levels and TET3 enzymatic activity. We show that TET3 is an ATR kinase target that oxidizes DNA during ATR‐dependent DNA damage repair. Modulation of TET3 expression and activity affects DNA damage signaling and DNA repair and consequently cell death. Our results provide novel insight into ATR‐mediated DDR, in which TET3‐mediated DNA demethylation is crucial for efficient DNA repair and maintenance of genome stability.     

14‐3‐3γ mediates Cdc25A proteolysis to block premature mitotic entry after DNA damage

14‐3‐3 proteins control various cellular processes, including cell cycle progression and DNA damage checkpoint. At the DNA damage checkpoint, some subtypes of 14‐3‐3 (β and ζ isoforms in mammalian cells and Rad24 in fission yeast) bind to Ser345‐phosphorylated Chk1 and promote its nuclear retention. Here, we report that 14‐3‐3γ forms a complex with Chk1 phosphorylated at Ser296, but not at ATR sites (Ser317 and Ser345). Ser296 phosphorylation is catalysed by Chk1 itself after Chk1 phosphorylation by ATR, and then ATR sites are rapidly dephosphorylated on Ser296‐phosphorylated Chk1. Although Ser345 phosphorylation is observed at nuclear DNA damage foci, it occurs more diffusely in the nucleus. The replacement of endogenous Chk1 with Chk1 mutated at Ser296 to Ala induces premature mitotic entry after ultraviolet irradiation, suggesting the importance of Ser296 phosphorylation in the DNA damage response. Although Ser296 phosphorylation induces the only marginal change in Chk1 catalytic activity, 14‐3‐3γ mediates the interaction between Chk1 and Cdc25A. This ternary complex formation has an essential function in Cdc25A phosphorylation and degradation to block premature mitotic entry after DNA damage.     

2′,3′-Dideoxy-3′-aminonucleoside 5′-triphosphates inhibit the repair of DNA in rat liver chromatin

2′,3′-Dideoxy-3′-aminonucleoside 5′-triphosphates are shown to be strong inhibitors of repair DNA synthesis in γ-irradiated rat liver chromatin. The activity of these compounds is comparable with that of the most effective inhibitor of the DNA polymerase β-catalyzed repair DNA synthesis.     

DNA polymerase κ‐dependent DNA synthesis at stalled replication forks is important for CHK1 activation

Formation of primed single‐stranded DNA at stalled replication forks triggers activation of the replication checkpoint signalling cascade resulting in the ATR‐mediated phosphorylation of the Chk1 protein kinase, thus preventing genomic instability. By using siRNA‐mediated depletion in human cells and immunodepletion and reconstitution experiments in Xenopus egg extracts, we report that the Y‐family translesion (TLS) DNA polymerase kappa (Pol κ) contributes to the replication checkpoint response and is required for recovery after replication stress. We found that Pol κ is implicated in the synthesis of short DNA intermediates at stalled forks, facilitating the recruitment of the 9‐1‐1 checkpoint clamp. Furthermore, we show that Pol κ interacts with the Rad9 subunit of the 9‐1‐1 complex. Finally, we show that this novel checkpoint function of Pol κ is required for the maintenance of genomic stability and cell proliferation in unstressed human cells.     

Synthetic α-helical peptides incorporating intercalators for DNA recognition

The design and synthesis of a water-soluble 14-residue peptide, in which a quinoline intercalator is attached to the peptide backbone via alkylation of a central cysteine residue, is reported. 600 MHz ¹H NMR spectroscopy and circular dichroism indicate that the peptide forms a nascent helix in aqueous solution, ie. an ensemble of turn-like structures over several adjacent residues in the peptide. A large number of sequential d_NN(i, i+1) connectivities were observed in NOESY spectra, and titration of trifluoroethanol into a solution of the peptide resulted in the characteristic CD spectrum expected for an α-helix. At low DNA concentrations, CD spectroscopy indicates that this helical conformation is stabilized, presumably due to folding of the peptide in the major groove of DNA.     

Multistate Luminescent Solar Concentrator “Smart” Windows

A supertwist liquid crystalline luminescent solar concentrator (LSC) “smart” window is fabricated which can be switched electrically between three states: one designed for increased light absorption and electrical generation (the “dark” state), one for transparency (the “light” state), and one for enhanced haziness (“scattering” state). In the scattering state, the absorption and edge emissions decrease while the face emissions are enhanced. This new LSC “smart” window state can find application as a privacy feature in housing, but could also allow for a new “smart” window application as a diffuse glazing to increase plant growth in horticultural applications.     

DNA primase associated with 10 S DNA polymerase α from calf thymus

Among multiple subspecies of DNA polymerase α of calf thymus, only 10 S DNA polymerase α had a capacity to initiate DNA synthesis on an unprimed single-stranded, circular M13 phage DNA in the presence of ribonucleoside triphosphates (DNA primase activity). The primase was copurified with 10 S DNA polymerase α through the purification and both activities cosedimented at 10 S through gradients of either sucrose or glycerol. Furthermore, these two activities were immunoprecipitated at a similar efficiency by a monoclonal antibody directed against calf thymus DNA polymerase α. These results indicate that the primase is tightly bound to 10 S DNA polymerase α. The RNA polymerizing activity was resistant to α-amanitin, required high concentration of all four ribonucleoside triphosphates (800 μM) for its maximal activity, and produced the limited length of oligonucleotides (around 10 nucleotides long) which were necessary to serve as a primer for DNA synthesis. Covalent bonding to RNA to DNA was strongly suggested by the nearest neighbour frequency analysis and the DNAase treatment. The DNA synthesis primed by the RNA oligomers may be carried out by the associating DNA polymerase α because it was strongly inhibited by araCTP, resistant to d₂TTP, and was also inhibited by aphidicolin but at relatively high concentration. The primase preferred single-stranded DNA as a template, but it also showed an activity on the double-stranded DNA from calf thymus at an efficiency of approx. 10% of that with single-stranded DNA.     

Structural basis for recognition of H3K4 methylation status by the DNA methyltransferase 3A ATRX–DNMT3–DNMT3L domain

DNMT3 proteins are de novo DNA methyltransferases that are responsible for the establishment of DNA methylation patterns in mammalian genomes. Here, we have determined the crystal structures of the ATRX–DNMT3–DNMT3L (ADD) domain of DNMT3A in an unliganded form and in a complex with the amino‐terminal tail of histone H3. Combined with the results of biochemical analysis, the complex structure indicates that DNMT3A recognizes the unmethylated state of lysine 4 in histone H3. This finding indicates that the recruitment of DNMT3A onto chromatin, and thereby de novo DNA methylation, is mediated by recognition of the histone modification state by its ADD domain. Furthermore, our biochemical and nuclear magnetic resonance data show mutually exclusive binding of the ADD domain of DNMT3A and the chromodomain of heterochromatin protein 1α to the H3 tail. These results indicate that de novo DNA methylation by DNMT3A requires the alteration of chromatin structure.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

A deep dig––hindsight on Holocene vegetation composition from ancient environmental DNA

Want a glimpse at past vegetation? Studying pollen and other plant remains, which are preserved for example in lake sediments or mires for thousands of years, allows us to document regional occurrences of plant species over radiocarbon‐dated time series. Such vegetation reconstructions derived from optical analyses of fossil samples are inherently incomplete because they only comprise taxa that contribute sufficient amounts of pollen, spores, macrofossil or other evidences. To complement optical analyses for paleoecological inference, molecular markers applied to ancient DNA (aDNA) may help in disclosing information hitherto inaccessible to biologists. Parducci et al. (2013) targeted aDNA from sediment cores of two lakes in the Scandes Mountains with generic primers in a meta‐barcoding approach. When compared to palynological records from the same cores, respective taxon lists show remarkable differences in their compositions, but also in quantitative representation and in taxonomic resolution similar to a previous study (Jørgensen et al. 2012). While not free of assumptions that need critical and robust testing, notably the question of possible contamination, this study provides thrilling prospects to improve our knowledge about past vegetation composition, but also other organismic groups, stored as a biological treasure in the ground.     

DNA recognition by β-sheets

The modes of DNA recognition by β-sheets are analyzed by using the known crystal and solution three-dimensional structures of DNA-protein complexes. Close fitting of the protein surface and the DNA surface determines the binding geometry. Interaction takes place so that essentially the N-to-C direction of the β-strands either follows or crosses the DNA groove. Upon following the major groove a two-stranded antiparallel β-sheet dives into the groove and contacts DNA bases with its convex side facing the DNA, while upon following the minor groove, it binds around the sugar-phosphate backbones, with its opposite concave side shielding the DNA. In order for the β-strands crossing the minor groove to interact with the DNA, the dinucleotide steps need to almost totally helically untwist and roll around major groove. The β-sheet, on the other hand, needs to adopt a concave curvature on the binding surface in the direction that follows the DNA minor groove, and a convex surface in the direction that bridges the sugar-phosphate backbones across the groove. The result is to produce a hyperbolic paraboloidal DNA-binding surface. © 1998 John Wiley & Sons, Inc. Biopoly 44: 335–359, 1997     

Cation–π, amino–π, π–π, and H‐bond interactions stabilize antigen–antibody interfaces

The identification of immunogenic regions on the surface of antigens, which are able to stimulate an immune response, is a major challenge for the design of new vaccines. Computational immunology aims at predicting such regions—in particular B‐cell epitopes—but is far from being reliably applicable on a large scale. To gain understanding into the factors that contribute to the antigen–antibody affinity and specificity, we perform a detailed analysis of the amino acid composition and secondary structure of antigen and antibody surfaces, and of the interactions that stabilize the complexes, in comparison with the composition and interactions observed in other heterodimeric protein interfaces. We make a distinction between linear and conformational B‐cell epitopes, according to whether they consist of successive residues along the polypeptide chain or not. The antigen–antibody interfaces were shown to differ from other protein–protein interfaces by their smaller size, their secondary structure with less helices and more loops, and the interactions that stabilize them: more H‐bond, cation–π, amino–π, and π–π interactions, and less hydrophobic packing; linear and conformational epitopes can clearly be distinguished. Often, chains of successive interactions, called cation/amino–π and π–π chains, are formed. The amino acid composition differs significantly between the interfaces: antigen–antibody interfaces are less aliphatic and more charged, polar and aromatic than other heterodimeric protein interfaces. Moreover, paratopes and epitopes—albeit to a lesser extent—have amino acid compositions that are distinct from general protein surfaces. This specificity holds promise for improving B‐cell epitope prediction. Proteins 2014; 82:1734–1746. © 2014 Wiley Periodicals, Inc.     

Eu3+–Eu2+‐doped xAl2O3–ySiO2 and xAl2O3–zMgO composites phosphors

In this paper, the Eu³⁺–Eu²⁺ (4%, molar ratio)‐doped xAl₂O₃–ySiO₂ (x = 0–2.5, y = 1–5) and xAl₂O₃–zMgO (x = 0–1.5, z = 0–3) composites phosphors with different Al₂O₃ to SiO₂ (A/S) and Al₂O₃ to MgO (A/M) ratios were prepared using a high‐temperature solid‐state reaction under air atmosphere. The effects of the A/S and A/M on luminescence properties, crystal structure, electron spin resonance, and Commission Internationale de l’Eclairage chromaticity coordinates of the samples were systematically analyzed. These results indicated that the different A/S and A/M ratios in the matrix effectively affected the crystal phase, degrees of self‐reduction of Eu³⁺, and led the relative emission intensity of Eu²⁺/Eu³⁺ to change and adjust.     

In vitro construction of bacteriophage λ and plasmid DNA molecules containing DNA fragments from bacteriophage T4

Restriction endonucleases EcoRI and HindIII generated fragments of T4 cytosine-containing DNA were inserted into bacteriophage vector λgtSu_III and plasmid vectors pMB9 and pBR313. Resulting clones were screened for hybridization with ³²P labeled T4 tRNA. Recombinant bacteriophages and plasmids were isolated which contained a T4 fragment coding for T4 RNA species 1 and 2 and T4 tRNA^Arg. Selected λ-T4 hybrid bacteriophages were grown to high titer and their DNA analyzed by gel electrophoresis.     

Isothermal amplification of DNA using quadruplex primers with fluorescent pteridine base analogue 3‐methyl isoxanthopterin

We previously developed a method, known as quadruplex priming amplification (QPA), which greatly simplifies DNA amplification and quantification assays. QPA employs specific primers based on GGGTGGGTGGGTGGG (G3T) sequence, which upon polymerase elongation spontaneously dissociates from the target and folds into a stable quadruplex. Fluorescent nucleotide analogs, when incorporated into these primers, emit light upon quadruplex formation and permit simple, specific, and sensitive quantification without the attachment of probe molecules. Here, we studied optical [fluorescence and circular dichroism (CD)] and thermodynamic properties of the G3T sequence and variants incorporating 3‐methylisoxanthopterin (3MI), a highly fluorescent nucleotide analog suitable for QPA. CD studies demonstrate that the incorporation of 3MI does not change the overall tertiary structure of G3T; however, thermal unfolding experiments revealed that it significantly destabilizes the quadruplex. Enzymatic studies revealed that Taq and Bst are practically unable to incorporate any nucleotides opposite to template 3MI. Based on this knowledge, we designed QPA assays with truncated targets that demonstrate efficient amplification around 55°C. Overall, these studies suggest that 3MI‐based QPA is a useful assay for DNA amplification and detection. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 583–590, 2014.     

Ruddlesden–Popper 2D Component to Stabilize γ‐CsPbI3 Perovskite Phase for Stable and Efficient Photovoltaics

The highest certified power conversion efficiency (PCE) of black phase based CsPbI₃ perovskite solar cells has exceeded 18%, and become a hotspot in recent progress. However, the black phase of CsPbI₃ rapidly transforms to yellow phase in ambient conditions due to its thermodynamic instability. Here, a Ruddlesden–Popper 2D structure is introduced into γ‐CsPbI₃ film to stabilize the black phase via reducing dimensionality. It is found that a judicious amount of phenylethylammonium iodide can adjust the dimensionality of γ‐CsPbI₃ film from 2D to quasi‐2D and 3D phase. Comprehensive consideration to obtain both the stability and high PCE, quasi‐2D (n = 40) γ‐CsPbI₃ delivers a reproducible PCE of 13.65% with negligible hysteresis. By utilizing femtosecond transient absorption and time‐resolved PL decay, similar carrier kinetics in n = 40 and ∞ samples are observed, meaning an efficient charge extraction. More importantly, when the device is placed at 80 °C in N₂ condition or in air with RH of 25–30%, its PCE keeps ≈88% and ≈89% of its initial PCE after 12 days, respectively. Such results are better than the 3D one (≈69% and ≈16%, respectively).