Conformation dependence of the CαDα stretch mode in peptides: Side‐chain influence in dipeptide structures

We have shown by theoretical studies of alanine peptides that the C^αD^α stretch frequency could be particularly useful for determining peptide structure because of its sensitivity to the φ,ψ torsion angles at the C^α atom. To demonstrate that this is a robust methodology worthy of experimental exploration, we have also shown that this mode is even more determinative of conformation in aqueous solution, mainly as a result of the development of differential C^α? D^α···O(water) interactions. As further assurance, we now determine the influence of the side chain on this band, showing for aliphatic, a polar, and an aromatic side chains that the dependence is minor and explaining why this is also expected for other side chains. These results should stimulate new experimental methodologies in the field of peptide structure determination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1065–1071, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

VCD spectroscopic properties of the β‐hairpin forming miniprotein CLN025 in various solvents

Electronic and vibrational circular dichroism are often used to determine the secondary structure of proteins, because each secondary structure has a unique spectrum. Little is known about the vibrational circular dichroic spectroscopic features of the β‐hairpin. In this study, the VCD spectral features of a decapeptide, YYDPETGTWY (CLN025), which forms a stable β‐hairpin that is stabilized by intramolecular weakly polar interactions and hydrogen bonds were determined. Molecular dynamics simulations and ECD spectropolarimetry were used to confirm that CLN025 adopts a β‐hairpin in water, TFE, MeOH, and DMSO and to examine differences in the secondary structure, hydrogen bonds, and weakly polar interactions. CLN025 was synthesized by microwave‐assisted solid phase peptide synthesis with N^α‐Fmoc protected amino acids. The VCD spectra displayed a (?,+,?) pattern with bands at 1640 to 1656 cm^?1, 1667 to 1687 cm^?1, and 1679 to 1686 cm^?1 formed by the overlap of a lower frequency negative couplet and a higher frequency positive couplet. A maximum IR absorbance was observed at 1647 to 1663 cm^?1 with component bands at 1630 cm^?1, 1646 cm^?1, 1658 cm^?1, and 1675 to 1680 cm^?1 that are indicative of the β‐sheet, random meander, either random meander or loop and turn, respectively. These results are similar to the results of others, who examined the VCD spectra of β‐hairpins formed by ^DPro‐Xxx turns and indicated that observed pattern is typical of β‐hairpins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 442–450, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR structure of duplex DNA containing the α‐OH‐PdG·dA base pair: A mutagenic intermediate of acrolein

Acrolein, a cell metabolic product and main component of cigarette smoke, reacts with DNA generating α‐OH‐PdG lesions, which have the ability to pair with dATP during replication thereby causing G to T transversions. We describe the solution structure of an 11‐mer DNA duplex containing the mutagenic α‐OH‐PdG·dA base pair intermediate, as determined by solution nuclear magnetic resonance (NMR) spectroscopy and retrained molecular dynamics (MD) simulations. The NMR data support a mostly regular right‐handed helix that is only perturbed at its center by the presence of the lesion. Undamaged residues of the duplex are in anti orientation, forming standard Watson‐Crick base pairs alignments. Duplication of proton signals at and near the damaged base pair reveals the presence of two enantiomeric duplexes, thus establishing the exocyclic nature of the lesion. The α‐OH‐PdG adduct assumes a syn conformation pairing to its partner dA base that is protonated at pH 6.6. The three‐dimensional structure obtained by restrained molecular dynamics simulations show hydrogen bond interactions that stabilize α‐OH‐PdG in a syn conformation and across the lesion containing base pair. We discuss the implications of the structures for the mutagenic bypass of acrolein lesions. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 391–401, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

N‐terminal truncated pyroglutamyl β amyloid peptide Aβpy3‐42 shows a faster aggregation kinetics than the full‐length Aβ1‐42

We tested directly the differences in the aggregation kinetics of three important β amyloid peptides, the full‐length Aβ1‐42, and the two N‐terminal truncated and pyroglutamil modified Aβpy3‐42 and Aβpy11‐42 found in different relative concentrations in the brains in normal aging and in Alzheimer disease. By following the circular dichroism signal and the ThT fluorescence of the solution in phosphate buffer, we found substantially faster aggregation kinetics for Aβpy3‐42. This behavior is due to the particular sequence of this peptide, which is also responsible for the specific oligomeric aggregation states, found by TEM, during the fibrillization process, which are very different from those of Aβ1‐42, more prone to fibril formation. In addition, Aβpy3‐42 is found here to have an inhibitory effect on Aβ1‐42 fibrillogenesis, coherently with its known greater infective power. This is an indication of the important role of this peptide in the aggregation process of β‐peptides in Alzheimer disease. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 861–873, 2009. This article was originally published online as an accepted preprint. The “Published Online“ date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mg2+ ions bind at the C‐terminal region of skeletal muscle α‐tropomyosin

Tropomyosin (Tm) is a dimeric coiled‐coil protein that polymerizes through head‐to‐tail interactions. These polymers bind along actin filaments and play an important role in the regulation of muscle contraction. Analysis of its primary structure shows that Tm is rich in acidic residues, which are clustered along the molecule and may form sites for divalent cation binding. In a previous study, we showed that the Mg²⁺‐induced increase in stability of the C‐terminal half of Tm is sensitive to mutations near the C‐terminus. In the present report, we study the interaction between Mg²⁺ and full‐length Tm and smaller fragments corresponding to the last 65 and 26 Tm residues. Although the smaller Tm peptide (Tm_{259‐284(W269)}) is flexible and to large extent unstructured, the larger Tm_{220‐284(W269)} fragment forms a coiled coil in solution whose stability increases significantly in the presence of Mg²⁺. NMR analysis shows that Mg²⁺ induces chemical shift perturbations in both Tm_{220‐284(W269)} and Tm_{259‐284(W269)} in the vicinity of His276, in which are located several negatively charged residues. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 583–590, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Single‐molecule pair studies of the interactions of the α‐GalNAc (Tn‐antigen) form of porcine submaxillary mucin with soybean agglutinin

Mucins form a group of heavily O‐glycosylated biologically important glycoproteins that are involved in a variety of biological functions, including modulating immune response, inflammation, and adhesion. Mucins are also involved in cancer and metastasis and often express diagnostic cancer antigens. Recently, a modified porcine submaxillary mucin (Tn‐PSM) containing GalNAcα1‐O‐Ser/Thr residues was shown to bind to soybean agglutinin (SBA) with ～10⁶‐fold enhanced affinity relative to GalNAcα1‐O‐Ser, the pancarcinoma carbohydrate antigen. In this study, dynamic force spectroscopy is used to investigate molecular pairs of SBA and Tn‐PSM. A number of force jumps that demonstrate unbinding or rebinding events were observed up to a distance equal to 2.0 μm, consistent with the length of the mucin chain. The unbinding force increased from 103 to 402 pN with increasing force loading rate. The position of the activation barrier in the energy landscape of the interaction was 0.1 nm. The lifetime of the SBA–TnPSM complex in the absence of applied force was determined to be in the range 1.3–1.9 s. Kinetic parameters describing the rate of dissociation of other sugar lectin interactions are in the range 3.3 × 10^?3–2.5 × 10^?3 s. The long lifetime of the SBA‐TnPSM complex is compatible with a binding model in which lectin molecules “bind and jump” from α‐GalNAc residue to α‐GalNAc residue along the polypeptide chain of Tn‐PSM before dissociating. These findings have important implications for the molecular recognition properties of mucins. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 719–728, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The immunosuppressive activity and solution structures of ubiquitin fragments

Recently, ubiquitin was suggested as a promising anti‐inflammatory protein therapeutic. We found that a peptide fragment corresponding to the ubiquitin^50–59 sequence (LEDGRTLSDY) possessed the immunosuppressive activity comparable with that of ubiquitin. CD and NMR spectroscopies were used to determine the conformational preferences of LEDGRTLSDY in solution. The peptide mixture, obtained by pepsin digestion of ubiquitin, was even more potent than the intact protein. Although the peptide exhibited a well‐defined conformation in methanol, its structure was distinct from the corresponding 50–59 fragment in the native ubiquitin molecule. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 423–431, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Heating‐induced conformational change of a novel β‐(1→3)‐D‐glucan from Pleurotus geestanus

Recently, we isolated and purified a neutral polysaccharide (PGN) from edible fungus Pleurotus geestanus. Its structure was characterized by a range of physical–chemical methods, including high performance anion exchange chromatography, uronic acid, and protein analyses, size exclusion chromatography with ultraviolet, refractive index and light scattering detectors, and nuclear magnetic resonance. Our results revealed that PGN is a novel β‐(1→3)‐D ‐glucan with glucose attached to every other sugar residues at Position 6 in the backbone. It has a degree of branching of 1/2. Such structure is different from typical β‐(1→3)‐D ‐glucans schizophyllan and lentinan in which DB is 1/3 and 2/5, respectively. Rheological study showed a very interesting melting behavior of PGN in water solution: heating PGN in water leads to two transitions, in the range of 8–12.5°C and 25–60°C, respectively. The melting behavior and conformational changes were characterized by rheometry, micro‐differential scan calorimetry, atomic force microscopy, static and dynamic light scattering at different temperatures. The first heating‐induced transition corresponds to the disintegration of polymer bundles into small helical clusters, resembling the heating‐induced dissociation of SPG in water at 7°C; the second one might correspond to the dissociation of helical strands to individual chains. The ability of PGN to undergo a conformation/viscosity transition in water upon heating is very valuable to immobilize cells or enzymes or therapeutic DNA/RNA, which makes PGN a potentially useful biomaterial. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 121–131, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Solution structure of a novel T‐cell adhesion inhibitor derived from the fragment of ICAM‐1 receptor: Cyclo(1,8)‐Cys‐Pro‐Arg‐Gly‐Gly‐Ser‐Val‐Cys

This study is aimed at elucidating the structure of a novel T‐cell adhesion inhibitor, cyclo(1,8)‐CPRGGSVC using one‐ and two‐dimensional (2D) ¹H NMR and molecular dynamics (MD) simulation. The peptide is derived from the sequence of its parent peptide cIBR (cyclo(1,12)‐PenPRGGSVLVTGC), which is a fragment of intercellular adhesion molecule‐1 (ICAM‐1). Our previous results show that the cyclo(1,8)‐CPRGGSVC peptide binds to the LFA‐1 I‐domain and inhibits heterotypic T‐cell adhesion, presumably by blocking the LFA‐1/ICAM‐1 interactions. The structure of the peptide was determined using NMR and MD simulation in aqueous solution. Our results indicate that the peptide adopts type‐I β‐turn conformation at the Pro2‐Arg3‐Gly4‐Gly5 (PRGG) sequence. The β‐turn structure at the PRGG motif is well conserved in cIBR peptide and ICAM‐1 receptor, which suggests the importance of the PRGG motif for the biological activity of cyclo(1,8)‐CPRGGSVC peptide. Meanwhile, the Gly5‐Ser6‐Val7‐Cys8‐Cys1 (GSVCC) sequence forms a “turn‐like” random coil structure that does not belong to any structured motif. Therefore, cyclo(1,8)‐CPRGGSVC peptide has only one structured region at the PRGG sequence, which may play an important role in the binding of the peptide to the LFA‐1 I‐domain. The conserved β‐turn conformation of the PRGG motif in ICAM‐1, cIBR, and cyclo(1,8)‐CPRGGSVC peptides can potentially be used to design peptidomimetics. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 633–641, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Computationally designed β‐turn foldamers of γ‐peptides based on 2‐(aminomethyl)cyclohexanecarboxylic acid

The γ‐peptide β‐turn structures have been designed computationally by the combination of chirospecific γ 2 , 3 ‐residues of 2‐(aminomethyl)cyclohexanecarboxylic acid (γAmc₆) with a cyclohexyl constraint on the C^α?C^β bond using density functional methods in water. The chirospecific γAmc₆ dipeptide with the (2S,3S)‐(2R,3R) configurations forms a stable turn structure in water, resembling a type II′ turn of α‐peptides, which can be used as a β‐turn motif in β‐hairpins of Ala‐based α‐peptides. The γAmc₆ dipeptide with homochiral (2S,3S)‐(2S,3S) configurations but different cyclohexyl puckerings shows the capability to be incorporated into one of two β‐turn motifs of gramicidin S. The overall structure of this gramicidin S analogue is quite similar to the native gramicidin S with the same patterns and geometries of hydrogen bonds. Our calculated results and the recently observed results may imply the wider applicability of chirospecific γ‐peptides with a cyclohexyl constraint on the backbone to form various peptide foldamers. © 2012 Wiley Periodicals, Inc. Biopolymers 97:1018–1025, 2012.     

Structural analysis of the human cannabinoid receptor one carboxyl‐terminus identifies two amphipathic helices

Recent research has implicated the C‐terminus of G‐protein coupled receptors in key events such as receptor activation and subsequent intracellular sorting, yet obtaining structural information of the entire C‐tail has proven a formidable task. Here, a peptide corresponding to the full‐length C‐tail of the human CB1 receptor (residues 400–472) was expressed in E.coli and purified in a soluble form. Circular dichroism (CD) spectroscopy revealed that the peptide adopts an α‐helical conformation in negatively charged and zwitterionic detergents (48–51% and 36–38%, respectively), whereas it exhibited the CD signature of unordered structure at low concentration in aqueous solution. Interestingly, 27% helicity was displayed at high peptide concentration suggesting that self‐association induces helix formation in the absence of a membrane mimetic. NMR spectroscopy of the doubly labeled (¹⁵N‐ and ¹³C‐) C‐terminus in dodecylphosphocholine (DPC) identified two amphipathic α‐helical domains. The first domain, S401‐F412, corresponds to the helix 8 common to G protein‐coupled receptors while the second domain, A440‐M461, is a newly identified structural motif in the distal region of the carboxyl‐terminus of the receptor. Molecular modeling of the C‐tail in DPC indicates that both helices lie parallel to the plane of the membrane with their hydrophobic and hydrophilic faces poised for critical interactions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 565–573, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational evaluation of labeled C3′‐O‐P‐13CH2‐O‐C4″ phosphonate internucleotide linkage,a phosphodiester isostere

Modified internucleotide linkage featuring the C3′‐O‐P‐CH₂‐O‐C4″ phosphonate grouping as an isosteric alternative to the phosphodiester C3′‐O‐P‐O‐CH₂‐C4″ bond was studied in order to learn more on its stereochemical arrangement, which we showed earlier to be of prime importance for the properties of the respective oligonucleotide analogues. Two approaches were pursued: First, the attempt to prepare the model dinucleoside phosphonate with ¹³C‐labeled CH₂ group present in the modified internucleotide linkage that would allow for a more detailed evaluation of the linkage conformation by NMR spectroscopy. Second, the use of ab initio calculations along with molecular dynamics (MD) simulations in order to observe the most populated conformations and specify main structural elements governing the conformational preferences. To deal with the former aim, a novel synthesis of key labeled reagent (CH₃O)₂P(O)¹³CH₂OH for dimer preparation had to be elaborated using aqueous ¹³C‐formaldehyde. The results from both approaches were compared and found consistent. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 514–529, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mechanism of formation of the C‐terminal β‐hairpin of the B3 domain of the immunoglobulin‐binding protein G from Streptococcus. IV. Implication for the mechanism of folding of the parent protein

A 34‐residue α/β peptide [IG(28–61)], derived from the C‐terminal part of the B3 domain of the immunoglobulin binding protein G from Streptoccocus, was studied using CD and NMR spectroscopy at various temperatures and by differential scanning calorimetry. It was found that the C‐terminal part (a 16‐residue‐long fragment) of this peptide, which corresponds to the sequence of the β‐hairpin in the native structure, forms structure similar to the β‐hairpin only at T = 313 K, and the structure is stabilized by non‐native long‐range hydrophobic interactions (Val47–Val59). On the other hand, the N‐terminal part of IG(28–61), which corresponds to the middle α‐helix in the native structure, is unstructured at low temperature (283 K) and forms an α‐helix‐like structure at 305 K, and only one helical turn is observed at 313 K. At all temperatures at which NMR experiments were performed (283, 305, and 313 K), we do not observe any long‐range connectivities which would have supported packing between the C‐terminal (β‐hairpin) and the N‐terminal (α‐helix) parts of the sequence. Such interactions are absent, in contrast to the folding pathway of the B domain of protein G, proposed recently by Kmiecik and Kolinski (Biophys J 2008, 94, 726–736), based on Monte‐Carlo dynamics studies. Alternative folding mechanisms are proposed and discussed. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 469–480, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A strained DNA binding helix is conserved for site recognition,folding nucleation,and conformational modulation

Nucleic acid recognition is often mediated by α‐helices or disordered regions that fold into α‐helix on binding. A peptide bearing the DNA recognition helix of HPV16 E2 displays type II polyproline (PII) structure as judged by pH, temperature, and solvent effects on the CD spectra. NMR experiments indicate that the canonical α‐helix is stabilized at the N‐terminus, while the PII forms at the C‐terminus half of the peptide. Re‐examination of the dihedral angles of the DNA binding helix in the crystal structure and analysis of the NMR chemical shift indexes confirm that the N‐terminus half is a canonical α‐helix, while the C‐terminal half adopts a 3₁₀ helix structure. These regions precisely match two locally driven folding nucleii, which partake in the native hydrophobic core and modulate a conformational switch in the DNA binding helix. The peptide shows only weak and unspecific residual DNA binding, 10⁴‐fold lower affinity, and 500‐fold lower discrimination capacity compared with the domain. Thus, the precise side chain conformation required for modulated and tight physiological binding by HPV E2 is largely determined by the noncanonical strained α‐helix conformation, “presented” by this unique architecture. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 432–443, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Rational shape engineering of the filamentous protein γ prefoldin through incremental gene truncation

An enticing possibility in nanotechnology is to use proteins as templates for the positioning of molecules in regular patterns with nanometer precision over large surface areas. However, the ability to redesign protein quaternary structure to construct new shapes remains underdeveloped. In the present work, we have engineered the dimensions of a filamentous protein, the γ prefoldin (γ PFD) from the hyperthermophile Methanocaldococcus jannaschii, and have achieved controllable attachment of filaments in a specific orientation on a carbon surface. Four different constructs of γ PFD were generated in which the coiled coils extending from the association domain are progressively truncated. Three of the truncation constructs form well‐defined filaments with predictable dimensions according to transmission electron microscopy. Two of these constructs had 2D persistence lengths similar to that of γ PFD at 300–740 nm. In contrast, the 2D persistence length of the shortest truncation mutant was 3500 nm, indicating that the filament adsorbs along a different axis than the other constructs with its two rows of coiled coils facing out from the surface. The elastic moduli of the filaments range from 0.7–2.1 GPa, similar to rigid plastics and within the lower limit for proteins whose primary intermolecular interaction is hydrogen bonding. These results demonstrate a versatile approach for controlling the overall dimensions and surface orientation of protein filaments, and expand the toolbox by which to tune two overall dimensions in protein space for the creation of templated materials over a wide variety of conditions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 496–503, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Terminal sidechain packing of a designed β‐hairpin influences conformation and stability

While end capping in α‐helices is well understood, the concept of capping a β‐hairpin is a relatively recent development; to date, favorable Coulombic interactions are the only example of sidechains at the termini influencing the overall stability of a β‐hairpin. While cross‐strand hydrophobic residues generally provide hairpin stabilization, particular when flanking the turn region, those remote from this location appear to provide little stabilization. While probing for an optimal residue at a hydrogen bond position near the terminus of a designed β‐hairpin a conservative, hydrophobic, V → I mutation was observed to not only result in a significant change in fold population but also effected major changes in the structuring shifts at numerous sites in the peptide. Mutational studies reveal that there is an interaction between the sidechain at this H‐bonded site and the sidechain at the C‐terminal non‐H‐bonded site of the hairpin. This interaction, which appears to be hydrophobic in character, requires a highly twisted hairpin structure. Modifications at the C‐terminal site, for example an E → A mutation (ΔΔG_U = 6 kJ/mol), have profound affects on fold structure and stability. The data suggests that this may be a case of hairpin end capping by the formation of a hydrophobic cluster. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 557–564, 2009. This article was originally published online as an accepted preprint. The “Published Online”date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural transition from dimeric to tetrameric i‐motif,caused by the presence of TAA at the 3′‐end of human telomeric C‐rich sequence

Widely dispersed in genomic DNA, the tandem C‐rich repetitive stretches may fold below physiological pH, into i‐motif structures, stabilized by C·C⁺ pairing. Herein, structural status of a 9‐mer stretch d(CCCTAACCC), [the truncated double repeat of human telomeric sequence], and its extended version, comprising of additional ? TAA segment at the 3′‐end, representing the complete double repeat d(CCCTAACCCTAA), has been investigated. The pH dependent monophasic UV‐melting, Gel and CD data suggested that while the truncated version adopts a bimolecular i‐motif structure, its complete double repeat (12‐mer) sequence exists in two (bimolecular and tetramolecular) forms. A model is proposed for the tetramolecular i‐motif with conventional C · C⁺ base pairs, additionally stabilized by asymmetric A · A base pairs at the ?3′ TAA flanking ends and Watson–Crick A · T hydrogen bonding between intervening bases on antiparallel strands. Expanding the known topologies of DNA i‐motifs, such atypical geometries of i‐motifs may have implications in their recognition by proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 150–160, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com