Polysaccharide production by a reduced pigmentation mutant of the fungus Aureobasidium pullulans

Abstract A reduced pigmentation mutant was isolated from Aureobasidium pullulans ATCC 42023 by chemical mutagenesis and was subsequently characterized. The pigment melanin was present not only in A. pullulans cells but also contaminated the elaborated polysaccharide and thus, was measured in both fractions. Cellular and polysaccharide melanin levels of the mutant strain were at least 11-fold and 18-fold reduced, respectivelu, compared toits parent strain after 7 days of growth at 30°C whether sucrose or glucose served as the carbon source in the culture medium. Polysaccharide and cell dry weight levels of the mutant were very similar to those observed for the parent after growth on sucrose or glucose as the source of carbon over a period of 7 days at 30°C. The pullulan content of the polysaccharide produced by the parent or mutant strain was lower for sucrose-grown cells than for glucose-grown cells. It was also noted that the pullulan content of the polysaccharide elaborated by the mutant strain was slightly higher than that of the polysaccharide produced by the parent strain after growth on either sucrose or glucose.     

低色素出芽短梗霉菌株的诱变筛选

通过紫外线和硫酸二乙酯(DES)诱变,获得一株黑色素分泌少的短梗霉变异菌株G-58。G-58菌落和发酵液颜色白色。经5次传代发酵表明该菌株稳定。     

Polysaccharide production by sponge-immobilized cells of the fungus Aureobasidium pullulans

T.P. WEST AND B.R.-H. STROHFUS. 1996. Cells of the fungus Aureobasidium pullulans ATCC 42023 were immobilized in sponge cubes and examined for their ability to elaborate the polysaccharide pullulan in relation to carbon source. It was found that fungal cells grown on corn syrup, sucrose or glucose as a carbon source could be immobilized in sponge cubes and that comparable cell weights and viable cell concentrations were immobilized. Independent of the carbon source tested, the immobilized fungal cells could be used at least three times for the production of polysaccharide. The immobilized A. pullulans cells elaborated the highest polysaccharide levels in the culture medium after 5–7 d of growth at 30°C.     

Polysaccharide production by Aureobasidium pullulans: factors affecting polysaccharide formation

Aureobasidium pullulans NRRL 6220 synthesized polysaccharide most actively in media containing sucrose, fructose or maltose with (NH₄)₂SO₄ (0.6 g/l) or ammonium acetate giving greatest yields of the polysaccharide. With (NH₄)₂SO₄ at 1.2 g/l, production of polysaccharide was decreased considerably. Polysaccharide production was highest with an initial pH of 6.5 while biomass formation was better below an initial pH of 5.5. Optimum phosphate concentration for polysaccharide production was 0.03 m.S.M. Badr-Eldin, H.G. El-Masry and O.A. Abd El-Rahman are with the Microbial Chemistry Department, National Research Center, Dokki, Cairo, Egypt; F.H.A. Mohamad is with the Chemical Engineering and Pilot Plant Department, National Research Center, Dokki, Cairo, Egypt. O.M. El-Tayeb is with the Microbiology Department, Faculty of Pharmacy, Cairo University, Egypt.     

Pullulan production from synthetic medium by a new mutant of Aureobasidium pullulans

Pullulan with different molecular-weight could be applied in various fields. A UV-induced mutagenesis Aureobasidium pullulans UVMU6-1 was obtained from the strain A. pullulans CGMCC3.933 for the production of low-molecular-weight pullulan. First, the obtained polysaccharide from A. pullulans UVMU6-1 was purified and identified to be pullulan with thin-layer chromatography, Fourier transform infrared, and nuclear magnetic resonance. Then, culture medium and conditions for this strain were optimized by flask fermentation. Based on the optimized medium and culture conditions (pH 4, addition of 4?g/L Tween 80 for 96?hr of cultivation), continuously fermentation was performed. The highest pullulan production and dry biomass was 109 and 125?g/L after fermentation for 114?hr, respectively. The average productivity was about 1?g/L/hr, which was intensively higher than the previous reported. This study would lay foundations for the industrial production of pullulan.     

Polysaccharide production by immobilized Aureobasidium pullulans cells in batch bioreactors.

Cells of the fungus Aureobasidium pullulans ATCC 201253 were entrapped within 4% agar cubes or 5% calcium alginate beads and were examined for their production of the polysaccharide pullulan in batch bioreactors. The batch bioreactors were utilized twice for 168 hours of polysaccharide production in medium containing corn syrup as a carbon source. The agar-entrapped cells produced nearly equivalent pullulan concentrations during both production cycles. The alginate-entrapped cells produced higher polysaccharide levels during the second cycle compared to the levels observed during the initial cycle. The agar-entrapped cells elaborated a polysaccharide with a higher pullulan content than did the alginate-entrapped cells during both production cycles.     

短梗霉多糖研究进展

短梗霉多糖是一种微生物发酵产物,具有极好的成膜性,无色、无味,且不透气,易生物降解,对人体和环境无毒无害,受到国际上广泛关注,是一种极具研究潜力和经济价值的新型生物环保材料。该文综合了国内外众多学者的研究成果,从发酵底物(包括碳源、氮源、二价离子等)、发酵条件(包括pH、温度、通气量、接种量、种龄等)、多糖性质、应用研究(包括传统应用和最新应用成果)等方面进行阐述,为短梗霉多糖的进一步研究和应用提供参考。     

Pullulan production from deproteinized whey by Aureobasidium pullulans

Aureobasidium pullulans P56 was investigated using an adaptation technique and a mixed culture system. The adaptation of A. pullulans and the mixed cultures of A. pullulans and/or Lactobacillus brevisX20, Debaryomyces hansenii 194 and Aspergillus niger did not increase the production of polysaccharide. Enzymic hydrolysis of lactose in deproteinized whey gave a higher polysaccharide concentration and polysaccharide yield than acidic hydrolysed lactose. Maximum polysaccharide concentration (11.0 ± 0.5 g L⁻¹), biomass dry weight (10.5 ± 0.4 g L⁻¹), polysaccharide yield (47.2 ± 1.8%) and sugar utilization (93.2 ± 2.8%) were achieved using enzyme-hydrolysed whey (pH 6.5) containing 25 g L⁻¹ lactose and supplemented with K₂HPO₄ 0.5%, L-glutamic acid 1%, olive oil 2.5%, and Tween 80 0.5%. In this case the pullulan content of the crude polysaccharide was 40%. Received 16 December 1997/ Accepted in revised form 12 March 1999     

Pullulan production from brewery wastes by Aureobasidium pullulans

The production of pullulan from brewery wastes by Aureobasidium pullulans in shake flask culture was investigated. The maximum pullulan concentration (6.0g/l) was obtained after 72h of fermentation. The external addition of nutrients into the spent grain liquor improved significantly the production of pullulan. In this case, the highest values of pullulan concentration (11.0±0.5g/l), pullulan yield (48.2±1.5%), and sugar utilization (99.0±0.5%) were obtained in the medium (pH 6.5–7.5) supplemented with K₂HPO₄ 0.5%, l-glutamic acid 1%, olive oil 2.5%, and Tween 800.5%.     

Extracellular cellulase production by tropical isolates of Aureobasidium pullulans

Cellulase production by Aureobasidium pullulans from the temperate regions has remained speculative, with most studies reporting no activity at all. In the current study, tropical isolates from diverse sources were screened for cellulase production. Isolates were grown on a synthetic medium containing cell walls of Msasa tree (Brachystegia sp.) as the sole carbon source, and their cellulolytic activities were measured using carboxymethyl cellulose and alpha-cellulose as substrates. All isolates studied produced carboxymethyl cellulase (endoglucanase) and alpha-cellulase (exoglucanase) activity. Endoglucanase-specific activities of ten selected isolates ranged from 2.375 to 12.884 micromol glucose.(mg protein)-1.h-1, while activities on alpha-cellulose (exoglucanase activity) ranged from 0.293 to 22.442 micromol glucose.(mg protein)-1.day-1. Carboxymethyl cellulose induced the highest cellulase activity in the selected isolates, while the isolates showed variable responses to nitrogen sources. The current study indicates that some isolates of A. pullulans of tropical origin produce significant extracellular cellulolytic activity and that crude cell walls may be good inducers of cellulolytic activity in A. pullulans.     

Optimization of tannase production by Aureobasidium pullulans DBS66

Tannase production by Aureobasidium pullulans DBS66 was optimized. The organism produced maximum tannase in the presence of 1% tannic acid after 36 h. Maximum gallic acid accumulation was observed within 36 h and tannic acid in the fermented broth was completely degraded after 42 h of growth. Glucose had a stimulatory effect on tannase synthesis at 0.1% (w/v) concentration. The organism showed maximum tannase production with (NH4)2HPO4 as nitrogen source. Shaking speed of 120 rpm and 50-ml broth volume have been found to be suitable for maximum tannase production.     

Lipase production by diverse phylogenetic clades of Aureobasidium pullulans

Thirty-nine strains representing 12 diverse phylogenetic clades of Aureobasidium pullulans were surveyed for lipase production using a quantitative assay. Strains in clades 4 and 10 produced 0.2–0.3 U lipase/ml, while color variant strain NRRL Y-2311-1 in clade 8 produced 0.54 U lipase/ml. Strains in clade 9, which exhibit a dark olivaceous pigment, produced the highest levels of lipase, with strain NRRL 62034 yielding 0.57 U lipase/ml. By comparison, Candida cylindracea strain NRRL Y-17506 produced 0.05 U lipase/ml under identical conditions. A. pullulans strain NRRL 62034 reached maximal lipase levels in 5 days on lipase induction medium, while A. pullulans strain NRRL Y-2311-1 and strains in clades 4 and 10 were highest after 6 days. A. pullulans strain NRRL Y-2311-1 and strains in clade 9 produced two extracellular proteins in common, at >50 and <37 kDa.     

Elevated polysaccharide production by mutants of the fungus Aureobasidium pullulans

Abstract Two mutants of the fungus Aureobasidium pullulans ATCC 42023 were isolated that exhibited elevated polysaccharide production. Both mutants were isolated using a combination of chemical mutagenesis and resistance to growth inhibitors. It was found that both mutants elaborated higher polysaccharide levels after 7 days of growth on corn syrup or sucrose, respectively, compared to ATCC 42023. The dry weights of the mutant cells were found not to differ greatly from those of the parent cells whether corn syrup or sucrose served as the carbon source. The pullulan content of the polysaccharide synthesized by the mutants or parent cells on sucrose was consistently lower than polysaccharide synthesized on corn syrup. Using corn syrup as a carbon source, the pullulan content of the polysaccharide elaborated by the parent was higher than either mutant. The inverse was found to occur with respect to pullulan content when the strains were grown on sucrose as a carbon source.     

Effect of two-stage temperature on pullulan production by Aureobasidium pullulans

The effect of a two-stage cultivation temperature on the production of pullulan synthesized by Aureobasidium pullulans CGMCC1234 was investigated. Pullulan production was affected by temperature; although the optimum temperature for pullulan production was 26°C, the optimal temperature for cell growth was 32°C. Maximum pullulan production was achieved by growing A. pullulans in a first stage of 32°C for 2 days, and then in a second stage of 26°C for 2 days. Pullulan production using these two-stage temperatures significantly increased: about 27.80% (w/w) compared to constant-temperature fermentation (26°C for 4 days). The morphology of the A. pullulans (CGMCC 1234) was also affected by temperature; the lower temperature (26°C) supported unicellular biomass growth. Results of this study indicate that fermentation using two temperature stages is a promising method for pullulan production.     

Short Communication: Effect of manganese on polysaccharide production and cellular pigmentation in the fungus Aureobasidium pullulans

Manganese supplementation resulted in higher polysaccharide levels and reduced cellular pigmentation by more than 8- or 17-fold after growth for 7d of the fungus Aureobasidium pullulans ATCC 42023 on sucrose or corn syrup, respectively, as a carbon source. The melanin content of the polysaccharide elaborated by ATCC 42023 cells also decreased if MnCl2 was added to the medium. The pullulan content of the polysaccharide synthesized by ATCC 42023 on sucrose was found to increase with increasing levels of manganese, whereas it was lower during growth on corn syrup if manganese was present.     

4-氯乙酰乙酸乙酯羰基还原酶产生菌的筛选及产酶条件研究

从实验室保藏的菌株中,筛选到一株立体选择性较高的产4-氯乙酰乙酸乙酯(COBE)羰基还原酶的菌株———出芽短梗霉(Aureobasidiumpullulans)SW0202,菌体产酶条件研究表明,最佳的发酵培养基配方为:麦芽糖30.0g/L,酵母膏20.0g/L,蛋白胨3.0g/L,(NH4)2SO45.0g/L,KH2PO42.0g/L,MgSO4.7H2O0.7g/L,最适发酵温度及初始pH分别为:28°C和pH6.0。该菌在此条件下发酵培养24h,产菌丝体生物量16.78g干菌体/L,COBE羰基还原酶酶活力达到1007U/L。在COBE的转化反应中,产物S-CHBE的浓度达到10.12g/L,光学纯度>97%e.e.。     

Siderophore production by the marine-derived Aureobasidium pullulans and its antimicrobial activity

Over 300 yeast strains isolated from different marine environments were screened for their ability to produce siderophore. Among them, only the yeast strain HN6.2 which was identified to be Aureobasidium pullulans was found to produce high level of the siderophore. Under the optimal conditions, this yeast strain could produce 1.1 mg/ml of the siderophore. The crude siderophore produced by the yeast strain HN6.2 was able to inhibit cell growth of Vibrio anguillarum and Vibrio parahaemolyticus, isolated from the diseased marine animals.     

Inorganic Sulfur Oxidation by Aureobasidium pullulans

Aureobasidium pullulans (de Bary) Arnaud isolated from the phylloplane of sycamore exposed to heavy atmospheric pollution oxidized S⁰ to S₂O₃²⁻, S₄O₆²⁻, and SO₄²⁻ in vitro. The intermediates S₂O₃²⁻ and S₄O₆²⁻ were also oxidized to SO₄²⁻. Cell-free extracts of A. pullulans also oxidized reduced forms of S, the oxidation increasing linearly with increasing protein concentration, showing that the process is enzymatic. The possible role of fungi in S oxidation in soils is discussed.