1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Dielectric barrier discharge plasma as a novel approach for improving 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

Dielectric barrier discharge plasma was used to generate a stable strain of Klebsiella pneumoniae (designated to as Kp-M2) with improved 1,3-propanediol production. The specific activities of glycerol dehydrogenase, glycerol dehydatase and 1,3-propanediol oxidoreductase in the crude cell extract increased from 0.11, 9.2 and 0.15 U mg⁻¹, respectively, for wild type to 0.67, 14.4 and 1.6 U mg⁻¹ for Kp-M2. The glycerol flux of Kp-M2 was redistributed with the flux to the reductive pathway being increased by 20% in batch fermentation. The final 1,3-propanediol concentrations achieved by Kp-M2 in batch and fed-batch fermentations were 19.9 and 76.7 g l⁻¹, respectively, which were higher than those of wild type (16.2 and 49.2 g l⁻¹). The results suggested that dielectric barrier discharge plasma could be used as an effective approach to improve 1,3-propanediol production in K. pneumoniae.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

A novel downstream process for 1,3-propanediol from glycerol-based fermentation

In this paper, a downstream process for purification of 1,3-propanediol from glycerol-based fermentation broth was investigated. The purification of 1,3-propanediol from fermentation broth was achieved by a process combining microfiltration, charcoal treatment, vacuum distillation, and silica gel chromatography. The broth was first filtered through hollow fiber cartridge, wherein 98.7% of biomass was removed. Soluble proteins and other color impurities in the broth were removed by the use of activated charcoal at optimal concentration of 30 g l⁻¹ where the soluble proteins in the broth decreased to 0.1 g l⁻¹ (96.0% protein loss). The obtained broth when concentrated by vacuum distillation resulted in the crystallization of inorganic salts. Subsequently, 1,3-propanediol was purified by gradient chromatography using silica gel as a stationary phase and mixture of chloroform and methanol as a mobile phase. Finally, with the optimal flow rate of 10 ml min⁻¹ and loading amount of 80 ml, the yield of 1,3-propanediol achieved was 89%. The overall yield of 1,3-propanediol using the proposed procedure was 75.47%. The developed method was found to be a simple, rapid, and efficient procedure for the purification of 1,3-propanediol from fermentation broth.     

An improved screening method for microorganisms able to convert crude glycerol to 1,3-propanediol and to tolerate high product concentrations

A new screening method was developed and established to find high-performance bacteria for the conversion of crude glycerol to 1,3-propanediol. Three soil samples from palm oil-rich habitats were investigated using crude glycerol of a German biodiesel plant. Nine promising 1,3-propanediol producers could be found. Because of a special pH buffer system, a fast evaluation on microscale and high 1,3-propanediol concentrations up to 40 g L⁻¹ could be achieved. Three strains demonstrated very high product tolerance and were identified as Clostridium butyricum. Two strains, AKR91b and AKR102a, grew and produced 1,3-propanediol in the presence of 60 g L⁻¹ initial 1,3-propanediol, the strain AKR92a even in the presence of 77 g L⁻¹ 1,3-propanediol. The strains AKR91b and AKR102a tolerated up to 150 g L⁻¹ crude glycerol and produced 80% of the 1,3-propanediol attained from pure glycerol of the same concentration. Further criteria for the choice of a production strain were the pathogenicity (risk class), ability to grow on low-cost media, e.g., with less yeast extract, and robustness, e.g., process stability after several bioconversions. Overall, the strain C. butyricum AKR102a was chosen for further process optimization and scale-up due to its high productivity and high final concentration in a pH-regulated bioreactor.     

Influence of dhaT mutation of K. pneumoniae on 1,3-propanediol fermentation

Metabolic role of 1,3-propanediol oxidoreductase (PDOR) in the production of 1,3-propanediol (1,3-PDO) with K. pneumonia was investigated by knocking out the coded gene dhaT. Fermentation with both the wide-type and mutant were studied in 5 l fermentor. A PDOR-deficient mutant K. pneumonia T1.9131 with 19% PDOR activity of the wild type was constructed. The cultures of the mutant indicated that PDOR inactivation had great effect on the other dha regulon enzymes: activity of glycerol dehydratase decreased by 70% while activity of glycerol dehydrogenase increased by 68%. Fed-batch fermentation showed that more metabolic flux of glycerol was directed to lactate and ethanol in the mutant. Lactate was identified as major metabolite and received an increase in the final concentration from 45 to 91 g l⁻¹, while the concentration of 1,3-PDO production dropped from 94 to 36 g l⁻¹. The results demonstrated PDOR was not indispensable in glycerol metabolism but was crucial in high 1,3-PDO productivity. It is postulated that a hypothetical oxidoreductase was expressed and replaced the function of PDOR. Blocking the pathway towards lactate and ethanol could be a plausible scheme to enhance 1,3-PDO productivity.     

Production of 1,3-propanediol by Clostridium butyricum in continuous culture with cell recycling

The continuous fermentation of 1,3-propanediol from glycerol by Clostridium butyricum was subjected to cell recycling by filtration using hollow-fibre modules made from polysulphone. The performance of the culture system was checked at a retention ratio (dilution rate/bleed rate) of 5, dilution rates between 0.2 h⁻¹ and 1.0 h⁻¹ and glycerol input concentrations of 32 g l⁻¹ and 56 g l⁻¹. The near-to-optimum propanediol concentration of 26.5 g l⁻¹ (for 56 g l⁻¹ glycerol) was maintained up to a dilution rate of 0.5 h⁻¹ and then decreased while the propanediol productivity was highest at 0.7 h⁻¹. The productivity could be increased by a factor of four in comparison to the continuous culture without cell recycling. By application of the model of Zeng and Deckwer [(1995) Biotechnol Prog 11: 71–79] for cultures under substrate excess, it was shown that the limitations resulted exclusively from product inhibition and detrimental influences from the cell recycling system, such as shear stress, were not involved. Received: 20 October 1997 / Received revision: 12 December 1997 / Accepted: 14 December 1997     

Benzene/toluene/p-xylene degradation. Part II. Effect of substrate interactions and feeding strategies in toluene/benzene and toluene/p-xylene fermentations in a partitioning bioreactor

A two-phase aqueous/organic partitioning bioreactor scheme was used to degrade mixtures of toluene and benzene, and toluene and p-xylene, using simultaneous and sequential feeding strategies. The aqueous phase of the partitioning bioreactor contained Pseudomonas sp. ATCC 55595, an organism able to degrade benzene, toluene and p-xylene simultaneously. An industrial grade of oleyl alcohol served as the organic phase. In each experiment, the organic phase of the bioreactor was loaded with 10.15 g toluene, and either 2.0 g benzene or 2.1 g p-xylene. The resulting aqueous phase concentrations were 50 mg/l, 25 mg/l and 8 mg/l toluene, benzene and p-xylene respectively. The simultaneous fermentation of benzene and toluene consumed these compounds at volumetric rates of 0.024 g l⁻¹ h⁻¹ and 0.067 g l⁻¹ h⁻¹, respectively. The simultaneous fermentation of toluene and p-xylene consumed these xenobiotics at volumetric rates of 0.066 g l⁻¹ h⁻¹ and 0.018 g l⁻¹ h⁻¹, respectively. A sequential feeding strategy was employed in which toluene was added initially, but the benzene or p-xylene aliquot was added only after the cells had consumed half of the initial toluene concentration. This strategy was shown to improve overall degradation rates, and to reduce the stress on the microorganisms. In the sequential fermentation of benzene and toluene, the volumetric degradation rates were 0.056 g l⁻¹ h⁻¹ and 0.079 g l⁻¹ h⁻¹, respectively. In the toluene/p-xylene sequential fermentation, the initial toluene load was consumed before the p-xylene aliquot was consumed. After 12 h in which no p-xylene degradation was observed, a 4.0-g toluene aliquot was added, and p-xylene degradation resumed. Excluding that 12-h period, the microbes consumed toluene and p-xylene at volumetric rates of 0.074 g l⁻¹ h⁻¹ and 0.025 g l⁻¹ h⁻¹, respectively. Oxygen limitation occurred in all fermentations during the rapid growth phase. Received: 16 November 1998 / Received revision: 29 March 1999 / Accepted: 9 April 1999     

Stimulation of reductive glycerol metabolism by overexpression of an aldehyde dehydrogenase in a recombinant <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> strain defective in the oxidative pathway

Previously, we constructed a glycerol oxidative pathway-deficient mutant strain of Klebsiella pneumoniae by inactivation of glycerol dehydrogenase (dhaD) to eliminate by-product synthesis during production of 1,3-propanediol (1,3-PD) from glycerol. Although by-product formation was successfully blocked in the resultant strain, the yield of 1,3-PD was not enhanced, probably because dhaD disruption resulted in insufficient regeneration of the cofactor NADH essential for the activity of 1,3-PD oxidoreductase (DhaT). To improve cofactor regeneration, in the present study we overexpressed an NAD⁺-dependent aldehyde dehydrogenase in the recombinant strain. To this end, an aldehyde dehydrogenase AldHk homologous to E. coli AldH but with NAD⁺-dependent propionaldehyde dehydrogenase activity was identified in K. pneumoniae. Functional analysis revealed that the substrate specificity of AldHk embraced various aldehydes including propionaldehyde, and that NAD⁺ was preferred over NADP⁺ as a cofactor. Overexpression of AldHk in the glycerol oxidative pathway-deficient mutant AK/pVOTHk resulted in a 3.6-fold increase (0.57 g l⁻¹ to 2.07 g l⁻¹) in the production of 3-hydroxypropionic acid (3-HP), and a 1.1-fold enhancement (8.43 g l⁻¹ to 9.65 g l⁻¹) of 1,3-PD synthesis, when glycerol was provided as the carbon source, compared to the levels synthesized by the control strain (AK/pVOT). Batch fermentation using AK/pVOTHk showed a significant increase (to 70%, w/w) in conversion of glycerol to the reductive metabolites, 1,3-PD and 3-HP, with no production of by-products except acetate.     

Pentachlorophenol biodegradation kinetics of an oligotrophic fluidized-bed enrichment culture

A fluidized-bed reactor (FBR) was used to enrich an aerobic chlorophenol-degrading microbial culture. Long-term continuous-flow operation with low effluent concentrations selected oligotrophic microorganisms producing good-quality effluent for pentachlorophenol(PCP)-contaminated water. PCP biodegradation kinetics was studied using this FBR enrichment culture. The results from FBR batch experiments were modeled using a modified Haldane equation, which resulted in the following kinetic constants: q _max = 0.41 mg PCP mg protein⁻¹ day⁻¹, K _S = 16 μg l⁻¹, K _i = 5.3 mg l⁻¹, and n = 3.5. These results show that the culture has a high affinity for PCP but is also inhibited by relatively low PCP concentrations (above 1.1 mg PCP l⁻¹). This enrichment culture was maintained over 1 year of continuous-flow operation with PCP as the sole source of carbon and energy. During continuous-flow operation, effluent concentrations below 2 μg l⁻¹ were achieved at 268 min hydraulic retention time (t _HR) and 2.5 mg PCP l⁻¹ feed concentration. An increase in loading rate by decreasing t _HR did not significantly deteriorate the effluent quality until a t _HR decrease from 30 min to 21 min resulted in process failure. Recovery from process failure was slow. Decreasing the feed PCP concentration and increasing t _HR resulted in an improved process recovery. Received: 10 October 1996 / Received revision: 21 January 1997 / Accepted: 24 January 1997     

Continuous production of l(+)-lactic acid by Lactobacillus casei in two-stage systems

A two-stage two-stream chemostat system and a two-stage two-stream immobilized upflow packed-bed reactor system were used for the study of lactic acid production by Lactobacillus casei subsp casei. A mixing ratio of D ₁₂/D ₂= 0.5 (D = dilution rate) resulted in optimum production, making it possible to generate continuously a broth with high lactic acid concentration (48 g l⁻¹) and with a lowered overall content of initial yeast extract (5  g l⁻¹), half the concentration supplied in the one-step process. In the two-stage chemostat system, with the first stage at pH 5.5 and 37 °C and a second stage at pH 6.0, a temperature change from 40 °C to 45 °C in the second stage resulted in a 100% substrate consumption at an overall dilution rate of 0.05 h⁻¹. To increase the cell mass in the system, an adhesive strain of L. casei was used to inoculate two packed-bed reactors, which operated with two mixed feedstock streams at the optimal conditions found above. Lactic acid fermentation started after a lag period of cell growth over foam glass particles. No significant amount of free cells, compared with those adhering to the glass foam, was observed during continuous lactic acid production. The extreme values, 57.5 g l⁻¹ for lactic acid concentration and 9.72 g l⁻¹ h⁻¹ for the volumetric productivity, in upflow packed-bed reactors were higher than those obtained for free cells (48 g l⁻¹  and 2.42 g l⁻¹ h⁻¹) respectively and the highest overall l(+)-lactic acid purity (96.8%) was obtained in the two-chemostat system as compared with the immobilized-cell reactors (93%). Received: 4 December 1997 / Received revision: 23 February 1998 / Accepted: 14 March 1998     

Fermentation of 1,3-propanediol by a lactate deficient mutant of Klebsiella oxytoca under microaerobic conditions

Klebsiella oxytoca M5al is an excellent 1,3-propanediol (1,3-PD) producer, but too much lactic acid yielded greatly lessened the fermentation efficiency for 1,3-PD. To counteract the disadvantage, four lactate deficient mutants were obtained by knocking out the ldhA gene of lactate dehydrogenase (LDH) of K. oxytoca M5al. The LDH activities of the four mutants were from 3.85 to 6.92% of the parental strain. The fed-batch fermentation of 1,3-PD by mutant LDH3, whose LDH activity is the lowest, was studied. The results showed that higher 1,3-PD concentration, productivity, and molar conversion rate from glycerol to 1,3-PD can be gained than those of the wild type strain and no lactic acid is produced under both anaerobic and microaerobic conditions. Sucrose fed during the fermentation increased the conversion and sucrose added at the beginning increased the productivity. In fed-batch fermentation with sucrose as cosubstrate under microaerobic conditions, the 1,3-PD concentration, conversion, and productivity were improved significantly to 83.56 g l⁻¹, 0.62 mol mol⁻¹, and 1.61 g l⁻¹ h⁻¹, respectively. Furthermore, 60.11 g l⁻¹ 2,3-butanediol was also formed as major byproduct in the broth.     

Ammonium and phosphate limitation in 1,3-propanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

Excretion of 1,3-propanediol (1,3-PD) by K. pneumoniae was compared in ammonium- and phosphate-limited chemostat cultures running with an excess of glycerol. 59 and 43% catabolic flux were directed to 1,3-PD in ammonia-limited cultures and phosphate-limited cultures at dilution rate of 0.1 h⁻¹, respectively. Ammonia-limited fed-batch cultures produced 61 g 1,3-PD l⁻¹ and a total of 15 g l⁻¹ organic acid in 36 h. However, phosphate-limited fed-batch cultures excreted 61 g lactate l⁻¹ and 44 g 1,3-PD l⁻¹.     

Propionic acid fermentation of glycerol and glucose by Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp.shermanii

A comparative study was carried out in anaerobic batch cultures on 20 g/l of either glycerol or glucose using two propionibacteria strains, Propionibacterium acidipropionici and Propionibacterium freudenreichii ssp. shermanii. In all cases, fermentation end-products were the same and consisted of propionic acid as the major product, acetic acid as the main by-product and two minor metabolites, n-propanol and succinic acid. Evidence was provided that greater production of propionic acid by propionibacteria was obtained with glycerol as carbon and energy sources. P. acidipropionici showed higher efficiency in glycerol conversion to propionic acid with a faster substrate consumption (0.64 g l⁻¹ h⁻¹) and a higher propionic acid production (0.42 g l⁻¹ h⁻¹ and 0.79 mol/mol). The almost exclusive production of propionic acid from glycerol by this bacterium suggested an homopropionic tendency of this fermentation. Acetic acid final concentration was two times lower on glycerol (2 g/l) than on glucose (4 g/l) for both micro-organisms. P. freudenreichii ssp. shermanii exhibited a glycerol fermentation pattern typical of non-associated glycerol-consumption-product formation. This could indicate a particular metabolism for P. freudenreichii ssp. shermanii oriented towards the production of other specific components. These results tend to show that glycerol could be an excellent alternative to conventional carbon sources such as carbohydrates for propionic acid production. Received: 21 May 1999 / Accepted: 1 November 1999     

Simultaneous bioconversion of glucose and xylose to ethanol by Saccharomyces cerevisiae in the presence of xylose isomerase

Simultaneous isomerisation and fermentation (SIF) of xylose and simultaneous isomerisation and cofermentation (SICF) of a glucose/xylose mixture was carried out by Saccharomyces cerevisiae in the presence of xylose isomerase. The SIF of 50 g l⁻¹ xylose gave an ethanol concentration and metabolic yield of 7.5 g l⁻¹ and 0.36 g (g xylose consumed)⁻¹. These parameters improved to 13.4 g l⁻¹ and 0.40 respectively, when borate was added to the medium. The SICF of a mixture of 50 g l⁻¹ glucose and 50 g l⁻¹ xylose gave an ethanol concentration and metabolic yield of 29.8 g l⁻¹ and 0.42 respectively, in the presence of borate. Temperature modulation from 30 °C to 35 °C during fermentation further enhanced the above parameters to 39 g l⁻¹ and 0.45 respectively. The approach was extended to the bioconversion of sugars present in a real lignocellulose hydrolysate (peanut-shell hydrolysate) to ethanol, with a fairly good yield. Received: 14 May 1999 / Received revision: 27 September 1999 / Accepted: 2 October 1999     

Effect of aeration strategy on the metabolic flux of <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> producing 1,3-propanediol in continuous cultures at different glycerol concentrations

The microbial production of 1,3-propaneidol (1,3-PD) by Klebsiella pneumoniae in continuous fermentation was investigated under low, medium and high glycerol concentrations in the absence and presence of oxygen. The production of 1,3-PD increased with increasing glycerol concentrations, reaching a maximum (266 mmol l⁻¹) under high glycerol concentration (760 mmol l⁻¹) with air sparging at 0.04 vvm. The yield of 1,3-PD, however, decreased gradually with increasing glycerol concentrations, with the highest yield (0.52 mol mol⁻¹) obtained for low glycerol concentration (270 mmol l⁻¹) under anaerobic condition. Enzyme activity assays showed that the specific activity of glycerol dehydratase was highest (0.04 U mg⁻¹) for culture sparged with 0.04 vvm air under high glycerol concentration. The specific activities of glycerol dehydrogenase and 1,3-propanediol oxidoreductase were also improved for all glycerol concentrations and in the presence of oxygen, implying that the dha operon was not repressed under microaerobic conditions. Analysis of metabolic fluxes showed that more carbon flux was shifted to the oxidative pathway with increasing glycerol concentrations, resulting in a reduced flux to 1,3-PD formation. However, the increases in carbon fluxes were not evenly distributed among the oxidative branches of the pathway. Furthermore, ethanol and acetic acid levels were slightly increased whereas 2,3-butanediol and lactic levels were greatly enhanced.     

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens for the production of succinic acid from whey

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens were systematically studied for the production of succinic acid from whey. Addition of 2.5 g l⁻¹ yeast extract and 2.5 g l⁻¹ polypeptone per 10 g l⁻¹ whey was most effective for succinic acid production from both treated and nontreated whey. When 20 g l⁻¹ nontreated whey and 7 g l⁻¹ glucose were used as cosubstrates, the yield and productivity of succinic acid reached at the end of fermentation were 95% and 0.46 g (l h)⁻¹, respectively. These values were higher than those obtained using nontreated whey alone [93% and 0.24 g (l h)⁻¹ for 20 g l⁻¹ whey]. Continuous fermentation of A. succiniciproducens at an optimal dilution rate resulted in the production of succinic acid with high productivity [1.35 g (l h)⁻¹], high conversion yield (93%), and higher ratio of succinic acid to acetic acid (5.1:1) from nontreated whey. Received: 23 July 1999 / Received revision: 17 November 1999 / Accepted: 24 December 1999     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Production of polyhydroxybutyrate by Ralstonia eutropha from protein hydrolysates

Polyhydroxybutyrate (PHB) was produced by Ralstonia eutropha DSM 11348 (formerly Alicaligenes eutrophus) in media containing 20–30 g l⁻¹ casein peptone or casamino acids as sole sources of nitrogen. In fermentations using media based on casein peptone, permanent growth up to a cell dry mass of 65 g l⁻¹ was observed. PHB accumulated in cells up to 60%–80% of dry weight. The lowest yields were found in media without any trace elements or with casamino acids added only. The residual cell dry masses were limited to 10–15 g l⁻¹ and did not contain PHB. The highest productivity amounted to 1.2 g PHB l⁻¹ h⁻¹. The mean molecular mass of the biopolymer was determined as 750 kDa. The proportion of polyhydroxyvalerate was less than 0.2% in PHB. The bioprocess was scaled up to a 300-l plant. During a fermentation time of 39 h the cells accumulated PHB to 78% w/w. The productivity was 0.98 g PHB l⁻¹ h¹. Received: 8 July 1998 / Accepted: 26 August 1998