Surface topography of membrane domains

Elucidating origin, composition, size, and lifetime of microdomains in biological membranes remains a major issue for the understanding of cell biology. For lipid domains, the lack of a direct access to the behaviour of samples at the mesoscopic scale has constituted for long a major obstacle to their characterization, even in simple model systems made of immiscible binary mixtures. By its capacity to image soft surfaces with a resolution that extends from the molecular to the microscopic level, in air as well as under liquid, atomic force microscopy (AFM) has filled this gap and has become an inescapable tool in the study of the surface topography of model membrane domains, the first essential step for the understanding of biomembranes organization. In this review we mainly focus on the type of information on lipid microdomains in model systems that only AFM can provide. We will also examine how AFM can contribute to understand data acquired by a variety of other techniques and present recent developments which might open new avenues in model and biomembrane AFM applications.     

An integrated instrumental setup for the combination of atomic force microscopy with optical spectroscopy

In recent years, the study of single biomolecules using fluorescence microscopy and atomic force microscopy (AFM) techniques has resulted in a plethora of new information regarding the physics underlying these complex biological systems. It is especially advantageous to be able to measure the optical, topographical, and mechanical properties of single molecules simultaneously. Here an AFM is used that is especially designed for integration with an inverted optical microscope and that has a near-infrared light source (850 nm) to eliminate interference between the optical experiment and the AFM operation. The Tip Assisted Optics (TAO) system consists of an additional 100 x 100-microm(2) X-Y scanner for the sample, which can be independently and simultaneously used with the AFM scanner. This allows the offset to be removed between the confocal optical image obtained with the sample scanner and the simultaneously acquired AFM topography image. The tip can be positioned exactly into the optical focus while the user can still navigate within the AFM image for imaging or manipulation of the sample. Thus the tip-enhancement effect can be maximized and it becomes possible to perform single molecule manipulation experiments within the focus of a confocal optical image. Here this is applied to simultaneous measurement of single quantum dot fluorescence and topography with high spatial resolution.     

Polymerase chain reaction of nanoparticle-bound primers

Using one or two primers respectively bound to the surface of Au nanoparticles (AuNPs) or magnetic nanoparticles (MNPs), polymerase chain reaction (PCR) based on nanoparticles was systemically studied, agarose gel electrophoresis and atomic force microscopy (AFM) were respectively used to detect and observe the PCR product. The results obtained indicated that with either one or two primers respectively bound to the nanoparticle surface, PCR can proceed successfully under optimized condition and is subject to certain rules, consequently a symmetric PCR technique and an asymmetric PCR technique based on nanoparticles have been developed. A kind of nanostructured aggregates can be constructed by a symmetric PCR using two nanoparticle-bound primers.     

PeakForce Tapping resolves individual microvilli on living cells

Microvilli are a common structure found on epithelial cells that increase the apical surface thus enhancing the transmembrane transport capacity and also serve as one of the cell's mechanosensors. These structures are composed of microfilaments and cytoplasm, covered by plasma membrane. Epithelial cell function is usually coupled to the density of microvilli and its individual size illustrated by diseases, in which microvilli degradation causes malabsorption and diarrhea. Atomic force microscopy (AFM) has been widely used to study the topography and morphology of living cells. Visualizing soft and flexible structures such as microvilli on the apical surface of a live cell has been very challenging because the native microvilli structures are displaced and deformed by the interaction with the probe. PeakForce Tapping® is an AFM imaging mode, which allows reducing tip–sample interactions in time (microseconds) and controlling force in the low pico‐Newton range. Data acquisition of this mode was optimized by using a newly developed PeakForce QNM‐Live Cell probe, having a short cantilever with a 17‐µm‐long tip that minimizes hydrodynamic effects between the cantilever and the sample surface. In this paper, we have demonstrated for the first time the visualization of the microvilli on living kidney cells with AFM using PeakForce Tapping. The structures observed display a force dependence representing either the whole microvilli or just the tips of the microvilli layer. Together, PeakForce Tapping allows force control in the low pico‐Newton range and enables the visualization of very soft and flexible structures on living cells under physiological conditions. © 2015 The Authors Journal of Molecular Recognition Published by John Wiley & Sons Ltd.     

AFM‐ and NSOM‐based force spectroscopy and distribution analysis of CD69 molecules on human CD4+ T cell membrane

Although CD69 is well known as an early T cell‐activation marker, the possibility that CD69 are distributed as nano‐structures on membrane for immune regulation during T cell activation has not been tested. In this study, nanoscale features of CD69 expression on activated T cells were determined using the atomic force microscopy (AFM) topographic and force‐binding nanotechnology as well as near‐field scanning optical microscopy (NSOM)‐/fluorescence quantum dot (QD)‐based nanosacle imaging. Unstimulated CD4⁺ T cells showed neglectable numbers of membrane CD69 spots binding to the CD69 Ab‐functinalized AFM tip, and no detectable QD‐bound CD69 as examined by NSOM/QD‐based imaging. In contrast, Phytohemagglutinin (PHA)‐activated CD4⁺ T cells expressed CD69, and displayed many force‐binding spots binding to the CD69 Ab‐functionalized AFM tip on about 45% of cell membrane, with mean binding‐rupture forces 276 ± 71 pN. Most CD69 molecules appeared to be expressed as 100–200 nm nanoclusters on the membrane of PHA‐activated CD4⁺ T cells. Meanwhile, NSOM/QD‐based nanoscale imaging showed that CD69 were non‐uniformly distributed as 80–200 nm nanoclusters on cell‐membrane of PHA‐activated CD4⁺ T cells. This study represents the first demonstration of the nano‐biology of CD69 expression during T cell activation. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous height and adhesion imaging of antibody-antigen interactions by atomic force microscopy.

Specific molecular recognition events, detected by atomic force microscopy (AFM), so far lack the detailed topographical information that is usually observed in AFM. We have modified our AFM such that, in combination with a recently developed method to measure antibody-antigen recognition on the single molecular level (Hinterdorfer, P., W. Baumgartner, H. J. Gruber, K. Schilcher, and H. Schindler, Proc. Natl. Acad. Sci. USA 93:3477-3481 (1996)), it allows imaging of a submonolayer of intercellular adhesion molecule-1 (ICAM-1) in adhesion mode. We demonstrate that for the first time the resolution of the topographical image in adhesion mode is only limited by tip convolution and thus comparable to tapping mode images. This is demonstrated by imaging of individual ICAM-1 antigens in both the tapping mode and the adhesion mode. The contrast in the adhesion image that was measured simultaneously with the topography is caused by recognition between individual antibody-antigen pairs. By comparing the high-resolution height image with the adhesion image, it is possible to show that specific molecular recognition is highly correlated with topography. The stability of the improved microscope enabled imaging with forces as low as 100 pN and ultrafast scan speed of 22 force curves per second. The analysis of force curves showed that reproducible unbinding events on subsequent scan lines could be measured.     

Structural and functional imaging with carbon nanotube AFM probes

Atomic force microscopy (AFM) has great potential as a tool for structural biology, a field in which there is increasing demand to characterize larger and more complex biomolecular systems. However, the poorly characterized silicon and silicon nitride probe tips currently employed in AFM limit its biological applications. Carbon nanotubes represent ideal AFM tip materials due to their small diameter, high aspect ratio, large Young's modulus, mechanical robustness, well-defined structure, and unique chemical properties. Nanotube probes were first fabricated by manual assembly, but more recent methods based on chemical vapor deposition provide higher resolution probes and are geared towards mass production, including recent developments that enable quantitative preparation of individual single-walled carbon nanotube tips [J. Phys. Chem. B 105 (2001) 743]. The high-resolution imaging capabilities of these nanotube AFM probes have been demonstrated on gold nanoparticles and well-characterized biomolecules such as IgG and GroES. Using the nanotube probes, new biological structures have been investigated in the areas of amyloid-beta protein aggregation and chromatin remodeling, and new biotechnologies have been developed such as AFM-based haplotyping. In addition to measuring topography, chemically functionalized AFM probes can measure the spatial arrangement of chemical functional groups in a sample. However, standard silicon and silicon nitride tips, once functionalized, do not yield sufficient resolution to allow combined structural and functional imaging of biomolecules. The unique end-group chemistry of carbon nanotubes, which can be arbitrarily modified by established chemical methods, has been exploited for chemical force microscopy, allowing single-molecule measurements with well-defined functionalized tips.     

Atomic force microscopy comes of age

AFM (atomic force microscopy) analysis, both of fixed cells, and live cells in physiological environments, is set to offer a step change in the research of cellular function. With the ability to map cell topography and morphology, provide structural details of surface proteins and their expression patterns and to detect pico‐Newton force interactions, AFM represents an exciting addition to the arsenal of the cell biologist. With the explosion of new applications, and the advent of combined instrumentation such as AFM—confocal systems, the biological application of AFM has come of age. The use of AFM in the area of biomedical research has been proposed for some time, and is one where a significant impact could be made. Fixed cell analysis provides qualitative and quantitative subcellular and surface data capable of revealing new biomarkers in medical pathologies. Image height and contrast, surface roughness, fractal, volume and force analysis provide a platform for the multiparameter analysis of cell and protein functions. Here, we review the current status of AFM in the field and discuss the important contribution AFM is poised to make in the understanding of biological systems.     

Submicron structure in L-alpha-dipalmitoylphosphatidylcholine monolayers and bilayers probed with confocal, atomic force, and near-field microscopy.

Langmuir-Blodgett (LB) monolayers and bilayers of L-alpha-dipalmitoylphosphatidylcholine (DPPC), fluorescently doped with 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (diIC18), are studied by confocal microscopy, atomic force microscopy (AFM), and near-field scanning optical microscopy (NSOM). Beyond the resolution limit of confocal microscopy, both AFM and NSOM measurements of mica-supported lipid monolayers reveal small domains on the submicron scale. In the NSOM studies, simultaneous high-resolution fluorescence and topography measurements of these structures confirm that they arise from coexisting liquid condensed (LC) and liquid expanded (LE) lipid phases, and not defects in the monolayer. AFM studies of bilayers formed by a combination of LB dipping and Langmuir-Schaefer monolayer transfer exhibit complex surface topographies that reflect a convolution of the phase structure present in each of the individual monolayers. NSOM fluorescence measurements, however, are able to resolve the underlying lipid domains from each side of the bilayer and show that they are qualitatively similar to those observed in the monolayers. The observation of the small lipid domains in these bilayers is beyond the spatial resolving power of confocal microscopy and is complicated in the topography measurements taken with AFM, illustrating the utility of NSOM for these types of studies. The data suggest that the small LC and LE lipid domains are formed after lipid transfer to the substrate through a dewetting mechanism. The possible extension of these measurements to probing for lipid phase domains in natural biomembranes is discussed.     

Atomic Force Microscopy of Red-Light Photoreceptors Using PeakForce Quantitative Nanomechanical Property Mapping

Atomic force microscopy (AFM) uses a pyramidal tip attached to a cantilever to probe the force response of a surface. The deflections of the tip can be measured to ~10 pN by a laser and sectored detector, which can be converted to image topography. Amplitude modulation or “tapping mode” AFM involves the probe making intermittent contact with the surface while oscillating at its resonant frequency to produce an image. Used in conjunction with a fluid cell, tapping-mode AFM enables the imaging of biological macromolecules such as proteins in physiologically relevant conditions. Tapping-mode AFM requires manual tuning of the probe and frequent adjustments of a multitude of scanning parameters which can be challenging for inexperienced users. To obtain high-quality images, these adjustments are the most time consuming.PeakForce Quantitative Nanomechanical Property Mapping (PF-QNM) produces an image by measuring a force response curve for every point of contact with the sample. With ScanAsyst software, PF-QNM can be automated. This software adjusts the set-point, drive frequency, scan rate, gains, and other important scanning parameters automatically for a given sample. Not only does this process protect both fragile probes and samples, it significantly reduces the time required to obtain high resolution images. PF-QNM is compatible for AFM imaging in fluid; therefore, it has extensive application for imaging biologically relevant materials.The method presented in this paper describes the application of PF-QNM to obtain images of a bacterial red-light photoreceptor, RpBphP3 (P3), from photosynthetic R. palustris in its light-adapted state. Using this method, individual protein dimers of P3 and aggregates of dimers have been observed on a mica surface in the presence of an imaging buffer. With appropriate adjustments to surface and/or solution concentration, this method may be generally applied to other biologically relevant macromolecules and soft materials.     

New technologies in scanning probe microscopy for studying molecular interactions in cells

Atomic force microscopy (AFM) is a specialised form of scanning probe microscopy, which was invented by Binnig and colleagues in 1986. Since then, AFM has been increasingly used to study biomedical problems. Because of its high resolution, AFM has been used to examine the topography or shape of surfaces, such as during the molecular imaging of proteins. This, combined with the ability to operate under known force regimes, makes AFM technology particularly useful for measuring intermolecular bond forces and assessing the mechanical properties of biological materials. Many of the constraints (e.g. complex instrumentation, slow acquisition speeds and poor vertical range) that previously limited the use of AFM in cell biology are now beginning to be resolved. Technological advances will enable AFM to challenge both confocal laser scanning microscopy and scanning electron microscopy as a method for carrying out three-dimensional imaging. Its use as both a precise micro-manipulator and a measurement tool will probably result in many novel and exciting applications in the future. In this article, we have reviewed some of the current biological applications of AFM, and illustrated these applications using studies of the cell biology of bone and integrin-mediated adhesion.     

Peptide‐mediated cell penetration and targeted delivery of gold nanoparticles into lysosomes

There is considerable interest in the sub‐cellular targeting and delivery of biomolecules, therapeutic and imaging agents, and nanoparticles and nanoparticle conjugates into organelles for therapeutic and imaging purposes. To date, a number of studies have used sorting peptides for targeted delivery of cargo into different cell organelles but not into lysosomes. In this study, the delivery of 13‐nm gold nanoparticles across the cell membrane followed by targeted localisation into the lysosomes of a mammalian cell line was examined using novel combinations of cell‐penetrating peptides and lysosomal sorting peptides conjugated to the nanoparticles. Using a combination of fluorescence spectroscopy, fluorescence microscopy and transmission electron microscopy techniques, we show that these nanoconjugates were efficiently and selectively delivered into the lysosomes with minimal cytotoxic effects. This novel targeted delivery system may underpin the development of a new strategy for the treatment of lysosomal storage diseases by exploiting the large surface area of nanoparticles to deliver drugs or replacement enzymes directly to the lysosomes. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Imaging mixed lipid monolayers by dynamic atomic force microscopy.

Phase imaging with tapping mode atomic force microscopy (AFM) and force modulation microscopy were used to probe the mechanical properties of phase-separated lipid monolayers made of a mixture (0.25:0.75) of the surface-active lipopeptide surfactin and of dipalmitoylphosphatidylcholine (DPPC). The pi-A isotherms and the result of a molecular modeling study revealed a loose, 2-D liquid-like organization for the surfactin molecules and a closely packed, 2-D solid-like organization for DPPC molecules. This difference in molecular organization was responsible for a significant contrast in height, tapping mode phase and force modulation amplitude images. Phase imaging at light tapping, i.e., with a ratio of the set-point tapping amplitude with respect to the free amplitude A(sp)/A(0) approximately 0.9, showed larger phase shifts on the solid-like DPPC domains attributed to larger Young's modulus. However, contrast inversion was observed for A(sp)/A(0)<0.7, suggesting that at moderate and hard tapping the image contrast was dominated by the probe-sample contact area. Surprisingly, force modulation amplitude images showed larger stiffness for the liquid-like surfactin domains, suggesting that the contrast was dominated by contact area effects rather than by Young's modulus. These data emphasize the complex nature of the contrast mechanisms of dynamic AFM images recorded on mixed lipid monolayers.     

Labeling of immune cells for in vivo imaging using magnetofluorescent nanoparticles

Observation of immune and stem cells in their native microenvironments requires the development of imaging agents to allow their in vivo tracking. We describe here the synthesis of magnetofluorescent nanoparticles for cell labeling in vitro and for multimodality imaging of administered cells in vivo. MION-47, a prototype monocrystalline iron oxide nanoparticle, was first converted to an intermediate bearing a fluorochrome and amine groups, then reacted with either HIV-Tat peptide or protamine to yield a nanoparticle with membrane-translocating properties. We describe how to assess optimal cell labeling with tests of cell phenotype and function. Synthesis of magnetofluorescent nanoparticles and cell-labeling optimization can be realized in 48 h, whereas nanoparticle uptakes and retention studies may generally take up to 120 h. Labeled cells can be detected by magnetic resonance imaging, fluorescence reflectance imaging, fluorescence-mediated tomography, confocal microscopy and flow cytometry, and can be purified based on their fluorescent or magnetic properties. The present protocol focuses on T-cell labeling but can be used for labeling a variety of circulating cells.     

Piezoelectric tuning fork probe for atomic force microscopy imaging and specific recognition force spectroscopy of an enzyme and its ligand

Piezoelectric quartz tuning fork has drawn the attention of many researchers for the development of new atomic force microscopy (AFM) self‐sensing probes. However, only few works have been done for soft biological materials imaging in air or aqueous conditions. The aim of this work was to demonstrate the efficiency of the AFM tuning fork probe to perform high‐resolution imaging of proteins and to study the specific interaction between a ligand and its receptor in aqueous media. Thus, a new kind of self‐sensing AFM sensor was introduced to realize imaging and biochemical specific recognition spectroscopy of glucose oxidase enzyme using a new chemical functionalization procedure of the metallic tips based on the electrochemical reduction of diazonium salt. This scanning probe as well as the functionalization strategy proved to be efficient respectively for the topography and force spectroscopy of soft biological materials in buffer conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Emerging Conductive Atomic Force Microscopy for Metal Halide Perovskite Materials and Solar Cells

Metal halide perovskite materials, benefiting from a combination of outstanding optoelectronic properties and low‐cost solution‐preparation processes, show tremendous potential for optoelectronics and photovoltaics. However, the nanoscale inhomogeneities of the electronic properties of perovskite materials cause a number of difficulties, such as recombination, stability, and hysteresis, all of which seriously restrict device performance. Scanning probe microscopy, as a high‐resolution imaging technique, has been widely used to connect local properties and micro‐area morphologies to overall device performance. Conductive atomic force microscopy (C‐AFM) can realize a real‐space visualization of topography coupled with optoelectronic properties on a microscopic scale and thereby is uniquely suited to probe the local effects of perovskite materials and devices. The fundamental principles, alternative operation modes, and development of C‐AFM are comprehensively reviewed, and applications in perovskite solar cells (PSCs) for electronic transport behavior, ion migration and hysteresis, ferroelectric polarization, and facet orientation investigation are discussed. A comprehensive understanding and summary of up‐to‐date applications in PSCs is beneficial to further fully exploit the potential of such an emerging technique, so as to provide a novel and effective approach for perovskite materials analysis.     

Sensing of silver nanoparticles on/in endothelial cells using atomic force spectroscopy

Endothelial cells, due to their location, are interesting objects for atomic force spectroscopy study. They constitute a barrier between blood and vessel tissues located deeper, and therefore they are the first line of contact with various substances present in blood, eg, drugs or nanoparticles. This work intends to verify whether the mechanical response of immortalized human umbilical vein endothelial cells (EA.hy926), when exposed to silver nanoparticles, as measured using force spectroscopy, could be effectively used as a bio‐indicator of the physiological state of the cells. Silver nanoparticles were characterized with transmission electron microscopy and dynamic light scattering techniques. Tetrazolium salt reduction test was used to determine cell viability after treatment with silver nanoparticles. An elasticity of native cells was examined in the Hanks' buffer whereas fixed cells were softly fixed with formaldehyde. Additional aspect of the work is the comparative force spectroscopy utilizing AFM probes of ball‐shape and conical geometries, in order to understand what changes in cell elasticity, caused by SNPs, were detectable with each probe. As a supplement to elasticity studies, cell morphology observation by atomic force microscopy and detection of silver nanoparticles inside cells using transmission electron microscopy were also performed. Cells exposed to silver nanoparticles at the highest selected concentrations (3.6 μg/mL, 16 μg/mL) are less elastic. It may be associated with the reorganization of the cellular cytoskeleton and the “strengthening” of the cell cortex caused by presence of silver nanoparticles. This observation does not depend on cell fixation. Agglomerates of silver nanoparticles were observed on the cell membrane as well as inside the cells.     

Superparamagnetic graphene quantum dot as a dual‐modality contrast agent for confocal fluorescence microscopy and magnetomotive optical coherence tomography

A magnetic graphene quantum dot (MGQD) nanoparticle, synthesized by hydrothermally reducing and cutting graphene oxide‐iron oxide sheet, was demonstrated to possess the capabilities of simultaneous confocal fluorescence and magnetomotive optical coherence tomography (MMOCT) imaging. This MGQD shows low toxicity, significant tunable blue fluorescence and superparamagnetism, which can thus be used as a dual‐modality contrast agent for confocal fluorescence microscopy (CFM) and MMOCT. The feasibility of applying MGQD as a tracer of cells is shown by imaging and visualizing MGQD labeled cells using CFM and our in‐house MMOCT. Since MMOCT and CFM can offer anatomical structure and intracellular details, respectively, the MGQD for cell tracking could provide a more comprehensive diagnosis.      

Atomic force microscopy study of the antigen‐antibody binding force on patient cancer cells based on ROR1 fluorescence recognition

Knowledge of drug–target interaction is critical to our understanding of drug action and can help design better drugs. Due to the lack of adequate single‐molecule techniques, the information of individual interactions between ligand‐receptors is scarce until the advent of atomic force microscopy (AFM) that can be used to directly measure the individual ligand‐receptor forces under near‐physiological conditions by linking ligands onto the surface of the AFM tip and then obtaining force curves on cells. Most of the current AFM single‐molecule force spectroscopy experiments were performed on cells grown in vitro (cell lines) that are quite different from the human cells in vivo. From the view of clinical practice, investigating the drug–target interactions directly on the patient cancer cells will bring more valuable knowledge that may potentially serve as an important parameter in personalized treatment. Here, we demonstrate the capability of AFM to measure the binding force between target (CD20) and drug (rituximab, an anti‐CD20 monoclonal antibody targeted drug) directly on lymphoma patient cancer cells under the assistance of ROR1 fluorescence recognition. ROR1 is a receptor expressed on some B‐cell lymphomas but not on normal cells. First, B‐cell lymphoma Raji cells (a cell line) were used for ROR1 fluorescence labeling and subsequent measurement of CD20‐rituximab binding force. The results showed that Raji cells expressed ROR1, and the labeling of ROR1 did not influence the measurement of CD20‐rituximab binding force. Then the established experimental procedures were performed on the pathological samples prepared from the bone marrow of a follicular lymphoma patient. Cancer cells were recognized by ROR1 fluorescence. Under the guidance of fluorescence, with the use of a rituximab‐conjugated tip, the cellular topography was visualized by using AFM imaging and the CD20‐Rituximab binding force was measured by single‐molecule force spectroscopy. Copyright © 2013 John Wiley & Sons, Ltd.     

Temperature dependence of the surface topography in dimyristoylphosphatidylcholine/distearoylphosphatidylcholine multibilayers

Simple lipid binary systems are intensively used to understand the formation of domains in biological membranes. The size of individual domains present in the gel/fluid coexistence region of single supported bilayers, determined by atomic force microscopy (AFM), generally exceeds by two to three orders of magnitude that estimated from multibilayers membranes by indirect spectroscopic methods. In this article, the topography of equimolar dimyristoylphosphatidylcholine/distearoylphosphatidylcholine (DMPC/DSPC) multibilayers, made of two superimposed bilayers supported on mica surface, was studied by AFM in a temperature range from room temperature to 45 degrees C. In the gel/fluid phase coexistence region the size of domains, between approximately 100 nm and a few micrometers, was of the same order for the first bilayer facing the mica and the top bilayer facing the buffer. The gel to fluid phase separation temperature of the first bilayer, however, could be increased by up to 8 degrees C, most likely as a function of the buffer layer thickness that separated it from the mica. Topography of the top bilayer revealed the presence of lipids in ripple phase up to 38-40 degrees C. Above this temperature, a pattern characteristic of the coexistence of fluid and gel domains was observed. These data show that difference in the size of lipid domains given by AFM and spectroscopy can hardly be attributed to the use of multibilayers models in spectroscopy experiments. They also provide a direct evidence for metastable ripple phase transformation into a gel/fluid phase separated structure upon heating.