Reconstruction of chromosome rearrangements between the two most ancestral duckweed species <Emphasis Type="Italic">Spirodela polyrhiza</Emphasis> and <Emphasis Type="Italic">S. intermedia</Emphasis>

The monophyletic duckweeds comprising five genera within the monocot order Alismatales are neotenic, free-floating, aquatic organisms with fast vegetative propagation. Some species are considered for efficient biomass production, for life stock feeding, and for (simultaneous) wastewater phytoremediation. The ancestral genus Spirodela consists of only two species, Spirodela polyrhiza and Spirodela intermedia, both with a similar small genome (~160 Mbp/1C). Reference genome drafts and a physical map of 96 BACs on the 20 chromosome pairs of S. polyrhiza strain 7498 are available and provide useful tools for further evolutionary studies within and between duckweed genera. Here we applied sequential comparative multicolor fluorescence in situ hybridization (mcFISH) to address homeologous chromosomes in S. intermedia (2n = 36), to detect chromosome rearrangements between both species and to elucidate the mechanisms which may have led to the chromosome number alteration after their evolutionary separation. Ten chromosome pairs proved to be conserved between S. polyrhiza and S. intermedia, the remaining ones experienced, depending on the assumed direction of evolution, translocations, inversion, and fissions, respectively. These results represent a first step to unravel karyotype evolution among duckweeds and are anchor points for future genome assembly of S. intermedia.     

Complete chloroplast genome sequences of <Emphasis Type="Italic">Solanum commersonii</Emphasis> and its application to chloroplast genotype in somatic hybrids with <Emphasis Type="Italic">Solanum tuberosum</Emphasis>

Key message

Chloroplast genome of Solanum commersonii and S olanum tuberosum were completely sequenced, and Indel markers were successfully applied to distinguish chlorotypes demonstrating the chloroplast genome was randomly distributed during protoplast fusion.

Abstract

Somatic hybridization has been widely employed for the introgression of resistance to several diseases from wild Solanum species to overcome sexual barriers in potato breeding. Solanum commersonii is a major resource used as a parent line in somatic hybridization to improve bacterial wilt resistance in interspecies transfer to cultivated potato (S. tuberosum). Here, we sequenced the complete chloroplast genomes of Lz3.2 (S. commersonii) and S. tuberosum (PT56), which were used to develop fusion products, then compared them with those of five members of the Solanaceae family, S. tuberosum, Capsicum annum, S. lycopersicum, S. bulbocastanum and S. nigrum and Coffea arabica as an out-group. We then developed Indel markers for application in chloroplast genotyping. The complete chloroplast genome of Lz3.2 is composed of 155,525 bp, which is larger than the PT56 genome with 155,296 bp. Gene content, order and orientation of the S. commersonii chloroplast genome were highly conserved with those of other Solanaceae species, and the phylogenetic tree revealed that S. commersonii is located within the same node of S. tuberosum. However, sequence alignment revealed nine Indels between S. commersonii and S. tuberosum in their chloroplast genomes, allowing two Indel markers to be developed. The markers could distinguish the two species and were successfully applied to chloroplast genotyping (chlorotype) in somatic hybrids and their progenies. The results obtained in this study confirmed the random distribution of the chloroplast genome during protoplast fusion and its maternal inheritance and can be applied to select proper plastid genotypes in potato breeding program.

     

Reconstruction of molecular phylogeny of closely related <Emphasis Type="Italic">Amorphophallus</Emphasis> species of India using plastid DNA marker and fingerprinting approaches

Plastid DNA markers sequencing and DNA fingerprinting approaches were used and compared for resolving molecular phylogeny of closely related, previously unexplored Amorphophallus species of India. The utility of individual plastid markers namely rbcL, matK, trnH–psbA, trnLC–trnLD, their combined dataset and two fingerprinting techniques viz. RAPD and ISSR were tested for their efficacy to resolves Amorphophallus species into three sections specific clades namely Rhaphiophallus, Conophallus and Amorphophallus. In the present study, sequences of these four plastid DNA regions as well as RAPD and ISSR profiles of 16 Amorphophallus species together with six varieties of two species were generated and analyzed. Maximum likelihood and Bayesian Inference based construction of phylogenetic trees indicated that among the four plastid DNA regions tested individually and their combined dataset, rbcL was found best suited for resolving closely related Amorphophallus species into section specific clades. When analyzed individually, rbcL exhibited better discrimination ability than matK, trnH–psbA, trnLC–trnLD and combination of all four tested plastid markers. Among two fingerprinting techniques used, the resolution of Amorphophallus species using RAPD was better than ISSR and combination of RAPD +ISSR and in congruence with resolution based on rbcL.     

Graphical genotyping as a method to map <Emphasis Type="Italic">Ny</Emphasis><Subscript><Emphasis Type="Italic">(o,n)sto</Emphasis></Subscript> and <Emphasis Type="Italic">Gpa5</Emphasis> using a reference panel of tetraploid potato cultivars

Key message

The method of graphical genotyping is applied to a panel of tetraploid potato cultivars to visualize haplotype sharing. The method allowed to map genes involved in virus and nematode resistance. The physical coordinates of the amount of linkage drag surrounding these genes are easily interpretable.

Abstract

Graphical genotyping is a visually attractive and easily interpretable method to represent genetic marker data. In this paper, the method is extended from diploids to a panel of tetraploid potato cultivars. Application of filters to select a subset of SNPs allows one to visualize haplotype sharing between individuals that also share a specific locus. The method is illustrated with cultivars resistant to Potato virus Y (PVY), while simultaneously selecting for the absence of the SNPs in susceptible clones. SNP data will then merge into an image which displays the coordinates of a distal genomic region on the northern arm of chromosome 11 where a specific haplotype is introgressed from the wild potato species S. stoloniferum (CPC 2093) carrying a gene (Ny _(o,n)sto ) conferring resistance to two PVY strains, PVY^O and PVY^NTN. Graphical genotyping was also successful in showing the haplotypes on chromosome 12 carrying Ry-f _sto , another resistance gene derived from S. stoloniferum conferring broad-spectrum resistance to PVY, as well as chromosome 5 haplotypes from S. vernei, with the Gpa5 locus involved in resistance against Globodera pallida cyst nematodes. The image also shows shortening of linkage drag by meiotic recombination of the introgression segment in more recent breeding material. Identity-by-descent was found to be a requirement for using graphical genotyping, which is proposed as a non-statistical alternative method for gene discovery, as compared with genome-wide association studies. The potential and limitations of the method are discussed.

     

Tandem repeats analysis for the high resolution phylogenetic analysis of <Emphasis Type="Italic">Yersinia pestis</Emphasis>

Background

Yersinia pestis, the agent of plague, is a young and highly monomorphic species. Three biovars, each one thought to be associated with the last three Y. pestis pandemics, have been defined based on biochemical assays. More recently, DNA based assays, including DNA sequencing, IS typing, DNA arrays, have significantly improved current knowledge on the origin and phylogenetic evolution of Y. pestis. However, these methods suffer either from a lack of resolution or from the difficulty to compare data. Variable number of tandem repeats (VNTRs) provides valuable polymorphic markers for genotyping and performing phylogenetic analyses in a growing number of pathogens and have given promising results for Y. pestis as well.

Results

In this study we have genotyped 180 Y. pestis isolates by multiple locus VNTR analysis (MLVA) using 25 markers. Sixty-one different genotypes were observed. The three biovars were distributed into three main branches, with some exceptions. In particular, the Medievalis phenotype is clearly heterogeneous, resulting from different mutation events in the napA gene. Antiqua strains from Asia appear to hold a central position compared to Antiqua strains from Africa. A subset of 7 markers is proposed for the quick comparison of a new strain with the collection typed here. This can be easily achieved using a Web-based facility, specifically set-up for running such identifications.

Conclusion

Tandem-repeat typing may prove to be a powerful complement to the existing phylogenetic tools for Y. pestis. Typing can be achieved quickly at a low cost in terms of consumables, technical expertise and equipment. The resulting data can be easily compared between different laboratories. The number and selection of markers will eventually depend upon the type and aim of investigations.

     

Characterization of genome-wide microsatellite markers in rabbitfishes,an important resource for artisanal fisheries in the Indo-West Pacific

Rabbitfishes are reef-associated fishes that support local fisheries throughout the Indo-West Pacific region. Sound management of the resource requires the development of molecular tools for appropriate stock delimitation of the different species in the family. Microsatellite markers were developed for the cordonnier, Siganus sutor, and their potential for cross-amplification was investigated in 12 congeneric species. A library of 792 repeat-containing sequences was built. Nineteen sets of newly developed primers, and 14 universal finfish microsatellites were tested in S. sutor. Amplification success of the 19 Siganus-specific markers ranged from 32 to 79% in the 12 other Siganus species, slightly decreasing when the genetic distance of the target species to S. sutor increased. Seventeen of these markers were polymorphic in S. sutor and were further assayed in S. luridus, S. rivulatus, and S. spinus, of which respectively 9, 10 and 8 were polymorphic. Statistical power analysis and an analysis of molecular variance showed that subtle genetic differentiation can be detected using these markers, highlighting their utility for the study of genetic diversity and population genetic structure in rabbitfishes.     

Molecular insights into the origin of the brown rust resistance gene <Emphasis Type="Italic">Bru</Emphasis>1 among <Emphasis Type="Italic">Saccharum</Emphasis> species

Key message

Analysis of 387 sugarcane clones using Bru 1 diagnostic markers revealed two possible sources of Bru 1 in Chinese cultivars: one from Saccharum spontaneum and another from Saccharum robustum of New Guinea.

Abstract

Sugarcane brown rust (SBR) is an important fungal disease in many sugarcane production areas around the world, and can cause considerable yield losses in susceptible sugarcane cultivars. One major SBR resistance gene, named Bru1, initially identified from cultivar R570, was shown to be a major SBR resistance source in most of the sugarcane producing areas of the world. In this study, by using the two Bru1-associated markers, R12H16 and 9O20-F4, we surveyed the presence of Bru1 in a Chinese sugarcane germplasm collection of 387 clones, consisting of 228 hybrid cultivars bred by different Chinese sugarcane breeding establishments, 54 exotic hybrid cultivars introduced from other countries and 105 clones of sugarcane ancestral species. The Bru1-bearing haplotype was detected in 43.4% of Chinese sugarcane cultivars, 20.4% of exotic hybrid cultivars, and only 3.8% of ancestral species. Among the 33 Chinese cultivars for which phenotypes of resistance to SBR were available, Bru1 was present in 69.2% (18/26) of the resistant clones. Analyses of the allelic sequence variations of R12H16 and 9O20-F4 suggested two possible sources of Bru1 in Chinese cultivars: one from S. spontaneum and another from S. robustum of New Guinea. In addition, we developed an improved Bru1 diagnostic marker, 9O20-F4-HaeIII, which can eliminate all the false results of 9O20-F4-RsaI observed among S. spontaneum, as well as a new dominant Bru1 diagnostic marker, R12E03-2, from the BAC ShCIR12E03. Our results provide valuable information for further efforts of breeding SBR-resistant varieties, searching new SBR resistance sources and cloning of Bru1 in sugarcane.

     

Development of user-friendly markers for disease resistance to black root rot of tobacco through genotyping by sequencing

Black root rot (BRR), a disease caused by the hemibiotrophic fungus Thielaviopsis basicola, seriously compromises yield and leaf quality in tobacco (Nicotiana tabacum). Full resistance to black root rot, conferred by the resistance to BRR 1 (RBRR1) locus from Nicotiana debneyi Domin, was transferred to a burley tobacco cultivar through interspecific hybridization. Some undesirable traits potentially caused by linkage drag restrict wider application of RBRR1 in flue-cured tobacco. Therefore, user-friendly molecular markers are needed to assist selection for resistance to black root rot and to break the unfavorable linkage. Genotyping by sequencing (GBS) is a rapid and robust approach for reduced representation sequencing of multiplexed genomic DNA samples that combines genome-wide molecular marker discovery with genotyping. In the present study, we used GBS to identify single-nucleotide polymorphisms (SNPs) linked to the RBRR1 locus, and PCR-based assays for detection of these SNPs were also developed. Sequence analysis of the SNP markers suggested that RBRR1 is located on chromosome 17, providing a basis for map-based cloning of this valuable gene. Co-dominant CAPS markers that co-segregate with the disease-resistant phenotype offer user-friendly tools for tobacco breeding and variety improvement. Furthermore, tested with diverse N. tabacum germplasm, SS192650 displayed 100% selection accuracy for resistance to BRR, suggesting that this marker can be used in diverse tobacco populations.     

Construction and characterization of two BAC libraries representing a deep-coverage of the genome of chicory (<Emphasis Type="Italic">Cichorium intybus</Emphasis> L., Asteraceae)

Background

The Asteraceae represents an important plant family with respect to the numbers of species present in the wild and used by man. Nonetheless, genomic resources for Asteraceae species are relatively underdeveloped, hampering within species genetic studies as well as comparative genomics studies at the family level. So far, six BAC libraries have been described for the main crops of the family, i.e. lettuce and sunflower. Here we present the characterization of BAC libraries of chicory (Cichorium intybus L.) constructed from two genotypes differing in traits related to sexual and vegetative reproduction. Resolving the molecular mechanisms underlying traits controlling the reproductive system of chicory is a key determinant for hybrid development, and more generally will provide new insights into these traits, which are poorly investigated so far at the molecular level in Asteraceae.

Findings

Two bacterial artificial chromosome (BAC) libraries, CinS2S2 and CinS1S4, were constructed from Hin dIII-digested high molecular weight DNA of the contrasting genotypes C15 and C30.01, respectively. C15 was hermaphrodite, non-embryogenic, and S₂S₂ for the S-locus implicated in self-incompatibility, whereas C30.01 was male sterile, embryogenic, and S₁S₄. The CinS2S2 and CinS1S4 libraries contain 89,088 and 81,408 clones. Mean insert sizes of the CinS2S2 and CinS1S4 clones are 90 and 120 kb, respectively, and provide together a coverage of 12.3 haploid genome equivalents. Contamination with mitochondrial and chloroplast DNA sequences was evaluated with four mitochondrial and four chloroplast specific probes, and was estimated to be 0.024% and 1.00% for the CinS2S2 library, and 0.028% and 2.35% for the CinS1S4 library. Using two single copy genes putatively implicated in somatic embryogenesis, screening of both libraries resulted in detection of 12 and 13 positive clones for each gene, in accordance with expected numbers.

Conclusions

This indicated that both BAC libraries are valuable tools for molecular studies in chicory, one goal being the positional cloning of the S-locus in this Asteraceae species.

     

Multiplex Genotyping of Allelic Variants of Genes Involved in Metabolizing Antileukemic Drugs

A biochip, primer set, and genotyping protocol were developed to simultaneously address 16 single nucleotide polymorphisms in antileukemic drug metabolism genes, including TPMT, ITPA, MTHFR, SLCO1B1, SLC19A1, NR3C1, GRIA1, ASNS, MTRR, and ABCB1. The genotyping procedure included a one-round multiplex polymerase chain reaction (PCR) with simultaneous incorporation of a fluorescent label into the PCR product and subsequent hybridization on a biochip with immobilized probes. The method was used to test 65 DNA samples of leukemia patients. Fluorescence signal intensity ratios in pairs of wildtype and respective mutant sequence probes were analyzed for all polymorphic markers and demonstrated high accuracy of genotyping. The reliability of genotype determination using the biochip was confirmed by direct Sanger sequencing.     

Authentication of five <Emphasis Type="Italic">Barilius</Emphasis> species from Indian waters using DNA barcoding

Authentic identification of fish species is essential for conserving them as a valuable genetic resource in our environment. DNA barcoding of living beings has become an important and ultimate tool for establishing their molecular identity. Among cyprinids, Barilius is an important genus having nearly 23 species in Indian region whose morphological identification is often difficult due to minute differences in their features. Five species collected from Indian waters and primarily identified as Opsarius bakeri (syn. Barilius bakeri), B. gatensis, B. vagra, B. bendelisis and B. ngawa were authenticated by their DNA barcoding based on mitochondrial COI gene sequences. Five individuals of each species were taken for barcode preparation by COI gene sequencing which yielded one barcode for B. ngawa, two barcodes each for O. bakeri, B. gatensis, B. bendelisis and three barcodes for B. vagra. The order of inter and intra-specific variation was estimated to know a preliminary status of variation prevailing in these cold stream fish species significant for evolution and conservation of these valued species of our ichthyofauna. Average variation within genera was found to be 13.6% with intra-specific variation ranging from 0.0% (B. ngawa) to 0.6% (B. gatensis). These distance data are in the same order found by various researchers globally using COI barcode sequences in different fish species. Phylogenetic relatedness among Barilius species and some other cyprinids validate their status of individual species as established by conventional taxonomy.     

Fingerprinting by amplified fragment length polymorphism (AFLP) and barcoding by three plastidic markers in the genus <Emphasis Type="Italic">Wolffiella</Emphasis> Hegelm

Amplified fragment length polymorphism (AFLP) fingerprinting and three different plastidic DNA regions (rpl16, rps16, atpF-atpH) were used to investigate species identity in the genus Wolffiella. For this purpose, clones (67 in total) belonging to all ten species were selected. Almost all the species were represented by more than one clone. The fingerprinting technique, AFLP, clearly distinguished the species, W. caudata, W. gladiata, W. neotropica, W. rotunda, and W. welwitschii. Apart from confirming the molecular identity of these five species, the plastidic markers could delineate two additional species, W. hyalina and W. denticulata, although the conclusion concerning the latter is restricted by the availability of only one clone. The efficiency of the plastid-derived markers in identifying the number of species-specific clusters followed the sequence rps16 > rpl16 > atpF-atpH. The species W. lingulata, W. oblonga, and W. repanda could not be identified by any of the molecular methods presented here, but could be strictly defined on a morphological basis. In several clones, high amounts of genetic admixtures between different species were detected. Further, simulation studies demonstrated that these clones are genetic hybrids. This might be one of the obstacles in molecular identification of species in the genus Wolffiella.     

An integrative AmpSeq platform for highly multiplexed marker-assisted pyramiding of grapevine powdery mildew resistance loci

Resistance breeding often requires the introgression and tracking of resistance loci from wild species into domesticated backgrounds, typically with the goal of pyramiding multiple resistance genes, to provide durable disease resistance to breeding selections and ultimately cultivars. While molecular markers are commonly used to facilitate these efforts, high genetic diversity and divergent marker technologies can complicate marker-assisted breeding strategies. Here, amplicon sequencing (AmpSeq) was used to integrate SNP markers with dominant presence/absence markers derived from genotyping-by-sequencing and other genotyping technologies, for the simultaneous tracking of five loci for resistance to grapevine powdery mildew. SNP haploblocks defined the loci for REN1, REN2 and REN3, which confer quantitative resistance phenotypes that are challenging to measure via field ratings of natural infections. Presence/absence markers for RUN1 and REN4 were validated to predict qualitative resistance phenotypes and corresponded with previous presence/absence fluorescent electrophoretic assays. Thus, 37 AmpSeq-derived markers were identified for the five loci, and markers for REN1, REN2, REN4 and RUN1 were used for multiplexed screening and selection within diverse breeding germplasm. Poor transferability of SNP markers indicated imperfect marker-trait association in some families. Together, AmpSeq SNP haploblocks and presence/absence markers provide a high-throughput, cost-effective tool to integrate divergent technologies for marker-assisted selection and genetic analysis of introgressed disease resistance loci in grapevine.     

Evolution of blue-flowered species of genus <Emphasis Type="Italic">Linum</Emphasis> based on high-throughput sequencing of ribosomal RNA genes

Background

The species relationships within the genus Linum have already been studied several times by means of different molecular and phylogenetic approaches. Nevertheless, a number of ambiguities in phylogeny of Linum still remain unresolved. In particular, the species relationships within the sections Stellerolinum and Dasylinum need further clarification. Also, the question of independence of the species of the section Adenolinum still remains unanswered. Moreover, the relationships of L. narbonense and other species of the section Linum require further clarification. Additionally, the origin of tetraploid species of the section Linum (2n?=?30) including the cultivated species L. usitatissimum has not been explored. The present study examines the phylogeny of blue-flowered species of Linum by comparisons of 5S rRNA gene sequences as well as ITS1 and ITS2 sequences of 35S rRNA genes.

Results

High-throughput sequencing has been used for analysis of multicopy rRNA gene families. In addition to the molecular phylogenetic analysis, the number and chromosomal localization of 5S and 35S rDNA sites has been determined by FISH.Our findings confirm that L. stelleroides forms a basal branch from the clade of blue-flowered flaxes which is independent of the branch formed by species of the sect. Dasylinum. The current molecular phylogenetic approaches, the cytogenetic analysis as well as different genomic DNA fingerprinting methods applied previously did not discriminate certain species within the sect. Adenolinum. The allotetraploid cultivated species L. usitatissimum and its wild ancestor L. angustifolium (2n?=?30) could originate either as the result of hybridization of two diploid species (2n?=?16) related to the modern L. gandiflorum and L. decumbens, or hybridization of a diploid species (2n?=?16) and a diploid ancestor of modern L. narbonense (2n?=?14).

Conclusions

High-throughput sequencing of multicopy rRNA gene families allowed us to make several adjustments to the phylogeny of blue-flowered flax species and also reveal intra- and interspecific divergence of the rRNA gene sequences.

     

Molecular characterization of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> isolates from various healthcare institutions in Nairobi,Kenya: a cross sectional study

Background

Staphylococcus aureus (S. aureus) has established itself over the years as a major cause of morbidity and mortality both within the community and in healthcare settings. Methicillin resistant S. aureus (MRSA) in particular has been a major cause of nosocomial infections resulting in significant increase in healthcare costs. In Africa, the MRSA prevalence has been shown to vary across different countries. In order to better understand the epidemiology of MRSA in a setting, it is important to define its population structure using molecular tools as different clones have been found to predominate in certain geographical locations.

Methods

We carried out PFGE, MLST, SCCmec and spa typing of selected S. aureus isolates from a private and public referral hospital in Nairobi, Kenya.

Results

A total of 93 S. aureus isolates were grouped into 19 PFGE clonal complexes (A–S) and 12 singletons. From these, 55 (32 MRSA and 23 MSSA) representative isolates from each PFGE clonal complex and all singletons were spa typed. There were 18 different MRSA spa types and 22 MSSA spa types. The predominant MRSA spa type was t037 comprising 40.6 % (13/32) of all MRSA. In contrast, the MSSA were quite heterogeneous, only 2 out of 23 MSSA shared the same spa type. Two new MRSA spa types (t13149 and t13150) and 3 new MSSA spa types (t13182, t13193 and t13194) were identified. The predominant clonal complex was CC 5 which included multi-locus sequence types 1, 8 and 241.

Conclusion

In contrast to previous studies published from Kenya, there’s marked genetic diversity amongst clinical MRSA isolates in Nairobi including the presence of well-known epidemic MRSA clones. Given that these clones are resident within our referral hospitals, adherence to strict infection control measures needs to be ensured to reduce morbidity and mortality associated with hospital acquired MRSA infections.

     

A report on identification of sequence polymorphism in barcode region of six commercially important <Emphasis Type="Italic">Cymbopogon</Emphasis> species

Cymbopogon

is an important member of grass family Poaceae, cultivated for essential oils which have greater medicinal and industrial value. Taxonomic identification of Cymbopogon species is determined mainly by morphological markers, odour of essential oils and concentration of bioactive compounds present in the oil matrices which are highly influenced by environment. Authenticated molecular marker based taxonomical identification is also lacking in the genus; hence effort was made to evaluate potential DNA barcode loci in six commercially important Cymbopogon species for their individual discrimination and authentication at the species level. Four widely used DNA barcoding regions viz., ITS 1 & ITS 2 spacers, matK, psbA-trnH and rbcL were taken for the study. Gene sequences of the same or related genera of the concerned loci were mined from NCBI domain and primers were designed and validated for barcode loci amplification. Out of the four loci studied, sequences from matK and ITS spacer loci revealed 0.46% and 5.64% nucleotide sequence diversity, respectively whereas the other two loci i.e., psbA-trnH and rbcL showed 100% sequence homology. The newly developed primers can be used for barcode loci amplification in the genus Cymbopogon. The identified Single Nucleotide Polymorphisms from the studied sequences may be used as barcodes for the six Cymbopogon species. The information generated can also be utilized for barcode development of the genus by including more number of Cymbopgon species in future.

     

Detection of Cryptic <Emphasis Type="Italic">Candida</Emphasis> Species Recognized as Human Pathogens Through Molecular Biology Techniques

Purpose of Review

The aim of this review is to evaluate these molecular-based methods able to identify pathogenic cryptic Candida spp. focusing on those that demonstrated to be useful in clinical laboratory settings.

Recent Findings

It is long known that some Candida spp. are genetically heterogeneous. Firstly, individual species were divided into groups based on differences on the sequence of some genes. Later, those groups were designated as cryptic species and defined as phenotypically indistinguishable species that are only identified by their DNA sequences. Many common Candida spp. are now considered complexes formed by several cryptic species. Some of them have been recognized as human pathogens. The identification of these species is problematic but necessary since they have different host range, infection sites, infection severity, and antifungal susceptibility. Several independent DNA markers were proposed as tools for the differentiation of highly related species. We will concentrate on the three species complexes most frequently associated with human infections including Candida albicans, C. glabrata, and C. parapsilosis complexes and a fourth group of less common but multiresistant species including C. haeumulonii complex and C. auris.

Summary

We review the clinically useful molecular tools able to differentiate the cryptic species of C. albicans, C. glabrata, and C. parapsilosis complexes and designated to uncover emerging multiresistant species.

     

New microsatellite markers developed from <Emphasis Type="Italic">Urochloa humidicola</Emphasis> (Poaceae) and cross amplification in different <Emphasis Type="Italic">Urochloa</Emphasis> species

Background

Urochloa humidicola is a forage grass that grows in tropical regions and is recognized for its tolerance to seasonal flooding. It is a polyploid and apomictic species with high phenotypic plasticity. As molecular tools are important in facilitating the development of new cultivars and in the classification of related species, the objectives of this study were to develop new polymorphic microsatellite markers from an enriched library constructed from U. humidicola and to evaluate their transferability to other Urochloa species.

Findings

Microsatellite sequences were identified from a previously constructed enriched library, and specific primers were designed for 40 loci. Isolated di-nucleotide repeat motifs were the most abundant followed by tetra-nucleotide repeats. Of the tested loci, 38 displayed polymorphism when screened across 34 polyploid Urochloa sp. genotypes, including 20 accessions and six hybrids of U. humidicola and two accessions each from U. brizantha, U. dictyoneura, U. decumbens and U. ruziziensis. The number of bands per Simple Sequence Repeat (SSR) locus ranged from one to 29 with a mean of 11.5 bands per locus. The mean Polymorphism Information Content (PIC) of all loci was 0.7136, and the mean Discrimination Power (DP) was 0.7873. Six loci amplified in all species tested. STRUCTURE analysis revealed six different allelic pools, and the genetic similarity values analyzed using Jaccard's coefficient ranged from 0.000 to 0.913.

Conclusions

This work reports new polymorphic microsatellite markers that will be useful for breeding programs for Urochloa humidicola and other Urochloa species as well as for genetic map development, germplasm characterization, evolutionary and taxonomic studies and marker-assisted trait selection.