Osmoprotective polymer additives attenuate the membrane pore‐forming activity of antimicrobial peptoids

Antimicrobial peptides (AMPs) are critical components of the innate immune system and exhibit bactericidal activity against a broad spectrum of bacteria. We investigated the use of N‐substituted glycine peptoid oligomers as AMP mimics with potent antimicrobial activity. The antimicrobial mechanism of action varies among different AMPs, but many of these peptides can penetrate bacterial cell membranes, causing cell lysis. We previously hypothesized that amphiphilic cyclic peptoids may act through a similar pore formation mechanism against methicillin‐resistant Staphylococcus aureus (MRSA). Peptoid‐induced membrane disruption is observed by scanning electron microscopy and results in a loss of membrane integrity. We demonstrate that the antimicrobial activity of the peptoids is attenuated with the addition of polyethylene glycol osmoprotectants, signifying protection from a loss of osmotic balance. This decrease in antimicrobial activity is more significant with larger osmoprotectants, indicating that peptoids form pores with initial diameters of ～2.0–3.8 nm. The initial membrane pores formed by cyclic peptoid hexamers are comparable in diameter to those formed by larger and structurally distinct AMPs. After 24 h, the membrane pores expand to >200 nm in diameter. Together, these results indicate that cyclic peptoids exhibit a mechanism of action that includes effects manifested at the cell membrane of MRSA. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 227–236, 2015.     

Insect antimicrobial peptides show potentiating functional interactions against Gram-negative bacteria

Antimicrobial peptides (AMPs) and proteins are important components of innate immunity against pathogens in insects. The production of AMPs is costly owing to resource-based trade-offs, and strategies maximizing the efficacy of AMPs at low concentrations are therefore likely to be advantageous. Here, we show the potentiating functional interaction of co-occurring insect AMPs (the bumblebee linear peptides hymenoptaecin and abaecin) resulting in more potent antimicrobial effects at low concentrations. Abaecin displayed no detectable activity against Escherichia coli when tested alone at concentrations of up to 200 μM, whereas hymenoptaecin affected bacterial cell growth and viability but only at concentrations greater than 2 μM. In combination, as little as 1.25 μM abaecin enhanced the bactericidal effects of hymenoptaecin. To understand these potentiating functional interactions, we investigated their mechanisms of action using atomic force microscopy and fluorescence resonance energy transfer-based quenching assays. Abaecin was found to reduce the minimal inhibitory concentration of hymenoptaecin and to interact with the bacterial chaperone DnaK (an evolutionarily conserved central organizer of the bacterial chaperone network) when the membrane was compromised by hymenoptaecin. These naturally occurring potentiating interactions suggest that combinations of AMPs could be used therapeutically against Gram-negative bacterial pathogens that have acquired resistance to common antibiotics.     

Interactions of two enantiomers of a designer antimicrobial peptide with structural components of the bacterial cell envelope

Antimicrobial peptides (AMPs) have great potential in treating multi-drug resistant bacterial infections. The antimicrobial activity of d -enantiomers is significantly higher than l -enantiomers and sometimes selectively enhanced against Gram-positive bacteria. Unlike phospholipids in the bacterial plasma membrane, the role of other bacterial cell envelop components is often overlooked in the mode of action of AMPs. In this work, we explored the structural interactions between the main different structural components in Gram-negative/Gram-positive bacteria and the two enantiomers of a designer AMP, GL13K. We observed that both l -GL13K and d -GL13K formed self-assembled amyloid-like nanofibrils when the peptides interacted with lipopolysaccharide and lipoteichoic acid, components of the outer membrane of Gram-negative bacteria and cell wall of Gram-positive bacteria, respectively. Another cell wall component, peptidoglycan, showed strong interactions exclusively with d -GL13K and formed distinct laminar structures. This specific interaction between peptidoglycans and d -GL13K might contribute to the enhanced activity of d -GL13K against Gram-positive bacteria as they have a much thicker peptidoglycan layer than Gram-negative bacteria. A better understanding of the specific role of bacterial cell envelop components in the AMPs mechanism of action can guide the design of more effective Gram-selective AMPs.     

Computational resources and tools for antimicrobial peptides

Antimicrobial peptides (AMPs), as evolutionarily conserved components of innate immune system, protect against pathogens including bacteria, fungi, viruses, and parasites. In general, AMPs are relatively small peptides (<10 kDa) with cationic nature and amphipathic structure and have modes of action different from traditional antibiotics. Up to now, there are more than 19 000 AMPs that have been reported, including those isolated from nature sources or by synthesis. They have been considered to be promising substitutes of conventional antibiotics in the quest to address the increasing occurrence of antibiotic resistance. However, most AMPs have modest direct antimicrobial activity, and their mechanisms of action, as well as their structure–activity relationships, are still poorly understood. Computational strategies are invaluable assets to provide insight into the activity of AMPs and thus exploit their potential as a new generation of antimicrobials. This article reviews the advances of AMP databases and computational tools for the prediction and design of new active AMPs. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Cell selectivity, mechanism of action and LPS-neutralizing activity of bovine myeloid antimicrobial peptide-18 (BMAP-18) and its analogs

To develop novel antimicrobial peptides (AMPs) with improved cell selectivity and potent LPS-neutralizing activity, we synthesized an 18 N-terminal residues peptide (BAMP-18) of bovine myeloid antimicrobial peptide-27 (BMAP-27) and its analogs (BMAP-18-W, BMAP-18-L, BMAP-18-I and BMAP-18-f). BMAP-18 and its analogs displayed much higher cell selectivity (about 4-97-fold increased) as compared to parental BMAP-27 because of their decreased hemolytic activity and retained antimicrobial activity. BMAP-27 caused near-complete dye leakage from bacterial-membrane-mimicking vesicles even at very low concentration of 0.5 μM, whereas BMAP-18 and its analogs induced very little dye leakage (less than 40%) even at 16 μM. These peptides induced near-complete membrane depolarization of Staphylococcus aureus cells under their MIC (4 μM). These results suggests that BMAP-18 and its analogs exhibit lethality toward microbes due to their ability to form small channels that permit the transit of ions or protons, but not molecules as large as calcein, and not by the membrane-disruption/perturbation mode. BMAP-18 and its analogs significantly inhibited nitric oxide (NO) production or tumor necrosis factor-α (TNF-α) release in LPS-stimulated mouse macrophage RAW264.7 cells at 10 μM. In particular, BMAP-18-W showed LPS-neutralizing activity comparable to that of BMAP-27. There was a significant linear correlation between the increase in the hydrophobicity of peptides and LPS-neutralizing activity. Although BMAP-18-W has lower hydrophobicity than BMAP-18-L, it showed higher LPS-neutralizing activity as compared to BMAP-18-L. This result suggests other important parameters of AMPs may be involved in their LPS-neutralizing activity, as well as positive charge and hydrophobicity.     

The cationic cell-penetrating KT2 peptide promotes cell membrane defects and apoptosis with autophagy inhibition in human HCT 116 colon cancer cells

The anticancer activity of cationic antimicrobial peptides (AMPs) has become more interesting because some AMPs have selective recognition against cancer cells. However, their antitumor properties and underlying mechanisms in cancer cells have not been clearly understood. In this study, we evaluated the effects of KT2 (lysine/tryptophan-rich AMP) on the cellular uptake and internalization mechanism, cell viability, surface charge of the cell membrane, membrane integrity, apoptotic cell death, and autophagy in human HCT 116 colon cancer cells. We found that KT2 interacted with the cell membrane of HCT 116 cells and was internalized into HCT 116 cells via clathrin-mediated and caveolae-mediated endocytosis mechanisms. The interaction of KT2 with cells caused cell membrane structure change, elevated membrane permeability, and KT2 also affected the lipid component. The results of atomic force microscopy showed cellular membrane defects of KT2-treated cells. The internalized KT2 induced nuclear condensation and apoptotic cell death. It elevated the apoptotic factor levels including those of cytochrome c and apoptosis-inducing factor. Furthermore, KT2 inhibited autophagy by the suppression of autophagy-related 5, autophagy-related 7, autophagy-related 16 like 1, and Beclin-1 proteins. In conclusion, these results revealed the cytotoxicity of cationic KT2 against HCT 116 cells and may help to clarify the interactions between cationic AMPs and cancer cells.     

病原微生物对抗菌肽抗性机制的研究进展

抗菌肽(antimicrobial peptides, AMPs)是生物先天免疫系统的重要组成部分,可帮助宿主有效应对病原细菌、真菌和病毒等微生物的胁迫,被认为是医疗、食品加工和农业领域最具前途和潜力的抗生素替代物。病原微生物在与抗菌肽的互作中进化出了多种有针对性的抗性机制,本文从病原微生物对AMPs的感应与基因调控、细胞壁/膜成份的修饰、分泌蛋白酶降解及利用外排泵排出等四个方面综述了国内外的研究进展,并对AMPs类制品的研究前景进行了讨论与展望。     

The effect of structural parameters and positive charge distance on the interaction free energy of antimicrobial peptides with membrane surface

Many attempts have been made to find hints explaining the relationship between physicochemical and structural properties of antimicrobial peptides (AMPs) which are relevant to their antimicrobial activities. We here found that there is a difference in the percentages of hydrophobic, hydrophilic, and charged residues between AMPs killing both bacteria and fungi (Group A) and AMPs that only kill bacteria (Group B). The percentage of charged residues in Group A AMPs is highly elevated, while in Group B the percentage of hydrophobic residues is increased. This result suggests a sequence-based mechanism of selectivity for AMPs. Moreover, we examined how the distance between basic residues affects the interaction free energy of AMPs with the membrane surface, since most of the known AMPs act by membrane perturbation. We measured the average distance between basic residues throughout the 3D structure of AMPs by defining D_pr parameter and calculated the interaction free energy for 10 AMPs that interacted with the DPPC membrane using molecular dynamics simulation. We found that the changes of the interaction free energy correlates with the change of D_pr by a linear regression coefficient of r^2?=?.47 and a cubic regression coefficient of r^2?=?.70.     

Cholesterol, lanosterol, and ergosterol attenuate the membrane association of LL-37(W27F) and temporin L

Sterols impart significant changes to the biophysical properties of lipid bilayers. In this regard the impact of cholesterol on membrane organization and dynamics is particularly well documented and serves for comparison with other sterols. However, the factors underlying the molecular evolution of cholesterol remain enigmatic. To this end, cholesterol attenuates membrane perturbation by the so-called antimicrobial peptides (AMPs), produced ubiquitously by eukaryotic cells to combat bacterial infections by compromising the permeability barrier function of the microbial target membranes. In the present study, we addressed the effects of cholesterol, ergosterol, and lanosterol on the membrane association of two structurally and functionally diverse AMPs viz. LL-37(F27W) and temporin L (TemL) using fluorescence spectroscopy. Interestingly, sterol concentration dependent effects on the membrane association of these peptides were observed. At X_Sterol = 0.5 cholesterol was most effective in reducing the membrane intercalation of both LL-37(F27W) and TemL, the corresponding efficiencies of the three sterols decreasing as cholesterol > lanosterol ≥ ergosterol, and cholesterol > lanosterol > ergosterol. It is conceivable that part of the selection pressure for the chemical evolution of cholesterol may have derived from the ability to protect the AMP-secreting host cell from the membrane damaging action of the antimicrobial peptides.     

Bacteriocins: perspective for the development of novel anticancer drugs

Antimicrobial peptides (AMPs) from prokaryotic source also known as bacteriocins are ribosomally synthesized by bacteria belonging to different eubacterial taxonomic branches. Most of these AMPs are low molecular weight cationic membrane active peptides that disrupt membrane by forming pores in target cell membranes resulting in cell death. While these peptides known to exhibit broad-spectrum antimicrobial activity, including antibacterial and antifungal, they displayed minimal cytotoxicity to the host cells. Their antimicrobial efficacy has been demonstrated in vivo using diverse animal infection models. Therefore, we have discussed some of the promising peptides for their ability towards potential therapeutic applications. Further, some of these bacteriocins have also been reported to exhibit significant biological activity against various types of cancer cells in different experimental studies. In fact, differential cytotoxicity towards cancer cells as compared to normal cells by certain bacteriocins directs for a much focused research to utilize these compounds as novel therapeutic agents. In this review, bacteriocins that demonstrated antitumor activity against diverse cancer cell lines have been discussed emphasizing their biochemical features, selectivity against extra targets and molecular mechanisms of action.

     

Interaction of cationic antimicrobial peptides with Mycoplasma pulmonis

We investigated the mode of action underlying the anti-mycoplasma activity of cationic antimicrobial peptides (AMPs) using four known AMPs and Mycoplasma pulmonis as a model mycoplasma. Scanning electron microscopy revealed that the integrity of the M. pulmonis membrane was significantly damaged within 30 min of AMPs exposure, which was confirmed by measuring the uptake of propidium iodine into the mycoplasma cells. The anti-mycoplasma activity of AMPs was found to depend on the binding affinity for phosphatidylcholine, which was incorporated into the mycoplasma membrane from the growth medium and preferentially distributed in the outer leaflet of the lipid bilayer.     

Toxicity study of antimicrobial peptides from wild bee venom and their analogs toward mammalian normal and cancer cells

Recently, we have isolated and characterized remarkable antimicrobial peptides (AMPs) from the venom reservoirs of wild bees. These peptides (melectin, lasioglossins, halictines and macropin) and their analogs display high antimicrobial activity against Gram-positive and -negative bacteria, antifungal activity and low or moderate hemolytic activity. Here we describe cytotoxicity of the above-mentioned AMPs and some of their analogs toward two normal cell lines (human umbilical vein endothelial cells, HUVEC, and rat intestinal epithelial cells, IEC) and three cancer cell lines (HeLa S3, CRC SW 480 and CCRF-CEM T). HeLa S3 cells were the most sensitive ones (concentration causing 50% cell death in the case of the most toxic analogs was 2.5-10 μM) followed by CEM cells. For the other cell lines to be killed, the concentrations had to be four to twenty times higher. These results bring promising outlooks of finding medically applicable drugs on the basis of AMPs. Experiments using fluorescently labeled lasioglossin III (Fl-VNWKKILGKIIKVVK-NH(2)) as a tracer confirmed that the peptides entered the mammalian cells in higher quantities only after they reached the toxic concentration. After entering the cells, their concentration was the highest in the vicinity of the nucleus, in the nucleolus and in granules which were situated at very similar places as mitochondria. Experiments performed using cells with tetramethylrhodamine labeled mitochondria showed that mitochondria were fragmented and lost their membrane potential in parallel with the entrance of the peptides into the cell and the disturbance of the cell membrane.     

Methodology for identification of pore forming antimicrobial peptides from soy protein subunits β-conglycinin and glycinin

Antimicrobial peptides (AMPs) inactivate microbial cells through pore formation in cell membrane. Because of their different mode of action compared to antibiotics, AMPs can be effectively used to combat drug resistant bacteria in human health. AMPs can also be used to replace antibiotics in animal feed and immobilized on food packaging films. In this research, we developed a methodology based on mechanistic evaluation of peptide-lipid bilayer interaction to identify AMPs from soy protein. Production of AMPs from soy protein is an attractive, cost-saving alternative for commercial consideration, because soy protein is an abundant and common protein resource. This methodology is also applicable for identification of AMPs from any protein. Initial screening of peptide segments from soy glycinin (11S) and soy β-conglycinin (7S) subunits was based on their hydrophobicity, hydrophobic moment and net charge. Delicate balance between hydrophilic and hydrophobic interactions is necessary for pore formation. High hydrophobicity decreases the peptide solubility in aqueous phase whereas high hydrophilicity limits binding of the peptide to the bilayer. Out of several candidates chosen from the initial screening, two peptides satisfied the criteria for antimicrobial activity, viz. (i) lipid-peptide binding in surface state and (ii) pore formation in transmembrane state of the aggregate. This method of identification of antimicrobial activity via molecular dynamics simulation was shown to be robust in that it is insensitive to the number of peptides employed in the simulation, initial peptide structure and force field. Their antimicrobial activity against Listeria monocytogenes and Escherichia coli was further confirmed by spot-on-lawn test.     

抗菌肽融合表达研究进展

抗菌肽抗菌谱广、活性稳定,且具有与抗生素不同的抗菌机制,在抑杀病原微生物的同时不易产生耐药性,因而在食品、饲料、医药等领域具有重要的应用价值。基因工程技术是降低抗菌肽生产成本的主要方式,其中融合表达在提高抗菌肽产量方面起到了重要作用。文中综述了抗菌肽融合表达的国内外研究进展,探讨了部分融合标签用于抗菌肽表达的策略,并对今后的发展提出了自己的看法。     

Folding profiles of antimicrobial scorpion venom-derived peptides on hydrophobic surfaces: a molecular dynamics study

Abstract

Most helical antimicrobial peptides (AMPs) are usually unfolded in aqueous solution; however they acquire their secondary structure in the presence of a hydrophobic environment such as lipid membranes. Being the biological membranes the main target of many AMPs it is necessary to understand their way of action. Pandinin 2 (Pin2) is an alpha-helical AMP isolated from the venom of the African scorpion Pandinus imperator which shows high antimicrobial activity against Gram-positive bacteria and it is less active against Gram-negative bacteria, nevertheless, it has strong hemolytic activity. Its chemically synthesized Pin2GVG analog has low hemolytic activity while keeping its antimicrobial activity. With the aim of exploring the partition and subsequent folding of these peptides, in this work we report the results of extensive molecular dynamics simulations of Pin2 and Pin2GVG peptides in the presence of 2 hydrophobic environments such as dodecyl-phosphocholine (DPC) micelle and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocoline (POPC) membrane. Our results indicate that Pin2 folds in DPC with a 79% of alpha-helical content, which is in agreement with the experimental results, while in POPC it has 62.5% of alpha-helical content. On the other hand, Pin2GVG presents a higher percentage of alpha-helical structure in POPC and a smaller content in DPC when compared with Pin2. These results can help to better choose the starting structures in future molecular dynamics simulations of AMPs, because these peptides can adopt slightly different conformations depending on the hydrophobic environment.

Communicated by Ramaswamy H. Sarma     

Antimicrobial peptides derived from different animals: comparative studies of antimicrobial properties,cytotoxicity and mechanism of action

Animals posses a large variety of antimicrobial peptides (AMPs) that serve as effective components in innate host defenses against microbial infections. These antimicrobial peptides differ in amino acid composition, range of antimicrobial specificities, hemolysis, cytotoxicity and mechanisms of action. This study was designed to evaluate their therapeutic potential of the following six antimicrobial peptides initially found from animals: cecropin P1, indolicidin, LL-37, palustrin-OG1, LFP-20 and LFB-11. Our results indicated that cecropin P1 possessed the most desired biological activity, with fast and potent antimicrobial activity but only slight hemolytic or cytotoxic activity against human cells. Indolicidin was more effective against gram-positive bacteria but with higher hemolytic and cytotoxic activity on human peripheral blood mononuclear cell (PBMCs) (P < 0.05). Although LFP-20 and LFB-11 had moderate activity against tested strains and need 30 min to kill E. coli, they showed almost no hemolytic and cytotoxic activity towards PBMCs (P < 0.01). Indolicidin could form pores of well-defined structure in bacterial membranes whereas lysis of E. coli cells was observed after addition LFB-11 and LL-37 at 1 × MIC for 1 h. LL-37 treatment could lead to the leakage of entire bacterial cytoplasmic contents. The most obvious phenomenon was protuberant structures on the E. coli cell surface after incubation with LFP-20, cecropin P1 and palustrin-OG1. The results presented here illustrate that AMPs derived from different animals exhibited different antimicrobial characteristics. Because of their potent and broad-spectrum antimicrobial activity, low cytotoxicity towards normal cells, and the unique mechanism of action, these peptides may provide the impetus for the development of novel strategies for the prevention of bacterial infections in animals.     

Cholesterol, lanosterol, and ergosterol attenuate the membrane association of LL-37(W27F) and temporin L

Sterols impart significant changes to the biophysical properties of lipid bilayers. In this regard the impact of cholesterol on membrane organization and dynamics is particularly well documented and serves for comparison with other sterols. However, the factors underlying the molecular evolution of cholesterol remain enigmatic. To this end, cholesterol attenuates membrane perturbation by the so-called antimicrobial peptides (AMPs), produced ubiquitously by eukaryotic cells to combat bacterial infections by compromising the permeability barrier function of the microbial target membranes. In the present study, we addressed the effects of cholesterol, ergosterol, and lanosterol on the membrane association of two structurally and functionally diverse AMPs viz. LL-37(F27W) and temporin L (TemL) using fluorescence spectroscopy. Interestingly, sterol concentration dependent effects on the membrane association of these peptides were observed. At X(Sterol)=0.5 cholesterol was most effective in reducing the membrane intercalation of both LL-37(F27W) and TemL, the corresponding efficiencies of the three sterols decreasing as cholesterol>lanosterol> or =ergosterol, and cholesterol>lanosterol>ergosterol. It is conceivable that part of the selection pressure for the chemical evolution of cholesterol may have derived from the ability to protect the AMP-secreting host cell from the membrane damaging action of the antimicrobial peptides.     

Enhanced membrane pore formation through high-affinity targeted antimicrobial peptides

Many cationic antimicrobial peptides (AMPs) target the unique lipid composition of the prokaryotic cell membrane. However, the micromolar activities common for these peptides are considered weak in comparison to nisin, which follows a targeted, pore-forming mode of action. Here we show that AMPs can be modified with a high-affinity targeting module, which enables membrane permeabilization at low concentration. Magainin 2 and a truncated peptide analog were conjugated to vancomycin using click chemistry, and could be directed towards specific membrane embedded receptors both in model membrane systems and whole cells. Compared with untargeted vesicles, a gain in permeabilization efficacy of two orders of magnitude was reached with large unilamellar vesicles that included lipid II, the target of vancomycin. The truncated vancomycin-peptide conjugate showed an increased activity against vancomycin resistant Enterococci, whereas the full-length conjugate was more active against a targeted eukaryotic cell model: lipid II containing erythrocytes. This study highlights that AMPs can be made more selective and more potent against biological membranes that contain structures that can be targeted.     

Design and characterization of novel hybrid antimicrobial peptides based on cecropin A, LL-37 and magainin II

Antimicrobial peptides (AMPs) are a naturally occurring component of the innate immune response of many organisms and can have activity against both Gram-negative and Gram-positive bacterial species. In order to optimize and improve the direct antimicrobial effect of AMPs against a broad spectrum of bacterial species, novel synthetic hybrids were rationally designed from cecropin A, LL-37 and magainin II. AMPs were selected based on their α-helical secondary structure and fragments of these were analyzed and combined in silico to determine which hybrid peptides would form the best amphipathic cationic α-helices. Four hybrid peptides were synthesized (CaLL, CaMA, LLaMA and MALL) and evaluated for direct antimicrobial activity against a range of bacterial species (Bacillus anthracis, Burkholderia cepacia, Francisella tularensis LVS and Yersinia pseudotuberculosis) alongside the original 'parent' AMPs. The hybrid peptides showed greater antimicrobial effects than the parent AMPs (in one case a parent is completely ineffective while a hybrid based on it removes all traces of bacteria by 3h), although they also demonstrated higher hemolytic properties. Modifications were then carried out to the most toxic hybrid AMP (CaLL) to further improve the therapeutic index. Modifications made to the hybrid lowered hemolytic activity and also lowered antimicrobial activity by various degrees. Overall, this work highlights the potential for rational design and synthesis of improved AMPs that have the capability to be used therapeutically for treatment of bacterial infections.