Surface structure of chitosan and hybrid chitosan-amylose films-restoration of the antibacterial properties of chitosan in the amylose film

The surface structure of films prepared by casting aqueous solutions of mixtures of water soluble chitosan (WSC) and amylose as well as a fully deacetylated chitosan was studied. Zeta potential measurements indicated that the surface of WSC and fully deacetylated chitosan films is positively charged but very weakly, whereas, a film of amylose blended with WSC exhibited an obvious positive charge. X-ray photoelectron spectra of these films suggest that less amino groups are exposed on the surface of WSC and fully deacetylated chitosan films, whereas, more amino groups are exposed on the surface of a WSC film blended with amylose. A sheet structure in which free amino groups are less exposed on the surface of the film of WSC or fully deacetylated chitosan is proposed. This accounts for the loss of antibacterial activity of chitosan on the WSC film surface. When blended with amylose, the morphology of the film may be disrupted, resulting in strong antibacterial properties.     

Surface modification of polycaprolactone membrane via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells

Amino groups were covalently introduced onto a polycaprolactone (PCL) surface by the reaction between 1,6-hexanediamine and the ester groups of PCL. The occurrence of the aminolysis and the introduction of free NH(2) groups were verified qualitatively by fluorescence spectroscopy, where rhodamine B isothiocyanate was employed to label NH(2) groups, and quantitatively by absorbance spectroscopy, where ninhydrin was used to react with NH(2) to generate a blue product. Due to the presence of deep pores on the PCL membrane, the aminolysis reaction could penetrate as deep as 50 microm to yield NH(2) density as high as 2 x 10(-7) mol/cm(2). By use of the NH(2) groups as active sites, biocompatible macromolecules such as gelatin, chitosan, or collagen were further immobilized on the aminolyzed PCL membrane via a cross-linking agent, glutaraldehyde. X-ray photoelectron spectroscopy (XPS) and surface wettability measurements confirmed the coupling of the biomacromolecules. The endothelial cell culture proved that the cytocompatibility of the aminolyzed PCL was improved slightly regardless of the NH(2) amount on the surface. After immobilization of the biomacromolecules, however, the cell attachment and proliferation ratios were obviously improved and the cells showed a similar morphology to those on tissue culture polystyrene. Measurement of the von Willebrand factor (vWF) secreted by these endothelial cells (ECs) verified the endothelial function. Hence, a better EC-compatible PCL was produced.     

Granulation and Sludge Bed Stability in Upflow Anaerobic Sludge Bed Reactors in Relation to Surface Thermodynamics

Adhesion of bacteria involved in anaerobic consortia was investigated in upflow anaerobic sludge bed reactors and was related to surface thermodynamics. The adhesion of hydrophilic cells appeared to be enhanced at a low liquid surface tension ((gamma)(infLV)), while the adhesion of hydrophobic cells was favored at a high (gamma)(infLV). Growth in protein-rich growth media resulted in low granular biomass yields; addition of polycations, such as poly-l-lysine and chitosan, increased the (gamma)(infLV) and the granular biomass yield. On the basis of the results of activity tests and microbial counts with wash-out cells, we identified two types of structured granules that were related to the influence of (gamma)(infLV). In one type of granules, hydrophilic acidogens surrounded a more hydrophobic methanogenic association. These granules were selected at a low (gamma)(infLV) provided that carbohydrates were available as substrates. The other type of granules was selected at a high (gamma)(infLV); hydrophobic cells (i.e., methanogens) were predominant throughout these granules. The granules which had acidogens as solid-phase emulsifiers around a methanogenic association appeared to allow more stable reactor performance. Decreasing the (gamma)(infLV) in the reactor by adding trace amounts of a surfactant also increased reactor stability.     

Growth and removal of nitrogen and phosphorus by free-living and chitosan-immobilized cells of the marine cyanobacterium Synechococcus elongatus

This study investigated the growth rate of chitosan-immobilized cells of the marine cyanobacterium Synechococcus elongatus and its potential application in the removal of nitrogen and phosphorus for wastewater treatment. Immobilized cell cultures had a lag phase of growth due to the immobilization method, and their growth rate was similar to that of free-living cell cultures. Ammonia removal was higher in free cells (54%) than in immobilized cells (29%), but nitrate removal was similar in immobilized (38%) and free cells (44%); phosphorus removal was more efficient in free cells (88%) than in immobilized cells (77%). Chlorophyll a and protein content were higher in immobilized cells. Our study demonstrates that S. elongatus immobilized into chitosan capsules can remove nutrients and is able to maintain a growth rate comparable to that of free cells in culture.     

Immobilization of DNA onto a polymer support and its potentiality as immunoadsorbent

Immobilization of DNA to the surface of poly(ethylene terephthalate) (PET) microfibers with a high specific surface area of 0.83 m(2)/g was carried out to give the fiber surface an affinity for anti-DNA antibody. Following ozone oxidation, the microfibers were subjected to graft polymerization of monomers including acrylic acid, methacryloyloxyethyl phosphate, N,N-dimethylaminoethyl methacrylate, N-vinylformamide, and glycidyl methacrylate. Calf thymus DNA was immobilized to the grafted fiber surface through either covalent binding or polyion complexation with the grafted polymer chains. The highest surface density of DNA immobilized (0.6 mug/cm(2)) was obtained when DNA was immobilized through formation of phosphodiester linkage between the hydroxyl group of DNA and the phosphate group in grafted poly(methacryloyloxyethyl phosphate) using 1,1-carbonyldiimidazole, or through polyion complexation between the anionic DNA and the cationic grafted poly(N,N-dimethylaminoethyl methacrylate) chains. Batch adsorption of anti-DNA antibody to the grafted PET fibers with and without DNA immobilized on their surface was conducted with serum obtained from systemic lupus erythematosus model mice. The DNA-immobilized PET fibers exhibited a higher adsorption capacity and specificity than the others. In addition, the DNA-immobilized fibers effectively adsorbed human anti-DNA antibody.     

Use of dextrans as long and hydrophilic spacer arms to improve the performance of immobilized proteins acting on macromolecules

New dextran-agarose supports, suitable for covalent immobilization of enzymes and proteins acting on macromolecular substrates, were prepared. The thick internal fibers of agarose gels were covered by a low-density layer of long, flexible, hydrophilic, and inert dextran molecules. Rennin and protein A were immobilized on these novel supports and the resulting derivatives exhibited a very high capacity for biological recognition of soluble macromolecular substrates. Caseinolytic activity of this immobilized enzyme was 15-fold higher than activity of directly immobilized rennin, through short spacer arms, on agarose gels. Similarly, the new derivatives of immobilized protein A were able to adsorb up to 2 molecules of immunoglobulin per each molecule of immobilized protein A. When the immobilized proteins were secluded away from the support surface by using these new long and hydrophilic spacer arms, they exhibit minimal steric hindrances that could be promoted by the proximity of the support surface.     

Cell adsorption and selective desorption for separation of microbial cells by using chitosan-immobilized silica

Cell adsorption and selective desorption for separation of microbial cells were conducted by using chitosan-immobilized silica (CIS). When chitosan was immobilized onto silica surfaces with glutaraldehyde, bacterial cells adsorbed well and retained viability. Testing of the adsorption and desorption ability of CIS using various microbes such as Escherichia coli, Aeromonas hydrophila, Pseudomonas aeruginosa, Bacillus subtilis, Micrococcus luteus, Staphylococcus aureus, Staphylococcus epidermidis, Lactobacillus casei, Streptococcus mutans, Streptococcus sobrinus, Streptococcus salivarius, Saccharomyces cerevisiae, Saccharomyces ludwigii, and Schizosaccharomyces pombe revealed that most microbes could be adsorbed and selectively desorbed under different conditions. In particular, recovery was improved when L-cysteine was added. A mixture of two bacterial strains adsorbed onto CIS could also be successfully separated by use of specific solutions for each strain. Most of the desorbed cells were alive. Thus, quantitative and selective fractionation of cells is readily achievable by employing chitosan, a known antibacterial material.     

Prolyl endopeptidase inhibitory activity of chitosan sulfates with different degree of deacetylation

Three kinds of partially deacetylated chitosan, 90% deacetylated chitosan, 75% deacetylated chitosan and 50% deacetylated chitosan, were prepared from crab chitin by N-deacetylation with 40% (w/w) sodium hydroxide solution for different durations. In order to improve biological activity and solubility, their sulfated derivatives were prepared, and prolyl endopeptidase (PEP) inhibitory activities were investigated. Fifty percent-deacetylated chitosan sulfate (50-CS) exhibited the highest inhibitory activity, and inhibition rate was a dose-dependant. In addition, Dixon plots suggested that 50-CS was act as competitive inhibitor, and the inhibition constant (K_i) was 2.6 mg/ml.     

Immobilization of lipase to chitosan beads using a natural cross-linker

Genipin, a reagent of plant origin was used for the immobilization of lipase by cross-linking to chitosan beads. The catalytic properties and operational and storage stabilities of the immobilized lipase were compared with the soluble lipase. Under optimum conditions, 198 microg protein was bound per g chitosan with a protein-coupling yield of 35%. The hydrolytic activity was 10.8 U/g chitosan and the relative specific activity was 108%. The immobilized lipase showed better thermal and pH stabilities compared to the soluble form. The immobilized enzyme exhibited mass transfer limitations as reflected by a higher apparent K(m) value and a lower energy of activation. The immobilized enzyme retained about 74% of its initial activity after five hydrolytic cycles.     

Insulin and heparin co-immobilized 3D polyester fabrics for the cultivation of fibroblasts in low-serum media

Insulin and/or heparin immobilized/co-immobilized non-woven polyester fabric (NWPF) discs were developed for the cultivation of L929 mouse fibroblasts in low-serum media. At first, NWPF discs were hydrolyzed to obtain a carboxylic acid group-introduced matrix (NWPF-hydrolyzed). Insulin and heparin co-immobilized NWPF (NWPF-insulin-heparin) was prepared by the grafting of PEO onto NWPF-hydrolyzed disc (NWPF-PEO), followed by the reaction first with insulin and then heparin. In the presence of spacer arm, PEO, the amount of immobilized insulin molecules significantly increased from 6.96 to 84.45 microg/cm(2). The amount of heparin bound to the NWPF-PEO (5.93 microg/cm(2)) was higher than that of the insulin immobilized surface (4.59 microg/cm(2)). Insulin and heparin immobilized NWPF discs were observed with fluorescence microscopy by labeling the insulin and heparin with 8-anilino-1-naphthalene sulfonic acid (ANS) or fluorescein isothiocyanate (FITC), respectively. L929 fibroblasts were used to check the cell adhesion and cell growth capabilities of modified NWPF discs in low-serum media (containing 5% fetal bovine serum). Optical photographs showed that after 2nd day of the culture, fibroblastic cells spread along the length of modified fibers, eventually filling the interfiber space. At the end of 6-day growth period, cell yield in the presence of immobilized heparin was a little bit higher than that of the immobilized insulin. Co-immobilized (insulin/heparin) NWPF discs did not accelerate the cell growth as well as insulin or heparin immobilized discs.     

Cytotoxic activities of water-soluble chitosan derivatives with different degree of deacetylation

Chitosans with different degree of deacetylation (DD) (90% and 50% deacetylated chitosan) were prepared by N-deacetylation followed by grafted onto chitosan to form water-soluble aminoethyl-chitosan (AE-chitosan), and dimetylaminoethyl-chitosan (DMAE-chitosan), diethylaminoethyl-chitosan (DEAE-chitosan). In the present study, cytotoxic activities of the chitosan derivatives were evaluated using three tumor cell lines and two normal cell lines, and structure-activity relationship was suggested. The cytotoxic activity was dependent on their DD and substituted group.     

Preparation and graft copolymerisation of thiolated β-chitin and chitosan derivatives

β-Chitin was extracted from squid pens and deacetylated to β-chitosan. Both polymers were treated with tosyl chloride, potassium thioacetate and sodium methoxide to form 6-mercaptochitin and 6-mercaptochitosan, respectively. The degrees of substitution were lower for the chitosan derivatives and both types of polymer were less substituted than related polymers prepared from α-chitin. The thiolated polymers were reacted with MMA to form grafted copolymers. The solvent had an influence on the success of the polymerisation with the chitosan polymers giving highly grafted materials in aqueous acetic acid solution.     

桦褶孔菌漆酶固定化及其对染料的降解

采用壳聚糖交联法和海藻酸钠-壳聚糖包埋交联法固定化桦褶孔菌产生的漆酶,探讨最佳固定化条件,固定化漆酶的温度,pH稳定性及操作稳定性,并以两种固定化酶分别对4种染料进行了降解.结果表明:(1)壳聚糖交联法固定化漆酶的最佳条件为:壳聚糖2.5%,戊二醛7%,交联时间2h,固定化时间5h,给酶量1g壳聚糖小球:1mL酶液(1U/mL),固定化效率56%;(2)海藻酸钠-壳聚糖包埋交联法固定化漆酶的最佳条件为:海藻酸钠浓度4%,壳聚糖浓度0.7%,氯化钙浓度5%,戊二醛浓度0.6%,给酶量4mL 4%海藻酸钠:1mL酶液(1U/mL),固定化效率高达86%;(3)固定化的漆酶相比游离漆酶有更好的温度和pH稳定性;(4)比较两种固定化漆酶,海藻酸钠-壳聚糖包埋交联法固定化酶的温度及酸度稳定性要优于壳聚糖固定化酶,但可重复操作性要弱于后者,两者重复使用8次后的剩余酶活比率分别为71%及64%;(5)两种固定化酶对所选的4种不同结构的合成染料均有较好的降解效果,其中壳聚糖固定化酶对茜素红的降解效果及重复使用性极佳,重复降解40mg/L的茜素红10次,降解率仍保持在100%.     

Water-soluble chitosan derivatives as a BACE1 inhibitor

BACE1 (the beta-site APP-cleaving enzyme) inhibitory activities of water-soluble chitosan derivatives substituted with aminoethyl, dimethylaminoethyl and diethylaminoethyl groups were investigated. AE-chitosan (90%) prepared from 90% deacetylated chitosan showed the strongest BACE1 inhibitory activity than those of other derivatives. The inhibitory pattern was found to be non-competitive by Dixon plot, and the value of the inhibition constant (K(i)) was 85 microg/mL.     

Mechanism of enhancement of microbial cell hydrophobicity by cationic polymers.

Polycationic polymers have been noted for their effects in promoting cell adhesion to various surfaces, but previous studies have failed to describe a mechanism dealing with this type of adhesion. In the present study, three polycationic polymers (chitosan, poly-L-lysine, and lysozyme) were tested for their effects on microbial hydrophobicity, as determined by adhesion to hydrocarbon and polystyrene. Test strains (Escherichia coli, Candida albicans, and a nonhydrophobic mutant, MR-481, derived from Acinetobacter calcoaceticus RAG-1) were vortexed with hexadecane in the presence of the various polycations, and the extent of adhesion was measured turbidimetrically. Adhesion of all three test strains rose from near zero values to over 90% in the presence of low concentrations of chitosan (125 to 250 micrograms/ml). Adhesion occurred by adsorption of chitosan directly to the cell surface, since E. coli cells preincubated in the presence of the polymer were highly adherent, whereas hexadecane droplets pretreated with chitosan were subsequently unable to bind untreated cells. Inorganic cations (Na+, Mg2+) inhibited the chitosan-mediated adhesion of E. coli to hexadecane, presumably by interfering with the electrostatic interactions responsible for adsorption of the polymer to the bacterial surface. Chitosan similarly promoted E. coli adhesion to polystyrene at concentrations slightly higher than those which mediated adhesion to hexadecane. Poly-L-lysine also promoted microbial adhesion to hexadecane, although at concentrations somewhat higher than those observed for chitosan. In order to study the effect of the cationic protein lysozyme, adhesion was studied at 0 degree C (to prevent enzymatic activity), using n-octane as the test hydrocarbon. Adhesion of E. coli increased by 70% in the presence of 80 micrograms of lysozyme per ml. When the negatively charged carboxylate residues on the E. coli cell surface were substituted for positively charged ammonium groups, the resulting cells became highly hydrophobic, even in the absence of polycations. The observed "hydrophobicity" of the microbial cells in the presence of polycations is thus probably due to a loss of surface electronegativity. The data suggest that enhancement of hydrophobicity by polycationic polymers is a general phenomenon.     

Immobilization of keratinolytic metalloprotease from Chryseobacterium sp. strain kr6 on glutaraldehyde-activated chitosan

Keratinases are exciting keratin-degrading enzymes; however, there have been relatively few studies on their immobilization. A keratinolytic protease from Chryseobacterium sp. kr6 was purified and its partial sequence determined using mass spectrometry. No significant homology to other microbial peptides in the NCBI database was observed. Certain parameters for immobilization of the purified keratinase on chitosan beads were investigated. The production of the chitosan beads was optimized using factorial design and surface response techniques. The optimum chitosan bead production for protease immobilization was a 20 g/l chitosan solution in acetic acid [1.5% (v/v)], glutaraldehyde ranging from 34 g to 56 g/l, and an activation time between 6 and 10 h. Under these conditions, above 80% of the enzyme was immobilized on the support. The behavior of the keratinase loading on the chitosan beads surface was well described using the Langmuir model. The maximum capacity of the support (qm) and dissociation constant (Kd) were estimated as 58.8 U/g and 0.245 U/ml, respectively. The thermal stability of the immobilized enzyme was also improved around 2-fold, when compared with that of the free enzyme, after 30 min at 65 degrees C. In addition, the activity of the immobilized enzyme remained at 63.4% after it was reused five times. Thus, the immobilized enzyme exhibited an improved thermal stability and remained active after several uses.     

Synthesis,characterization and antifungal activity of quaternary derivatives of chitosan on Aspergillus flavus

Two series of new chitosan derivatives were synthesized by reaction of deacetylated chitosan (CH) with propyl (CH-Propyl) and pentyl (CH-Pentyl) trimethylammonium bromides to obtain derivatives with increasing degrees of substitution (DS). The derivatives were characterized by ¹H NMR and potentiometric titration techniques and their antifungal activities on the mycelial growth of Aspergillus flavus were investigated in vitro. The antifungal activities increase with DS and the more substituted derivatives of both series, CH-Propyl and CH-Pentyl, exhibited antifungal activities respectively three and six times higher than those obtained with commercial and deacetylated chitosan. The minimum inhibitory concentrations (MIC) were evaluated at 24, 48 and 72 h by varying the polymer concentration from 0.5 to 16 g/L and the results showed that the quaternary derivatives inhibited the fungus growth at polymer concentrations four times lower than that obtained with deacetylated chitosan (CH). The chitosans modified with pentyltrimethylammonium bromide exhibited higher activity and results are discussed taking into account the degree of substitution (DS).     

Binding and detection of glycosaminoglycans immobilized on membranes treated with cationic detergents

Immobilization of molecules on surfaces is used for preparative, quantitative, and qualitative studies. Glycosaminoglycans (GAGs) are strongly hydrophilic and negatively charged molecules that do not bind well to either polystyrene surfaces or hydrophobic blotting membranes. Hydrophobic membranes were derivatized with cationic detergents to become hydrophilic and positively charged. The ability of the polyvinylidene fluoride and nitrocellulose membranes to retain GAGs increased up to 12.8 microg per spot in the dot blot assay when the membrane was treated with a cationic detergent. Immobilized GAGs were stained with alcian blue, and the staining intensity was quantitated by scanning and densitometry. The derivatized membranes were used for solid-phase extraction of GAGs in blood plasma, urine, or cerebrospinal fluid. The detection sensitivity was equal for different types of GAGs but there was a slight negative interference from fibrinogen in blood plasma. The immobilized GAGs could also be released from the membrane using a nonionic detergent at high ionic strength. Recovery of different proteoglycan populations, separated by electrophoresis and detected by reversible staining with toluidine blue, was 70-100%.     

血清白蛋白在多聚阳离子－壳聚糖共混材料表面的构象变化及其与细胞生长的关系

用L-多聚赖氨酸、聚乙烯亚胺及L-多聚鸟氨酸三种多聚阳离子对壳聚糖进行共混修饰,制备了三种共混材料.在这些材料表面吸附了血清白蛋白,并利用圆二色(CD)光谱研究了白蛋白吸附到材料表面后的构象变化.结果显示,与天然状态相比,白蛋白吸附到共混材料表面后,其α-螺旋、β-折叠及无规则卷曲的含量均发生了明显改变.通过研究MC3T3-E1细胞在这些材料表面的生长情况,发现细胞的增殖与血清白蛋白的构象变化有一定关系,在吸附的白蛋白构象与天然构象最接近的共混材料表面,MC3T3-E1细胞增殖水平最高.     

Production and characterization of a thermostable chitinase from a new alkalophilic Bacillus sp. BG-11

An alkalophilic, environmental micro-organism, Bacillus sp. BG-11, has been isolated and characterized. It produced 76 U ml-1 of chitinase in liquid batch fermentation after 72 h of incubation at 50 degrees C using chitin-enriched medium. The molecular weight of purified chitinase was estimated to be 41 kDa by SDS-PAGE. The pH and temperature optima of chitinase immobilized on chitosan and calcium alginate were 8.5 and 50 degrees C, respectively, which were same as that of free enzyme. The pH and thermostability of immobilized chitinase were enhanced significantly. The chitinase immobilized on chitosan was stable between pH 5.0 and 10.0, and the half-life of chitosan-immobilized enzyme at 70, 80 and 90 degrees C was 90, 70 and 60 min, respectively. The end-products formed during the enzyme-substrate reaction were identified by 13C-NMR, and N-acetyl-D-glucosamine was found to be the major end-product. GlcNAc (GlcNAc)2 and (GlcNAc)3 inhibited the chitinase activity by 32, 25 and 18%, respectively, at a concentration of 10 mmol l-1. The shelf-life of chitinase (retained 100% activity) at 4 degrees C was 8 weeks in the presence of either sodium azide (100 microgram ml-1), sodium metabisulphite (0.1% w/v) or KCl (15% w/v). The enzyme was resistant to the action of proteases and allosamidin.