Mg2+ ions bind at the C‐terminal region of skeletal muscle α‐tropomyosin

Tropomyosin (Tm) is a dimeric coiled‐coil protein that polymerizes through head‐to‐tail interactions. These polymers bind along actin filaments and play an important role in the regulation of muscle contraction. Analysis of its primary structure shows that Tm is rich in acidic residues, which are clustered along the molecule and may form sites for divalent cation binding. In a previous study, we showed that the Mg²⁺‐induced increase in stability of the C‐terminal half of Tm is sensitive to mutations near the C‐terminus. In the present report, we study the interaction between Mg²⁺ and full‐length Tm and smaller fragments corresponding to the last 65 and 26 Tm residues. Although the smaller Tm peptide (Tm_{259‐284(W269)}) is flexible and to large extent unstructured, the larger Tm_{220‐284(W269)} fragment forms a coiled coil in solution whose stability increases significantly in the presence of Mg²⁺. NMR analysis shows that Mg²⁺ induces chemical shift perturbations in both Tm_{220‐284(W269)} and Tm_{259‐284(W269)} in the vicinity of His276, in which are located several negatively charged residues. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 583–590, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Solution structure of a novel T‐cell adhesion inhibitor derived from the fragment of ICAM‐1 receptor: Cyclo(1,8)‐Cys‐Pro‐Arg‐Gly‐Gly‐Ser‐Val‐Cys

This study is aimed at elucidating the structure of a novel T‐cell adhesion inhibitor, cyclo(1,8)‐CPRGGSVC using one‐ and two‐dimensional (2D) ¹H NMR and molecular dynamics (MD) simulation. The peptide is derived from the sequence of its parent peptide cIBR (cyclo(1,12)‐PenPRGGSVLVTGC), which is a fragment of intercellular adhesion molecule‐1 (ICAM‐1). Our previous results show that the cyclo(1,8)‐CPRGGSVC peptide binds to the LFA‐1 I‐domain and inhibits heterotypic T‐cell adhesion, presumably by blocking the LFA‐1/ICAM‐1 interactions. The structure of the peptide was determined using NMR and MD simulation in aqueous solution. Our results indicate that the peptide adopts type‐I β‐turn conformation at the Pro2‐Arg3‐Gly4‐Gly5 (PRGG) sequence. The β‐turn structure at the PRGG motif is well conserved in cIBR peptide and ICAM‐1 receptor, which suggests the importance of the PRGG motif for the biological activity of cyclo(1,8)‐CPRGGSVC peptide. Meanwhile, the Gly5‐Ser6‐Val7‐Cys8‐Cys1 (GSVCC) sequence forms a “turn‐like” random coil structure that does not belong to any structured motif. Therefore, cyclo(1,8)‐CPRGGSVC peptide has only one structured region at the PRGG sequence, which may play an important role in the binding of the peptide to the LFA‐1 I‐domain. The conserved β‐turn conformation of the PRGG motif in ICAM‐1, cIBR, and cyclo(1,8)‐CPRGGSVC peptides can potentially be used to design peptidomimetics. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 633–641, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Synthesis of quadruplex‐forming tetra‐end‐linked oligonucleotides: Effects of the linker size on quadruplex topology and stability

G‐quadruplexes are characteristic structural arrangements of guanine‐rich DNA sequences that abound in regions with relevant biological significance. These structures are highly polymorphic differing in the number and polarity of the strands, loop composition, and conformation. Furthermore, the cation species present in solution strongly influence the topology of the G‐quadruplexes. Recently, we reported the synthesis and structural studies of new G‐quadruplex forming oligodeoxynucleotides (ODNs) in which the 3′‐ and/or the 5′‐ends of four ODN strands are linked together by a non‐nucleotidic tetra‐end‐linker (TEL). These TEL‐ODN analogs having the sequence TGGGGT are able to form parallel G‐quadruplexes characterized by a remarkable high thermal stability. We report here an investigation about the influence of the reduction of the TEL size on the molecularity, topology, and stability of the resulting TEL‐G‐quadruplexes using a combination of circular dichroism (CD), CD melting, ¹H NMR spectroscopy, gel electrophoresis, and molecular modeling data. We found that all TEL‐(TGGGGT)₄ analogs, regardless the TEL size and the structural orientation of the ODN branches, formed parallel TEL‐G‐quadruplexes. The molecular modeling studies appear to be consistent with the experimental CD and NMR data revealing that the G‐quadruplexes formed by TEL‐ODNs having the longer TEL (L 1 ‐ 4 ) are more stable than the corresponding G‐quadruplexes having the shorter TEL (S 1 ‐ 4 ). The relative stability of S 1 ‐ 4 was also reported. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 466–477, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Peptidic modulators of protein‐protein interactions: Progress and challenges in computational design

With the decline in productivity of drug‐development efforts, novel approaches to rational drug design are being introduced and developed. Naturally occurring and synthetic peptides are emerging as novel promising compounds that can specifically and efficiently modulate signaling pathways in vitro and in vivo. We describe sequence‐based approaches that use peptides to mimic proteins in order to inhibit the interaction of the mimicked protein with its partners. We then discuss a structure‐based approach, in which protein‐peptide complex structures are used to rationally design and optimize peptidic inhibitors. We survey flexible peptide docking techniques and discuss current challenges and future directions in the rational design of peptidic inhibitors. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 505–513, 2009. This article was originally published online as an accepted preprint. The “Published Online”date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Field‐based comparison of ligand and coactivator binding sites of nuclear receptors

A structure‐based comparison of the ligand‐binding domains of 35 nuclear receptors from five different subfamilies is presented. Their ligand and coactivator binding sites are characterized using knowledge‐based contact preference fields for hydrophobic and hydrophilic interactions implemented in the MOE modeling environment. Additionally, for polar knowledge‐based field points the preference for negative or positive electrostatic interactions is estimated using the Poisson‐Boltzmann equation. These molecular‐interaction fields are used to cluster the nuclear receptor family based on similarities of their binding sites. By analyzing the similarities and differences of hydrophobic and polar fields in binding pockets of related receptors it is possible to identify conserved interactions in ligand and coactivator binding pockets, which support e.g. design of specific ligands during lead optimization or virtual screening as docking filter. Examples of remarkable similarities between ligand binding sites of members from phylogenetically different nuclear receptor families (RXR, RAR, HNF4, NR5) and differences between closely related subtypes (LXR, RAR, TR) are discussed in more detail. Significant similarities and differences of coactivator binding sites are shown for NR3Cs, LXRs and PPARs. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 884–894, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of the human cannabinoid receptor one carboxyl‐terminus identifies two amphipathic helices

Recent research has implicated the C‐terminus of G‐protein coupled receptors in key events such as receptor activation and subsequent intracellular sorting, yet obtaining structural information of the entire C‐tail has proven a formidable task. Here, a peptide corresponding to the full‐length C‐tail of the human CB1 receptor (residues 400–472) was expressed in E.coli and purified in a soluble form. Circular dichroism (CD) spectroscopy revealed that the peptide adopts an α‐helical conformation in negatively charged and zwitterionic detergents (48–51% and 36–38%, respectively), whereas it exhibited the CD signature of unordered structure at low concentration in aqueous solution. Interestingly, 27% helicity was displayed at high peptide concentration suggesting that self‐association induces helix formation in the absence of a membrane mimetic. NMR spectroscopy of the doubly labeled (¹⁵N‐ and ¹³C‐) C‐terminus in dodecylphosphocholine (DPC) identified two amphipathic α‐helical domains. The first domain, S401‐F412, corresponds to the helix 8 common to G protein‐coupled receptors while the second domain, A440‐M461, is a newly identified structural motif in the distal region of the carboxyl‐terminus of the receptor. Molecular modeling of the C‐tail in DPC indicates that both helices lie parallel to the plane of the membrane with their hydrophobic and hydrophilic faces poised for critical interactions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 565–573, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

On the mechanism of SDS‐induced protein denaturation

To understand the mechanism of ionic detergent‐induced protein denaturation, this study examines the action of sodium dodecyl sulfate on ferrocytochrome c conformation under neutral and strongly alkaline conditions. Equilibrium and stopped‐flow kinetic results consistently suggest that tertiary structure unfolding in the submicellar and chain expansion in the micellar range of SDS concentrations are the two major and discrete events in the perturbation of protein structure. The nature of interaction between the detergent and the protein is predominantly hydrophobic in the submicellar and exclusively hydrophobic at micellar levels of SDS concentration. The observation that SDS also interacts with a highly denatured and negatively charged form of ferrocytochrome c suggests that the interaction is independent of structure, conformation, and ionization state of the protein. The expansion of the protein chain at micellar concentration of SDS is driven by coulombic repulsion between the protein‐bound micelles, and the micelles and anionic amino acid side chains. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 186–199, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mechanism of formation of the C‐terminal β‐hairpin of the B3 domain of the immunoglobulin‐binding protein G from Streptococcus. IV. Implication for the mechanism of folding of the parent protein

A 34‐residue α/β peptide [IG(28–61)], derived from the C‐terminal part of the B3 domain of the immunoglobulin binding protein G from Streptoccocus, was studied using CD and NMR spectroscopy at various temperatures and by differential scanning calorimetry. It was found that the C‐terminal part (a 16‐residue‐long fragment) of this peptide, which corresponds to the sequence of the β‐hairpin in the native structure, forms structure similar to the β‐hairpin only at T = 313 K, and the structure is stabilized by non‐native long‐range hydrophobic interactions (Val47–Val59). On the other hand, the N‐terminal part of IG(28–61), which corresponds to the middle α‐helix in the native structure, is unstructured at low temperature (283 K) and forms an α‐helix‐like structure at 305 K, and only one helical turn is observed at 313 K. At all temperatures at which NMR experiments were performed (283, 305, and 313 K), we do not observe any long‐range connectivities which would have supported packing between the C‐terminal (β‐hairpin) and the N‐terminal (α‐helix) parts of the sequence. Such interactions are absent, in contrast to the folding pathway of the B domain of protein G, proposed recently by Kmiecik and Kolinski (Biophys J 2008, 94, 726–736), based on Monte‐Carlo dynamics studies. Alternative folding mechanisms are proposed and discussed. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 469–480, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Comparing four different approaches for the determination of inter‐residue interactions provides insight for the structure prediction of helical membrane proteins

Studying inter‐residue interactions provides insight into the folding and stability of both soluble and membrane proteins and is essential for developing computational tools for protein structure prediction. As the first step, various approaches for elucidating such interactions within protein structures have been proposed and proven useful. Since different approaches may grasp different aspects of protein structural folds, it is of interest to systematically compare them. In this work, we applied four approaches for determining inter‐residue interactions to the analysis of three distinct structure datasets of helical membrane proteins and compared their correlation to the three individual quality measures of structures in these datasets. These datasets included one of 35 structures of rhodopsin receptors and bacterial rhodopsins determined at various resolutions, one derived from the HOMEP benchmark dataset previously reported, and one comprising of 139 homology models. It was found that the correlation between the average number of inter‐residue interactions obtained by applying the four approaches and the available structure quality measures varied quite significantly among them. The best correlation was achieved by the approach focusing exclusively on favorable inter‐residue interactions. These results provide interesting insight for the development of objective quality measure for the structure prediction of helical membrane proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 547–556, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

On the use of ESI‐QqTOF‐MS/MS for the comparative sequencing of nucleic acids

The usability of a quadrupole—quadrupole—time‐of‐flight (QqTOF) instrument for the tandem mass spectrometric sequencing of oligodeoxynuleotides was investigated. The sample set consisted of 21 synthetic oligodeoxynucleotides ranging in length from 5 to 42 nucleotides. The sequences were randomly selected. For the majority of tested oligonucleotides, two or three different charge states were selected as precursor ions. Each precursor ion was fragmented applying several different collision voltages. Overall 282 fragment ion mass spectra were acquired. Computer‐aided interpretation of fragment ion mass spectra was accomplished with a recently introduced comparative sequencing algorithm (COMPAS). The applied version of COMPAS was specifically optimized for the interpretation of information‐rich spectra obtained on the QqTOF. Sequences of oligodeoxynucleotides as large as 26‐mers were correctly verified in >94% of cases (182 of 192 spectra acquired). Fragment ion mass spectra of larger oligonucleotides were not specific enough for sequencing. Because of the occurrence of extensive internal fragmentation causing low sequence coverage paired with a high probability of assigning fragment ions to wrong sequences, tandem mass spectra obtained from oligonucleotides consisting of 30 and more nucleotides could not be used for sequence verification neither manually nor with COMPAS. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 401–409, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Terminal sidechain packing of a designed β‐hairpin influences conformation and stability

While end capping in α‐helices is well understood, the concept of capping a β‐hairpin is a relatively recent development; to date, favorable Coulombic interactions are the only example of sidechains at the termini influencing the overall stability of a β‐hairpin. While cross‐strand hydrophobic residues generally provide hairpin stabilization, particular when flanking the turn region, those remote from this location appear to provide little stabilization. While probing for an optimal residue at a hydrogen bond position near the terminus of a designed β‐hairpin a conservative, hydrophobic, V → I mutation was observed to not only result in a significant change in fold population but also effected major changes in the structuring shifts at numerous sites in the peptide. Mutational studies reveal that there is an interaction between the sidechain at this H‐bonded site and the sidechain at the C‐terminal non‐H‐bonded site of the hairpin. This interaction, which appears to be hydrophobic in character, requires a highly twisted hairpin structure. Modifications at the C‐terminal site, for example an E → A mutation (ΔΔG_U = 6 kJ/mol), have profound affects on fold structure and stability. The data suggests that this may be a case of hairpin end capping by the formation of a hydrophobic cluster. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 557–564, 2009. This article was originally published online as an accepted preprint. The “Published Online”date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Kinetics of the self‐aggregation and film formation of poly‐L‐proline at high temperatures explored by circular dichroism spectroscopy

Poly‐L ‐proline has been used as a model system for various purposes over a period of more than 60 years. Its relevance among the protein/peptide community stems from its use as a reference system for determining the conformational distributions of unfolded peptides and proteins, its use as a molecular ruler, and from the pivotal role of proline residues in conformational transitions and protein–protein interactions. While several studies indicate that polyproline can aggregate and precipitate in aqueous solution, a systematic study of the aggregation process is still outstanding. We found, by means of UV‐circular dichroism and IR measurements, that polyproline is predominately monomeric at room temperature at millimolar concentrations. Upon heating, the polypeptide stays in its monomeric state until the temperature reaches a threshold of ca. 60°C. At higher temperatures, the peptide aggregates as a film on the inside surface of the employed cuvette. The process proceeds on a time scale of 10³ s and can best be described by a bi‐exponential relaxation function. The respective CD and IR spectra are qualitatively different from the canonical spectra of polyproline in aqueous solution, and are indicative of a highly packed state. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 451–457, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Specific DNA G‐quadruplexes bind to ethanolamines

A significant number of G‐quadruplex‐forming sequences have been revealed in human genome by bioinformatic searches, implying that G‐quadruplexes may be involved in important biological processes and may be new chemotherapeutic targets. Therefore, it is important to discover the potential interactions of G‐quadruplexes with other molecules or groups. Here we describe a class of G‐quadruplexes, which can bind to ethanolamine groups that widely exist in biomolecules and drug molecules. The specific interaction of these G‐quadruplexes with ethanolamine groups was identified by high performance affinity chromatography (HPAC) using immobilized ethanolamine and diethanolamine as stationary phase reagents. The circular dichroism (CD) spectra and native polyacrylamide gel electrophoresis (PAGE) show that these ethanolamine binding quadruplexes adopt an intramolecularly parallel structure. The relationship of ethanolamine binding and G‐quadruplexe structure provides new clues for the G‐quadruplex‐related studies as well as for the molecular designs of therapeutic reagents. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 874–883, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Dissecting membrane protein architecture: An annotation of structural complexity

α‐Helical membrane proteins exist in an anisotropic environment which strongly influences their folding, stability, and architecture, which is far more complex than a simple bundle of transmembrane helices, notably due to helix deformations, prosthetic groups and extramembrane structures. However, the role and the distribution of such heterogeneity in the supra molecular organization of membrane proteins remains poorly investigated. Using a nonredundant subset of α‐helical membrane proteins, we have annotated and analyze the statistics of several types of new elements such as incomplete helices, intramembrane loops, helical extensions of helical transmembrane domains, extracellular loops, and helices lying parallel to the membrane surface. The relevance of the annotation scheme was studied using residue composition, statistics, physical chemistry, and symmetry of their distribution in relation to the immediate membrane environment. Calculation of hydrophobicity using different scales show that different structural elements appear to have affinities coherent with their position in the membrane. Examination of the annotation scheme suggests that there is considerable information content in the amino acid compositions of the different elements suggesting that it might be useful for structural prediction. More importantly, the proposed annotation will help to decipher the complex hierarchy of interactions involved in membrane protein architecture. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 815–829, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural transition from dimeric to tetrameric i‐motif,caused by the presence of TAA at the 3′‐end of human telomeric C‐rich sequence

Widely dispersed in genomic DNA, the tandem C‐rich repetitive stretches may fold below physiological pH, into i‐motif structures, stabilized by C·C⁺ pairing. Herein, structural status of a 9‐mer stretch d(CCCTAACCC), [the truncated double repeat of human telomeric sequence], and its extended version, comprising of additional ? TAA segment at the 3′‐end, representing the complete double repeat d(CCCTAACCCTAA), has been investigated. The pH dependent monophasic UV‐melting, Gel and CD data suggested that while the truncated version adopts a bimolecular i‐motif structure, its complete double repeat (12‐mer) sequence exists in two (bimolecular and tetramolecular) forms. A model is proposed for the tetramolecular i‐motif with conventional C · C⁺ base pairs, additionally stabilized by asymmetric A · A base pairs at the ?3′ TAA flanking ends and Watson–Crick A · T hydrogen bonding between intervening bases on antiparallel strands. Expanding the known topologies of DNA i‐motifs, such atypical geometries of i‐motifs may have implications in their recognition by proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 150–160, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Uncover the conserved property underlying sequence‐distant and structure‐similar proteins

It is widely accepted that a protein's sequence determines its structure. The surprising finding that proteins of distant sequence can adopt similar 3D structures has raised interesting questions regarding underlying conserved properties that are essential for protein folding and stability. Uncovering the conserved properties may shed light on the folding mechanism of proteins and help with the development of computational tools for protein structure prediction. We compiled and analyzed a structure pair dataset of 66 high‐resolution and low sequence identity (16–38%) soluble proteins. Structure deviation for each pair was confirmed by calculating its C_α SiMax value and comparing its potential energy per residue. Analysis of favorable inter‐residue interactions for each structure pair indicated that the average number of inter‐residue interactions within each structure represents a conserved feature of homologous structures of distant sequence. Detailed comparison of individual types of interactions showed that the average number of either hydrophobic or hydrogen bonding interactions remains unchanged for each structure pair. These findings should be of help to improving the quality of homology models based on templates of low sequence identity, thus broadening the application of homology modeling techniques for protein studies. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 340–347, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Activation of lactoperoxidase by heme‐linked protonation and heme‐independent iodide binding

Lactoperoxidase (LPO), a mammalian secretory heme peroxidase, catalyzes the oxidation of thiocyanate by hydrogen peroxide to produce hypothiocyanate, an antibacterial agent. Although LPO is known to be activated at acidic pH and in the presence of iodide, the structural basis of the activation is not well understood. We have examined the effects of pH and iodide concentration on the catalytic activity and the structure of LPO. Electrochemical and colorimetric assays have shown that the catalytic activity is maximized at pH 4.5. The heme Soret absorption band exhibits a small red‐shift at pH 5.0 upon acidification, which is ascribable to a structural transition from a neutral to an acidic form. Resonance Raman spectra suggest that the heme porphyrin core is slightly contracted and the Fe‐His bond is strengthened in the acidic form compared to the neutral form. The structural change of LPO upon activation at acidic pH is similar to that observed for myeloperoxidase, another mammalian heme peroxidase, upon activation at neutral pH. Binding of iodide enhances the catalytic activity of LPO without affecting either the optimum pH of activity or the heme structure, implying that the iodide binding occurs at a protein site away from the heme‐linked protonation site. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 113–120, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Characterization of the G‐quadruplex structure of a catalytic DNA with peroxidase activity

It has been reported that the complexes formed by hemin and some G‐quadruplexes can be developed as a new class of DNAzyme with peroxidase activity. This kind of DNAzyme has received a great deal of attention. But to date, the actual G‐quadruplex structure that can provide hemin with enhanced peroxidase activity is in doubt. Herein, the G‐quadruplex structure of CatG4, a 21‐nucleotide DNA oligomer which was previously reported to bind hemin and the resulting complex exhibiting enhanced peroxidase activity, was characterized by fluorescence and circular dichroism measurements. The results suggest that the catalytically active form of CatG4 may be a unimolecular parallel quadruplex rather than a unimolecular chair‐type antiparallel quadruplex or a multistranded parallel quadruplex. In addition, the fluorescence analysis of labeled oligonucleotides may be developed as a supplementary tool for the study of DNA conformations. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 331–339, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com