A kinetic treatment of stopped‐flow time courses for multiple chemiluminescence of the KIO4‐luminol‐Mn2+ system

Stopped‐flow time courses for chemiluminescence (CL) of the KIO₄‐luminol‐Mn²⁺system showed an instantaneous jump in initial signal followed by two distinct bands. A kinetic model of the form with ten adjustable parameters was proposed to account for CL intensity (I) versus time (t) profiles. The three terms in the model represent the three CL bands. Each band was comprised of a rise part and an exponential decay corresponding to the formation and deactivation of the CL emitter. CL bands could have originated from different CL pathways with the participation of reactive species such as O₂^?, ^?OH and ¹O₂ generated in the reactions involving IO₄^?, O₂ and Mn²⁺. Subsequent reactions of these reactive species with luminol induced CL emissions. Simulation parameters together with peak positions and intensities of the three CL bands were found to vary in different manners by changing conditions such as reagent concentration, pH and temperature. The temperature‐dependence of the rate constants yielded activation energies of 73.2 ± 2.8, 70.1 ± 2.4 and 67.2 ± 1.2 kJ?mol^‐1 for the three decay processes. Moreover, different substances exhibited a significant influence on the three CL bands and their simulation parameters. The numerous parameters and characteristics of CL emissions could serve as multiple probes for detecting analytes, making this system promising for potential analytical applications. Copyright © 2012 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of chemiluminescence from luminol solution and luminol–TiO2 suspension after illumination of a 355 nm pulse laser

Chemiluminescence (CL) from luminol solution and luminol–TiO₂ suspension after illumination of a 355 nm pulse laser is compared. Both the CL systems showed the CL spectra with maximum wavelength of 430 nm, suggesting that the emission was from the excite state of 3‐aminophthalate ion. The TiO₂ photocatalytically induced luminol CL could be separately detected either when the pulse laser power was smaller than 0.15 mJ/pulse or a slit was placed beyond ?2–2 mm in the vertical direction of the laser beam. The TiO₂ photocatalytically induced luminol CL intensity was linear to the laser power, while that of the 355 nm pulse laser‐induced was nonlinear. A log–log plot between the 355 nm pulse laser‐induced luminol CL intensity and laser power showed a near‐linear regression fit with a slope of 2.11, suggesting that a two‐photon absorption process of luminol was present in the 355 nm pulse laser‐induced luminol CL. Adsorbed oxygen on the surface of TiO₂ seemed to greatly contribute to the photocatalytically induced CL. Copyright © 2010 John Wiley & Sons, Ltd.     

A stopped‐flow study of the dual chemiluminescence for the luminol–KIO4–Mn2+ system in strong alkaline solutions

A novel phenomenon of dual chemiluminescence (CL) was observed for the KIO₄–luminol–Mn²⁺ system in strong alkaline solutions using the stopped‐flow technique. Scavenging study of the reactive oxygen species (ROS) suggested that the two CL peaks originated from different CL pathways precipated by distinct ROS (O₂^? and ^?OH for the first peak, mainly ¹O₂ for the second peak). Generation of these ROS at different time intervals from the reactions involving IO₄^?, O₂, and Mn²⁺ and their subsequent reactions with luminol induced the intense CL emission. The relative intensity of the two CL peaks can be tuned over a wide range by varying the concentrations of Mn^2?, luminol and KIO₄. Because of the involvement of different ROS in each pathway, the two CL peaks could respond quite differently to various substances. Moreover, variation of the intensity ratio of the two CL peaks altered the relative proportions of the corresponding ROS, thereby changing their responses to a given substance. The dual CL emission acts like a pair of tunable probes and it is believed that this CL system has great potential in analytical applications. Copyright © 2010 John Wiley & Sons, Ltd.     

New luminol chemiluminescence reaction using diperiodatoargentate as oxidate for the determination of amikacin sulfate

A new chemiluminescence (CL) reaction between luminol and diperiodatoargentate {K₂ [Ag (H₂IO₆) (OH) ₂]} was observed in alkaline medium. The CL intensity could be greatly enhanced by amikacin sulfate. Therefore a new CL method for the determination of amikacin sulfate was built by combining with flow injection technology. A possible mechanism of the CL reaction was proposed via the investigation of the CL kinetic characteristics, the CL spectrum and the UV absorption spectra of some related substance. The concentration range of linear response was 5.1 × 10^?8 to 5.1 × 10^?6 mol L^?1 with a detection limit of 1.9 × 10^?8 mol L^?1 (3σ). The proposed method had good reproducibility with a relative standard deviation of 2.8% (n = 7) for 5.1 × 10^?7 mol L^?1 of amikacin sulfate. It was successfully applied to determine amikacin sulfate in serum. Copyright © 2009 John Wiley & Sons, Ltd.     

Study on the reaction mechanism and the static injection chemiluminescence method for detection of acetaminophen

Acetaminophen, also called paracetamol, is found in Tylenol, Excedrin and other products as over–the‐counter medicines. In this study, acetaminophen as a luminol signal enhancer was used in the chemiluminescence (CL) substrate solution of horseradish peroxidase (HRP) for the first time. The use of acetaminophen in the luminol–HRP–H₂O₂ system affected not only the intensity of the obtained signal, but also its kinetics. It was shown that acetaminophen was to be a potent enhancer of the luminol–HRP–H₂O₂ system. A putative enhancement mechanism for the luminol–H₂O₂–HRP–acetaminophen system is presented. The resonance of the nucleophilic amide group and the benzene ring of acetaminophen structure have a great effect on O‐H bond dissociation energy of the phenol group and therefore on phenoxyl radical stabilization. These radicals act as mediators between HRP and luminol in an electron transfer reaction that generates luminol radicals and subsequently light emission, in which the intensity of CL is enhanced in the presence of acetaminophen. In addition, a simple method was developed to detect acetaminophen by static injection CL based on the enhanced CL system of luminol–H₂O₂–HRP by acetaminophen. Experimental conditions, such as pH and concentrations of substrates, have been examined and optimized. The proposed method exhibited good performance, the linear range was from 0.30 to 7.5 mM, the relative standard deviation was 1.86% (n = 10), limit of detection was 0.16 mM and recovery was 99 ± 4%. Copyright © 2013 John Wiley & Sons, Ltd.     

Copper nanocluster‐enhanced luminol chemiluminescence for high‐selectivity sensing of tryptophan and phenylalanine

A remarkable method for the highly sensitive detection of phenylalanine and tryptophan based on a chemiluminescence (CL) assay was reported. It was found that fluorescent copper nanoclusters capped with cysteine (Cys‐CuNCs) strongly enhance the weak CL signal resulting from the reaction between luminol and H₂O₂. Of the amino acids tested, phenylalanine and tryptophan could enhance the above CL system sensitively. Under optimum conditions, this method was satisfactorily described by a linear calibration curve over a range of 1.0 × 10^?6 to 2.7 × 10^?5 M for phenylalanine and 1.0 × 10^?7 to 3.0 × 10^?5 M for tryptophan, respectively. The effect of various parameters such as Cys‐CuNC concentration, H₂O₂ concentration and pH on the intensity of the CL system were also studied. The main experimental advantage of the proposed method was its selectivity for two amino acids compared with others. To evaluate the applicability of the method to the analysis of a real biological sample it was used to determine tryptophan and phenylalanine in human serum and remarkable results were obtained.     

Determination of sulpiride in pharmaceutical preparations and biological fluids using a Cr (III) enhanced chemiluminescence method

A highly sensitive and simple method for identifying sulpiride in pharmaceutical formulations and biological fluids is presented. The method is based on increased chemiluminescence (CL) intensity of a luminol–H₂O₂ system in response to the addition of Cr (III) under alkaline conditions. The CL intensity of the luminol–H₂O₂–Cr (III) system was greatly enhanced by the addition of sulpiride and the CL intensity was proportional to the concentration of sulpiride in a sample solution. Various parameters affecting the CL intensity were systematically investigated and optimized for determination of the sulpiride in a sample. Under the optimum conditions, the CL intensity was proportional to the concentration of sulpiride in the range of 0.068–4.0 µg/mL, with a good correlation coefficient of 0.997. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 8.50 × 10^‐6 µg/mL and 2.83 × 10^‐5 µg/mL, respectively. The method presented here produced good reproducibility with a relative standard deviation (RSD) of 2.70% (n = 7). The effects of common excipients and metal ions were studied for their interference effect. The method was validated statistically through recovery studies and successfully applied for the determination of sulpiride in pure form, pharmaceutical preparations and spiked human plasma samples. The percentage recoveries were found to range from 99.10 to 100.05% for pure form, 98.12 to 100.18% for pharmaceutical preparations and 97.9 to 101.4% for spiked human plasma. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminol–silver nitrate chemiluminescence enhancement induced by cobalt ferrite nanoparticles

CoFe₂O₄ nanoparticles (NPs) could stimulate the weak chemiluminescence (CL) system of luminol and AgNO₃, resulting in a strong CL emission. The UV–visible spectra, X‐ray photoelectron spectra and TEM images of the investigated system revealed that AgNO₃ was reduced by luminol to Ag in the presence of CoFe₂O₄ NPs and the formed Ag covered the surface of CoFe₂O₄ NPs, resulting in CoFe₂O₄–Ag core–shell nanoparticles. Investigation of the CL reaction kinetics demonstrated that the reaction among luminol, AgNO₃ and CoFe₂O₄ NPs was fast at the beginning and slowed down later. The CL spectra of the luminol ? AgNO₃ ? CoFe₂O₄ NPs system indicated that the luminophor was still an electronically excited 3‐aminophthalate anion. A CL mechanism has been postulated. When the CoFe₂O₄ NPs were injected into the mixture of luminol and AgNO₃, they catalyzed the reduction of AgNO₃ by luminol to produce luminol radicals and Ag, which immediately covered the CoFe₂O₄ NPs to form CoFe₂O₄–Ag core–shell nanoparticles, and the luminol radicals reacted with the dissolved oxygen, leading to a strong CL emission. With the continuous deposition of Ag on the surface of CoFe₂O₄ NPs, the catalytic activity of the core–shell nanoparticles was inhibited and a decrease in CL intensity was observed and also a slow growth of shell on the nanoparticles. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence of the luminol–potassium periodate system enhanced by TGA–capped CdTe quantum dots for the determination of theophylline

The chemiluminescence (CL) behaviour of the luminol–potassium periodate system enhanced by CdTe quantum dots capped with thioglycolic acid (TGA–CdTe QDs) was studied using kinetic experiments, CL spectra, UV–vis absorption spectra and fluorescence spectra. The production of oxygen‐containing reactant intermediates (O₂^?? and OH^?) in the present CL system was verified by CL. The possible CL mechanism was discussed in detail. Furthermore, theophylline (THP) was determined based on its enhancement of the CL intensity of the CdTe QDs–luminol–potassium periodate system coupled with a flow‐injection technique. Under these optimized conditions, the linear range was found to be from 1.0 × 10^?8 to 1.0 × 10^?5 g/mL with a detection limit of 2.8 × 10^?9 g/mL (3σ). The recoveries for the determination of THP in tablets were from 98.2 to 99.6%.     

Radical‐scavenging activity of penicillin G,ampicillin, oxacillin,and dicloxacillin

The aim of this study was to characterize the antioxidant activity of penicillin G (PG), ampicillin (AMP), oxacillin (OX) and dicloxacillin (DOX) through their reactivity towards reactive oxygen species (superoxide anion radical, ; hydroxyl radical, HO^?; peroxyl radical, ROO^?; hydrogen peroxide, H₂O₂; DPPH^?) using various in vitro antioxidant assays with chemiluminescence (CL) and spectrophotometry as measurement techniques. In hydroxyl radical assays , PG, OX and AMP were found to inhibit the CL signal arising from the Fenton‐like reaction in a dose‐dependent manner with IC₅₀ = 0.480 ± 0.020 mM, IC₅₀ = 0.569 ± 0.021 mM, and IC₅₀ = 0.630 ± 0.019 mM, respectively. The highest reactivity of PG among the tested penicillins towards the HO radical was confirmed in the deoxyribose degradation assay. In the ABAP‐derived ROO radical assay, the radical‐scavenging ability of the test penicillins was in the following order: AMP > PG > DOX > OX. The number of reduced DPPH radicals by the drugs tested was <1 being the biggest for PG. The weak antioxidant capacity of the test penicillins was confirmed in the trolox antioxidant capacity assay (0.075 ± 0.004; 0.093 ± 0.006; 0.123 ± 0.005; 0.126 ± 0.004) for OX, AMP, DOX, PG, respectively. Use of luminol as a CL probe for estimation of penicillin reactivity towards H₂O₂ showed that only AMP was able to quench light emission; the remaining antibiotics demonstrated a strong enhancing effect. All the examined compounds showed a weak antioxidant potential when estimated using the ferric‐ferrozine assay. This study is the first to report the evaluation of test penicillins as antioxidants under the same reaction conditions.     

Time-resolved chemiluminescence study of the TiO2 photocatalytic reaction and its induced active oxygen species.

The time-resolved chemiluminescence (CL) method has been applied to study the TiO(2) photocatalytic reaction on a micros-ms timescale. The experimental set-up for time-resolved CL was improved for confirmation of the unique luminol CL induced by the photocatalytic reaction. The third harmonic light (355 nm) from an Nd:YAG laser was used for the light source of the TiO(2) photocatalytic reaction. Luminol CL induced by this reaction was detected by a photomultiplier tube (PMT) and a preamplifier was used for amplifying the CL signal. Experimental conditions affecting the photocatalytically induced CL were discussed in detail. The involvement of active oxygen species such as .OH, O(2) (.-) and H(2)O(2) in the CL was examined by adding their scavengers. It is concluded that .OH was greatly involved in the CL on a micros-ms timescale, especially in time periods <100 micros after illumination of the pulse laser. On the other hand, CL generated by O(2) (.-) began to increase after 100 micros and became dominant after 2.5 ms. A small part of the CL might be generated by H(2)O(2) on the whole micros-ms timescale. A CL reaction mechanism related with .OH and dissolved oxygen was proposed to explain the photocatalytically induced luminol CL on a micros-ms timescale, especially in periods <100 micros.     

Myeloperoxidase-Based Chemiluminescence of Polymorphonuclear Leukocytes and Monocytes

Luminol and lucigenin chemiluminescence (CL) responses produced by separated human blood polymorphonuclear leukocytes (pmn) and monocytes (mono) have been studied following stimulation with the surface-receptor agonist fMLP (a synthetic chemotactic peptide) and the protein kinase C activator phorbol myristate acetate (PMA). Pmn produced two- to threefold the luminol CL and superoxide anion (O₂⁻) levels of mono; lucigenin CL was similar for both cell-types. The myeloperoxidase (MPO) inhibitor salicylhydroxamic acid (SHA) abrogated luminol but not lucigenin CL in both cell types, but did not further inhibit the already grossly subnormal luminol CL responses seen with MPO-deficient cells which produced normal lucigenin CL. SHA also profoundly inhibited the luminol CL response in a cell-free MPO–H₂O₂ system. Mono lucigenin CL does not appear to specifically measure O₂⁻ production. These data show that luminol CL provides a useful measure of pmn and also mono MPO activity. However, analysis of the effects of various reactive oxygen species (ROS) scavengers, assessed on phagocyte and cell-free CL systems (both MPO–H₂O₂ and superoxide generating) suggest that the luminol CL signal is not entirely dependent on MPO activity.     

Cupric oxide nanoparticles‐enhanced chemiluminescence method for measurement of β‐lactam antibiotics

A simple, sensitive cupric oxide nanoparticles (CuO NPs) enhanced chemiluminescence (CL) method was developed for the measurement of β‐lactam antibiotics, including amoxicillin and cefazolin sodium. The method was based on suppression of the CuO NPs–luminol–H₂O₂ CL reaction by β‐lactam antibiotics. Experimental parameters that influenced the inhibitory effect of the antibiotic drugs on the CL system, such as NaOH (mol/L), luminol (µmol/L), H₂O₂ (mol/L) and CuO NPs (mg/L) concentrations, were optimized. Calibration graphs were linear and had dynamic ranges of 1.0 × 10^–6 to 8.0 × 10^–6 mol/L and 3.0 × 10^–5 to 5.0 × 10^–3 mol/L for amoxicillin and cefazolin sodium, respectively, with corresponding detection limits of 7.9 × 10^–7 mol/L and 1.8 × 10^–5 mol/L. The relative standard deviations of five replicate measurements of 5.0 × 10^–6 amoxicillin and 5 × 10^–4 cefazolin sodium were 5.43 and 5.01%, respectively. The synthesized CuO NPs were characterized by X‐ray diffraction (XRD) and transmission electronmicroscopy (TEM). The developed approach was exploited successfully to measure antibiotics in pharmaceutical preparations. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous determination of isoniazid and p‐aminosalicylic acid by capillary electrophoresis using chemiluminescence detection

It was found that isoniazid (ISO) or p‐aminosalicylic acid (PAS) could enhance the chemiluminescence (CL) emission from Cu (II)‐luminol‐hydrogen peroxide system, and the increased chemiluminescence signals were proportional to their concentrations, respectively. Based on this phenomenon, a chemiluminescence method coupled to capillary electrophoresis (CE) was established for simultaneous determination of ISO and PAS. The CE conditions including running buffer and running voltage were investigated in detail. The effects of the pH of H₂O₂ solution and the concentrations of luminol, H₂O₂ and Cu (II) on the CL signal were also investigated carefully. Under the optimized conditions, the analysis could be accomplished within 10 min, with the limits of detection of 0.3 µg mL^–1 for ISO and 1.1 µg mL^–1 for PAS, corresponding to 7.2 and 26.4 pg per injection (24 nL), respectively. Finally, the method was validated by determining the two analytes in pharmaceutical preparation and spiked human serum samples. The results of pharmaceutical tablet analysis were in good agreement with the labeled amounts. The recoveries for ISO and PAS in human serum were in the range of 92–104% and 90–113%, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence of off‐line and on‐line gold nanoparticle‐catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off‐line gold nanoparticle (AuNP)‐catalyzed luminol–H₂O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on‐line AuNP‐catalyzed luminol–H₂O₂ CL system. In the off‐line system, the AuNPs were prepared beforehand, whereas in the on‐line system, AuNPs were produced by on‐line mixing of luminol prepared in a buffer solution of NaHCO₃ ? Na₂CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on‐line system had prominent advantages over the off‐line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off‐line AuNP‐catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy‐sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on‐line system was ascribed to the presence of flavonoids promoting the on‐line formation of AuNPs, which better catalyzed the luminol–H₂O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP‐catalyzed CL system.     

Nitric oxide synthase inhibitors decrease human polymorphonuclear leukocyte luminol-dependent chemiluminescence

Nitric oxide synthase (NOS) inhibitors have been reported to modulate luminol-dependent chemiluminescence (CL) in rat macrophages, whereas the potent oxidant peroxynitrite (ONOO^-) was shown to react with luminol to yield CL in a cellfree system. We evaluated the role of the -arginine/NOS pathway in luminol CL by phorbol ester-activated human polymorpho-nuclear (PMN) leukocytes using the NOS inhibitors N^G-monomethyl- -arginine ( -NMMA) and N-iminoethyl- -omithine ( -NIO). Nitric oxide (·NO) release was determined by oxidation of oxymyoglobin. In addition, the effect of NOS inhibitors on superoxide anion O₂^-) production was measured. Luminol CL was notably diminished by -NMMA in a dose-dependent manner. Superoxide dismutase (SOD) also decreased luminol CL and -NMMA potentiated light emission decrease produced by SOD. Nitric oxide and O₂^·- production was significantly decreased by -NMMA; moreover, luminol-dependent CL but not O₂^·- production was attenuated by -NIO. These data suggest that products of catalytic activity of both ·NO synthase and NADPH oxidase are required to elicit maximal luminol CL in this system. These studies demonstrate that the NOS synthase pathway is involved in luminol CL by human PMN, and they suggest that ONOO would be an unrecognized mediator in this phenomenon.     

Development of a novel chemiluminescence method for the determination of cefazolin sodium in injectable powder and human urine based on a luminol‐Cu(III) complex reaction in alkaline medium

A novel chemiluminescence (CL) method was developed for the determination of cefazolin sodium based on the CL reaction between the [Cu(HIO₆)₂]^5‐Cu(III) complex and luminol in alkaline solution. Results showed that CL emission of Cu(III) complex–luminol in alkaline medium was significantly different from that in acidic medium. A possible mechanism of the enhanced effect of cefazolin on CL emission of the [Cu(HIO₆)₂]^5‐‐ luminol system was proposed. The effect of the reaction conditions on CL emissions was examined. Under optimized conditions, a good linear relationship was obtained between CL intensity and concentrations of cefazolin sodium in the range of 2.0 x 10^‐8 to 2.0 x 10^‐6 g/mL with a correlation coefficient of R² = 0.9978. The limit of detection was 4.58 x 10^‐9 g/mL. The proposed method was applied for the determination of cefazolin sodium in real samples with recoveries of 82.0‐109% with an RSD of 0.7‐2.1%. The proposed method was successfully used for the determination of cefazolin sodium in injectable powder preparations and human urine with satisfactory results. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of ampicillin sodium using the cupric oxide nanoparticles–luminol–H2O2 chemiluminescence reaction

A simple and sensitive chemiluminescence (CL) method has been developed for the determination of ampicillin sodium at submicromolar levels. The method is based on the inhibitory effect of ampicillin sodium on the cupric oxide nanoparticles (CuO NPs)–luminol–H₂O₂ CL reaction. Experimental parameters affecting CL inhibition including concentrations of CuO NPs, luminol, H₂O₂ and NaOH were optimized. Under optimum conditions, the calibration plot was linear in the analyte concentration range 4.0 × 10^‐7–4.0 × 10^‐6 mol/L. The limit of detection was 2.6 × 10^‐7 mol/L and the relative standard deviation (RSD) for six replicate determinations of 1 × 10^‐6 mol/L ampicillin sodium was 4.71%. Also, X–ray diffraction (XRD) and transmission electron microscopy (TEM) analysis were employed to characterize the CuO NPs. The utility of the proposed method was demonstrated by determining ampicillin sodium in pharmaceutical preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Studies of visible oscillating chemiluminescence in luminol–H2O2–KSCN–CuSO4 system using (2‐hydroxyethyl) trimethylammonium hydroxide

Visible oscillating chemiluminescence (CL) of luminol–H₂O₂–KSCN–CuSO₄ was studied using the organic base (2‐hydroxyethyl)trimethylammonium hydroxide. The effect of concentrations of luminol, H₂O₂, KSCN, CuSO₄ and the base were investigated in a batch reactor. This report shows how the concentration of components involved in the oscillating CL system influenced the oscillation period, light amplitude and total time of light emission. The oscillating CL with different bases was also investigated. Results indicated that using 2‐HETMAOH causes regular oscillating CL with nearly the same oscillating period. Copyright © 2008 John Wiley & Sons, Ltd.