Mg2+-induced conformational changes in the btuB riboswitch from E. coli

Mg²⁺ has been shown to modulate the function of riboswitches by facilitating the ligand-riboswitch interactions. The btuB riboswitch from Escherichia coli undergoes a conformational change upon binding to its ligand, coenzyme B₁₂ (adenosyl-cobalamine, AdoCbl), and down-regulates the expression of the B₁₂ transporter protein BtuB in order to control the cellular levels of AdoCbl. Here, we discuss the structural folding attained by the btuB riboswitch from E. coli in response to Mg²⁺ and how it affects the ligand binding competent conformation of the RNA. The btuB riboswitch notably adopts different conformational states depending upon the concentration of Mg²⁺. With the help of in-line probing, we show the existence of at least two specific conformations, one being achieved in the complete absence of Mg²⁺ (or low Mg²⁺ concentration) and the other appearing above ∼0.5 mM Mg²⁺. Distinct regions of the riboswitch exhibit different dissociation constants toward Mg²⁺, indicating a stepwise folding of the btuB RNA. Increasing the Mg²⁺ concentration drives the transition from one conformation toward the other. The conformational state existing above 0.5 mM Mg²⁺ defines the binding competent conformation of the btuB riboswitch which can productively interact with the ligand, coenzyme B₁₂, and switch the RNA conformation. Moreover, raising the Mg²⁺ concentration enhances the ratio of switched RNA in the presence of AdoCbl. The lack of a AdoCbl-induced conformational switch experienced by the btuB riboswitch in the absence of Mg²⁺ indicates a crucial role played by Mg²⁺ for defining an active conformation of the riboswitch.     

Mg2+ ions bind at the C‐terminal region of skeletal muscle α‐tropomyosin

Tropomyosin (Tm) is a dimeric coiled‐coil protein that polymerizes through head‐to‐tail interactions. These polymers bind along actin filaments and play an important role in the regulation of muscle contraction. Analysis of its primary structure shows that Tm is rich in acidic residues, which are clustered along the molecule and may form sites for divalent cation binding. In a previous study, we showed that the Mg²⁺‐induced increase in stability of the C‐terminal half of Tm is sensitive to mutations near the C‐terminus. In the present report, we study the interaction between Mg²⁺ and full‐length Tm and smaller fragments corresponding to the last 65 and 26 Tm residues. Although the smaller Tm peptide (Tm_{259‐284(W269)}) is flexible and to large extent unstructured, the larger Tm_{220‐284(W269)} fragment forms a coiled coil in solution whose stability increases significantly in the presence of Mg²⁺. NMR analysis shows that Mg²⁺ induces chemical shift perturbations in both Tm_{220‐284(W269)} and Tm_{259‐284(W269)} in the vicinity of His276, in which are located several negatively charged residues. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 583–590, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Diverse modes of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐bifuran]‐5‐carboximidamide (DB832) interaction with multi‐stranded DNA structures

The modes of binding of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐Bifuran]‐5‐carboximidamide (DB832) to multi‐stranded DNAs: human telomere quadruplex, monomolecular R‐triplex, pyr/pur/pyr triplex consisting of 12 T*(T·A) triplets, and DNA double helical hairpin were studied. The optical adsorption of the ligand was used for monitoring the binding and for determination of the association constants and the numbers of binding sites. CD spectra of DB832 complexes with the oligonucleotides and the data on the energy transfer from DNA bases to the bound DB832 assisted in elucidating the binding modes. The affinity of DB832 to the studied multi‐stranded DNAs was found to be greater (K_ass ≈ 10⁷M^?1) than to the duplex DNA (K_ass ≈ 2 × 10⁵M^?1). A considerable stabilizing effect of DB832 binding on R‐triplex conformation was detected. The nature of the ligand tight binding differed for the studied multi‐stranded DNA depending on their specific conformational features: recombination‐type R‐triplex demonstrated the highest affinity for DB832 groove binding, while pyr/pur/pyr TTA triplex favored DB832 intercalation at the end stacking contacts and the human telomere quadruplex d[AG₃(T₂AG₃)₃] accommodated the ligand in a capping mode. Additionally, the pyr/pur/pyr TTA triplex and d[AG₃(T₂AG₃)₃] quadruplex bound DB832 into their grooves, though with a markedly lesser affinity. DB832 may be useful for discrimination of the multi‐sranded DNA conformations and for R‐triplex stabilization. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 8–20, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Uncover the conserved property underlying sequence‐distant and structure‐similar proteins

It is widely accepted that a protein's sequence determines its structure. The surprising finding that proteins of distant sequence can adopt similar 3D structures has raised interesting questions regarding underlying conserved properties that are essential for protein folding and stability. Uncovering the conserved properties may shed light on the folding mechanism of proteins and help with the development of computational tools for protein structure prediction. We compiled and analyzed a structure pair dataset of 66 high‐resolution and low sequence identity (16–38%) soluble proteins. Structure deviation for each pair was confirmed by calculating its C_α SiMax value and comparing its potential energy per residue. Analysis of favorable inter‐residue interactions for each structure pair indicated that the average number of inter‐residue interactions within each structure represents a conserved feature of homologous structures of distant sequence. Detailed comparison of individual types of interactions showed that the average number of either hydrophobic or hydrogen bonding interactions remains unchanged for each structure pair. These findings should be of help to improving the quality of homology models based on templates of low sequence identity, thus broadening the application of homology modeling techniques for protein studies. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 340–347, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Metal-ion binding and metal-ion induced folding of the adenine-sensing riboswitch aptamer domain

Divalent cations are important in the folding and stabilization of complex RNA structures. The adenine-sensing riboswitch controls the expression of mRNAs for proteins involved in purine metabolism by directly sensing intracellular adenine levels. Adenine binds with high affinity and specificity to the ligand binding or aptamer domain of the adenine-sensing riboswitch. The X-ray structure of this domain in complex with adenine revealed an intricate RNA-fold consisting of a three-helix junction stabilized by long-range base-pairing interactions and identified five binding sites for hexahydrated Mg²⁺-ions. Furthermore, a role for Mg²⁺-ions in the ligand-induced folding of this RNA was suggested. Here, we describe the interaction of divalent cations with the RNA–adenine complex in solution as studied by high-resolution NMR spectroscopy. Paramagnetic line broadening, chemical shift mapping and intermolecular nuclear Overhauser effects (NOEs) indicate the presence of at least three binding sites for divalent cations. Two of them are similar to those in the X-ray structure. The third site, which is important for the folding of this RNA, has not been observed previously. The ligand-free state of the RNA is conformationally heterogeneous and contains base-pairing patterns detrimental to ligand binding in the absence of Mg²⁺, but becomes partially pre-organized for ligand binding in the presence of Mg²⁺. Compared to the highly similar guanine-sensing riboswitch, the folding pathway for the adenine-sensing riboswitch aptamer domain is more complex and the influence of Mg²⁺ is more pronounced.     

Bioencapsulation of apomyoglobin in nanoporous organosilica sol–gel glasses: Influence of the siloxane network on the conformation and stability of a model protein

Nanoporous sol–gel glasses were used as host materials for the encapsulation of apomyoglobin, a model protein employed to probe in a rational manner the important factors that influence the protein conformation and stability in silica‐based materials. The transparent glasses were prepared from tetramethoxysilane (TMOS) and modified with a series of mono‐, di‐ and tri‐substituted alkoxysilanes, R_nSi(OCH₃)_4?n (R = methyl‐, n = 1; 2; 3) of different molar content (5, 10, 15%) to obtain the decrease of the siloxane linkage (? Si? O? Si? ). The conformation and thermal stability of apomyoglobin characterized by circular dichroism spectroscopy (CD) was related to the structure of the silica host matrix characterized by ²⁹Si MAS NMR and N₂ adsorption. We observed that the protein transits from an unfolded state in unmodified glass (TMOS) to a native‐like helical state in the organically modified glasses, but also that the secondary structure of the protein was enhanced by the decrease of the siloxane network with the methyl modification (n = 0 < n = 1 < n = 2 < n = 3; 0 < 5 < 10 < 15 mol %). In 15% trimethyl‐modified glass, the protein even reached a maximum molar helicity (?24,000 deg. cm² mol^?1) comparable to the stable folded heme‐bound holoprotein in solution. The protein conformation and stability induced by the change of its microlocal environment (surface hydration, crowding effects, microstructure of the host matrix) were discussed owing to this trend dependency. These results can have an important impact for the design of new efficient biomaterials (sensors or implanted devices) in which properly folded protein is necessary. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 895–906, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR structure of rALF‐Pm3, an anti‐lipopolysaccharide factor from shrimp: Model of the possible lipid A‐binding site

The anti‐lipopolysaccharide factor ALF‐Pm3 is a 98‐residue protein identified in hemocytes from the black tiger shrimp Penaeus monodon. It was expressed in Pichia pastoris from the constitutive glyceraldehyde‐3‐phosphate dehydrogenase promoter as a folded and ¹⁵N uniformly labeled rALF‐Pm3 protein. Its 3D structure was established by NMR and consists of three α‐helices packed against a four‐stranded β‐sheet. The C³⁴? C⁵⁵ disulfide bond was shown to be essential for the structure stability. By using surface plasmon resonance, we demonstrated that rALF‐Pm3 binds to LPS, lipid A and to OM®‐174, a soluble analogue of lipid A. Biophysical studies of rALF‐Pm3/LPS and rALF‐Pm3/OM®‐174 complexes indicated rather high molecular sized aggregates, which prevented us to experimentally determine by NMR the binding mode of these lipids to rALF‐Pm3. However, on the basis of striking structural similarities to the FhuA/LPS complex, we designed an original model of the possible lipid A‐binding site of ALF‐Pm3. Such a binding site, located on the ALF‐Pm3 β‐sheet and involving seven charged residues, is well conserved in ALF‐L from Limulus polyphemus and in ALF‐T from Tachypleus tridentatus. In addition, our model is in agreement with experiments showing that β‐hairpin synthetic peptides corresponding to ALF‐L β‐sheet bind to LPS. Delineating lipid A‐binding site of ALFs will help go further in the de novo design of new antibacterial or LPS‐neutralizing drugs. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 207–220, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational evaluation of labeled C3′‐O‐P‐13CH2‐O‐C4″ phosphonate internucleotide linkage,a phosphodiester isostere

Modified internucleotide linkage featuring the C3′‐O‐P‐CH₂‐O‐C4″ phosphonate grouping as an isosteric alternative to the phosphodiester C3′‐O‐P‐O‐CH₂‐C4″ bond was studied in order to learn more on its stereochemical arrangement, which we showed earlier to be of prime importance for the properties of the respective oligonucleotide analogues. Two approaches were pursued: First, the attempt to prepare the model dinucleoside phosphonate with ¹³C‐labeled CH₂ group present in the modified internucleotide linkage that would allow for a more detailed evaluation of the linkage conformation by NMR spectroscopy. Second, the use of ab initio calculations along with molecular dynamics (MD) simulations in order to observe the most populated conformations and specify main structural elements governing the conformational preferences. To deal with the former aim, a novel synthesis of key labeled reagent (CH₃O)₂P(O)¹³CH₂OH for dimer preparation had to be elaborated using aqueous ¹³C‐formaldehyde. The results from both approaches were compared and found consistent. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 514–529, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural transition from dimeric to tetrameric i‐motif,caused by the presence of TAA at the 3′‐end of human telomeric C‐rich sequence

Widely dispersed in genomic DNA, the tandem C‐rich repetitive stretches may fold below physiological pH, into i‐motif structures, stabilized by C·C⁺ pairing. Herein, structural status of a 9‐mer stretch d(CCCTAACCC), [the truncated double repeat of human telomeric sequence], and its extended version, comprising of additional ? TAA segment at the 3′‐end, representing the complete double repeat d(CCCTAACCCTAA), has been investigated. The pH dependent monophasic UV‐melting, Gel and CD data suggested that while the truncated version adopts a bimolecular i‐motif structure, its complete double repeat (12‐mer) sequence exists in two (bimolecular and tetramolecular) forms. A model is proposed for the tetramolecular i‐motif with conventional C · C⁺ base pairs, additionally stabilized by asymmetric A · A base pairs at the ?3′ TAA flanking ends and Watson–Crick A · T hydrogen bonding between intervening bases on antiparallel strands. Expanding the known topologies of DNA i‐motifs, such atypical geometries of i‐motifs may have implications in their recognition by proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 150–160, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A structural intermediate pre-organizes the add adenine riboswitch for ligand recognition

Riboswitches are RNA sequences that regulate gene expression by undergoing structural changes upon the specific binding of cellular metabolites. Crystal structures of purine-sensing riboswitches have revealed an intricate network of interactions surrounding the ligand in the bound complex. The mechanistic details about how the aptamer folding pathway is involved in the formation of the metabolite binding site have been previously shown to be highly important for the riboswitch regulatory activity. Here, a combination of single-molecule FRET and SHAPE assays have been used to characterize the folding pathway of the adenine riboswitch from Vibrio vulnificus. Experimental evidences suggest a folding process characterized by the presence of a structural intermediate involved in ligand recognition. This intermediate state acts as an open conformation to ensure ligand accessibility to the aptamer and folds into a structure nearly identical to the ligand-bound complex through a series of structural changes. This study demonstrates that the add riboswitch relies on the folding of a structural intermediate that pre-organizes the aptamer global structure and the ligand binding site to allow efficient metabolite sensing and riboswitch genetic regulation.     

Helix‐coil energetics for helix formers and breakers reflect context and temperature: Mutants of helically robust,guest‐sensitive homopeptide hosts

The natural amino acids are primarily helix breakers at the low assignment temperatures characteristic of many studies, but recent genomic analyses of thermophilic proteins suggest that at high temperatures, some breakers may become strong helix formers. Moreover, the breaker/former inventory has not been previously characterized at the physiologically relevant temperature of 37°C. The versatility of ¹³C?O NMR chemical shifts as helicity reporters allows construction of two mutant peptide series, tailored to expand the range of temperature assignments for helical propensities and derived from the core hosts ^tL‐Ala₉XxxAla₉‐^tL and ^tL‐AlaNva₄XxxNva₄Ala₉‐^tL, Nva = norvaline. For three limiting guests Xxx, the helix former Nva and the breakers Gly and Pro, we report w_Xxx[T] assignments at seven temperatures from 2 to 80°C, validating our reasoning and paving the way for assignment of a definitive w_Xxx[T] data‐base. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 311–320, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Molecular dynamics simulation on the allosteric analysis of the c‐di‐GMP class I riboswitch induced by ligand binding

Riboswitches are RNA molecules that regulate gene expression using conformation change, affected by binding of small molecule ligands. Although a number of ligand‐bound aptamer complex structures have been solved, it is important to know ligand‐free conformations of the aptamers in order to understand the mechanism of specific binding by ligands. In this paper, we use dynamics simulations on a series of models to characterize the ligand‐free and ligand‐bound aptamer domain of the c‐di‐GMP class I (GEMM‐I) riboswitch. The results revealed that the ligand‐free aptamer has a stable state with a folded P2 and P3 helix, an unfolded P1 helix and open binding pocket. The first Mg ions binding to the aptamer is structurally favorable for the successive c‐di‐GMP binding. The P1 helix forms when c‐di‐GMP is successive bound. Three key junctions J1/2, J2/3 and J1/3 in the GEMM‐I riboswitch contributing to the formation of P1 helix have been found. The binding of the c‐di‐GMP ligand to the GEMM‐I riboswitch induces the riboswitch's regulation through the direct allosteric communication network in GEMM‐I riboswitch from the c‐di‐GMP binding sites in the J1/2 and J1/3 junctions to the P1 helix, the indirect ones from those in the J2/3 and P2 communicating to P1 helix via the J1/2 and J1/3 media.     

Isostructural unbranched alkyl‐chains as tools for stabilizing β‐turn structure

To investigate the structural role played by isostructural unbranched alkyl‐chains on the conformational ensemble and stability of β‐turn structures, the conformational properties of a designed model peptide: Plm‐Pro‐Gly‐Pda ( 1 , Plm: H₃C—(CH₂)₁₄—CONH—; Pda: —CONH— (CH₂)₁₄—CH₃) have been examined and compared with the parent peptide: Boc‐Pro‐Gly‐NHMe ( 2 , Boc: tert‐butoxycarbonyl; NHMe: N‐methylamide). The characteristic ¹³C NMR chemical‐shifts of the Pro C^β and C^γ resonances ascertained the incidence of an all‐trans peptide‐bond in low polarity deuterochloroform solution. Using FTIR and ¹H NMR spectroscopy, we establish that apolar alkyl‐chains flanking a β‐turn promoting Pro‐Gly sequence impart definite incremental stability to the well‐defined hydrogen‐bonded structure. The assessment of ¹H NMR derived thermodynamic parameters of the hydrogen‐bonded amide‐NHs via variable temperature indicate that much weaker hydrophobic interactions do contribute to the stability of folded reverse turn structures. The far‐UV CD spectral patterns of 1 and 2 in 2,2,2‐trifluoroethanol are consistent with Pro‐Gly specific type II β‐turn structure, concomitantly substantiate that the flanking alkyl‐chains induce substantial bias in enhanced β‐turn populations. In view of structural as well as functional importance of the Pro‐Gly mediated secondary structures, besides biochemical and biological significance of proteins lipidation via myristoylation or palmytoilation, we highlight potential convenience of the unbranched Plm and Pda moieities not only as main‐chain N‐ and C‐terminal protecting groups but also to mimic and stabilize specific isolated secondary and supersecondary structural components frequently observed in proteins and polypeptides. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 419–426, 2013.