Human cathelicidin peptide LL37 inhibits both attachment capability and biofilm formation of Staphylococcus epidermidis

Aims: The aim of this work was to investigate the possible effect of human cathelicidin antimicrobial peptide LL37 on biofilm formation of Staphylococcus epidermidis, a major causative agent of indwelling device‐related infections. Methods and Results: We performed initial attachment assay and biofilm formation solid surface assay in microtitre plates, as well as growth experiment in liquid medium using laboratory strain Staph. epidermidis ATCC35984. We found that already a low concentration of the peptide LL37 (1 mg l^?1) significantly decreased both the attachment of bacteria to the surface and also the biofilm mass. No growth inhibition was observed even at 16 mg l^?1 concentration of LL37, indicating a direct effect of the peptide on biofilm production. Conclusions: As biofilm protects bacteria during infections in humans and allows their survival in a hostile environment, inhibition of biofilm formation by LL37 may have a key role to prevent bacterial colonization on indwelling devices. Significance and Impact of the Study: Our findings suggest that this host defence factor can be a potential candidate in prevention and treatment strategies of Staph. epidermidis infections in humans.     

Multi‐species nitrifying biofilm model (MSNBM) including free ammonia and free nitrous acid inhibition and oxygen limitation

A multi‐species nitrifying biofilm model (MSNBM) is developed to describe nitrite accumulation by simultaneous free ammonia (FA) and free nitrous acid (FNA) inhibition, direct pH inhibition, and oxygen limitation in a biofilm. The MSNBM addresses the spatial gradient of pH with biofilm depth and how it induces changes of FA and FNA speciation and inhibition. Simulations using the MSNBM in a completely mixed biofilm reactor show that influent total ammonia nitrogen (TAN) concentration, bulk dissolved oxygen (DO) concentration, and buffer concentration exert significant control on the suppression of nitrite‐oxidizing bacteria (NOB) and shortcut biological nitrogen removal (SBNR), but the pH in the bulk liquid has a weaker influence. Ammonium oxidation increases the nitrite concentration and decreases the pH, which together can increase FNA inhibition of NOB in the biofilm. Thus, a low buffer concentration can accentuate SBNR. DO and influent TAN concentrations are efficient means to enhance DO limitation, which affects NOB more than ammonia‐oxidizing bacteria (AOB) inside the biofilm. With high influent TAN concentration, FA inhibition is dominant at an early phase, but finally DO limitation becomes more important as TAN degradation and biofilm growth proceed. MSNBM results indicate that oxygen depletion and FNA inhibition throughout the biofilm continuously suppress the growth of NOB, which helps achieve SBNR with a lower TAN concentration than in systems without concentration gradients. Biotechnol. Bioeng. 2010;105: 1115–1130. © 2009 Wiley Periodicals, Inc.     

Characterization of a modified rotating disk reactor for the cultivation of Staphylococcus epidermidis biofilm

Aims: The purpose of this study was to develop a system that would allow biofilms to be cultivated under strictly defined conditions in terms of dissolved oxygen, fluid shear and to assess whether the method was suitable for the detection of respiratory activity stratification in biofilm samples. Methods: The system is a modified version a commercially available laboratory biofilm reactor and incorporates a number of features such as the provision of defined levels of dissolved oxygen, constant average shear, enhanced gas–liquid mass transfer, aseptic operation and the ability to remove biofilm for ex situ analysis during or after continuous cultivation. Conclusions: The system was shown to be effective for the characterization of the effects of dissolved oxygen on a pure culture of Staphylococcus epidermidis. The versatility of the system offers the potential for cultivating pure culture biofilm in defined, controlled conditions and facilitates a range of analyses that can be performed ex situ. Significance and Impact of the Study: The ability to provide strict regulation of environmental conditions and enhanced transfer of oxygen to the biofilm during cultivation are important, first because oxygen is known to regulate biofilm development in several micro‐organisms and second because many conventional biofilm cultivation systems may not provide adequate oxygen supply to the biofilm.     

群体感应抑制剂对海洋生态功能菌生物膜形成的影响

[目的]研究天然群体感应抑制剂(Quorum sensing inhibitors,QSI)分子对海洋生态功能菌生物膜形成的影响.[方法]以对污损生物幼虫附着具有诱导作用的海洋细菌为目标菌,通过在其生物膜的形成过程中添加天然群体感应抑制剂,研究其对目标菌成膜细菌数和浮游细菌数、生物膜形态以及生物膜表面胞外多糖含量的影响.[结果]呋喃酮和吡啶在50 mg/L时,对8株目标菌的成膜有显著的抑制作用,抑制率在80％左右,吲哚、青霉烷酸和香豆素在较高浓度800 mg/L才有比较好的抑制活性.生长抑制实验结果显示,同等浓度下,QSI分子对目标菌成膜的抑制活性明显高于其对浮游细菌生长的抑制活性.结果表明,QSI分子主要通过干扰目标菌群体感应系统以抑制生物膜的形成.[结论]研究证实QSI分子在海洋菌生物膜形成过程中具有一定的调控作用.通过添加QSI可能能够间接抑制由生物膜诱导的污损生物附着,从而以新的角度研制新型抗污损物质.     

A comparative study of biofilm formation by Shiga toxigenic Escherichia coli using epifluorescence microscopy on stainless steel and a microtitre plate method

Attachment of Shiga toxigenic Escherichia coli (STEC) to surfaces and the formation of biofilms may enhance persistence in a food processing environment and present a risk of contaminating products. Seven strains of STEC and three non-STEC strains were selected to compare two biofilm quantification methods; epifluorescence microscopy on stainless steel (SS) and a microtitre plate assay. The influence of prior growth in planktonic (nutrient broth) and sessile (nutrient agar) culture on biofilm production, as well as expression of surface structures and the possession of antigen 43 (encoded by agn43) on biofilm formation were also investigated. Biofilms were produced in diluted nutrient broth at 25 degrees C for 24 and 48 h. Curli expression was determined using congo red indicator agar, while the presence of agn43 was determined using polymerase chain reaction. No correlation was found between counts for epifluorescence microscopy on SS and the absorbance values obtained with the microtitre plate method for planktonic and sessile grown cultures. Different abilities of individual STEC strains to attach to SS and microtitre plates were found with some strains attaching better to each surface following growth in either planktonic or sessile culture. All O157 STEC strains had low biofilm counts on SS for planktonic and sessile grown cultures; however, one STEC O157:H- strain (EC516) had significantly greater (p<0.05) biofilm production on microtitre plates compared to the other O157 STEC strains. EC516 and other STEC (O174:H21 and O91:H21) strains expressing curli fimbriae were found to produce significantly greater (p<0.05) biofilms on microtitre plates compared to the non-curli expressing strains. No relationship was found between the production of type-I fimbriae, motility, agn43 and bacterial physicochemical properties (previously determined) and biofilm formation on SS or microtitre plates. Variations between the two biofilm determination methods may suggest that the biofilm production on microtitre plates may not be appropriate to represent other surfaces such as SS and that caution should be taken when selecting a method to quantify biofilm production on a surface.     

Effect of 2-hydroxyethyl methacrylate on Streptococcus spp. biofilms

Aims: The effect of different concentrations of 2‐hydroxyethyl methacrylate (HEMA) was evaluated on biofilm formation and preformed biofilm of Streptococcus mitis, Streptococcus mutans and Streptococcus oralis, alone or combined to each other. Methods and Results: Twofold serial dilution of HEMA ranged from 12 to 0·75 mmol l^?1 was added to Streptococcal broth cultures and mature biofilms in 96‐well‐microtitre plates to evaluate bacterial biomass and cell viability. HEMA affected the Streptococcal population in a strain‐specific way producing few significant effects. A reduction on biofilm formation and a detachment of preformed biofilm was recorded in Strep. mitis ATCC 6249, whereas in mixed cultures, the monomer expressed a general aggregative effect on mature biofilms. A reduction in cell viability was also recorded in an HEMA‐concentration‐dependent way in each experimental condition studied. Conclusions: These results suggest that the HEMA prevalent effects are both the reduction of bacterial adhesion to a polystyrene surface and the increase in dead cells also characterized by an aggregative status. Significance and Impact of the Study: Understanding the potential effect of HEMA, released from resin‐based materials, on oral bacteria may furnish information for surveillance of the risk reduction in secondary caries via hindering biofilm generation.     

In vitro effect of pH and ethanol on biofilm formation by clinicalica-positiveStaphylococcus epidermidis strains

Biofilm production is an important step in the pathogenesis ofStaphylococcus epidermidis associated biomaterial infections.Staphylococcus epidermidis strains isolated from dialysis fluid (n=9) and needle cultures (n=14) were phenotyped and genotyped for extracellular polysaccharide production and were examined for their ability to produce slime in a medium at various pH levels (3, 5, 7, 9 and 12) and with ethanol supplementation (0, 2, 5, 10 and 15%) using a semi-quantitative adherence assay. A total of 23 clinicalicaADBC positiveS. epidermidis, one reference strain (S. epidermidis CIP 106510) used as positive control, and oneicaADBC negative strain (E21) were investigated. Qualitative biofilm production analysis revealed that 15 of the 23icaADBC positive strains (65.21%) produced slime on Congo Red agar plates. Quantitative biofilm was determined by measuring the optical density at 570 nm (OD₅₇₀). The results show that the slime production depended on the pH value of the medium and the ethanol concentration. At highly acidic (pH 3) and alkaline (pH 12) levels, the OD₅₇₀ was lower, while at pH 7 the adhesion was moderate. In addition the cells adhered strongly with 2% ethanol than with the other concentrations. Our results suggest that pH and ethanol were stress factors that led toS. epidermidis biofilm formation and also play a possible role in the pathogenesis of biomaterial-related infections.     

Physiological studies of the Pediococcus pentosaceus biofilm

Pediococcus pentosaceus, a bacterium recently used in human and animal probiotics, was used in combination with supports made from polylactic acid composite soybean meal was used to study biofilm formation, and it was found that dense biofilms developed by Day 1. Proteomic comparison between planktonic and biofilm cultures of P. pentosaceus showed distinct expression patterns of intracellular and extracellular proteins. Type I glyceraldehyde-3-phosphate dehydrogenase was upregulated in biofilm cultures and mediated cell adhesion and encouraged biofilm production. GMP synthase, which regulates GMP synthesis and acts as an intracellular signal molecule to control cell mechanisms and has been exploited in the development of new therapeutic agents, was also upregulated in the biofilm mode of growth. The present work serves as a basis for future studies examining the complex network of systems that regulate lactic acid bacterial (LAB) biofilm formation and can serve as a framework for studies of production of therapeutic agents from LAB.     

Hydrophobin coating prevents Staphylococcus epidermidis biofilm formation on different surfaces

Staphylococcus epidermidis is a significant nosocomial pathogen in predisposed hosts because of its capability of forming a biofilm on indwelling medical devices. The initial stage of biofilm formation has a key role in S. epidermidis abiotic surface colonization. Recently, many strategies have been developed to create new anti-biofilm surfaces able to control bacterial adhesion mechanisms. In this work, the self-assembled amphiphilic layers formed by two fungal hydrophobins (Vmh2 and Pac3) have proven to be able to reduce the biofilm formed by different strains of S. epidermidis on polystyrene surfaces. The reduction in the biofilm thickness on the coated surfaces and the preservation of cell vitality have been demonstrated through confocal laser scanning microscope analysis. Moreover, the anti-biofilm efficiency of the self-assembled layers on different medically relevant materials has also been demonstrated using a CDC biofilm reactor.     

Linoleic acid inhibits Pseudomonas aeruginosa biofilm formation by activating diffusible signal factor‐mediated quorum sensing

Bacterial biofilm formation causes serious problems in various fields of medical, clinical, and industrial settings. Antibiotics and biocide treatments are typical methods used to remove bacterial biofilms, but biofilms are difficult to remove effectively from surfaces due to their increased resistance. An alternative approach to treatment with antimicrobial agents is using biofilm inhibitors that regulate biofilm development without inhibiting bacterial growth. In the present study, we found that linoleic acid (LA), a plant unsaturated fatty acid, inhibits biofilm formation under static and continuous conditions without inhibiting the growth of Pseudomonas aeruginosa. LA also influenced the bacterial motility, extracellular polymeric substance production, and biofilm dispersion by decreasing the intracellular cyclic diguanylate concentration through increased phosphodiesterase activity. Furthermore, quantitative gene expression analysis demonstrated that LA induced the expression of genes associated with diffusible signaling factor‐mediated quorum sensing that can inhibit or induce the dispersion of P. aeruginosa biofilms. These results suggest that LA is functionally and structurally similar to a P. aeruginosa diffusible signaling factor (cis‐2‐decenoic acid) and, in turn, act as an agonist molecule in biofilm dispersion.     

Prevention of biofilm formation by polymer modification

Bacterial biofilm formation on synthetic polymers plays an important role in industry and in modern medicine, leading, for example, to difficult-to-treat infections caused by colonized foreign bodies. Prevention of biofilm formation is a necessary step in the successful prophylaxis of such infections. One approach is to inhibit bacterial adherence by polymer surface modification. We have investigated polymer modification by glow discharge treatment in order to study the influence of the modified surface on bacterial adherence. Surface roughness, surface charge density and contact angles of the modified polymers were determined and related to the adherence ofStaphylococcus epidermidis KH6. Although no influence of surface roughness and charge density on bacterial adherence was noticed, a correlation between the free enthalpy of adhesion (estimated from contact angle measurements) and adherence was observed. There seems to exist a certain minimum bacterial adherence, independent of the nature of the polymer surface. Modified polymers with negative surface charge allow for bacterial adherence close to the adherence minimum. These polymers could be improved further by the ionic bonding of silver ions to the surface. Such antimicrobial polymers are able to prevent bacterial colonization, which is a prerequisite for biofilm formation. It is suggested that modification of polymers and subsequent surface coupling of antimicrobials might be an effective approach for the prevention of bacterial biofilm formation.     

sarA negatively regulates Staphylococcus epidermidis biofilm formation by modulating expression of 1 MDa extracellular matrix binding protein and autolysis‐dependent release of eDNA

Biofilm formation is essential for Staphylococcus epidermidis pathogenicity in implant‐associated infections. Nonetheless, large proportions of invasive Staphylococcus epidermidis isolates fail to form a biofilm in vitro. We here tested the hypothesis that this apparent paradox is related to the existence of superimposed regulatory systems suppressing a multicellular biofilm life style in vitro. Transposon mutagenesis of clinical significant but biofilm‐negative S. epidermidis 1585 was used to isolate a biofilm positive mutant carrying a Tn917 insertion in sarA, chief regulator of staphylococcal virulence. Genetic analysis revealed that inactivation of sarA induced biofilm formation via overexpression of the giant 1 MDa extracellular matrix binding protein (Embp), serving as an intercellular adhesin. In addition to Embp, increased extracellular DNA (eDNA) release significantly contributed to biofilm formation in mutant 1585ΔsarA. Increased eDNA amounts indirectly resulted from upregulation of metalloprotease SepA, leading to boosted processing of autolysin AtlE, in turn inducing augmented autolysis and release of eDNA. Hence, this study identifies sarA as a negative regulator of Embp‐ and eDNA‐dependent biofilm formation. Given the importance of SarA as a positive regulator of polysaccharide mediated cell aggregation, the regulator enables S. epidermidis to switch between mechanisms of biofilm formation, ensuring S. epidermidis adaptation to hostile environments.     

Mathematical model for a three-phase fluidized bed biofilm reactor in wastewater treatment

A mathematical model for a three phase fluidized bed bioreactor (TFBBR) was proposed to describe oxygen utilization rate, biomass concentration and the removal efficiency of Chemical Oxygen Demand (COD) in wastewater treatment. The model consisted of the biofilm model to describe the oxygen uptake rate and the hydraulic model to describe flow characteristics to cause the oxygen distribution in the reactor. The biofilm model represented the oxygen uptake rate by individual bioparticle and the hydrodynamics of fluids presented an axial dispersion flow with back mixing in the liquid phase and a plug flow in the gas phase. The difference of settling velocity along the column height due to the distributions of size and number of bioparticle was considered. The proposed model was able to predict the biomass concentration and the dissolved oxygen concentration along the column height. The removal efficiency of COD was calculated based on the oxygen consumption amounts that were obtained from the dissolved oxygen concentration. The predicted oxygen concentration by the proposed model agreed reasonably well with experimental measurement in a TFBBR. The effects of various operating parameters on the oxygen concentration were simulated based on the proposed model. The media size and media density affected the performance of a TFBBR. The dissolved oxygen concentration was significantly affected by the superficial liquid velocity but the removal efficiency of COD was significantly affected by the superficial gas velocity. An erratum to this article can be found online at .     

Effect of honey on Streptococcus mutans growth and biofilm formation

Because of the tradition of using honey as an antimicrobial medicament, we investigated the effect of natural honey (NH) on Streptococcus mutans growth, viability, and biofilm formation compared to that of an artificial honey (AH). AH contained the sugars at the concentrations reported for NH. NH and AH concentrations were obtained by serial dilution with tryptic soy broth (TSB). Several concentrations of NH and AH were tested for inhibition of bacterial growth, viability, and biofilm formation after inoculation with S. mutans UA159 in 96-well microtiter plates to obtain absorbance and CFU values. Overall, NH supported significantly less (P < 0.05) bacterial growth than AH at 25 and 12.5% concentrations. At 50 and 25% concentrations, both honey groups provided significantly less bacterial growth and biofilm formation than the TSB control. For bacterial viability, the results for all honey concentrations except 50% NH were not significantly different from those for the TSB control. NH was able to decrease the maximum velocity of S. mutans growth compared to AH. In summary, NH demonstrated more inhibition of bacterial growth, viability, and biofilm formation than AH. This study highlights the potential antibacterial properties of NH and could suggest that the antimicrobial mechanism of NH is not solely due to its high sugar content.     

Characterization of Bordetella pertussis growing as biofilm by chemical analysis and FT-IR spectroscopy

Although Bordetella pertussis, the etiologic agent of whooping cough, adheres and grows on the ciliated epithelium of the respiratory tract, it has been extensively studied only in liquid cultures. In this work, the phenotypic expression of B. pertussis in biofilm growth is described as a first approximation of events that may occur in the colonization of the host. The biofilm developed on polypropylene beads was monitored by chemical methods and Fourier transform infrared (FT-IR) spectroscopy. Analysis of cell envelopes revealed minimal differences in outer membrane protein (OMP) pattern and no variation of lipopolysaccharide (LPS) expression in biofilm compared with planktonically grown cells. Sessile cells exhibited a 2.4- to 3.0-fold higher carbohydrate/protein ratio compared with different types of planktonic cells. A 1.8-fold increased polysaccharide content with significantly increased hydrophilic characteristics was observed. FT-IR spectra of the biofilm cells showed higher intensity in the absorption bands assigned to polysaccharides (1,200–900 cm⁻¹ region) and vibrational modes of carboxylate groups (1,627, 1,405, and 1,373 cm⁻¹) compared with the spectra of planktonic cells. In the biofilm matrix, uronic-acid-containing polysaccharides, proteins, and LPS were detected. The production of extracellular carbohydrates during biofilm growth was not associated with changes in the specific growth rate, growth phase, or oxygen limitation. It could represent an additional virulence factor that may help B. pertussis to evade host defenses.     

Violacein and biofilm production in Janthinobacterium lividum

AIMS: To analyse the environmental stimuli modulating violacein and biofilm production in Janthinobacterium lividum. METHODS AND RESULTS: Violacein and biofilm production by J. lividum DSM1522(T) was assayed in different growth conditions. Our data suggest that violacein and biofilm production is controlled by the carbon source, being inhibited by glucose and enhanced by glycerol. J. lividum produced violacein also in the presence of different sub-inhibitory concentrations of ampicillin. As opposite, the production of N-acylhomoserine lactone(s), quorum sensing regulators was shown to be positively regulated by glucose. Moreover, violacein-producing cultures of J. lividum showed higher CFU counts than violacein-nonproducing ones. CONCLUSIONS: Taken together, our results suggest that violacein and biofilm production could be regulated by a common metabolic pathway and that violacein as well as biofilm could represent a response to environmental stresses and a key factor in the survival mechanisms of J. lividum. SIGNIFICANCE AND IMPACT OF THE STUDY: Although several recent studies disclosed a number of interesting biological properties of violacein, few data are reported on the physiologic function of violacein in J. lividum. This paper adds new information on the complex mechanisms allowing and regulating bacterial life in hostile environments.     

The metalloprotease SepA governs processing of accumulation‐associated protein and shapes intercellular adhesive surface properties in Staphylococcus epidermidis

The otherwise harmless skin inhabitant Staphylococcus epidermidis is a major cause of healthcare‐associated medical device infections. The species' selective pathogenic potential depends on its production of surface adherent biofilms. The Cell wall‐anchored protein Aap promotes biofilm formation in S. epidermidis, independently from the polysaccharide intercellular adhesin PIA. Aap requires proteolytic cleavage to act as an intercellular adhesin. Whether and which staphylococcal proteases account for Aap processing is yet unknown. Here, evidence is provided that in PIA‐negative S. epidermidis 1457Δica, the metalloprotease SepA is required for Aap‐dependent S. epidermidis biofilm formation in static and dynamic biofilm models. qRT‐PCR and protease activity assays demonstrated that under standard growth conditions, sepA is repressed by the global regulator SarA. Inactivation of sarA increased SepA production, and in turn augmented biofilm formation. Genetic and biochemical analyses demonstrated that SepA‐related induction of biofilm accumulation resulted from enhanced Aap processing. Studies using recombinant proteins demonstrated that SepA is able to cleave the A domain of Aap at residue 335 and between the A and B domains at residue 601. This study identifies the mechanism behind Aap‐mediated biofilm maturation, and also demonstrates a novel role for a secreted staphylococcal protease as a requirement for the development of a biofilm.     

Analysis of biofilm bacterial communities responsible for carbon removal through a reactor cascade treating wastewater

In this study molecular microbiological and multivariate statistical analyses were carried out to determine the structure and dynamics of bacterial communities through a biofilm based, pilot-scale wastewater treatment cascade system comprised of eight reactors. Results indicated a vertical as well as horizontal differentiation of biofilm bacterial communities within individual reactors and through the reactor series, respectively. The richness of biofilm samples taken from dissolved oxygen rich sections of reactors were relatively lower than of samples taken from less oxygenized sections (one-way ANOVA P = 0.07). The Euclidean distance based one-way ANOSIM pointed out that in bacteriological point of view: (1) no statistically significant difference could be observed among the first five reactors (P ≥ 0.1); (2) the first seven reactors differed significantly from the last reactor, (P ≤ 0.03); (3) reactors 1 and 2 differed significantly from reactors 6 and 7 (P ≈ 0.02) and (4) reactor 3 from reactor 7 (P ≈ 0.03). 16S rRNA gene cloning revealed that through the cascade system the initially dominant heterotrophic bacteria (Acinetobacter, Acidovorax, Parabacteroides, Thauera, Desulfobacterium and Desulfomicrobium) were gradually replaced or supplemented by autotrophic nitrifying bacteria (Nitrosomonas, ‘Candidatus Nitrotoga’ and Nitrospira). Our results indicate that the vertical alteration of bacterial community structure within a particular reactor was driven by the alteration of dissolved oxygen concentration, while the horizontal alteration of bacterial community structure through the cascade system was driven mainly by the gradually decreasing dissolved organic matter content and increasing dissolved oxygen concentration.     

A multi-phase mathematical model of quorum sensing in a maturing Pseudomonas aeruginosa biofilm

It is well known that sessile bacteria have a strong tendency to exist in a biofilm phenotype, whereby bacterial cells aggregate and produce a gel-like extracellular matrix, which, in an infection scenario, offers a significant barrier to attack by conventional antibiotics and the immune system. In this paper we develop a multi-phase model of a maturing Pseudomonas aeruginosa biofilm, allowing for the production and secretion of exopolysaccharide (EPS). The primary quorum-sensing system of P. aeruginosa (namely the lasR system) is believed to be required for full biofilm development, and we thus take the synthesis of EPS to be regulated by the cognate signal molecule, 3-oxo-C12-HSL. We also take EPS and signal production, along with bacterial growth, to be limited by oxygen availability, thus factoring in the nutrient poor conditions deep inside the biofilm. We use simulations to examine the role played by quorum sensing in the biofilm maturation process, and to investigate the effect of anti-quorum sensing and antibiotic treatments on EPS concentration, signal level, bacterial numbers and biofilm growth rate. In addition, we undertake analysis of the associated travelling-wave behaviour.     

Quorum sensing disruption regulates hydrolytic enzyme and biofilm production in estuarine bacteria

Biofilms of heterotrophic bacteria cover organic matter aggregates and constitute hotspots of mineralization, primarily acting through extracellular hydrolytic enzyme production. Nevertheless, regulation of both biofilm and hydrolytic enzyme synthesis remains poorly investigated, especially in estuarine ecosystems. In this study, various bioassays, mass spectrometry and genomics approaches were combined to test the possible involvement of quorum sensing (QS) in these mechanisms. QS is a bacterial cell–cell communication system that relies notably on the emission of N-acylhomoserine lactones (AHLs). In our estuarine bacterial collection, we found that 28 strains (9%), mainly Vibrio, Pseudomonas and Acinetobacter isolates, produced at least 14 different types of AHLs encoded by various luxI genes. We then inhibited the AHL QS circuits of those 28 strains using a broad-spectrum lactonase preparation and tested whether biofilm production as well as β-glucosidase and leucine-aminopeptidase activities were impacted. Interestingly, we recorded contrasted responses, as biofilm production, dissolved and cell-bound β-glucosidase and leucine-aminopeptidase activities significantly increased in 4%–68% of strains but decreased in 0%–21% of strains. These findings highlight the key role of AHL-based QS in estuarine bacterial physiology and ultimately on biogeochemical cycles. They also point out the complexity of QS regulations within natural microbial assemblages.