Aptamer beacons for the direct detection of proteins.

We have designed a new class of molecules, which we term aptamer beacons, for detecting a wide range of ligands. Similar to molecular beacons, aptamer beacons can adopt two or more conformations, one of which allows ligand binding. A fluorescence-quenching pair is used to report changes in conformation induced by ligand binding. An anti-thrombin aptamer was engineered into an aptamer beacon by adding nucleotides to the 5'-end which are complementary to nucleotides at the 3'-end of the aptamer. In the absence of thrombin, the added nucleotides will form a duplex with the 3'-end, forcing the aptamer beacon into a stem-loop structure. In the presence of thrombin, the aptamer beacon forms the ligand-binding structure. This conformational change causes a change in the distance between a fluorophore attached to the 5'-end and a quencher attached to the 3'-end. Aptamer beacon can be a sensitive tool for detecting proteins and other chemical compounds.     

In vitro selection of molecular beacons

While molecular beacons are primarily known as biosensors for the detection of nucleic acids, it has proven possible to adapt other nucleic acid binding species (aptamers) to function in a manner similar to molecular beacons, yielding fluorescent signals only in the presence of a cognate ligand. Unfortunately, engineering aptamer beacons requires a detailed knowledge of aptamer sequence and structure. In order to develop a general method for the direct selection of aptamer beacons we have first developed a selection method for molecular beacons. A pool of random sequence DNA molecules were immobilized via a capture oligonucleotide on an affinity column, and those variants that could be released from the column by a target oligonucleotide were amplified. After nine rounds of selection and amplification the elution characteristics of the population were greatly improved. A fluorescent reporter in the selected beacons was located adjacent to a DABCYL moiety in the capture oligonucleotide; addition of the target oligonucleotide led to release of the capture oligonucleotide and up to a 17-fold increase in fluorescence. Signaling was specific for the target oligonucleotide, and occurred via a novel mechanism, relative to designed molecular beacons. When the target oligonucleotide is bound it can form a stacked helical junction with an intramolecular hairpin in the selected beacon; formation of the intramolecular hairpin in turn leads to release of the capture oligonucleotide. The ability to select molecular beacons may prove useful for identifying available sites on complex targets, such as mRNAs, while the method for selection can be easily generalized to other, non-nucleic acid target classes.     

以分子信标为报告分子的凝血酶检测新方法

以分子信标为报告分子,核酸适体为识别分子,发展了一种新的凝血酶检测方法.含有分子信标互补序列的核酸适体探针与凝血酶结合后,分子信标的荧光信号下降,从而得到凝血酶的浓度信息.该方法快速、灵敏,核酸适体探针无需荧光标记、设计简单,检测限达到0.83nmol/L.     

Serum inverts and improves the fluorescence response of an aptamer beacon to various vitamin D analytes

A dominant aptamer loop structure from a library of nearly 100 candidate aptamer sequences developed against immobilized 25‐hydroxyvitamin D₃ (calcidiol) was converted into a 5′‐TYE 665 and 3′‐Iowa black‐labelled aptamer beacon. The aptamer beacon exhibited a mild 'lights on' reaction in buffer as a function of increasing concentrations of several vitamin D analogues and metabolites, with a limit of detection of approximately 200 ng/mL, and was not specific for any particular congener. In 10% or 50% human serum, the same aptamer beacon inverted its fluorescence behaviour to become a more intense 'lights off' reaction with an improved limit of detection in the range 4–16 ng/mL. We hypothesized that this drastic change in fluorescence behaviour was due to the presence of creatinine and urea in serum, which might destabilize the quenched beacon, causing an increase in fluorescence followed by decreasing fluorescence as a function of vitamin D concentrations that may bind and quench increasingly greater fractions of the denatured beacons. However, the results of several control experiments in the presence of physiological or greater concentrations of creatinine and urea, alone or combined in buffer, failed to produce the beacon fluorescence inversion. Other possible mechanistic hypotheses are also discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

A novel electrochemical detection method for aptamer biosensors

A beacon aptamer-based biosensor for the detection of thrombin was developed using electrochemical transduction method. Gold surface was modified with a beacon aptamer covalently linked at 5'-terminus with a linker containing a primary aliphatic amine. Methylene blue (MB) was intercalated into the beacon sequence, and used as an electrochemical marker. When the beacon aptamer immobilized on gold surface encounters thrombin, the hairpin forming beacon aptamer is conformationally changed to release the intercalated MB, resulting a decrease in electrical current intensity in voltamogram. The peak signal of the MB is clearly decreased by the binding of thrombin onto the beacon aptamer. The linear range of the signal was observed between 0 and 50.8 nM of thrombin with 0.999 correlation factor. This method was able to linearly and selectively detect thrombin with a detection limit of 11 nM.     

Insight into the molecular recognition of spermine by DNA quadruplexes from an NMR study of the association of spermine with the thrombin‐binding aptamer

The preferred residence sites and the conformation of DNA‐bound polyamines are central to understanding the regulatory roles of polyamines. To this end, we have used a series of selective ¹³C‐edited and selective total correlation spectroscopy‐edited one‐dimensional (1D) nuclear Overhauser effect spectroscopy NMR experiments to determine a number of intramolecular ¹H nuclear Overhauser effect (NOE) connectivities in ¹³C‐labelled spermine bound to the thrombin‐binding aptamer. The results provide evidence that the aptamer‐bound spermine adopts a conformation that optimizes electrostatic and hydrogen bond contacts with the aptamer backbone. The distance between the nitrogen atoms of the central aminobutyl is reduced by an increase in the population of gauche conformers at the C6–C7 bonds, which results in either a curved or S‐shaped spermine conformation. Molecular modelling contributes insight toward the mode of spermine binding of these spermine structures within the narrow grooves of DNA quadruplexes. In each case, the N5 ammonium group makes hydrogen bonds with two nearby phosphates across the narrow groove. Our results have implications for the understanding of chromatin structure and the rational design of quadruplex‐binding drugs. Copyright © 2013 John Wiley & Sons, Ltd.     

A quantum dot-aptamer beacon using a DNA intercalating dye as the FRET reporter: application to label-free thrombin detection

A new quantum dot (QD)-aptamer (apt) beacon that acts by folding-induced dissociation of a DNA intercalating dye, BOBO-3(B), is demonstrated with label-free thrombin detection. The beacon, denoted as QD-apt:B, is constructed by (1) coupling of a single-stranded thrombin aptamer to Qdot 565 via EDC/Sulfo-NHS chemistry and (2) staining the duplex regions of the aptamer on QD with excess BOBO-3 before thrombin binding. When mixing a thrombin sample with QD-apt:B, BOBO-3 is competed away from the beacon due to target-induced aptamer folding, which then causes a decrease in QD fluorescence resonance energy transfer (FRET)-mediated BOBO-3 emission and achieves thrombin quantitation. In this work, the effects of Mg(2+), coupling time, and aptamer type on the beacon's performances are investigated and discussed thoroughly with various methods, including transmission electron microscopy (TEM), dynamic light scattering (DLS), and two-color differential gel electrophoresis. Using the best aptamer beacon (HTQ37), we attain highly specific and wide-range detection (from nM to μM) of thrombin in buffer, and the beacon can sense nM-range thrombin in 15% diluted serum. Compared to the reported QD aptamer assays, our method is advantageous from the aspect of using a simple sensory unit design without losing the detection sensitivity. Therefore, we consider the QD-apt:B beacon a potential alternative to immuno-reagents and an effective tool to study nucleic acid folding on QD as well.     

Directly investigating the interaction between aptamers and thrombin by atomic force microscopy

Aptamers are single‐stranded nucleic acid molecules that can be used for protein recognition, detection, and inhibition. Over the past decades, two thrombin‐binding aptamers (15apt and 27apt) were reported by systemic evolution of ligands by exponential enrichment technique. Though many studies have been reported about the interactions between the aptamers and thrombin by atomic force microscopy, the thrombins in those studies were all immobilized by chemical agents. Recently, we developed a new method using atomic force microscopy to directly investigate the specific interactions between thrombin and its two aptamers without immobilizing the thrombin. Furthermore, the unbinding dynamics and dissociation energy landscapes of aptamer/thrombin were discussed. The results indicate that the underlying interaction mechanisms of thrombin with its two aptamers will be similar despite that the structures of 15apt and 27apt are different in buffer solution. Copyright © 2013 John Wiley & Sons, Ltd.     

适配子在生化分析中的应用进展

适配子具有亲和力高、特异性强、靶分子范围广、稳定性好、制备及修饰容易、可重复利用等优点,可以作为与抗体竞争的一类分子识别物质,用于亲和PCR、生物传感器、适配子信标、色谱法、质谱法、毛细管电泳、流式细胞分析及荧光偏振等分析领域,显示出广阔的应用前景。     

Nanostructure shape effects on response of plasmonic aptamer sensors

A localized surface plasmon resonance (LSPR) sensor surface was fabricated by the deposition of gold nanorods on a glass substrate and subsequent immobilization of the DNA aptamer, which specifically bind to thrombin. This LSPR aptamer sensor showed a response of 6‐nm λ_max shift for protein binding with the detection limit of at least 10 pM, indicating one of the highest sensitivities achieved for thrombin detection by optical extinction LSPR. We also tested the LSPR sensor fabricated using gold bipyramid, which showed higher refractive index sensitivity than the gold nanorods, but the overall response of gold bipyramid sensor appears to be 25% less than that of the gold nanorod substrate, despite the approximately twofold higher refractive index sensitivity. XPS analysis showed that this is due to the low surface density of aptamers on the gold bipyramid compared with gold nanorods. The low surface density of the aptamers on the gold bipyramid surface may be due to the effect of shape of the nanostructure on the kinetics of aptamer monolayer formation. The small size of aptamers relative to other bioreceptors is the key to achieving high sensitivity by biosensors on the basis of LSPR, demonstrated here for protein binding. The generality of aptamer sensors for protein detection using gold nanorod and gold nanobipyramid substrates is anticipated to have a large impact in the important development of sensors toward biomarkers, environmental toxins, and warfare agents. Copyright © 2013 John Wiley & Sons, Ltd.     

Crystal structure of an RNA aptamer bound to thrombin

Aptamers, an emerging class of therapeutics, are DNA or RNA molecules that are selected to bind molecular targets that range from small organic compounds to large proteins. All of the determined structures of aptamers in complex with small molecule targets show that aptamers cage such ligands. In structures of aptamers in complex with proteins that naturally bind nucleic acid, the aptamers occupy the nucleic acid binding site and often mimic the natural interactions. Here we present a crystal structure of an RNA aptamer bound to human thrombin, a protein that does not naturally bind nucleic acid, at 1.9 A resolution. The aptamer, which adheres to thrombin at the binding site for heparin, presents an extended molecular surface that is complementary to the protein. Protein recognition involves the stacking of single-stranded adenine bases at the core of the tertiary fold with arginine side chains. These results exemplify how RNA aptamers can fold into intricate conformations that allow them to interact closely with extended surfaces on non-RNA binding proteins.     

Facile conversion of ATP-binding RNA aptamer to quencher-free molecular aptamer beacon

We have developed RNA-based quencher-free molecular aptamer beacons (RNA-based QF-MABs) for the detection of ATP, taking advantage of the conformational changes associated with ATP binding to the ATP-binding RNA aptamer. The RNA aptamer, with its well-defined structure, was readily converted to the fluorescence sensors by incorporating a fluorophore into the loop region of the hairpin structure. These RNA-based QF-MABs exhibited fluorescence signals in the presence of ATP relative to their low background signals in the absence of ATP. The fluorescence emission intensity increased upon formation of a RNA-based QF-MAB·ATP complex.     

Investigation of the interactions between aptamer and misfolded proteins: From monomer and oligomer to fibril by single‐molecule force spectroscopy

Increasing knowledge on the understanding interactions of aptamer with misfolded proteins (including monomer, oligomer, and amyloid fibril) is crucial for development of aggregation inhibitors and diagnosis of amyloid diseases. Herein, the interactions of lysozyme monomer–, oligomer‐, and amyloid fibril–aptamer were investigated using single‐molecule force spectroscopy. The results revealed that the aptamer screened against lysozyme monomer could also bind to oligomer and amyloid fibril, in spite of the recognition at a lower binding probability. It may be attributed to the inherent structural differences of misfolded proteins and the flexible conformation of aptamer. In addition, dynamic force spectra showed that there were similar dissociation paths in the dissociation process of lysozyme monomer–, oligomer‐, and amyloid fibril–aptamer complexes. It showed that the dissociation only passed 1 energy barrier from the binding state to the detachment. However, the dynamic parameters suggested that the oligomer‐ and amyloid fibril–aptamer were more stable than lysozyme monomer–aptamer. The phenomena may result from the exposure of aptamer‐recognized sequences on the surface and the electrostatic interactions. This work demonstrated that single‐molecule force spectroscopy could be a powerful tool to study the binding behavior of the aptamer with misfolded proteins at single‐molecule level, providing abundant information for researches and comprehensive applications of aptamer probes in diagnosis of amyloid diseases.     

Target discrimination by surface-immobilized molecular beacons designed to detect Francisella tularensis

A molecular beacon (MB) array was designed based on unique regions of the 16S rRNA of the bacterium Francisella tularensis. Nucleic acid molecular beacons undergo a spontaneous fluorogenic conformational change when they hybridize to specific complementary targets. The array was printed on aldehyde glass or hydrogel slides and evaluated for functioning in presence of complementary oligonucleotide sequences, single-nucleotide mismatch sequences and multiple nucleotide mismatch sequences. Discriminating true target from mismatched targets was found to be dependent on type, number, and location of mismatches within the beacon (i.e. located in the stem or loop regions). Optimal conditions for molecular beacon deposition, and target hybridization were determined for oligonucleotide target mismatch discrimination. The beacon array was stable upon recharging by exposure to an alkaline solution, and repeatedly used. In addition, performance of the beacon array biosensor was compared with molecular beacons in homogeneous solution.     

Synergistic effect of aptamers that inhibit exosites 1 and 2 on thrombin

Thrombin is a multifunctional protease that plays a key role in hemostasis, thrombosis, and inflammation. Most thrombin inhibitors currently used as antithrombotic agents target thrombin''s active site and inhibit all of its myriad of activities. Exosites 1 and 2 are distinct regions on the surface of thrombin that provide specificity to its proteolytic activity by mediating binding to substrates, receptors, and cofactors. Exosite 1 mediates binding and cleavage of fibrinogen, proteolytically activated receptors, and some coagulation factors, while exosite 2 mediates binding to heparin and to platelet receptor GPIb-IX-V. The crystal structures of two nucleic acid ligands bound to thrombin have been solved. Previously Padmanabhan and colleagues solved the structure of a DNA aptamer bound to exosite 1 and we reported the structure of an RNA aptamer bound to exosite 2 on thrombin. Based upon these structural studies we speculated that the two aptamers would not compete for binding to thrombin. We observe that simultaneously blocking both exosites with the aptamers leads to synergistic inhibition of thrombin-dependent platelet activation and procoagulant activity. This combination of exosite 1 and exosite 2 inhibitors may provide a particularly effective antithrombotic approach.     

Integration of multiple computer modeling software programs for characterization of a brain natriuretic peptide sandwich DNA aptamer complex

Several molecular modeling programs including Pep‐Fold 3, Vienna RNA, RNA Composer, Avogadro, PatchDock, RasMol, and VMD were used to define the three‐dimensional and basic binding characteristics of an extant sandwich DNA aptamer assay complex for human brain natriuretic peptide (BNP). In particular, the theoretical question of demonstrating likely binding of 72 base capture and reporter aptamers to at least two separate “epitopes” or binding sites on the small 32‐amino acid BNP target was addressed, and the data support the existence of separate aptamer binding sites on BNP. The binding model was based on first docking BNP to the capture aptamer based on shape complementarity with PatchDock, followed by docking the capture aptamer‐BNP complex with the reporter aptamer in PatchDock. Although, shape complementarity clearly dominated this binding model and aptamers are known to be somewhat flexible, the model demonstrates hydrogen bond stabilization within each of the two different aptamers and between the aptamers and the BNP target, thus suggesting a strong binding and high affinity sandwich assay that matches the author's former published assay results (Bruno et al., Microchem. J. 2014;115:32‐38) with subpicogram per milliliter sensitivity and good specificity. Other aspects such as capture and reporter aptamer interactions in the absence of BNP are illustrated and suggest means for potentially improving the existing assay by truncating the capture and reporter aptamers where they overlap to further decrease background signal levels.     

The thrombin binding aptamer GGTTGGTGTGGTTGG forms a bimolecular guanine tetraplex

In the literature, the thrombin binding aptamer GGTTGGTGTGGTTGG is generally taken as a prototype of an intramolecular guanine tetraplex of DNA. Our results, however, show that this notion is not true in aqueous solutions. This conclusion is based on a dependence of the CD spectra on aptamer concentration, migration of the aptamer in polyacrylamide gels, and the Ferguson analysis of the gel migration data. The presented data document that the aptamer forms a bimolecular tetraplex. We furthermore show that only an extension of the aptamer by a sequence containing further guanines, or an elongation of loop regions, causes that its tetraplex folding is intramolecular.     

一种新的基于适体和酶切保护分析的超灵敏蛋白质检测方法

以凝血酶适体(aptamer)为例,利用适体和核酸外切酶特性,通过定量PCR扩增建立一种高灵敏的蛋白质检测方法.首先合成3段寡核苷酸序列即凝血酶适体探针,上游连接子和下游连接子.将适体探针与凝血酶温育结合后,再加入核酸外切酶I降解未能结合的探针.接着将保护下来的探针与连接子杂交、连接和对连接产物进行定量PCR .分别建立连接产物标准品浓度与Ct 值的标准曲线和凝血酶浓度与连接产物浓度的标准曲线,通过定量PCR对凝血酶进行定量.结果显示,基于适体的外切酶保护凝血酶检测方法灵敏度较高,连接产物标准品浓度的对数值和Ct 值之间的方程为y =- 2 95x + 33 6 5 (R2 =0. 990 ,P <0 .0 1) ;凝血酶浓度和连接产物浓度对数值之间的方程为y =0 94x - 0 . 2 9(R2 =0 . 998,P <0 . 0 1) ,还对可能影响检测的有关参数举行了探讨.