Glutathione‐stabilized Cu nanocluster‐based fluorescent probe for sensitive and selective detection of Hg2+ in water

In this paper, an innovative and facile one‐pot method for synthesizing water‐soluble and stable fluorescent Cu nanoclusters (CuNCs), in which glutathione (GSH) served as protecting ligand and ascorbic acid (AA) as reducing agent was reported. The resultant CuNCs emitted blue‐green fluorescence at 440 nm, with a quantum yield (QD) of about 3.08%. In addition, the prepared CuNCs exhibited excellent properties such as good water solubility, photostability and high stability toward high ionic strength. On the basis of the selective quenching of Hg²⁺ on CuNCs fluorescence, which may be the result of Hg²⁺ ion‐induced aggregation of the CuNCs, the CuNCs was used for the selective and sensitive determination of Hg²⁺ in aqueous solution. The proposed analytical strategy permitted detection of Hg²⁺ in a linear range of 4 × 10^?8 to 6 × 10^?5 M, with a detection limit of 2.2 × 10^?8 M. Eventually, the practicability of this sensing approach was confirmed by its successful application to assay Hg²⁺ in tap water, Lotus lake water and river water samples with the quantitative spike recoveries ranging from 96.9% to 105.4%.     

Highly selective determination of phenolphthalein by flow injection chemiluminescence method based on a molecular imprinting polymer

The phenolphthalein‐imprinted polymer was prepared with methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross‐linker. Taking advantage of the quenching effect of phenolphthalein on the potassium permanganate–HCl–anhydrous alcohol chemiluminescence system, a new model was established to determine phenolphthalein by a highly selective flow injection chemiluminescence method. The traditional flow‐though cell was replaced with a novel flow path using a Y‐shaped polymethyl methacrylate column, through which the three reactants were injected simultaneously. The linear range of this assay was from 1.0 × 10^?8 to 1.0 × 10^?6 g/mL (r = 0.9978). The limit of detection was 8.9 × 10^?9 g/mL. The relative standard deviation for the determination of 1.0 × 10^?8 g/mL phenolphthalein solution was below 2.9% (n = 11). The proposed method was applied to the determination of phenolphthalein in real samples with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluorescence sensing of nitric oxide in aqueous solution by triethanolamine‐modified CdSe quantum dots

The water‐soluble luminescent CdSe quantum dots were prepared by ligand exchange with triethanolamine (TEA). Oxygen can reversibly enhance the fluorescence of the synthesized quantum dots (TEA‐CdSe‐QDs) in aqueous solution. Nitric oxide radical (NO) can react easily with dissolved oxygen in water and was found to have a significant quenching effect on the fluorescence of the TEA‐CdSe‐QDs. The fluorescence responses were concentration‐dependent and can be well described by the typical Stern–Volmer equation. A good linear relationship (R² = 0.9963) was observed over the range 5.92 × 10^?7 to 1.85 × 10^?5 mol/L nitric oxide. Above this concentration was a second linear region ranging from 2.12 × 10^?5 to 1.12 × 10^?4 mol/L NO with a gentler slope. The detection limit, calculated following the 3σ IUPAC criteria, was 3.02 × 10^?7 mol/L. The interference effect of some common interferents such as nitrite (NO₂^?), nitrate (NO₃^?), glucose and l ‐ascorbic acid on the detection of NO was negligible for the proposed system, demonstrating the potential utility of this probe for the detection of NO in biological systems. The possible mechanism was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

The fluorescence enhancement of quercetin–nucleic acid system and the analytical application

Nucleic acid can greatly enhance the fluorescence intensity of quercetin in HMTA‐HCl (pH 5.5) buffer. The enhanced intensity is in proportion to the concentration of nucleic acids in the range 5.0 × 10^?9 to 1.0 × 10^?6 g/mL for fsDNA, 5.0 × 10^?9 to 7.0 × 10^?7 g/mL for ctDNA and 5.0 × 10^?9 to 1.0 × 10^?6 g/mL for yRNA, and their detection limits (S/N = 3) are 3.5 × 10^?9, 7.8 × 10^?10 and 2.6 × 10^?9 g/mL, respectively. In comparison with most reported fluorescent probes for the determination of nucleic acids, the proposed probe has higher sensitivity and lower toxicity. The interaction investigation indicates that quercetin binds with double‐strand DNA in groove binding mode, resulting in fluorescence enhancement of this system. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluorescence modulation of 1,7‐bis(4‐hydroxy‐3‐methoxyphenyl)‐1,6‐heptadiene‐3,5‐dione by silver nanoparticles and its possible analytical application

The effects of silver nanoparticles on the photophysical properties of 1,7‐bis(4‐hydroxy‐3‐methoxyphenyl)‐1,6‐heptadiene‐3,5‐dione, popularly known as curcumin, have been investigated using optical absorption and fluorescence techniques. Although absorption spectroscopy suggests a ground‐state complex formation, fluorescence quenching data confirms a simultaneous static and dynamic quenching, inferring ground as well as excited‐state complex formation. The recovery of fluorescence quenching of the curcumin–silver nanoparticle complex in the presence of ascorbic acid or uric acid emphasizes a strong interaction between the silver nanoparticles and ascorbic acid/uric acid, suggesting that fluorescence recovery after the quenching of curcumin–silver nanoparticle complexes has potential for ascorbic acid or uric acid assay development. Copyright © 2011 John Wiley & Sons, Ltd.     

A Visualized Assay for Quercetin Based on the Formation of Silver–Gold Alloy Nanoparticles

A visualized assay for quercetin (QU) was first developed based on the formation of silver–gold alloy nanoparticles in this contribution. With the ability to reduce metal ions to metal substances, QU could reduce Ag⁺ absorbed on the surface of gold nanoparticles to metallic silver. The thickness of the formed Ag shell and the color change of the solution were proportional to the concentration of QU. Therefore, visualized detection of QU could be realized by studying the surface resonance plasmon absorption spectra of the analytical systems after addition of different concentration of QU. Under optimum conditions, trace amount of QU could be detected in the linear range 9.0?×?10^?7–1.0?×?10^?4 mol L^?1 with a detection limit of 6.5?×?10^?7 mol L^?1. The present assay was applied in the determination of QU in human serum and satisfactory results were obtained. This assay is simple, rapid, and cost-effective, and it is a powerful complement for the spectroscopy assays for QU. Also, it is the first visualized spectroscopic assay of QU until now.     

Interaction of glucose‐derived carbon quantum dots with silver and gold nanoparticles and its application for the fluorescence detection of 6‐thioguanine

The interaction of glucose‐derived carbon quantum dots (CQDs) with silver (Ag) and gold (Au) nanoparticles (NPs) was explored by fluorescence spectroscopy. Both metal NPs cause an efficient quenching of CQD fluorescence, which is likely due to the energy transfer process between CQDs as donors and metal NPs as acceptors. The Stern–Volmer plots were evaluated and corresponding quenching constants were found to be 1.9 × 10¹⁰ and 2.2 × 10⁸ M^?1 for AgNPs and AuNPs, respectively. The analytical applicability of these systems was demonstrated for turn‐on fluorescence detection of the anti‐cancer drug, 6‐thioguanine. Because the CQD–AgNP system had much higher sensitivity than the CQD–AuNP system, we used it as a selective fluorescence probe in a turn‐on assay of 6‐thioguanine. Under optimum conditions, the calibration graph was linear from 0.03 to 1.0 μM with a detection limit of 0.01 μM. The developed method was applied to the analysis of human plasma samples with satisfactory results.     

A novel gaseous dimethylamine sensor utilizing cataluminescence on zirconia nanoparticles

A novel cataluminescence (CTL) sensor using ZrO₂ nanoparticles as the sensing material was developed for the determination of trace dimethylamine in air samples based on the catalytic chemiluminescence (CL) of dimethylamine on the surface of ZrO₂ nanoparticles. The CTL characteristics and the different factors on the signal intensity for the sensor, including nanomaterials, working temperature, wavelength and airflow rate, were investigated in detail. The CL intensity on ZrO₂ nanoparticles was the strongest among the seven examined catalysts. This novel CL sensor showed high sensitivity and selectivity to gaseous dimethylamine at optimal temperature of 330°C. Quantitative analysis was performed at a wavelength of 620 nm. The linear range of CTL intensity vs concentration of gaseous dimethylamine was 4.71 × 10^?3 to 7.07 × 10^?2 mg L^?1 (r = 0.9928) with a detection limit (3σ) of 6.47 × 10^?4 mg L^?1. No or only very low levels of interference were observed while the foreign substances such as benzene, hydrochloric acid, methylbenzene, chloroform, n‐hexane and water vapor were passing through the sensor. The response time of the sensor was less than 50 s, and the sensor had a long lifetime of more than 60 h. The sensor was successfully applied to the determination of dimethylamine in artificial air samples, and could potentially be applied to analysis of nerve agents such as Tabun (GA). Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence behaviour of CdTe–potassium permanganate enhanced by sodium hexametaphosphate and sensitized sensing of l‐ascorbic acid

A highly sensitive flow‐injection chemiluminescence (FIA‐CL) method based on the CdTe nanocrystals and potassium permanganate chemiluminescence system was developed for the determination of l ‐ascorbic acid. It was found that sodium hexametaphosphate (SP), as an enhancer, could increase the chemiluminescence (CL) emission from the redox reaction of CdTe quantum dots with potassium permanganate in near‐neutral pH conditions. l ‐Ascorbic acid is suggested as a sensitive enhancer for use in the above energy‐transfer excitation process. Under optimal conditions, the calibration graph of emission intensity against logarithmic l ‐ascorbic acid concentration was linear in the range 1.0 × 10^?9–5.0 × 10^?6 mol/L, with a correlation coefficient of 0.9969 and relative standard deviation (RSD) of 2.3% (n = 7) at 5.0 × 10^?7 mol/L. The method was successfully used to determine l ‐ascorbic acid in vitamin C tablets. The possible mechanism of the chemiluminescence in the system is also discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of folic acid by high‐performance liquid chromatography with direct electrogenerated chemiluminescence reaction

In our present work, it was found that the electrooxidation of folic acid (FA) was accompanied by electrogenerated chemiluminescence (ECL) emission. Out of the four inorganic salts, NaNO₃ solution was found to be a suitable supporting electrolyte for the ECL emission of FA. Coupled with high‐performance liquid chromatography separation, this simple ECL method was used for post‐column determination of FA. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of FA in the range of 1.0 × 10^?7 to 1.0 × 10^?5 g/mL and the detection limit was 5 × 10^?8 g/mL (signal‐to‐noise ratio = 3). Application of the present method to the analysis of FA in human urine proved feasible. Copyright © 2009 John Wiley & Sons, Ltd.     

BSA‐conjugated zinc oxide nanoparticles as luminescent probes for the determination of histidine

Zinc oxide nanoparticles doped with bovine serum albumin were used to determine histidine in aqueous solutions using a fluorescence spectroscopic technique. The results showed that histidine effectively quenched the fluorescence of the modified ZnO nanoparticles, whereas other amino acids did not significantly affect the light emission, thereby allowing selective and sensitive histidine detection in amino acid mixtures. Under optimal conditions (pH 7.0, 25 °C, 10 min preincubation), the detection limit for histidine was ~ 9.87 × 10^–7 mol/L. The high value of the determined quenching rate constant K_q (3.30 × 10¹³ L/mol/s) was consistent with a static quenching mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

Enhancing Diamond Fluorescence via Optimized Nanorod Dimer Configurations

Light extraction from silicon (SiV) and nitrogen (NV) vacancy diamond color centers coupled to plasmonic silver and gold nanorod dimers was numerically improved. Numerical optimization of the coupled dipolar emitter—plasmonic nanorod dimer configurations was realized to attain the highest possible fluorescence enhancement by simultaneously improving the color centers excitation and emission through antenna resonances. Conditional optimization was performed by setting a criterion regarding the minimum quantum efficiency of the coupled system (cQE) to minimize losses. By comparing restricted symmetric and allowed asymmetric dimers, the advantages of larger degrees of freedom achievable in asymmetric configurations was proven. The highest 2.59?×?10⁸ fluorescence enhancement was achieved with 46.08% cQE via NV color center coupled to an asymmetric silver dimer. This is 3.17-times larger than the 8.19?×?10⁷ enhancement in corresponding symmetric silver dimer configuration, which has larger 68.52% cQE. Among coupled SiV color centers the highest 1.04?×?10⁸ fluorescence enhancement was achieved via asymmetric silver dimer with 37.83% cQE. This is 1.06-times larger than the 9.83?×?10⁷ enhancement in corresponding symmetric silver dimer configuration, which has larger 57.46% cQE. Among gold nanorod coupled configurations the highest fluorescence enhancement of 4.75?×?10⁴ was shown for SiV color center coupled to an asymmetric dimer with 21.8% cQE. The attained enhancement is 8.48- (92.42-) times larger than the 5.6?×?10³ (5.14?×?10²) fluorescence enhancement achievable via symmetric (asymmetric) gold nanorod dimer coupled to SiV (NV) color center, which is accompanied by 16.01% (7.66%) cQE.     

Synthesis of nano‐sized hydrogen phosphate‐imprinted polymer in acetonitrile/water mixture and its use as a recognition element of hydrogen phosphate selective all‐solid state potentiometric electrode

Herein, a new recipe is introduced for the preparation of hydrogen phosphate ion‐imprinted polymer nanoparticles (nano‐IIP) in acetonitrile/water (63.5:36.5) using phosphoric acid as the template. The nano‐IIP obtained was used as the recognition element of a carbon paste potentiometric sensor. The IIP electrode showed a Nernstian response to hydrogen phosphate anion; whereas, the non‐imprinted polymer (NIP)‐based electrode had no considerable sensitivity to the anion. The presence of both methacrylic acid and vinyl pyridine in the IIP structure, as well as optimization of the functional monomers‐template proportion, was found to be important to observe the sensing capability of the IIP electrode. The nano‐IIP electrode showed a dynamic linear range of 1 × 10^?5‐1 × 10^?1 mol L‐1, Nernstian slope of 30.6 ± (0.5) mV decade ^?1, response time of 25 seconds, and detection limit of 4.0 × 10^?6 mol L^?1. The utility of the electrodes was checked by potentiometric titration of hydrogen phosphate with La³⁺ solution.     

Temperature‐controlled down‐conversion luminescence behavior of Eu3+‐doped transparent MF2 (M = Ba,Ca, Sr) glass ceramics

Eu³⁺‐doped transparent glass ceramics containing MF₂ (M = Ba, Ca, Sr) nanocrystals were fabricated using a melt–quenching method, and the resulting structures were studied using X‐ray diffraction. Levels ⁵D₁ and ⁵D₀ of Eu³⁺ ions were verified as thermally coupled levels using the fluorescence intensity ratio method. The fluorescence intensity ratios, optical temperature sensitivity and thermal quenching ratios of the transparent glass ceramics were studied as a function of temperature. With an increase in temperature, the relative sensitivity (S _R) decreased sharply at first, then slowly increased, before finally decreasing. The minimum S _R values of GCBaF₂ (GCB), GCCaF₂ (GCC) and GCSrF₂ (GCS) were 2.8 × 10^?4, 0.8 × 10^?4 and 1.9 × 10^?4 K^?1 at 360, 269 and 319 K, respectively. Glass ceramics with an intense emission intensity can be used to convert the measured spectrum into temperature and may have an important role in temperature detectors.     

Chiral determination of cinchonine using an electrochemiluminescent sensor with molecularly imprinted membrane on the surfaces of magnetic particles

A novel molecular imprinting electrochemiluminescence sensor for detecting chiral cinchonine molecules was developed with a molecularly imprinted polymer membrane on the surfaces of magnetic microspheres. Fe₃O₄@Au nanoparticles modified with 6‐mercapto‐beta‐cyclodextrin were used as a carrier, cinchonine as a template molecule, methacrylic acid as a functional monomer and N ,N ′‐methylenebisacrylamide as a cross‐linking agent. Cinchonine was specifically recognized by the 6‐mercapto‐beta‐cyclodextrin functional molecularly imprinted polymer and detected based on enhancement of the electrochemiluminescence intensity caused by the reaction of tertiary amino structures of cinchonine molecules with Ru(bpy)₃²⁺. Cinchonine concentrations of 1 × 10^?10 to 4 × 10^?7 mol/L showed a good linear relationship with changes of the electrochemiluminescence intensity, and the detection limit of the sensor was 3.13 × 10^?11 mol/L. The sensor has high sensitivity and selectivity, and is easy to renew. It was designed for detecting serum samples, with recovery rates of 98.2% to 107.6%.     

Potentiometric glucose determination in human serum samples with glucose oxidase biosensor based on iodide electrode

Glucose potentiometric biosensor was prepared by immobilizing glucose oxidase on iodide-selective electrode. The hydrogen peroxide formed after the oxidation of glucose catalysed by glucose oxidase (GOD) was oxidized by sodium molybdate (SMo) at iodide electrode in the presence of dichlorometane. The glucose concentration was calculated from the decrease of iodide concentration determined by iodide-selective sensor. The sensitivity of glucose biosensor towards iodide ions and glucose was in the concentration ranges of 1.0 × 10^?1–1.0 × 10^?6 M and 1.0 × 10^?2?1.0 × 10^?4 M, respectively. The characterization of proposed glucose biosensor and glucose assay in human serum were also investigated.     

Probing the intermolecular interactions into serum albumin and anthraquinone systems: a spectroscopic and docking approach

Intermolecular interaction study of human serum albumin (HSA) with two anthraquinones i.e. danthron and quinizarin has been performed through fluorescence, UV-vis and CD spectroscopy along with docking analysis. The titration of drugs into HSA solution brought about the quenching of fluorescence emission by way of complex formation. The binding constants were found to be 1.51 × 10⁴ L mol^?1 and 1.70 × 10⁴ L mol^?1 at λ_exc = 280 nm while at λ_exc = 295 nm, the values of binding constants were 1.81 × 10⁴ L mol^?1 and 1.90 × 10⁴ L mol^?1 which hinted toward binding of both the drugs in the vicinity of subdomain IIA. Different temperature study revealed the presence of static quenching mechanism. Moreover, more effective quenching of the fluorescence emission was observed at λ_exc = 295 nm which also suggested that both the drug molecule bind nearer to Trp-214. Thermodynamic parameters showed that hydrophobic interaction was the major force behind the binding of drugs. The UV-vis spectroscopy testified the formation of complex in both the systems and primary quenching mechanism as static one. The changes in secondary structure and α-helicity in both the systems were observed by circular dichroism spectroscopy. Furthermore, molecular docking analysis predicted the probable binding site of drugs in subdomain IIA of HSA molecule. The types of amino acid residues surrounding the drug molecule advocated that van der Waals forces, hydrophobic forces and electrostatic forces played a vital role in the stabilization of drug-protein complex formed.     

Determination of dipyridamole using TCPO–H2O2 chemiluminescence in the presence of silver nanoparticles

The method is based on the fact that dipyridamole can enhance the chemiluminescence (CL) emission from the redox reaction of bis (2,4,6‐tricholorophenyl) oxalate (TCPO) with H₂O₂ in the presence of silver nanoparticles (AgNPs). The CL reaction mechanism was discussed. The effect of concentrations of TCPO, H₂O₂, AgNPs and pH value on the CL reaction were investigated. Under the optimum conditions, the linear dynamic range was 1.0–1000 × 10^?9 g/mL and the detection limit (3σ) was 9 × 10^?10 g/mL. The relative standard deviation (RSD) was 4.8% for 1.0 × 10^?9 g/mL dipyridamole (n = 7). The proposed method has been successfully applied to the determination of dipyridamole tablets and the recovery was 99–103%. Copyright © 2011 John Wiley & Sons, Ltd.