Electricity generation from glucose by a Klebsiella sp. in microbial fuel cells

As electrochemically active bacteria play an important role in microbial fuel cells (MFCs), it is necessary to get a comprehensive understanding of their electrogenesis mechanisms. In this study, a new electrochemically active bacterium, Klebsiella sp. ME17, was employed into an “H” typed MFC for electrogenesis, with glucose as the electron donor. The maximum power density was 1,209 mW/m² at a resistance of 340 Ω and the maximum current was 1.47 mA. Given the original anode medium, fresh medium, and the supernatant of the anode medium in the same MFC, respectively, the polarization curves illustrated that the strain produced mediators to promote extracellular electron transfer. The anode medium supernatant was electrochemically active, based on cyclic voltammogram, and the supernatant was very likely to contain quinone-like substances, as indicated by spectrophotometric and excitation–emission matrix fluorescence spectroscopy analysis. Further investigation on the color and ultraviolet absorbance at 254 nm of the filtered anode medium showed that the redox states of mediators strongly associated with the electricity generation states in MFCs.     

Gaseous pollutant treatment and electricity generation in microbial fuel cells (MFCs) utilising redox mediators

Microbial fuel cell (MFC) is an emerging technology for sustainable energy generation and waste treatment. This paper reviews the potential of a gaseous substrate when it is combined with a mediator in an MFC to generate electricity and to treat toxic gaseous pollutants. Most MFCs for waste water treatment often cannot use mediator to enhance the electron transfer from the microbe to the anode because of the difficulty in recovering the expensive and potentially toxic compound. Combining gas feeds with mediators is possible since the soluble mediator would remain in the anode chamber as the gas passes through the reactor. In addition, this type of MFC is possible to be integrated into an anaerobic biofiltration system (BF-MFC), where the biofilter removes the gaseous contaminant and produces the reduced mediator and the MFC produces the electricity and recycles the reoxidised mediator. This paper also talks about the past research on gaseous feed MFCs, and reviews the mechanism and strategies of electron transfer in MFC using redox mediator. The advantages, process parameters and challenges of BF-MFC are discussed. This knowledge is very much required in the design and scale up of BF-MFC. This paper will be useful for those who work in the area of gaseous pollutant treatment and electricity generation.     

Electrochemical analysis of Clostridium propionicum and its acrylic acid production in microbial fuel cells

Currently, acrylic acid is produced at a low yield by the resting cells of Clostridium propionicum with the supplement of extra electron acceptors. As an alternative way, acrylic acid production coupled with electricity generation was achieved by C. propionicum‐based microbial fuel cells (MFCs). Electricity was generated in the salt‐bridge MFCs with cysteine and resazurin in the anode chamber as mediators, and K₃Fe(CN)₆ as the cathode electron acceptor. Power generation was 21.78 mW/m² with an internal resistance of 9809 Ω. Cyclic voltammograms indicated the main mechanism of power production was the electron transfer facilitated by mediators in the system. In the salt‐bridge MFC system, 0.694 mM acrylic acid was produced together with electricity generation.     

Microbial fuel cells: novel biotechnology for energy generation

Microbial fuel cells (MFCs) provide new opportunities for the sustainable production of energy from biodegradable, reduced compounds. MFCs function on different carbohydrates but also on complex substrates present in wastewaters. As yet there is limited information available about the energy metabolism and nature of the bacteria using the anode as electron acceptor; few electron transfer mechanisms have been established unequivocally. To optimize and develop energy production by MFCs fully this knowledge is essential. Depending on the operational parameters of the MFC, different metabolic pathways are used by the bacteria. This determines the selection and performance of specific organisms. Here we discuss how bacteria use an anode as an electron acceptor and to what extent they generate electrical output. The MFC technology is evaluated relative to current alternatives for energy generation.     

Layer-by-layer construction of graphene-based microbial fuel cell for improved power generation and methyl orange removal

Development of highly efficient anode is critical for enhancing the power output of microbial fuel cells (MFCs). The aim of this work is to investigate whether modification of carbon paper (CP) anode with graphene (GR) via layer-by-layer assembly technique is an effective approach to promote the electricity generation and methyl orange removal in MFCs. Using cyclic voltammetry and electrochemical impedance spectroscopy, the GR/CP electrode exhibited better electrochemical behavior. Scanning electron microscopy results revealed that the surface roughness of GR/CP increased, which was favorable for more bacteria to attach to the anode surface. The MFCs equipped with GR/CP anode achieved a stable maximum power density of 368 mW m^?2 under 1,000 Ω external resistance and a start time for the initial maximum voltage of 180 h, which were, respectively, 51 % higher and 31 % shorter than the corresponding values of the MFCs with blank anode. The anode and cathode polarization curves revealed negligible difference in cathode potentials but obviously difference in anode potentials, indicating that the GR-modified anode other than the cathode was responsible for the performance improvement of MFC. Meanwhile, compared with MFCs with blank anode, 11 % higher decolorization efficiency and 16 % higher the chemical oxygen demand removal rate were achieved in MFC with GR-modified anode during electricity generation. This study might provide an effective way to modify the anode for enhanced electricity generation and efficient removal of azo dye in MFCs.     

Performance and microbial ecology of air-cathode microbial fuel cells with layered electrode assemblies

Microbial fuel cells (MFCs) can be built with layered electrode assemblies, where the anode, proton exchange membrane (PEM), and cathode are pressed into a single unit. We studied the performance and microbial community structure of MFCs with layered assemblies, addressing the effect of materials and oxygen crossover on the community structure. Four MFCs with layered assemblies were constructed using Nafion or Ultrex PEMs and a plain carbon cloth electrode or a cathode with an oxygen-resistant polytetrafluoroethylene diffusion layer. The MFC with Nafion PEM and cathode diffusion layer achieved the highest power density, 381 mW/m² (20 W/m³). The rates of oxygen diffusion from cathode to anode were three times higher in the MFCs with plain cathodes compared to those with diffusion-layer cathodes. Microsensor studies revealed little accumulation of oxygen within the anode cloth. However, the abundance of bacteria known to use oxygen as an electron acceptor, but not known to have exoelectrogenic activity, was greater in MFCs with plain cathodes. The MFCs with diffusion-layer cathodes had high abundance of exoelectrogenic bacteria within the genus Geobacter. This work suggests that cathode materials can significantly influence oxygen crossover and the relative abundance of exoelectrogenic bacteria on the anode, while PEM materials have little influence on anode community structure. Our results show that oxygen crossover can significantly decrease the performance of air-cathode MFCs with layered assemblies, and therefore limiting crossover may be of particular importance for these types of MFCs.     

New exoelectrogen Citrobacter sp. SX-1 isolated from a microbial fuel cell

Aims: Isolation, identification and characterization of a new exoelectrogenic bacterium from a microbial fuel cell (MFC). Methods and Results: Exoelectrogenic bacterial strain SX‐1 was isolated from a mediator‐less MFC by conventional plating techniques with ferric citrate as electron acceptor under anaerobic condition. Phylogenetic analysis of the 16S rDNA sequence revealed that it was related to the members of Citrobacter genus with Citrobacter sp. sdy‐48 being the most closely related species. The bacterial strain SX‐1 produced electricity from citrate, acetate, glucose, sucrose, glycerol and lactose in MFCs with the highest current density of 205 mA m^?2 generated from citrate. Cyclic voltammetry analysis indicated that membrane‐associated proteins may play an important role in facilitating the electrons transferring from bacteria to electrode. Conclusions: This is the first study that demonstrates that Citrobacter species can transfer electrons to extracellular electron acceptors. Citrobacter strain SX‐1 is capable of generating electricity from a wide range of substrates in MFCs. Significance and Impact of the Study: This finding increases the known diversity of power generating exoelectrogens and provided a new strain to explore the mechanisms of extracellular electron transfer from bacteria to electrode. The wide range of substrate utilization by SX‐1 increases the application potential of MFCs in renewable energy generation and waste treatment.     

Continuous power generation and microbial community structure of the anode biofilms in a three-stage microbial fuel cell system

A mediator-less three-stage two-chamber microbial fuel cell (MFC) system was developed and operated continuously for more than 1.5 years to evaluate continuous power generation while treating artificial wastewater containing glucose (10 mM) concurrently. A stable power density of 28 W/m³ was attained with an anode hydraulic retention time of 4.5 h and phosphate buffer as the cathode electrolyte. An overall dissolved organic carbon removal ratio was about 85%, and coulombic efficiency was about 46% in this MFC system. We also analyzed the microbial community structure of anode biofilms in each MFC. Since the environment in each MFC was different due to passing on the products to the next MFC in series, the microbial community structure was different accordingly. The anode biofilm in the first MFC consisted mainly of bacteria belonging to the Gammaproteobacteria, identified as Aeromonas sp., while the Firmicutes dominated the anode biofilms in the second and third MFCs that were mainly fed with acetate. Cyclic voltammetric results supported the presence of a redox compound(s) associated with the anode biofilm matrix, rather than mobile (dissolved) forms, which could be responsible for the electron transfer to the anode. Scanning electron microscopy revealed that the anode biofilms were comprised of morphologically different cells that were firmly attached on the anode surface and interconnected each other with anchor-like filamentous appendages, which might support the results of cyclic voltammetry. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Air-cathode structure optimization in separator-coupled microbial fuel cells

Microbial fuel cells (MFC) with 30% wet-proofed air cathodes have previously been optimized to have 4 diffusion layers (DLs) in order to limit oxygen transfer into the anode chamber and optimize performance. Newer MFC designs that allow close electrode spacing have a separator that can also reduce oxygen transfer into the anode chamber, and there are many types of carbon wet-proofed materials available. Additional analysis of conditions that optimize performance is therefore needed for separator-coupled MFCs in terms of the number of DLs and the percent of wet proofing used for the cathode. The number of DLs on a 50% wet-proofed carbon cloth cathode significantly affected MFC performance, with the maximum power density decreasing from 1427 to 855 mW/m² for 1–4 DLs. A commonly used cathode (30% wet-proofed, 4 DLs) produced a maximum power density (988 mW/m²) that was 31% less than that produced by the 50% wet-proofed cathode (1 DL). It was shown that the cathode performance with different materials and numbers of DLs was directly related to conditions that increased oxygen transfer. The coulombic efficiency (CE) was more affected by the current density than the oxygen transfer coefficient for the cathode. MFCs with the 50% wet-proofed cathode (2 DLs) had a CE of >84% (6.8 A/m²), which was substantially larger than that previously obtained using carbon cloth air-cathodes lacking separators. These results demonstrate that MFCs constructed with separators should have the minimum number of DLs that prevent water leakage and maximize oxygen transfer to the cathode.     

The effect of physico-chemically immobilized methylene blue and neutral red on the anode of microbial fuel cell

A fast and cost effective immobilization of electron carriers, methylene blue (MB) and neutral red (NR) by pH shift was proposed to improve bioanodic performance. The adsorption of mediators onto the carbon cloth anode was verified using cyclic voltammogram (CV) and the effect of the immobilized mediators on acclimation, power density, and acetate removal of MFCs was investigated. A peak power density of P _max(MB) = 11.3 W/m³ was achieved over days 110 ∼ 120, as compared to P _max(Control) = 5.4 W/m³ and P _max(NR) = 3.1 W/m³ for the treated anode after 15 sequential fed-batch operations. The VFA removal rates however were similar for all MFC systems, ranging from 82 to 87%. It could be suggested that the increase in power density for the MB treated electrode resulted from an enhanced electron transport from exo-electrogenic bacteria. MB may also have a selective effect on the bacterial community during the start-up stage, increasing the voltage production and acetate removal from day 1 to 16. However, MFC with NR treated anode produced an initial voltage under 100 mV, with lower coulombic efficiency (CE). NR exhibited less favourable mediator molecule binding to the electrode surface, when subject to pH driven physico-chemical immobilization.     

Effect of electron mediators on current generation and fermentation in a microbial fuel cell

Effects of select electron mediators [9,10-anthraquinone-2,6-disulfonic acid disodium salt (AQDS), safranine O, resazurin, methylene blue, and humic acids] on metabolic end-products and current production from cellulose digestion by Clostridium cellulolyticum in microbial fuel cells (MFCs) were studied using capillary electrophoresis and traditional electrochemical techniques. Addition of the mediator resazurin greatly enhanced current production but did not appear to alter the examined fermentation end-products compared to MFCs with no mediator. Assays for lactate, acetate, and ethanol indicate that the presence of safranine O, methylene blue, and humic acids alters metabolite production in the MFC: safranine O decreased the examined metabolites, methylene blue increased lactate formation, and humic acids increased the examined metabolites. Mediator standard redox potentials (E ₀) reported in the literature do not coincide with redox potentials in MFCs due presumably to the electrolytic complexity of media that supports bacterial survival and growth. Current production in MFCs: (1) can be effected by the mediator redox potential while in the media, which may be significantly shifted from E ₀, and (2) depended on the ability of the mediator to access the bacterial electron source, which may be cytoplasmic. In addition, some electron mediators had significant effects on metabolic end-products and therefore the metabolism of the organism itself. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Power generation from cellulose using mixed and pure cultures of cellulose-degrading bacteria in a microbial fuel cell

Microbial fuel cells (MFCs) have been used to generate electricity from various organic compounds such as acetate, glucose, and lactate. We demonstrate here that electricity can be produced in an MFC using cellulose as the electron donor source. Tests were conducted using two-chambered MFCs, the anode medium was inoculated with mixed or pure culture of cellulose-degrading bacteria Nocardiopsis sp. KNU (S strain) or Streptomyces enissocaesilis KNU (K strain), and the catholyte in the cathode compartment was 50mM ferricyanide as catholyte. The power density for the mixed culture was 0.188mW (188mW/m(2)) at a current of 0.5mA when 1g/L cellulose was used. However, the power density decreased as the cellulose concentration in the anode compartment decreased. The columbic efficiencies (CEs) ranged from 41.5 to 33.4%, corresponding to an initial cellulose concentration of 0.1-1.0g/L. For the pure culture, cellobioase enzyme was added to increase the conversion of cellulose to simple sugars, since electricity production is very low. The power densities for S and K strain pure cultures with cellobioase were 162mW/m(2) and 145mW/m(2), respectively. Cyclic voltammetry (CV) experiments showed the presence of peaks at 380, 500, and 720mV vs. Ag/AgCl for the mixed bacterial culture, indicating its electrochemical activity without an external mediator. Furthermore, this MFC system employs a unique microbial ecology in which both the electron donor (cellulose) and the electron acceptor (carbon paper) are insoluble.     

Recent progress in electrodes for microbial fuel cells

The performance and cost of electrodes are the most important aspects in the design of microbial fuel cell (MFC) reactors. A wide range of electrode materials and configurations have been tested and developed in recent years to improve MFC performance and lower material cost. As well, anodic electrode surface modifications have been widely used to improve bacterial adhesion and electron transfer from bacteria to the electrode surface. In this paper, a review of recent advances in electrode material and a configuration of both the anode and cathode in MFCs are provided. The advantages and drawbacks of these electrodes, in terms of their conductivity, surface properties, biocompatibility, and cost are analyzed, and the modification methods for the anodic electrode are summarized. Finally, to achieve improvements and the commercial use of MFCs, the challenges and prospects of future electrode development are briefly discussed.     

Generation of electric potential difference across the electrodes of the microbial fuel cell in the anaerobic oxidation of substrates by microbial associations

Several microbial associations were obtained from natural and anthropogenic sources. All of the associations grow well on glucose and significantly worse on acetate. We observed 80–95% glucose consumption during 3–5 days of growth. The oxidation of substrates by the cultures generates an electric potential difference between anode and cathode electrodes of a microbial fuel cell (MFC). The value of the potential difference depends on the nature of the association and the substrate and reaches 400–500 mV. The potential difference generation accompanied by a shift to the negative region of the medium redox potential (E _h ) to — (400–500) mV. This indicates H₂ evolution by the association cultures during oxidation of carbohydrates. Artificial redox mediators, such as tetramethyl-p-phenylenediamine, phenazine methosulfate, and benzyl viologen, were able to increase up to 15% the difference in electrical potential across the electrodes of the MFC. It is assumed that an increase in the potential difference across the electrodes induced by the redox mediators is due to their direct involvement in the transfer of electrons from the bacteria in the incubation medium to the MFC anode electrode. The direct measurement of current and potential difference on the electrodes in a short-circuit mode shows that the internal resistance of the MFC is equal to 1 kΩ and the power reaches 5 μW. Undoubtedly, this testifies to the low efficiency developed by the MFE.     

Thionine increases electricity generation from microbial fuel cell using Saccharomyces cerevisiae and exoelectrogenic mixed culture

Microbial fuel cells (MFCs) have been shown to be capable of clean energy production through the oxidation of biodegradable organic waste using various bacterial species as biocatalysts. In this study we found Saccharomyces cerevisiae, previously known electrochemcially inactive or less active species, can be acclimated with an electron mediator thionine for electrogenic biofilm formation in MFC, and electricity production is improved with facilitation of electron transfer. Power generation of MFC was also significantly increased by thionine with both aerated and non-aerated cathode. With electrochemically active biofilm enriched with swine wastewater, MFC power increased more significantly by addition of thionine. The optimum mediator concentration was 500 mM of thionine with S. cerevisae in MFC with the maximum voltage and current generation in the microbial fuel cell were 420 mV and 700 mA/m(2), respectively. Cyclic voltametry shows that thionine improves oxidizing and reducing capability in both pure culture and acclimated biofilm as compared to non-mediated cell. The results obtained indicated that thionine has great potential to enhance power generation from unmediated yeast or electrochemically active biofilm in MFC.     

Electricity generation from cellulose by rumen microorganisms in microbial fuel cells

In microbial fuel cells (MFCs) bacteria generate electricity by mediating the oxidation of organic compounds and transferring the resulting electrons to an anode electrode. The objective of this study was to test the possibility of generating electricity with rumen microorganisms as biocatalysts and cellulose as the electron donor in two-compartment MFCs. The anode and cathode chambers were separated by a proton exchange membrane and graphite plates were used as electrodes. The medium in the anode chamber was inoculated with rumen microorganisms, and the catholyte in the cathode compartment was ferricyanide solution. Maximum power density reached 55 mW/m(2) (1.5 mA, 313 mV) with cellulose as the electron donor. Cellulose hydrolysis and electrode reduction were shown to support the production of current. The electrical current was sustained for over 2 months with periodic cellulose addition. Clarified rumen fluid and a soluble carbohydrate mixture, serving as the electron donors, could also sustain power output. Denaturing gradient gel electrophoresis (DGGE) of PCR amplified 16S rRNA genes revealed that the microbial communities differed when different substrates were used in the MFCs. The anode-attached and the suspended consortia were shown to be different within the same MFC. Cloning and sequencing analysis of 16S rRNA genes indicated that the most predominant bacteria in the anode-attached consortia were related to Clostridium spp., while Comamonas spp. abounded in the suspended consortia. The results demonstrated that electricity can be generated from cellulose by exploiting rumen microorganisms as biocatalysts, but both technical and biological optimization is needed to maximize power output.     

Characterization of electrochemical activity of a strain ISO2‐3 phylogenetically related to Aeromonas sp. isolated from a glucose‐fed microbial fuel cell

The microbial communities associated with electrodes in closed and open circuit microbial fuel cells (MFCs) fed with glucose were analyzed by 16S rRNA approach and compared. The comparison revealed that bacteria affiliated with the Aeromonas sp. within the Gammaproteobacteria constituted the major population in the closed circuit MFC (harvesting electricity) and considered to play important roles in current generation. We, therefore, attempted to isolate the dominant bacteria from the anode biofilm, successfully isolated a Fe (III)‐reducing bacterium phylogenetically related to Aeromonas sp. and designated as strain ISO2‐3. The isolated strain ISO2‐3 could grow and concomitantly produce current (max. 0.24 A/m²) via oxidation of glucose or hydrogen with an electrode serving as the sole electron acceptor. The strain could ferment glucose, but generate less electrical current. Cyclic voltammetry supported the strain ISO2‐3 was electrically active and likely to transfer electrons to the electrode though membrane‐associated compounds (most likely c‐type cytochrome). This mechanism requires intimate contact with the anode surface. Scanning electron microscopy revealed that the strain ISO2‐3 developed multiplayer biofilms on the anode surface and also produced anchor‐like filamentous appendages (most likely pili) that may promote long‐range electron transport across the thick biofilm. Biotechnol. Bioeng. 2009; 104: 901–910. © 2009 Wiley Periodicals, Inc.     

Impact of initial biofilm growth on the anode impedance of microbial fuel cells

Electrochemical impedance spectroscopy (EIS) was used to study the behavior of a microbial fuel cell (MFC) during initial biofilm growth in an acetate-fed, two-chamber MFC system with ferricyanide in the cathode. EIS experiments were performed both on the full cell (between cathode and anode) as well as on individual electrodes. The Nyquist plots of the EIS data were fitted with an equivalent electrical circuit to estimate the contributions of various intrinsic resistances to the overall internal MFC impedance. During initial development of the anode biofilm, the anode polarization resistance was found to decrease by over 70% at open circuit and by over 45% at 27 microA/cm(2), and a simultaneous increase in power density by about 120% was observed. The exchange current density for the bio-electrochemical reaction on the anode was estimated to be in the range of 40-60 nA/cm(2) for an immature biofilm after 5 days of closed circuit operation, which increased to around 182 nA/cm(2) after more than 3 weeks of operation and stable performance in an identical parallel system. The polarization resistance of the anode was 30-40 times higher than that of the ferricyanide cathode for the conditions tested, even with an established biofilm. For a two-chamber MFC system with a Nafion 117 membrane and an inter-electrode spacing of 15 cm, the membrane and electrolyte solution dominate the ohmic resistance and contribute to over 95% of the MFC internal impedance. Detailed EIS analyses provide new insights into the dominant kinetic resistance of the anode bio-electrochemical reaction and its influence on the overall power output of the MFC system, even in the high internal resistance system used in this study. These results suggest that new strategies to address this kinetic constraint of the anode bio-electrochemical reactions are needed to complement the reduction of ohmic resistance in modern designs.     

Metabolites produced by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. enable a Gram-positive bacterium to achieve extracellular electron transfer

Previous studies revealed the abundance of Pseudomonas sp. in the microbial community of a microbial fuel cell (MFC). These bacteria can transfer electrons to the electrode via self-produced phenazine-based mediators. A MFC fed with acetate where several Pseudomonas sp. were present was found to be rich in a Gram-positive bacterium, identified as Brevibacillus sp. PTH1. Remarkably, MFCs operated with only the Brevibacillus strain in their anodes had poor electricity generation. Upon replacement of the anodic aqueous part of Brevibacillus containing MFCs with the cell-free anodic supernatants of MFCs operated with Pseudomonas sp. CMR12a, a strain producing considerable amounts of phenazine-1-carboxamide (PCN) and biosurfactants, the electricity generation was improved significantly. Supernatants of Pseudomonas sp. CMR12a_Reg, a regulatory mutant lacking the ability to produce PCN, had no similar improvement effect. Purified PCN, together with rhamnolipids as biosurfactants (1 mg L⁻¹), could clearly improve electricity generation by Brevibacillus sp. PTH1, as well as enable this bacterium to oxidize acetate with concomitant reduction of ferric iron, supplied as goethite (FeOOH). When added alone, PCN had no observable effects on Brevibacillus’ electron transfer. This work demonstrates that metabolites produced by Pseudomonas sp. enable Gram-positive bacteria to achieve extracellular electron transfer. Possibly, this bacterial interaction is a key process in the anodic electron transfer of a MFC, enabling Brevibacillus sp. PTH1 to achieve its dominance. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Increased Electrical Output when a Bacterial ABTS Oxidizer is Used in a Microbial Fuel Cell

Microbial fuel cells (MFCs) are a technology that provides electrical energy from the microbial oxidation of organic compounds. Most MFCs use oxygen as the oxidant in the cathode chamber. This study examined the formation in culture of an unidentified bacterial oxidant and investigated the performance of this oxidant in a two-chambered MFC with a proton exchange membrane and an uncoated carbon cathode. DNA, FAME profile and characterization studies identified the microorganism that produced the oxidant as Burkholderia cenocepacia. The oxidant was produced by log phase cells, oxidized the dye 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS), had a mass below 1 kD, was heat stable (121°C) and was soluble in ethanol. In a MFC with a 1000 Ω load and ABTS as a mediator, the oxidizer increased cell voltage 11 times higher than atmospheric oxygen and 2.9 times higher than that observed with ferricyanide in the cathode chamber. No increase in cell voltage was observed when no mediator was present. Organisms that produce and release oxidizers into the media may prove useful as bio-cathodes by improving the electrical output of MFCs.