Insights into the structural determinants of cohesin-dockerin specificity revealed by the crystal structure of the type II cohesin from Clostridium thermocellum SdbA

The plant cell wall degrading enzymes expressed by anaerobic microorganisms form large multienzyme complexes (cellulosomes). Cellulosomes assemble by the Type I dockerins on the catalytic subunits binding to the reiterated Type I cohesins in the molecular scaffold, while Type II dockerin-cohesin interactions anchor the complex onto the bacterial cell surface. Type I and Type II cohesin, dockerin pairs show no cross-specificity. Here we report the crystal structure of the Type II cohesin (CohII) from the Clostridium thermocellum cell surface anchoring protein SdbA. The protein domain contains nine beta-strands and a small alpha-helix. The beta-strands assemble into two elongated beta-sheets that display a typical jelly roll fold. The structure of CohII is very similar to Type I cohesins, and the dockerin binding site, which is centred at beta-strands 3, 5 and 6, is likely to be conserved in the two proteins. Subtle differences in the topology of the binding sites and a lack of sequence identity in the beta-strands that comprise the core of the dockerin binding site explain why Type I and Type II cohesins display such distinct specificities for their target dockerins.     

Cellulosome from Clostridium cellulolyticum: molecular study of the Dockerin/Cohesin interaction.

Clostridium cellulolyticum produces cellulolytic complexes (cellulosomes) made of 10-13 cell wall degrading enzymes tightly bound to a scaffolding protein (CipC) by means of their dockerin domain. It has previously been shown that the receptor domains in CipC are the cohesin domains and that the cohesin/dockerin interaction is calcium-dependent. In the present study, surface plasmon resonance was used to demonstrate that the free cohesin1 from CipC and dockerin from CelA have the same K(D) (2.5 x 10(-)(10) M) as that of the entire CelA and a larger fragment of CipC, the latter of which contains, in addition to cohesin1, a cellulose binding domain and a hydrophilic domain of unknown function. This demonstrates that neither the catalytic domain of CelA nor the noncohesin domains of CipC have any influence on the interaction. Dockerin domains are composed of two conserved segments of 22 residues: removal of the second segment abolishes the affinity for cohesin1, whereas modified dockerins having twice the first segment, twice the second, or both segments but in a reverse order have K(D) values for cohesin1 in the same range as that observed for wild-type dockerin. These data indicate that if two segments are required for the complexation with the cohesin, segments 1 and 2 are similar enough to replace each other. Calcium overlay experiments revealed that the dockerin domain has one calcium binding site per conserved segment. Circular dichroism performed on wild-type and mutant dockerins indicates that this domain is well structured and that removal of calcium only weakly affects the secondary structure, which remains 40-45% helical.     

Characterization of a double dockerin from the cellulosome of the anaerobic fungus Piromyces equi

The assembly into supramolecular complexes of proteins having complementary activities is central to cellular function. One such complex of considerable biological and industrial significance is the plant cell wall-degrading apparatus of anaerobic microorganisms, termed the cellulosome. A central feature of bacterial cellulosomes is a large non-catalytic protein, the scaffoldin, which contains multiple cohesin domains. An array of digestive enzymes is incorporated into the cellulosome through the interaction of the dockerin domains, present in the catalytic subunits, with the cohesin domains that are present in the scaffoldin. By contrast, in anaerobic fungi, such as Piromyces equi, the dockerins of cellulosomal enzymes are often present in tandem copies; however, the identity of the cognate cohesin domains in these organisms is unclear, hindering further biotechnological development of the fungal cellulosome. Here, we characterise the solution structure and function of a double-dockerin construct from the P. equi endoglucanase Cel45A. We show that the two domains are connected by a flexible linker that is short enough to keep the binding sites of the two domains on adjacent surfaces, and allows the double-dockerin construct to bind more tightly to cellulosomes than a single domain and with greater coverage. The double dockerin binds to the GH3 beta-glucosidase component of the fungal cellulosome, which is thereby identified as a potential scaffoldin.     

The Synthesis and Biology of Fluorinated Prostacyclins

Abstract

Clostridium thermocellum produces a highly active cellulase system that consists of a high-M_r multienzyme complex termed cellulosome. Hydrolytic components of the cellulosome are organized around a large, noncatalytic glycoprotein termed CipA that acts both as a scaffolding component and a cellulose-binding factor. Catalytic subunits of the cellulosome bear conserved, noncatalytic subdomains, termed dockerin domains, which bind to receptor domains of CipA, termed cohesin domains. CipA includes nine cohesin domains, a cellulose-binding domain, and a specialized dockerin domain. Proteins of the cell envelope carrying cohesin domains that specifically bind the dockerin domain of CipA have been identified. These proteins may mediate anchoring of the cellulosomes to the cell surface. Cellulase complexes similar to the cellulosome of C. thermocellum are produced by several cellulolytic clostridia. High-Mr multienzyme complexes have also been identified in anaerobic rumen fungi. The architecture of the fungal complexes also seems to rely on the interaction of conserved, noncatalytic docking domains with a scaffolding component. However, the sequence of the fungal docking domains bears no resemblance to the clostridial dockerin domains, suggesting that the fungal and clostridial complexes arose independently.     

Combined Crystal Structure of a Type I Cohesin: MUTATION AND AFFINITY BINDING STUDIES REVEAL STRUCTURAL DETERMINANTS OF COHESIN-DOCKERIN SPECIFICITIES*

Cohesin-dockerin interactions orchestrate the assembly of one of nature''s most elaborate multienzyme complexes, the cellulosome. Cellulosomes are produced exclusively by anaerobic microbes and mediate highly efficient hydrolysis of plant structural polysaccharides, such as cellulose and hemicellulose. In the canonical model of cellulosome assembly, type I dockerin modules of the enzymes bind to reiterated type I cohesin modules of a primary scaffoldin. Each type I dockerin contains two highly conserved cohesin-binding sites, which confer quaternary flexibility to the multienzyme complex. The scaffoldin also bears a type II dockerin that anchors the entire complex to the cell surface by binding type II cohesins of anchoring scaffoldins. In Bacteroides cellulosolvens, however, the organization of the cohesin-dockerin types is reversed, whereby type II cohesin-dockerin pairs integrate the enzymes into the primary scaffoldin, and type I modules mediate cellulosome attachment to an anchoring scaffoldin. Here, we report the crystal structure of a type I cohesin from B. cellulosolvens anchoring scaffoldin ScaB to 1.84-Å resolution. The structure resembles other type I cohesins, and the putative dockerin-binding site, centered at β-strands 3, 5, and 6, is likely to be conserved in other B. cellulosolvens type I cohesins. Combined computational modeling, mutagenesis, and affinity-based binding studies revealed similar hydrogen-bonding networks between putative Ser/Asp recognition residues in the dockerin at positions 11/12 and 45/46, suggesting that a dual-binding mode is not exclusive to the integration of enzymes into primary cellulosomes but can also characterize polycellulosome assembly and cell-surface attachment. This general approach may provide valuable structural information of the cohesin-dockerin interface, in lieu of a definitive crystal structure.     

Involvement of Both Dockerin Subdomains in Assembly of the Clostridium thermocellum Cellulosome

Clostridium thermocellum produces an extracellular cellulase complex termed the cellulosome. It consists of a scaffolding protein, CipA, containing nine cohesin domains and a cellulose-binding domain, and at least 14 different enzymatic subunits, each containing a conserved duplicated sequence, or dockerin domain. The cohesin-dockerin interaction is responsible for the assembly of the catalytic subunits into the cellulosome structure. Each duplicated sequence of the dockerin domain contains a region bearing homology to the EF-hand calcium-binding motif. Two subdomains, each containing a putative calcium-binding motif, were constructed from the dockerin domain of CelS, a major cellulosomal catalytic subunit. These subdomains, called DS1 and DS2, were cloned by PCR and expressed in Escherichia coli. The binding of DS1 and DS2 to R3, the third cohesin domain of CipA, was analyzed by nondenaturing gel electrophoresis. A stable complex was formed only when R3 was combined with both DS1 and DS2, indicating that the two halves of the dockerin domain interact with each other and such interaction is required for effective binding of the dockerin domain to the cohesin domain.     

The X-ray structure of a chitinase from the pathogenic fungus Coccidioides immitis

The X-ray structure of chitinase from the fungal pathogen Coccidioides immitis has been solved to 2.2 A resolution. Like other members of the class 18 hydrolase family, this 427 residue protein is an eight-stranded beta/alpha-barrel. Although lacking an N-terminal chitin anchoring domain, the enzyme closely resembles the chitinase from Serratia marcescens. Among the conserved features are three cis peptide bonds, all involving conserved active site residues. The active site is formed from conserved residues such as tryptophans 47, 131, 315, 378, tyrosines 239 and 293, and arginines 52 and 295. Glu171 is the catalytic acid in the hydrolytic mechanism; it was mutated to a Gln, and activity was abolished. Allosamidin is a substrate analog that strongly inhibits the class 18 enzymes. Its binding to the chitinase hevamine has been observed, and we used conserved structural features of the two enzymes to predict the inhibitors binding to the fungal enzyme.     

Solution structure of a type I dockerin domain, a novel prokaryotic, extracellular calcium-binding domain

The type I dockerin domain is responsible for incorporating its associated glycosyl hydrolase into the bacterial cellulosome, a multienzyme cellulolytic complex, via its interaction with a receptor domain (cohesin domain) of the cellulosomal scaffolding subunit. The highly conserved dockerin domain is characterized by two Ca(2+)-binding sites with sequence similarity to the EF-hand motif. Here, we present the three-dimensional solution structure of the 69 residue dockerin domain of Clostridium thermocellum cellobiohydrolase CelS. Torsion angle dynamics calculations utilizing a total of 728 NOE-derived distance constraints and 79 torsion angle restraints yielded an ensemble of 20 structures with an average backbone r.m.s.d. for residues 5 to 29 and 32 to 66 of 0.54 A from the mean structure. The structure consists of two Ca(2+)-binding loop-helix motifs connected by a linker; the E helices entering each loop of the classical EF-hand motif are absent from the dockerin domain. Each dockerin Ca(2+)-binding subdomain is stabilized by a cluster of buried hydrophobic side-chains. Structural comparisons reveal that, in its non-complexed state, the dockerin fold displays a dramatic departure from that of Ca(2+)-bound EF-hand domains. A putative cohesin-binding surface, comprised of conserved hydrophobic and basic residues, is proposed, providing new insight into cellulosome assembly.     

The 1.9 A crystal structure of Escherichia coli MurG, a membrane-associated glycosyltransferase involved in peptidoglycan biosynthesis

The 1.9 A X-ray structure of a membrane-associated glycosyltransferase involved in peptidoglycan biosynthesis is reported. This enzyme, MurG, contains two alpha/beta open sheet domains separated by a deep cleft. Structural analysis suggests that the C-terminal domain contains the UDP-GlcNAc binding site while the N-terminal domain contains the acceptor binding site and likely membrane association site. Combined with sequence data from other MurG homologs, this structure provides insight into the residues that are important in substrate binding and catalysis. We have also noted that a conserved region found in many UDP-sugar transferases maps to a beta/alpha/beta/alpha supersecondary structural motif in the donor binding region of MurG, an observation that may be helpful in glycosyltransferase structure prediction. The identification of a conserved structural motif involved in donor binding in different UDP-sugar transferases also suggests that it may be possible to identify--and perhaps alter--the residues that help determine donor specificity.     

The Clostridium cellulolyticum dockerin displays a dual binding mode for its cohesin partner

The plant cell wall degrading apparatus of anaerobic bacteria includes a large multienzyme complex termed the "cellulosome." The complex assembles through the interaction of enzyme-derived dockerin modules with the multiple cohesin modules of the noncatalytic scaffolding protein. Here we report the crystal structure of the Clostridium cellulolyticum cohesin-dockerin complex in two distinct orientations. The data show that the dockerin displays structural symmetry reflected by the presence of two essentially identical cohesin binding surfaces. In one binding mode, visualized through the A16S/L17T dockerin mutant, the C-terminal helix makes extensive interactions with its cohesin partner. In the other binding mode observed through the A47S/F48T dockerin variant, the dockerin is reoriented by 180 degrees and interacts with the cohesin primarily through the N-terminal helix. Apolar interactions dominate cohesin-dockerin recognition that is centered around a hydrophobic pocket on the surface of the cohesin, formed by Leu-87 and Leu-89, which is occupied, in the two binding modes, by the dockerin residues Phe-19 and Leu-50, respectively. Despite the structural similarity between the C. cellulolyticum and Clostridium thermocellum cohesins and dockerins, there is no cross-specificity between the protein partners from the two organisms. The crystal structure of the C. cellulolyticum complex shows that organism-specific recognition between the protomers is dictated by apolar interactions primarily between only two residues, Leu-17 in the dockerin and the cohesin amino acid Ala-129. The biological significance of the plasticity in dockerin-cohesin recognition, observed here in C. cellulolyticum and reported previously in C. thermocellum, is discussed.     

The X-ray crystal structure of the Trichoderma reesei family 12 endoglucanase 3, Cel12A, at 1.9 A resolution

We present the three-dimensional structure of Trichoderma reesei endoglucanase 3 (Cel12A), a small, 218 amino acid residue (24.5 kDa), neutral pI, glycoside hydrolase family 12 cellulase that lacks a cellulose-binding module. The structure has been determined using X-ray crystallography and refined to 1.9 A resolution. The asymmetric unit consists of six non-crystallographic symmetry-related molecules that were exploited to improve initial multiple isomorphous replacement phasing, and subsequent structure refinement. The enzyme contains one disulfide bridge and is glycosylated at Asp164 by a single N-acetyl glucosamine residue. The protein has the expected fold for a glycoside hydrolase clan-C family 12 enzyme. It contains two beta-sheets, of six and nine strands, packed on top of one another, and one alpha-helix. The concave surface of the nine-stranded beta-sheet forms a large substrate-binding groove in which the active-site residues are located. In the active site, we find a carboxylic acid trio, similar to that of glycoside hydrolase families 7 and 16. The strictly conserved Asp99 hydrogen bonds to the nucleophile, the invariant Glu116. The binding crevice is lined with both aromatic and polar amino acid side-chains which may play a role in substrate binding. The structure of the fungal family 12 enzyme presented here allows a complete structural characterization of the glycoside hydrolase-C clan.     

Crystal structure of penicillin binding protein 4 (dacB) from Escherichia coli, both in the native form and covalently linked to various antibiotics

The crystal structure of penicillin binding protein 4 (PBP4) from Escherichia coli, which has both DD-endopeptidase and DD-carboxypeptidase activity, is presented. PBP4 is one of 12 penicillin binding proteins in E. coli involved in the synthesis and maintenance of the cell wall. The model contains a penicillin binding domain similar to known structures, but includes a large insertion which folds into domains with unique folds. The structures of the protein covalently attached to five different antibiotics presented here show the active site residues are unmoved compared to the apoprotein, but nearby surface loops and helices are displaced in some cases. The altered geometry of conserved active site residues compared with those of other PBPs suggests a possible cause for the slow deacylation rate of PBP4.     

Characterization of a Neocallimastix patriciarum xylanase gene and its product

A xylanase gene (xynC) isolated from the anaerobic ruminal fungus Neocallimastix patriciarum was characterized. The gene consists of an N-terminal catalytic domain that exhibited homology to family 11 of glycosyl hydrolases, a C-terminal cellulose binding domain (CBD) and a putative dockerin domain in between. Each domain was linked by a short linker domain rich in proline and alanine. Deletion analysis demonstrated that the CBD was essential for optimal xylanase activity of the enzyme, while the putative dockerin domain may not be required for enzyme function.     

Investigating the structure of human RNase H1 by site-directed mutagenesis

In this study we examine for the first time the roles of the various domains of human RNase H1 by site-directed mutagenesis. The carboxyl terminus of human RNase H1 is highly conserved with Escherichia coli RNase H1 and contains the amino acid residues of the putative catalytic site and basic substrate-binding domain of the E. coli RNase enzyme. The amino terminus of human RNase H1 contains a structure consistent with a double-strand RNA (dsRNA) binding motif that is separated from the conserved E. coli RNase H1 region by a 62-amino acid sequence. These studies showed that although the conserved amino acid residues of the putative catalytic site and basic substrate-binding domain are required for RNase H activity, deletion of either the catalytic site or the basic substrate-binding domain did not ablate binding to the heteroduplex substrate. Deletion of the region between the dsRNA-binding domain and the conserved E. coli RNase H1 domain resulted in a significant loss in the RNase H activity. Furthermore, the binding affinity of this deletion mutant for the heteroduplex substrate was approximately 2-fold tighter than the wild-type enzyme suggesting that this central 62-amino acid region does not contribute to the binding affinity of the enzyme for the substrate. The dsRNA-binding domain was not required for RNase H activity, as the dsRNA-deletion mutants exhibited catalytic rates approximately 2-fold faster than the rate observed for wild-type enzyme. Comparison of the dissociation constant of human RNase H1 and the dsRNA-deletion mutant for the heteroduplex substrate indicates that the deletion of this region resulted in a 5-fold loss in binding affinity. Finally, comparison of the cleavage patterns exhibited by the mutant proteins with the cleavage pattern for the wild-type enzyme indicates that the dsRNA-binding domain is responsible for the observed strong positional preference for cleavage exhibited by human RNase H1.     

Structure and function of a new phosphopeptide-binding domain containing the FHA2 of Rad53

The forkhead-associated (FHA) domain is a 55-75 amino acid residue module found in >20 proteins from yeast to human. It has been suggested to participate in signal transduction pathways, perhaps via protein-protein interactions involving recognition of phosphopeptides. Neither the structure nor the ligand of FHA is known. Yeast Rad53, a checkpoint protein involved in DNA damage response, contains two FHA domains, FHA1 (residues 66-116) and FHA2 (residues 601-664), the second of which recognizes phosphorylated Rad9. We herein report the solution structure of an "FHA2-containing domain" of Rad53 (residues 573-730). The structure consists of a beta-sandwich containing two antiparallel beta-sheets and a short, C-terminal alpha-helix. Binding experiments suggested that the FHA2-containing domain specifically recognizes pTyr and a pTyr-containing peptide from Rad9, and that the binding site involves residues highly conserved across FHA domains. The results, along with other recent reports, suggest that FHA domains could have pTyr and pSer/Thr dual specificity.     

Crystal structure of prephenate dehydrogenase from Aquifex aeolicus. Insights into the catalytic mechanism

The enzyme prephenate dehydrogenase catalyzes the oxidative decarboxylation of prephenate to 4-hydroxyphenylpyruvate for the biosynthesis of tyrosine. Prephenate dehydrogenases exist as either monofunctional or bifunctional enzymes. The bifunctional enzymes are diverse, since the prephenate dehydrogenase domain is associated with other enzymes, such as chorismate mutase and 3-phosphoskimate 1-carboxyvinyltransferase. We report the first crystal structure of a monofunctional prephenate dehydrogenase enzyme from the hyper-thermophile Aquifex aeolicus in complex with NAD+. This protein consists of two structural domains, a modified nucleotide-binding domain and a novel helical prephenate binding domain. The active site of prephenate dehydrogenase is formed at the domain interface and is shared between the subunits of the dimer. We infer from the structure that access to the active site is regulated via a gated mechanism, which is modulated by an ionic network involving a conserved arginine, Arg250. In addition, the crystal structure reveals for the first time the positions of a number of key catalytic residues and the identity of other active site residues that may participate in the reaction mechanism; these residues include Ser126 and Lys246 and the catalytic histidine, His147. Analysis of the structure further reveals that two secondary structure elements, beta3 and beta7, are missing in the prephenate dehydrogenase domain of the bifunctional chorismate mutase-prephenate dehydrogenase enzymes. This observation suggests that the two functional domains of chorismate mutase-prephenate dehydrogenase are interdependent and explains why these domains cannot be separated.     

The crystal structure of spermidine synthase with a multisubstrate adduct inhibitor.

Polyamines are essential in all branches of life. Spermidine synthase (putrescine aminopropyltransferase, PAPT) catalyzes the biosynthesis of spermidine, a ubiquitous polyamine. The crystal structure of the PAPT from Thermotoga maritima (TmPAPT) has been solved to 1.5 A resolution in the presence and absence of AdoDATO (S-adenosyl-1,8-diamino-3-thiooctane), a compound containing both substrate and product moieties. This, the first structure of an aminopropyltransferase, reveals deep cavities for binding substrate and cofactor, and a loop that envelops the active site. The AdoDATO binding site is lined with residues conserved in PAPT enzymes from bacteria to humans, suggesting a universal catalytic mechanism. Other conserved residues act sterically to provide a structural basis for polyamine specificity. The enzyme is tetrameric; each monomer consists of a C-terminal domain with a Rossmann-like fold and an N-terminal beta-stranded domain. The tetramer is assembled using a novel barrel-type oligomerization motif.     

Monomeric S-adenosylmethionine decarboxylase from plants provides an alternative to putrescine stimulation

S-Adenosylmethionine decarboxylase has been implicated in cell growth and differentiation and is synthesized as a proenzyme, which undergoes autocatalytic cleavage to generate an active site pyruvoyl group. In mammals, S-adenosylmethionine decarboxylase is active as a dimer in which each protomer contains one alpha subunit and one beta subunit. In many higher organisms, autocatalysis and decarboxylation are stimulated by putrescine, which binds in a buried site containing numerous negatively charged residues. In contrast, plant S-adenosylmethionine decarboxylases are fully active in the absence of putrescine, with rapid autocatalysis that is not stimulated by putrescine. We have determined the structure of the S-adenosylmethionine decarboxylase from potato, Solanum tuberosum, to 2.3 A resolution. Unlike the previously determined human enzyme structure, the potato enzyme is a monomer in the crystal structure. Ultracentrifugation studies show that the potato enzyme is also a monomer under physiological conditions, with a weak self-association constant of 6.5 x 10(4) M(-)(1) for the monomer-dimer association. Although the potato enzyme contains most of the buried charged residues that make up the putrescine binding site in the human enzyme, there is no evidence for a putrescine binding site in the potato enzyme. Instead, several amino acid substitutions, including Leu13/Arg18, Phe111/Arg114, Asp174/Val181, and Phe285/His294 (human/potato), provide side chains that mimic the role of putrescine in the human enzyme. In the potato enzyme, the positively charged residues form an extensive network of hydrogen bonds bridging a cluster of highly conserved negatively charged residues and the active site, including interactions with the catalytic residues Glu16 and His249. The results explain the constitutively high activity of plant S-adenosylmethionine decarboxylases in the absence of putrescine and are consistent with previously proposed models for how putrescine together with the buried, negatively charged site regulates enzyme activity.     

The 2.3-A crystal structure of the shikimate 5-dehydrogenase orthologue YdiB from Escherichia coli suggests a novel catalytic environment for an NAD-dependent dehydrogenase

We present here the 2.3-A crystal structure of the Escherichia coli YdiB protein, an orthologue of shikimate 5-dehydrogenase. This enzyme catalyzes the reduction of 3-dehydroshikimate to shikimate as part of the shikimate pathway, which is absent in mammals but required for the de novo synthesis of aromatic amino acids, quinones, and folate in many other organisms. In this context, the shikimate pathway has been promoted as a target for the development of antimicrobial agents. The crystal structure of YdiB shows that the protomer contains two alpha/beta domains connected by two alpha-helices, with the N-terminal domain being novel and the C-terminal domain being a Rossmann fold. The NAD+ cofactor, which co-purified with the enzyme, is bound to the Rossmann domain in an elongated fashion with the nicotinamide ring in the pro-R conformation. Its binding site contains several unusual features, including a cysteine residue in close apposition to the nicotinamide ring and a clamp over the ribose of the adenosine moiety formed by phenylalanine and lysine residues. The structure explains the specificity for NAD versus NADP in different members of the shikimate dehydrogenase family on the basis of variations in the amino acid identity of several other residues in the vicinity of this ribose group. A cavity lined by residues that are 100% conserved among all shikimate dehydrogenases is found between the two domains of YdiB, in close proximity to the hydride acceptor site on the nicotinamide ring. Shikimate was modeled into this site in a geometry such that all of its heteroatoms form high quality hydrogen bonds with these invariant residues. Their strong conservation in all orthologues supports the possibility of developing broad spectrum inhibitors of this enzyme. The nature and disposition of the active site residues suggest a novel reaction mechanism in which an aspartate acts as the general acid/base catalyst during the hydride transfer reaction.