Electrochemical detection of DNA hybridization using a change in flexibility

A novel electrochemical method of detecting DNA hybridization is presented based on the change in flexibility between the single and double stranded DNA. A recognition surface based on gold nanoparticles (GNPs) is firstly modified via mixing self-assembled monolayer of thiolated probe DNA and 1,6-hexanedithiol. The hybridization and electrochemical detection are performed on the surface of probe-modified GNPs and electrode, respectively. Here in our method the charge transfer resistance (R(ct)) signal is enhanced by blocking the surface of electrode with DNA covered GNPs. The GNPs will be able to adsorb on the gold electrode when covered with flexible single stranded DNA (ssDNA). On the contrary, it will be repelled from the electrode, when covered with stiff double stranded DNA (dsDNA). Therefore, different R(ct) signals are observed before and after hybridization. The hybridization events are monitored by electrochemical impedance spectroscopy (EIS) measurement based on the R(ct) signals without any external labels. This method provides an alternative route for expanding the range of detection methods available for DNA hybridization.     

Analysis of polymerase chain reaction products by high-performance liquid chromatography with fluorimetric detection and its application to DNA diagnosis

We describe the development of a sensitive high-performance liquid chromatographic (HPLC) method for polymerase chain reaction (PCR) products using bisbenzimide (Hoechst 33258 dye) based fluorimetric detection. The detection limit and specificity for double-strand DNA detection are improved in comparison with HPLC with UV absorbance detection. This HPLC, using a column packed with diethylaminoethyl-bonded non-porous resin particles, was applied to the detection of allele-specific PCR and restriction fragment length polymorphism analysis. We also developed a hybridization method analyzed by HPLC. DNA fragments (149 bp) containing the mutation site (C→A,G,T) in the N-ras gene were amplified by PCR. Fluorescein isothiocyanate (FITC)-labeled DNA probes were also prepared by PCR using FITC-labeled 5′ primer. Analysis of mutation was performed by the separation of a hybrid and non-reactive DNA probe with HPLC with fluorimetric detection after the hybridization of target DNA (149 bp) and a FITC DNA probe. The effects of various factors on hybridization were examined to establish optimal assay conditions. Under the conditions determined, a point mutation in PCR products obtained from the N-ras gene could be detected specifically by this method. The analysis of PCR products by HPLC may potentially be useful for DNA diagnosis.     

A rapid method of gene detection using DNA bound to Sephacryl

A rapid method of gene detection has been developed utilising DNA fragments immobilized on resins and a sandwich hybridization assay. This method permits the detection of restriction fragment length polymorphisms (RFLPs) without the need to immobilize sample DNA. The method is based on the use of two non-overlapping DNA restriction fragments, one of which is attached to a resin (fragment A) and the other 32P-labelled (fragment B). Fragments A and B will not hybridize to each other unless there is a DNA or RNA fragment capable of hybridizing to both A and B present in the same reaction. Hybridization in this instance will result in the resin being radioactively labelled. The RFLP associated with the mutation causing sickle-cell anaemia was used as a model to develop the method. The resin Sephacryl S-500 appeared most suited to our method for two reasons: (i) DNA immobilization experiments using two coupling procedures and four resins indicated that Sephacryl S-500 bound the most DNA with very little non-covalent coupling. (ii) Hybridization experiments with DNA bound to a number of resins showed that DNA bound to Sephacryl S-500 hybridized most efficiently with a low level of nonspecific hybridization. Using optimum hybridization conditions 5 X 10(-18) mol of beta-globin DNA could be detected. The method has been used to distinguish between DNA from sickle, heterozygote and normal patients.     

Species-Specific Detection of Vibrio anguillarum in Marine Aquaculture Environments by Selective Culture and DNA Hybridization

Methods for specific detection of Vibrio anguillarum in complex microbial communities within diverse marine aquaculture environments were evaluated. A system for the detection of culturable cells based on the combined use of a selective medium and a nonradioactively labeled oligodeoxynucleotide complementary to 16S rRNA was developed. Four hundred fourteen bacterial cultures were evaluated in order to assess the specificity of the method. When both the selective medium and the specific probe gave positive results, the cultures were always identified as V. anguillarum. The selectivity for colony hybridization was 1 V. anguillarum cell in 10,000 total bacterial cells in environmental samples. The utility of the method was also compared with detection by dot blot hybridization of either raw DNA purified from environmental samples or PCR-amplified DNA of 16S rRNA genes, using universal eubacterial primers. The post-PCR hybridization was more sensitive (8 x 10(sup2) cells) than direct hybridization of the whole purified DNA (10(sup6) cells). However, the selective medium-probe combined method was as sensitive as post-PCR hybridization, albeit more specific.     

Label-free electrochemical detection of DNA using ferrocene-containing cationic polythiophene and PNA probes on nanogold modified electrodes

A label-free electrochemical method for the detection of DNA-PNA hybridization using a water-soluble, ferrocene-functionalized polythiophene transducer and single-stranded PNA probes on the nanogold modified electrode is investigated. Nanogold modified electrodes can largely increase the immobilization amount of ss-PNA capture probe and lead to an increase of the electrical signal. The ferrocene-containing cationic polythiophene do not interact electrostatically with the PNA probes due to the absence of the anionic phosphate groups on the PNA probes. But after DNA-PNA hybridization, cationic polythiophene is adsorbed on the DNA backbone, giving a clear hybridization detection signal in differential pulse voltammetry (DPV). Very good discrimination against non-complementary DNA and four-base mismatch DNA is observed. These studies show that the proposed method can provide an alternative for expanding the range of detection methods available for DNA hybridization.     

电场驱动微悬臂生物传感器及对DNA 的快速、高灵敏度检测

微悬臂列阵传感器在生物检测方面具有快速、痕量和非标记的特性. 我们以镀金并在其上固定了 DNA 探针的微悬臂为正极,在靶杂交液槽内引入另一电极作为负极,构成电场驱动微悬臂 DNA 生物传感器. 对该传感器系统施加静电场,驱动 DNA 分子朝正极迁移,使溶液中的 DNA 分子富集在微悬臂上,促进 DNA 分子的杂交. 结果表明： a. DNA 在微悬臂上的杂交时间仅需 3 min,加快了微悬臂生物传感器对 DNA 分子的检测速度; b. 提高了微悬臂生物传感器的灵敏度,可以检测到皮克级的 DNA 分子.     

Proof of hepatitis A virus negative-sense RNA by RNA/DNA-hybrid detection: a method for specific detection of both viral negative- and positive-strand RNA species.

The detection of hepatitis A virus (HAV) negative-strand RNA, which is synthesized during replication of the positive-strand RNA genome, proved to be difficult. We developed a method for the specific detection of HAV negative-strand RNA by RNA-DNA hybridization and luminescence detection using an anti-RNA:DNA hybrid antibody. This method, which is also applicable for the specific detection of positive-strand RNA, offers a simple, yet relatively rapid and certain means of detecting low amounts of RNA such as HAV negative-strand RNA. By using appropriate hybridization DNA probes, the method should be applicable for the detection of single-stranded RNA species of different viruses in general.     

Construction of DNA biosensor at glassy carbon surface modified with 4-aminoethylbenzenediazonium salt

A simple, label-free electrochemical impedance-spectroscopy method for sequence-specific detection of DNA using a 4-aminoethylbenzenediazonium (AEBD) salt as a binder for amino-modified probe DNA is reported. This novel method simplifies the anchoring of DNA at the GC surface and opens new ways for the detection of hybridization. The hybridization of target DNA, without and with mismatches, with the probe DNA anchored at the GC surface modified with AEBD, greatly increases the interfacial electron transfer resistance at the double-stranded DNA modified electrodes for the redox couple Fe(CN)(6)(3-/4-). The resistance was measured using electrochemical impedance spectroscopy. The sensor response increased linearly with logarithm of concentration of target DNA in the range 2×10(-12)÷2×10(-6) M. The obtained quantification limit was circa 6.5×10(-17) mole in a 7 μL droplet and corresponded to a concentration of 9.2×10(-12) M of target DNA in the sample. This limit is equivalent to the detection of circa 4×10(7) copies of DNA in a 7 μL droplet or circa 5.7×10(12) DNA copies in one litre of sample.     

Detection of small, single-copy genes on protein-G-banded chromosomes by electron microscopy.

A method for the detection by electron microscopy of chromosome banding after in situ hybridization of small, nonradioactive DNA sequences is described. Typical high-resolution G-banding is produced by adding 5-bromodeoxyuridine (BrdU) during the last part of the S-phase and by applying a monoclonal antibody against the BrdU-substituted chromosome segments, followed by the addition of protein G, but no further treatment. A protocol for in situ hybridization of small, single-copy biotinylated DNA sequences and their detection by immunogold tagging on banded chromosomes is also described. This combined approach permits high-resolution mapping of small DNA sequences and should be useful in discriminating between neighboring DNA fragments.     

An alternative nonradioactive method for labeling DNA using biotin

An alternative nonradioactive labeling method and a highly sensitive technique for detecting specific DNA sequences are described. The labeling method requires the "Klenow" fragment of DNA polymerase I and random hexanucleotides (synthesized or naturally extracted) as a primer for the production of highly sensitive DNA probes. The system has three main steps: (i) labeling of DNA with biotinylated 11-dUTP; (ii) detection of biotinylated DNA by a one-step procedure with streptavidin-alkaline phosphatase complex; (iii) blocking of background with Tween 20. Twenty attograms (2 X 10(-17) g) of pBR322 plasmid DNA was detected by dot-blot hybridization. Upon Southern blot hybridization, 7.4 fg (7.4 X 10(-15) g) of pBR322 HindIII DNA was detected using the biotinylated pBR322 plasmid DNA probe; 40.8 ag and 7.4 fg of lambda HindIII DNA were detected with the biotinylated whole lambda DNA probe by dot and Southern blot hybridization, respectively. Specific bands were also detected with the biotinylated argininosuccinolyase probe upon Northern blotting of mouse poly(A+) RNA. Further applications for in situ hybridization are also described.     

Electrochemical DNA hybridization detection using peptide nucleic acids and [Ru(NH3)6]3+ on gold electrodes

An electrochemical DNA hybridization detection method based on the electrostatic interactions of [Ru(NH3)6]3+ cations with the anionic phosphate backbone of DNA is proposed. PNA molecules are immobilized as capture probes on the gold substrate. The cationic ruthenium complexes do not interact electrostatically with the PNA probes due to the absence of the anionic phosphate groups on the PNA probes. But after hybridization, [Ru(NH3)6]3+ is adsorbed on the DNA backbone, giving a clear hybridization detection signal in ac voltammetry. The analytical parameters (sensitivity, selectivity and reproducibility) are evaluated. Very good discrimination against the single-base mismatch A2143G, internal to the 23S rRNA gene of Helicobacter pylori, is observed. Moreover the system is successfully applied to the detection of complementary PCR amplicons.     

时间分辨荧光分析法在DNA探针检测中的初步应用

应用时间分辨荧光技术进行核酸杂交分析,选用自制整合剂异硫氰酸苯基-EDTA将铕离子标记连接于链霉亲和素分子中,通过光化学反应制备生物素标记pUC118DNA探针,与固定在聚苯乙烯微滴板中的靶DNA杂交后,以铕离子Eu(3+)标记的链霉亲和素为检测物,检测靶DNA的含量,可检测到30pg的靶DNA．     

Detection of Pseudomonas putida B in the rhizosphere by RAPD

A method was developed for the detection of Pseudomonas putida B MM12 released into the rhizosphere of non-sterile barley, using a Random Amplified Polymorphic DNA (RAPD)-generated probe for hybridization with RAPD products generated from DNA extracted from the rhizosphere. The detection procedure involves extraction of rhizosphere bacteria by sonication, extraction of DNA by boiling, RAPD and Southern hybridization with RAPD products and the selected probe. The level of detection of MM12 was at least 1·9×10⁴ cells g⁻¹ barley root. MM12 was detected in rhizosphere when it constituted as little as 0·5% of the culturable population.     

Computer assisted signal co-localization for simultaneous detection of antigen by immunohistochemistry and DNA by non-isotopic in situ hybridization

A method has been developed to co-localize signals for antigen and DNA using a desktop microcomputer system (computer assisted signal co-localization). Antigens were detected by standard immunohistochemical methods and DNA was detected by non-isotopic in situ hybridization (NISH). Using this method, NISH signals can be precisely located in cells with well-preserved morphology captured by computer. The removal of the first immunohistochemical reaction products and reagents eliminates possible interference with hybridization and non-specific binding to the probe; therefore the sensitivity of the original NISH method remains. The captured NISH signals can be converted to any other colour which contrasts with the immunostaining. We have used detection of Epstein-Barr virus (EBV) and keratins as a model system. This method is straightforward, and with necessary modifications, will be applicable to any type of combined immunohistochemistry and in situ hybridization technique for simultaneous detection of antigen and nucleic acids or two types of nucleic acids in the same cells.     

Label-free and high-sensitive detection of Salmonella using a surface plasmon resonance DNA-based biosensor

A method based on surface plasmon resonance (SPR) DNA biosensor has been developed for label-free and high-sensitive detection of Salmonella. A biotinylated single-stranded oligonucleotide probe was designed to target a specific sequence in the invA gene of Salmonella and then immobilized onto a streptavidin coated dextran sensor surface. The invA gene was isolated from bacterial cultures and amplified using a modified semi-nested asymmetric polymerase chain reaction (PCR) technique. In order to investigate the hybridization detection, experiments with different concentration of synthetic target DNA sequences have been performed. The calibration curve of synthetic target DNA had good linearity from 5 nM to 1000 nM with a detection limit of 0.5 nM. The proposed method was applied successfully to the detection of single-stranded invA amplicons from three serovars of Salmonella, i.e., Typhimurium, Enterica and Derby, and the responses to PCR products were related to different S. typhimurium concentrations in the range from 10(2) to 10(10) CFU mL(-1). While with this system to detect E. coli and S. aureus, no significant signal was observed, demonstrating good selectivity of the method. In addition, the hybridization can be completed within 15 min, and the excellent sensor surface regeneration allows at least 300 assay cycles without obvious loss of performance.     

Human Papillomavirus Detection In Cervical Cells By In Situ Hybridization With Biotinylated Probes

We have investigated the applicability of human papillomavirus (HPV) DNA detection by in situ hybridization with biotinylated probes in epithelial cells obtained from the cervix using a cotton tip swab. We describe a simple procedure for obtaining homogeneous cell samples and good preservation of cellular structure. This is achieved by pretreatment of cells with L-cysteine before hybridization. Separate denaturation of cellular DNA and probe DNA is also necessary for satisfactory results. Both benign HPV DNA 6/11 and potentially oncogenic HPV DNA 16/18 could be identified in our series. In situ hybridization on cervical scrapes is a rapid, simple and very specific method for detecting patients infected with oncogenic HPV types.     

Hybridization assay at a disposable electrochemical biosensor for the attomole detection of amplified human cytomegalovirus DNA

A disposable electrochemical biosensor for the detection of DNA sequences related to the human cytomegalovirus (HCMV) is described. The sensor relies on the adsorption of an amplified human cytomegalovirus DNA strand onto the sensing surface of a screen-printed carbon electrode, and to its hybridization to a complementary single-stranded biotinylated DNA probe. The extent of hybrids formed was determined with streptavidin conjugated to horseradish peroxidase. The peroxidase label was indirectly quantified by measuring the amount of the chromophore and electroactive product 2,2'-diaminoazobenzene generated from the o-phenylenediamine substrate. The intensity of differential pulse voltammetric peak currents resulting from the reduction of the enzyme-generated product was related to the number of target HCMV-amplified DNA molecules present in the sample, and the results were compared to those obtained with standard methods, i.e., agarose gel electrophoresis quantification and colorimetric hybridization assay in a microtiter plate. A detection limit of 0.6 amol/ml of HCMV-amplified DNA fragment was obtained with the electrochemical DNA biosensor. The electrochemical method was 23,000-fold more sensitive than the gel electrophoresis technique and 83-fold more sensitive than the colorimetric hybridization assay in a microtiter plate.     

Determination of Herpes simplex virus DNA with the use of solid-phase methods for the detection of PCR products

To determine DNA of herpes simplex virus (HSV), types 1 and 2, the polymerase chain reaction (PCR) method was developed with the subsequent detection of amplification products by means of electrophoresis or the molecular hybridization of nucleic acids (MHNA). Two variants of MHNA have been compared: hybridization in the solution of a biotinylated probe with digoxigenin-labeled PCR with the subsequent sorption of hybridization complexes onto streptavidin-covered plates and solid-phase hybridization of digoxigenin-labeled PCR with a biotinylated probe. Effective hybridization was observed after the denaturation of targets at 95 degrees C in the solution of 50 mM NaOH, but not in neutral solutions. To increase the level of sensitivity of hybridization in solution, the exact selection of the amount of the probe was shown to be necessary, for both its excess and deficiency essentially decreased the method sensitivity. A decrease in the ionic power of hybridization solutions from 6 h SSC to 1 h SSC led to greater specificity of hybridization without a decrease in the method sensitivity. A rise in the temperature of hybridization and subsequent washing to 45 degrees C decreased the sensitivity of the method. The limit of the sensitivity PCR with electrophoretic detection was 30 HSV genome equivalents, and 10 genome equivalents in the presence MHNA in the solution and on the solid phase.     

A visual DNA probe for detection of enterotoxigenic Escherichia coli by colony hybridization

A colony hybridization method for visual detection of heat-labile enterotoxin (LT)-producing Escherichia coli has been developed. The interchangeability of probe DNA in the system offers the advantage of a more definitive indicator and detection procedure over current plating procedures. Preliminary studies have demonstrated complete specificity of the visual probe for target DNA. This model system has potential for use as a more definitive indicator method for the examination of foods and wastewater for LT toxin genes.     

Development of a magnetic capture hybridization-PCR assay for Listeria monocytogenes direct detection in milk samples

AIMS: A rapid and sensitive method for Listeria monocytogenes direct detection from milk was developed. It is based on a magnetic capture hybridization procedure for selective DNA purification, followed by PCR identification. A comparison with two similar commercial systems from Dynal (Dynabeads) was carried out. METHODS AND RESULTS: The technique used previously developed nanoparticles modified with a 21-mer oligonucleotide. This sequence, sharing homology with all the L. monocytogenes strains, was selected on hlyA gene and located outside the desired specific PCR site to avoid cross-contaminations. Capture probe properties, in term of spacer length and purification, were determined to obtain the highest hybridization efficiency. Its specificity was tested in hybridization experiments with nontarget bacterial species. Any inhibitory effect of the nanoparticles on PCR was also examined. The amplification performed with the purified DNA could reliably identify a 10 CFU ml(-1) contamination rate. CONCLUSIONS: The optimized purification method showed a high specificity and sensitivity, with a detection level one log more sensitive than PCR carried out with nucleic acids obtained using commercial nanoparticles. SIGNIFICANCE AND IMPACT OF THE STUDY: The method, avoiding pre-enrichment, provides a rapid alternative to conventional microbiological detection methods. Furthermore, it is suitable for automation and can be proposed for the screening of a large number of samples.