Codon-optimized expression and characterization of a pH stable fungal xylanase in Pichia pastoris

Novel xylanase (EC 3.2.1.8) is in great demand due to its industrial significance. In this study, we have developed and characterized a novel xylanase-producing yeast strain. This mature xylanase gene xyn11A consists of 870 base pairs and belongs to GH11 family. The gene sequence was optimized and synthesized, and was then cloned into yeast vector pGAPZαA under the control of the constitutive GAP promoter. SDS-PAGE analysis indicates that Xyn11A is extracellularly expressed as a glycosylated protein in P. pastoris. Xyn11A is optimally active at 70 °C and pH 7.4. This xylanase retained more than 90% of its activity after incubation at 50 °C and 60 °C for up to 1 h. Xyn11A is also stable over a wide range of pH (2.0–11.0). Most metal ions tested such as copper (Cu²⁺) and lead (Pb²⁺) have little inhibitory effects on Xyn11A. It is also resistant to pepsin and proteinase K digestion, retaining 80% and 90% of its activity after digestion at 37 °C for 1 h, respectively. Those superior properties make Xyn11A a robust xylanase with great potential for industrial use. To the best of our knowledge, this is the first report of xylanase from the fungus Corynascus thermophilus.     

Site-directed mutagenesis of an Aspergillus niger xylanase B and its expression,purification and enzymatic characterization in Pichia pastoris

Xylanase is an important industrial enzyme. In this research, to improve the thermostability and biochemical properties of a xylanase from Aspergillus niger F19, five arginine substitutions and a disulfide bond were introduced by site-directed mutagenesis. The wild-type gene xylB and the mutant gene xylCX8 were expressed in Pichia pastoris. Compare to those of the wild-type enzyme, the optimal reaction temperature for the mutant enzyme increased from 45 °C to 50 °C, the half-life of the mutant enzyme extended from 10 min to 180 min, and the specific activity increased from 2127 U/mg to 3330 U/mg. However, the V_max and K_m of the mutant xylanase decreased. The enzyme activity in broth obtained from shake flask cultures could be induced to 1850 U/mL in 7 days, which is higher than results reported previously. Furthermore, the highest achievable enzyme activity was 7340 U/mL from 140 g/L of biomass in a 3 L fermentor used in our study.     

Engineering a high-performance,metagenomic-derived novel xylanase with improved soluble protein yield and thermostability

The novel termite gut metagenomic-derived GH11 xylanase gene xyl7 was expressed in Escherichia coli BL21, and the purified XYL7 enzyme exhibited high specific activity (6340 U/mg) and broad pH active range of 5.5–10.0. Directed evolution was employed to enhance the thermostability of XYL7; two mutants (XYL7-TC and XYL7-TS) showed a 250-fold increase in half-life at 55 °C, with a 10 °C increase in optimal temperature compared to that of wild-type XYL7. A truncated enzyme (XYL7-Tr3) acquired by protein engineering showed similar catalytic properties as the wild-type, with a tenfold increase in soluble protein yield by the mutant. The reducing sugar produced by XYL7-TC was about fourfold greater than that produced by their parents when incubated with xylan at 60 °C for 4 h. The engineered novel xylanase exhibited superior enzymatic performance and showed promise as an excellent candidate for industrial application due to its high specific activity, stability and soluble protein yield.     

Purification and partial characterisation of a thermostable xylanase from salt-tolerant Thermobifida halotolerans YIM 90462T

ThxynA, an extracellular xylanase of T. halotolerans YIM 90462^T, was purified to homogeneity from a fermentation broth by ultra-filtration, ammonium sulphate precipitation, hydrophobic chromatography and ion exchange chromatography. The purified xylanase has a molecular mass of 24 kDa and is optimally active at 80 °C and pH 6.0. The enzyme is stable over a broad pH range (pH 6.0–10.0) and shows good thermal stability when incubated at 70 °C for 1 h. The K_m and V_max values of the enzyme are 11.6 mg/mL and 434 μmol mg^?1 min^?1, respectively, using oat spelt xylan as a substrate. Moreover, the enzyme seemingly has both xylanase activity and cellulase activity. These unique properties suggest that it may be useful for industrial applications.     

Purification and characterisation of a xylanase from Thermomyces lanuginosus and its functional expression by Pichia pastoris

A xylanase produced by Thermomyces lanuginosus 195 by solid state fermentation (SSF) was purified 9.3-fold from a crude koji extract, with a 7.6% final yield. The purified xylanase (with an estimated mass of 22 kDa by SDS-PAGE) retained 18% relative activity when treated for 10 min at 100 °C and approximately 90% relative activity when incubated at pH values ranging from 6 to 10. Xylanase activity in the purified preparation was significantly enhanced following treatment with manganese and potassium chlorides (p < 0.05) but significantly reduced by calcium, cobalt and iron (p < 0.05). The purified enzyme was also shown to be exclusively xylanolytic. The gene encoding xylanase activity from T. lanuginosus 195 was functionally expressed by Pichia pastoris. MALDI-ToF mass spectrometry and zymography were employed to confirm functional recombinant expression. Maximum xylanase titres were achieved following 120 h induction of the recombinant culture, yielding 26.8 U/mL. Achieving functional protein expression facilitates future efforts to optimise the cultivation conditions for heterologous xylanase production.     

Production of xylanase by Thermoascus aurantiacus from sugar cane bagasse in an aerated growth fermentor

In recent years, the use of xylanases has been adopted by many processing industries, such as pulp and paper, food and textile factories. This study demonstrates that Thermoascus aurantiacus ATCC 204492 is able to produce a high level of thermostable xylanase when sugar cane bagasse is used as a substrate. Fermentations were performed in a glass-column reactor with forced aeration. A xylanase activity of 1597 U/g was attained after 10 days of solid-state fermentation. The effects of different airflow rates (0, 3.0, 6.0 l/(h g) bagasse) and initial mass of bagasse (8, 12.5, 17 g) on the production of xylanase were investigated using a statistical experimental design. The airflow rates had a significant effect on enzyme activity, whereas initial mass of bagasse had no significant effect on enzyme activity. 6 l/(h g) airflow rate and 8 g substrate resulted in the highest yields of xylanase (1597 U/g).     

Obtaining a mutant of Bacillus amyloliquefaciens xylanase A with improved catalytic activity by directed evolution

This study aimed to obtain xylanase exhibiting improved enzyme properties to satisfy the requirements for industrial applications. The baxA gene encoding Bacillus amyloliquefaciens xylanase A was mutated by error-prone touchdown PCR. The mutant, pCbaxA50, was screened from the mutant library by using the 96-well plate high-throughput screening method. Sequence alignment revealed the identical mutation point S138T in xylanase (reBaxA50) produced by the pCbaxA50. The specific activity of the purified reBaxA50 was 9.38 U/mg, which was 3.5 times higher than that of its parent expressed in Escherichia coli BL21 (DE3), named reBaxA. The optimum temperature of reBaxA and reBaxA50 were 55 °C and 50 °C, respectively. The optimum pH of reBaxA and reBaxA50 were pH 6 and pH 5, respectively. Moreover, reBaxA50 was more stable than reBaxA under thermal and extreme pH treatment. The half-life at 60 °C and apparent melting temperature of reBaxA50 were 9.74 min and 89.15 °C, respectively. High-performance liquid chromatography showed that reBaxA50 released xylooligosaccharides from oat spelt, birchwood, and beechwood xylans, with xylotriose as the major product; beechwood xylan was also the most thoroughly hydrolyzed. This study demonstrated that the S138T mutation possibly improved the catalytic activity and thermostability of reBaxA50.     

C-Terminal proline-rich sequence broadens the optimal temperature and pH ranges of recombinant xylanase from Geobacillus thermodenitrificans C5

Efficient utilization of hemicellulose entails high catalytic capacity containing xylanases. In this study, proline rich sequence was fused together with a C-terminal of xylanase gene from Geobacillus thermodenitrificans C5 and designated as GthC5ProXyl. Both GthC5Xyl and GthC5ProXyl were expressed in Escherichia coli BL21 host in order to determine effect of this modification. The C-terminal oligopeptide had noteworthy effects and instantaneously extended the optimal temperature and pH ranges and progressed the specific activity of GthC5Xyl. Compared with GthC5Xyl, GthC5ProXyl revealed improved specific activity, a higher temperature (70 °C versus 60 °C) and pH (8 versus 6) optimum, with broad ranges of temperature and pH (60–80 °C and 6.0–9.0 versus 40–60 °C and 5.0–8.0, respectively). The modified enzyme retained more than 80% activity after incubating in xylan for 3 h at 80 °C as compared to wild −type with only 45% residual activity. Our study demonstrated that proper introduction of proline residues on C-terminal surface of xylanase family might be very effective in improvement of enzyme thermostability. Moreover, this study reveals an engineering strategy to improve the catalytic performance of enzymes.     

Thermostable carbohydrate binding module increases the thermostability and substrate-binding capacity of Trichoderma reesei xylanase 2

To improve the thermostability of Trichoderma reesei xylanase 2 (Xyn2), the thermostabilizing domain (A2) from Thermotoga maritima XynA were engineered into the N-terminal region of the Xyn2 protein. The xyn2 and hybrid genes were successfully expressed in Pichia pastoris using the strong methanol inducible alcohol oxidase 1 (AOX1) promoter and the secretion signal sequence from S. cerevisiae (α-factor). The transformants expressed the hybrid gene produced clearly increased both the thermostability and substrate-binding capacity compared to the corresponding strains expressed the native Xyn2 gene. The activity of the hybrid enzyme was highest at 65 °C that was 10 °C higher than the native Xyn2. The hybrid enzyme was stable at 60 °C and retained more than 85% of its activity after 30-min incubation at this temperature. The hybrid enzyme was highly specific toward xylan and analysis of the products from birchwood xylan degradation confirmed that the enzyme was an endo-xylanase with xylobiose and xylotriose as the main degradation products. These attributes should make it an attractive applicant for various applications. Our results also suggested that the N-terminal domain A2 is responsible for both the thermostability and substrate-binding capacity of T. maritima XynA.     

Biochemical characterization,cloning and molecular modeling of a detergent and organic solvent-stable family 11 xylanase from the newly isolated Aspergillus niger US368 strain

New β-1,4-d-xylan xylanohydrolase (XAn11) belonging to the xylanase 11 family was purified to homogeneity from a newly soil-isolated Aspergillus niger US368 strain. The pure xylanase is a glycosylated monomer having a molecular mass of about 26 kDa. The N-terminal sequence of the purified enzyme was determined and compared to some Aspergillus xylanases N-terminal ones. The gene encoding the XAn11 was cloned and sequenced.The maximal xylanase activity was obtained at pH 5.0 and 55 °C. The XAn11 was found to be stable in a wide range of pH (3–9) and in presence of some detergents and organic solvents. A specific activity of about 805.6 U/mg or 334 U/mg was measured using birchwood xylan or oatspelt xylan as substrate, respectively. A structural explanation of the difference between experimental and theoretical molecular mass as well as the stability of the enzyme against acidic pH was proposed by molecular modeling.     

Molecular cloning and characterization of a novel thermostable xylanase from Paenibacillus campinasensis BL11

An open reading frame (XylX) with 1131 nucleotides from Paenibacillus campinasensis BL11 was cloned and expressed in E. coli. It encodes a family 11 endoxylanase, designated as XylX, of 41 kDa. The homology of the amino acid sequence deduced from XylX is only 73% identical to the next closest sequence. XylX contains a family 11 catalytic domain of the glycoside hydrolase and a family 6 cellulose-binding module. The recombinant xylanase was fused to a His-tag for affinity purification. The XylX activity was 2392 IU/mg, with a K_m of 6.78 mg/ml and a V_max of 4953 mol/min/mg under optimal conditions (pH 7, 60 °C). At pH 11, 60 °C, the activity was still as high as 517 IU/mg. Xylanase activities at 60 °C under pH 5 to pH 9 remained at more than 69.4% of the initial activity level for 8 h. The addition of Hg²⁺ at 5 mM almost completely inhibited xylanase activity, whereas the addition of tris-(2-carboxyethyl)-phosphine (TCEP) and 2-mercaptoethanol stimulated xylanase activity. No relative activities for Avicel, CMC and d-(+)-cellobiose were found. Xylotriose constitutes the majority of the hydrolyzed products from oat spelt and birchwood xylan. Broad pH and temperature stability shows its application potentials for biomass conversion, food and pulp/paper industries.     

Cloning,expression and characterization of a novel acidic xylanase,XYL11B,from the acidophilic fungus Bispora sp. MEY-1

A xylanase gene (xyl11B) was cloned from Bispora sp. MEY-1 and expressed in Pichia pastoris. xyl11B, with a 66-bp intron, encodes a mature protein of 219 residues with highest identity (57.1%) to the Trichoderma reesei xylanase of glycoside hydrolase family 11. The purified recombinant XYL11B was acidophilic, exhibiting maximum activity at pH 2.6 and 65 °C. The enzyme was also thermostable, pH stable, and was highly resistant to both pepsin and trypsin, suggesting good performance in the digestive tract as a feed supplement to improve animal nutrition. The activity of XYL11B was enhanced by most metal ions but was inhibited weakly by Hg²⁺, Pb²⁺and Cu²⁺, which strongly inhibit many other xylanases. The specific activity of XYL11B for oat spelt xylan substrate was 2049 U mg^?1. The main hydrolysis products of xylan were xylose and xylobiose.     

Production of cellulases and xylanase by Aspergillus fumigatus SK1 using untreated oil palm trunk through solid state fermentation

Direct utilization of untreated oil palm trunk (OPT) for cellulases and xylanase production by Aspergillus fumigatus SK1 was conducted under solid-state fermentation (SSF). The highest activities of extracellular cellulases and xylanases were produced at 80% moisture level, initial pH 5.0, 1 × 10⁸ spore/g (inoculum) with 125 μm of OPT as sole carbon source. The cellulases and xylanase activities obtained were 54.27, 3.36, 4.54 and 418.70 U/g substrates for endoglucanase (CMCase), exoglucanase (FPase), β-glucosidase and xylanase respectively. The crude cellulases and xylanase required acidic condition to retain their optimum activities (pH 4.0). Crude cellulases and xylanase were more stable at 40 °C compared to their optimum activities conditions (60 °C for FPase and 70 °C for CMCase, β-glucosidase and xylanase). SDS-PAGE and zymogram analysis showed that Aspergillus fumigatus SK1 could secrete cellulases (endoglucanase, exoglucanase and β-glucosidase), xylanase and protease. Enzymatic degradation of alkaline treated OPT with concentrated crude cellulases and xylanases resulted in producing polyoses.     

Rational pH-engineering of the thermostable xylanase based on computational model

Locating sites of amino acids related to enzyme properties is still a challenge for rational engineering. Based on the strategy that sites of amino acids can be located by dipeptides, a computational model was made for pH-related dipeptides of xylanase. According to the dipeptide model, pH of a thermostable xylanase B from Thermotoga maritima was rationally designed by locating pH-related amino acids in its sequence and structure. In agreement with expectation, the optimum pH (pH_opt) of the xylanase was improved by five amino acids substitutions: E70Q, E74Q, E77Q, G85Q and T87Q. In parallel assay reactions, at 90 °C, its pH_opt increases to 5.5 from 5.1, and its whole pH profile also shifts 0.5 units towards alkaline area; at 80 °C, the relative activity decreases very little over a wide pH range from 5.25 to 6.0. This result demonstrated that the bioinformatics model is useful for pH rational design and engineering of xylanase, a model molecular of a large family of ～10% proteins with (β/α)₈-barrel structure.     

A novel thermostable cellulase free xylanase stable in broad range of pH from Streptomyces sp. CS428

A cellulase free thermostable xylanase from Streptomyces sp. CS428 was isolated from a Korean soil sample, purified by single-step chromatography, and biochemically characterized. The extracellular xylanase was purified 26 fold with a 55% yield by CM Trisacryl cation exchange chromatography. The molecular mass of the enzyme (Xyn428) was approximately 37 kDa. Xyn428 was found to be stable over a broad pH range (4 to ～13.6) and to 50 °C and have an optimum temperature of 80 °C. Xyn428 had K_m and V_max values of 102.3 ± 1.2 mg/mL and 3225.4 ± 15 mmol/min mg, respectively, when beechwood xylan was used as substrate. N-terminal sequence of Xyn428 was INRTDHNENSYLEIHNNEAR. CS428 was grown on different agro waste xylan and produced 4197.1 U/mL of xylanase activity in 36 h of cultivation in wheat bran without supplements. Xyn428 activity was inhibited by Tris salt at concentrations above 20 mM, and produced xylose and xylobiose as major products. It was found to degrade agro waste materials by small unit of enzyme (20 U/g) as shown by electron microscopy. As being simple in purification, thermo tolerant, pH stability in broad range and ability to produce xylooligosaccharides show that Xyn428 has potential applications in industries as a biobleaching agent and for xylooligosaccharides production.     

Immobilization of xylanase on glutaraldehyde activated aluminum oxide pellets for increasing digestibility of poultry feed

This paper reports covalent immobilization of xylanase by response surface methodology on glutaraldehyde-activated aluminum oxide pellets. The optimization of process parameters gave an immobilization yield of 83.65%. The bound enzyme displayed increase in optimum temperature (from 50 to 60 °C) and V_max (from 3333.33 to 5000 IU/mL) in comparison with free enzyme. The pH and temperature stability were also enhanced. An observed increase in half-lives and D-values resulted in improved thermostability. Thermodynamically, increase in enthalpy and free energy change after covalent immobilization could be credited to the enhanced stability. Immobilized xylanase could be reused for 10 consecutive cycles retaining 60% of its initial activity. It was found to be effective in releasing reducing sugar from poultry feed. Immobilization on aluminum oxide pellets is important due to their mechanical resistance at high pH and temperature. So, considerable stability and reusability of bound enzyme may be advantageous for its industrial application.     

The Gram-negative bacterium Azotobacter chroococcum NCIMB 8003 employs a new glycoside hydrolase family 70 4,6-α-glucanotransferase enzyme (GtfD) to synthesize a reuteran like polymer from maltodextrins and starch

BackgroundOriginally the glycoside hydrolase (GH) family 70 only comprised glucansucrases of lactic acid bacteria which synthesize α-glucan polymers from sucrose. Recently we have identified 2 novel subfamilies of GH70 enzymes represented by the Lactobacillus reuteri 121 GtfB and the Exiguobacterium sibiricum 255-15 GtfC enzymes. Both enzymes catalyze the cleavage of (α1 → 4) linkages in maltodextrin/starch and the synthesis of consecutive (α1 → 6) linkages. Here we describe a novel GH70 enzyme from the nitrogen-fixing Gram-negative bacterium Azotobacter chroococcum, designated as GtfD.MethodsThe purified recombinant GtfD enzyme was biochemically characterized using the amylose-staining assay and its products were identified using profiling chromatographic techniques (TLC and HPAEC-PAD). Glucans produced by the GtfD enzyme were analyzed by HPSEC-MALLS-RI, methylation analysis, 1D/2D [1]H/[13]C NMR spectroscopy and enzymatic degradation studies.ResultsThe A. chroococcum GtfD is closely related to GtfC enzymes, sharing the same non-permuted domain organization also found in GH13 enzymes and displaying 4,6-α-glucanotransferase activity. However, the GtfD enzyme is unable to synthesize consecutive (α1 → 6) glucosidic bonds. Instead, it forms a high molecular mass and branched α-glucan with alternating (α1 → 4) and (α1 → 6) linkages from amylose/starch, highly similar to the reuteran polymer synthesized by the L. reuteri GtfA glucansucrase from sucrose.ConclusionsIn view of its origin and specificity, the GtfD enzyme represents a unique evolutionary intermediate between family GH13 (α-amylase) and GH70 (glucansucrase) enzymes.General significanceThis study expands the natural repertoire of starch-converting enzymes providing the first characterization of an enzyme that converts starch into a reuteran-like α-glucan polymer, regarded as a health promoting food ingredient.     

Expression of a bifunctional cellulase with exoglucanase and endoglucanase activities to enhance the hydrolysis ability of cellulase from a marine Aspergillus niger

Low exoglucanase and endoglucanase activities of marine Aspergillus niger cellulase decreased the hydrolyzing ability of cellulase. To increase the activity of halostable cellulase obtained from a marine A. niger, a cellulase with endoglucanase and exoglucanase activity was efficiently expressed by constructing a vector with promoter glaA. Exoglucanase and endoglucanase activities increased from 0.21 and 4.51 U/ml of the original strain to 0.89 U/ml and 15.12 U/ml of the transformant, respectively. Filter paper activity (FPA) increased by 7.1 folds from 0.63 to 4.47 U/ml. The release of glucose by hydrolysis of wheat straw with cellulase from the transformant was 1.37 folds higher than that with cellulase from the original strain under high salinity condition. Cellulase with endoglucanase and exoglucanase activities could be well expressed in marine A. niger. The cellulase from the transformant not only showed higher activity, but also retained halostability. An appreciate proportion of β-glucosidase, exoglucanase, endgolucanasein cellulase was important for hydrolyzing cellulose.     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.