Epistatic interaction is an important genetic basis of grain yield and its components in maize

A population of 294 recombinant inbred lines (RIL) derived from Yuyu22, an elite maize hybrid extending broadly in China, has been constructed to investigate the genetic basis of grain yield, and associated yield components in maize. The main-effect quantitative trait loci (QTL), digenic epistatic interactions, and their interactions with the environment for grain yield and its three components were identified by using the mixed linear model approach. Thirty-two main-effect QTL and forty-four pairs of digenic epistatic interactions were detected for the four measured traits in four environments. Our results suggest that both additive effects and epistasis (additive × additive) effects are important genetic bases of grain yield and its components in the RIL population. Only 30.4% of main-effect QTL for ear length were involved in epistatic interactions. This implies that many loci in epistatic interactions may not have significant effects for traits alone but may affect trait expression by epistatic interaction with the other loci.     

Whole-Genome Quantitative Trait Locus Mapping Reveals Major Role of Epistasis on Yield of Rice

Although rice yield has been doubled in most parts of the world since 1960s, thanks to the advancements in breeding technologies, the biological mechanisms controlling yield are largely unknown. To understand the genetic basis of rice yield, a number of quantitative trait locus (QTL) mapping studies have been carried out, but whole-genome QTL mapping incorporating all interaction effects is still lacking. In this paper, we exploited whole-genome markers of an immortalized F₂ population derived from an elite rice hybrid to perform QTL mapping for rice yield characterized by yield per plant and three yield component traits. Our QTL model includes additive and dominance main effects of 1,619 markers and all pair-wise interactions, with a total of more than 5 million possible effects. The QTL mapping identified 54, 5, 28 and 4 significant effects involving 103, 9, 52 and 7 QTLs for the four traits, namely the number of panicles per plant, the number of grains per panicle, grain weight, and yield per plant. Most identified QTLs are involved in digenic interactions. An extensive literature survey of experimentally characterized genes related to crop yield shows that 19 of 54 effects, 4 of 5 effects, 12 of 28 effects and 2 of 4 effects for the four traits, respectively, involve at least one QTL that locates within 2 cM distance to at least one yield-related gene. This study not only reveals the major role of epistasis influencing rice yield, but also provides a set of candidate genetic loci for further experimental investigation.     

Genetics of quantitative traits in Arabidopsis thaliana

The genetic control of 22 quantitative traits, including developmental rates and sizes, was examined in generations of Arabidopsis thaliana derived from the cross between the ecotypes, Columbia (Col) and Landsberg erecta (Ler). The data were obtained from three sets of families raised in the same trial: the 16 basic generations, that is, parents, F(1)'s, F(2)'s, backcrosses, recombinant inbred lines (RILs) and a triple test cross (TTC), the latter produced by crossing the RILs to Col, Ler and their F(1). The data were analysed by two approaches. The first (approach A) involved traditional generation mean and variance component analysis and the second (B), based around the RILs and TTC families, involved marker-based QTL analysis.From (A), genetic differences between Col and Ler were detected for all traits with moderate heritabilities. Height at flowering was the only trait to show heterosis. Dominance was partial to complete for all height traits, and there was no overdominance but there was strong evidence for directional dominance. For most other traits, dominance was ambidirectional and incomplete, with average dominance ratios of around 80%. Epistasis, particularly of the duplicate type that opposes dominance, was a common feature of all traits. The presence of epistasis must imply multiple QTL for all traits.The QTL analysis located 38 significant effects in four regions of chromosomes I, II, IV and V, but not III. QTL affecting rosette size and leaf number were identified in all four regions, with days to maturity on chromosomes IV and V. The only QTL for height was located at the expected position of the erecta gene (chromosome II; 50 cM), but the additive and dominance effects of this single QTL did not adequately explain the generation means. The possible involvement of other interacting height QTL is discussed.     

大豆小区产量及其相关性状QTL间的上位性和环境互作效应

以晋豆23栽培大豆(Glycine max)为母本、灰布支黑豆(ZDD2315,半野生大豆)为父本衍生出447个RIL群体,通过构建SSR遗传图谱及利用混合线性模型分析方法,对2年大豆小区产量及主要植物学性状进行QTL定位,并作加性效应、加性×加性上位互作效应及环境互作效应分析。结果显示,共检测到12个与小区产量、单株粒重、单株茎重、单株粒茎比、有效分枝、主茎节数、株高和结荚高度相关的QTL,分别位于A1、A2、H_1、I、J_2和M连锁群上。其中小区产量、株高、单株粒重、有效分枝和主茎节数均表现为遗传正效应,即增加其性状的等位基因来源于母本晋豆23。同时,检测到11对影响小区产量、单株粒重、单株茎重、株高和结荚高度的加性×加性上位互作效应及环境互作效应的QTL,发现22个QTL与环境存在互作。实验结果表明,上位效应和QE互作效应对大豆小区产量及主要农艺性状的遗传影响很大。进行大豆分子标记辅助育种时,既要考虑效应起主要作用的QTL,又要注重上位性QTL,这样有利于性状的稳定表达和遗传。     

Classical genetic and quantitative trait loci analyses of heterosis in a maize hybrid between two elite inbred lines

The exploitation of heterosis is one of the most outstanding advancements in plant breeding, although its genetic basis is not well understood yet. This research was conducted on the materials arising from the maize single cross B73 x H99 to study heterosis by procedures of classical genetic and quantitative trait loci (QTL) analyses. Materials were the basic generations, the derived 142 recombinant inbred lines (RILs), and the three testcross populations obtained by crossing the 142 RILs to each parent and their F(1). For seedling weight (SW), number of kernels per plant (NK), and grain yield (GY), heterosis was >100% and the average degree of dominance was >1. Epistasis was significant for SW and NK but not for GY. Several QTL were identified and in most cases they were in the additive-dominance range for traits with low heterosis and mostly in the dominance-overdominance range for plant height (PH), SW, NK, and GY. Only a few QTL with digenic epistasis were identified. The importance of dominance effects was confirmed by highly significant correlations between heterozygosity level and phenotypic performance, especially for GY. Some chromosome regions presented overlaps of overdominant QTL for SW, PH, NK, and GY, suggesting pleiotropic effects on overall plant vigor.     

Molecular mapping in tropical maize (Zea mays L.) using microsatellite markers. 2. Quantitative trait loci (QTL) for grain yield, plant height, ear height and grain moisture

A previous genetic map containing 117 microsatellite loci and 400 F(2) plants was used for quantitative trait loci (QTL) mapping in tropical maize. QTL were characterized in a population of 400 F(2:3) lines, derived from selfing the F(2) plants, and were evaluated with two replications in five environments. QTL determinations were made from the mean of these five environments. Grain yield (GY), plant height (PH), ear height (EH) and grain moisture (GM) were measured. Variance components for genotypes (G), environments (E) and GxE interaction were highly significant for all traits. Heritability was 0.69 for GY, 0.66 for PH, 0.67 for EH and 0.23 for GM. Using composite interval mapping (CIM), a total of 13 distinct QTLs were identified: four for GY, four for PH and five for EH. No QTL was detected for GM. The QTL explained 32.73 % of the phenotypic variance of GY, 24.76 % of PH and 20.91 % of EH. The 13 QTLs displayed mostly partial dominance or overdominance gene action and mapped to chromosomes 1, 2, 7, 8 and 9. Most QTL alleles conferring high values for the traits came from line L-14-4B. Mapping analysis identified genomic regions associated with two or more traits in a manner that was consistent with correlation among traits, supporting either pleiotropy or tight linkage among QTL. The low number of QTLs found, can be due to the great variation that exists among tropical environments.     

云南香型软米水稻资源农艺性状遗传效应研究

选取5份云南地方香型软米水稻种质资源和6份自育香型软米保持系按5×6不完全双列杂交设计(NCⅡ)配制成30个组合,采用加性-显性-上位性遗传模型,分析云南香型软米11个农艺性状的遗传效应。结果表明,云南香型软米多数农艺性状的遗传主要受加×加上位性效应、加性×环境效应、显性×环境效应的影响,还存在不同程度的加性效应和显性效应,单株产量受基因加性效应、显性效应、加×加上位性效应、加性×环境效应、显性×环境效应的影响;株高、有效穗的遗传率以普通狭义遗传率为主,其他性状的普通狭义遗传率和互作狭义遗传率均达极显著水平;产量构成性状之间存在不同类型和不同程度的遗传相关,多数性状之间以加×加上位性、加性×环境和显性×环境互作效应显著。     

QTL mapping for maize resistance and yield under infestation with Sesamia nonagrioides

The Mediterranean corn borer (MCB) is the most important maize insect pest in the Mediterranean region. The main objective was to map quantitative trait loci (QTL) for yield performance under infestation with MCB, resistance and agronomic traits in a maize RIL population derived from an inbred cross European flint × Reid. Six QTL for resistance traits were located: one QTL for tunnel length (bin 9.03; p = 19.8 %), one QTL for stalk lodging (bin 3.07, p = 11.5 %), and four QTL for ear resistance (bins 1.07, 5.03/5.05, and 8.04; p = 25–63 %). Twelve QTL for agronomic traits were located: a QTL for yield under infestation (bin 5.03, p = 15 %); two QTL for grain moisture (bins 1.07 and 8.05); two QTL for days to anthesis (bin 1.07 and 8.05); two QTL for days to silking (bins 8.04 and 10.02); three QTL for plant height (bins 5.04, 8.05 and 9.03); and two QTL for ear height (bins 8.05 and 9.03). No genetic correlations between yield and other traits were observed. The cross validation (CV) approach showed that the estimation biases for QTL for resistance traits were higher than those for agronomic traits. This work stresses the importance of the region 9.03 for controlling corn borer resistance and suggests the presence of QTL with small effect on ear-resistance traits. At the same genomic region, there are also genes that control plant and ear height and future works could elucidate whether these genes are the same or are closely linked. The QTL for yield seem to play an important role in MCB tolerance in this genetic background. Large biases observed for QTL effects by CV were mainly due to the small sample size used and were higher for resistance traits due to their larger genetic complexity. We consider that it is more appropriate to select for grain yield under infestation instead of selecting for resistance traits because resistance to MCB could have unfavorable associations with agronomic traits.     

Epistasis for Three Grain Yield Components in Rice (Oryza Sativa L.)

The genetic basis for three grain yield components of rice, 1000 kernel weight (KW), grain number per panicle (GN), and grain weight per panicle (GWP), was investigated using restriction fragment length polymorphism markers and F(4) progeny testing from a cross between rice subspecies japonica (cultivar Lemont from USA) and indica (cv. Tequing from China). Following identification of 19 QTL affecting these traits, we investigated the role of epistasis in genetic control of these phenotypes. Among 63 markers distributed throughout the genome that appeared to be involved in 79 highly significant (P < 0.001) interactions, most (46 or 73%) did not appear to have ``main'''' effects on the relevant traits, but influenced the trait(s) predominantly through interactions. These results indicate that epistasis is an important genetic basis for complex traits such as yield components, especially traits of low heritability such as GN and GWP. The identification of epistatic loci is an important step toward resolution of discrepancies between quantitative trait loci mapping and classical genetic dogma, contributes to better understanding of the persistence of quantitative genetic variation in populations, and impels reconsideration of optimal mapping methodology and marker-assisted breeding strategies for improvement of complex traits.     

Gene actions at loci underlying several quantitative traits in two elite rice hybrids

To understand the gene activities controlling nine important agronomic quantitative traits in rice, we applied a North Carolina design 3 (NC III design) analysis to recombinant inbred lines (RILs) in highly heterotic inter- (IJ) and intra-subspecific (II) hybrids by performing the following tasks: (1) investigating the relative contribution of additive, dominant, and epistatic effects for performance traits by generation means analysis and variance component estimates; (2) detecting the number, genomic positions, and genetic effects of QTL for phenotypic traits; and (3) characterizing their mode of gene action. Under an F∞-metric, generation means analysis and variance components estimates revealed that epistatic effects prevailed for the majority of traits in the two hybrids. QTL analysis identified 48 and 66 main-effect QTL (M-QTL) for nine traits in IJ and II hybrids, respectively. In IJ hybrids, 20 QTL (41.7%) showed an additive effect of gene actions, 20 (41.7%) showed partial-to-complete dominance, and 8 (16.7%) showed overdominance. In II hybrids, 34 QTL (51.5%) exhibited additive effects, 14 (21.2%) partial-to-complete dominance, and 18 (27.3%) overdominance. There were 153 digenic interactions (E-QTL) in the IJ hybrid and 252 in the II hybrid. These results suggest that additive effects, dominance, overdominance, and particularly epistasis attribute to the genetic basis of the expression of traits in the two hybrids. Additionally, we determined that the genetic causes of phenotypic traits and their heterosis are different. In the plants we studied, the phenotypic traits investigated and their heterosis were conditioned by different M-QTL and E-QTL, respectively, and were mainly due to non-allelic interactions (epistasis).     

QTL analysis of shading sensitive related traits in maize under two shading treatments

During maize development and reproduction, shading stress is an important abiotic factor influencing grain yield. To elucidate the genetic basis of shading stress in maize, an F(2:3) population derived from two inbred lines, Zhong72 and 502, was used to evaluate the performance of six traits under shading treatment and full-light treatment at two locations. The results showed that shading treatment significantly decreased plant height and ear height, reduced stem diameter, delayed day-to-tassel (DTT) and day-to-silk (DTS), and increased anthesis-silking interval (ASI). Forty-three different QTLs were identified for the six measured traits under shading and full light treatment at two locations, including seven QTL for plant height, nine QTL for ear height, six QTL for stem diameter, seven QTL for day-to-tassel, six QTL for day-to-silk, and eight QTL for ASI. Interestingly, three QTLs, qPH4, qEH4a, and qDTT1b were detected under full sunlight and shading treatment at two locations simultaneously, these QTL could be used for selecting elite hybrids with high tolerance to shading and high plant density. And the two QTL, qPH10 and qDTS1a, were only detected under shading treatment at two locations, should be quit for selecting insensitive inbred line in maize breeding procedure by using MAS method.     

Identification of QTL for growth- and grain yield-related traits in rice across nine locations of Asia

Rice double-haploid (DH) lines of an indica and japonica cross were grown at nine different locations across four countries in Asia. Genotype-by-environment (G x E) interaction analysis for 11 growth- and grain yield-related traits in nine locations was estimated by AMMI analysis. Maximum G x E interaction was exhibited for fertility percentage number of spikelets and grain yield. Plant height was least affected by environment, and the AMMI model explained a total of 76.2% of the interaction effect. Mean environment was computed by averaging the nine environments and subsequently analyzed with other environments to map quantitative trait loci (QTL). QTL controlling the 11 traits were detected by interval analysis using mapmaker/qtl. A threshold LOD of >/=3.20 was used to identify significant QTL. A total of 126 QTL were identified for the 11 traits across nine locations. Thirty-four QTL common in more than one environment were identified on ten chromosomes. A maximum of 44 QTL were detected for panicle length, and the maximum number of common QTL were detected for days to heading detected. A single locus for plant height (RZ730-RG810) had QTL common in all ten environments, confirming AMMI results that QTL for plant height were affected the least by environment, indicating the stability of the trait. Two QTL were detected for grain yield and 19 for thousand-grain weight in all DH lines. The number of QTL per trait per location ranged from zero to four. Clustering of the QTL for different traits at the same marker intervals was observed for plant height, panicle number, panicle length and spikelet number suggesting that pleiotropism and or tight linkage of different traits could be the possible reason for the congruence of several QTL. The many QTL detected by the same marker interval across environments indicate that QTL for most traits are stable and not essentially affected by environmental factors.     

Identification of quantitative trait loci for nitrogen use efficiency in maize

Intensively managed crop systems are normally dependent on nitrogen input to maximize yield potential. Improvements in nitrogen- use efficiency (NUE) in crop plants may support the development of cropping systems that are more economically efficient and environment friendly. The objective of this study was to map and characterize quantitative trait loci (QTL) for NUE in a maize population. In preliminary experiments, inbred lines contrasting for NUE were identified and were used to generate populations of F2:3 families for genetic study. A total of 214 F2:3 families were evaluated in replicated trials under high nitrogen (280 kg/ha) and low nitrogen (30 kg/ha) conditions in 1996 and 1997. Analysis of ear-leaf area, plant height, grain yield, ears per plant, kernels number per ear, and kernel weight indicated significant genetic variation among F2:3 families. The heritability of these traits was found to be high (h2=0.57–0.81). The mapping population were genotyped using a set of 99 restriction fragment length polymorphism (RFLP) markers. A linkage map of these markers was developed and used to identify QTL. Between two and six loci were found to be associated with each trait. The correspondence of several genomic regions with traits measured under nitrogen limited conditions suggests the presence of QTL associated with NUE. QTLs will help breeders to improve their maize ideotype of a low-nitrogen efficiency by identifying those constitutive and adaptive traits involved in the expression of traits significantly correlated with yield, such as ear leaf area and number of ears per plant. This revised version was published online in June 2006 with corrections to the Cover Date.     

Epistasis in maize (Zea mays L.)

Summary Three flint and three dent maize (Zea mays L.) inbred lines, their possible F₁ crosses, F₂ and backcross progenies, and all possible three-way crosses were evaluated in a three-year experiment for yield, ear moisture, and plant height. The purpose was to estimate genetic parameters in European breeding materials from (i) generation means analysis, (ii) diallel analysis of generation means, and (iii) analysis of F₁ and three-way cross hybrids. Method (i) was based on the F-metric model and methods (ii) and (iii) on the Eberhart-Gardner (1966) genetic model; both models extended for heterotic maternal effects.Differences among generation means for yield and plant height were mainly attributable to dominance effects. Epistatic effects were significantly different from zero in a few crosses and considerably reduced heterosis in both traits. Additive x additive and domiance x dominance effects for yield were consistently positive and negative, respectively. Significant maternal effects were established to the advantage of generations with a heterozygous seed parent. In the diallel analysis, mean squares for dominance effects were greater than for additive effects for yield and plant height but smaller for ear moisture. Though significant for yield and plant height, epistatic variation was small compared to additive and dominance variation. Estimates of additive x additive epistasis for yield were significantly negative in 11 of 15 crosses, suggesting that advantageous gene combinations in the lines had been disrupted by recombination in the segregating generations. The analysis of hybrids supported the above findings regarding the analysis of variance. However, the estimates of additive x additive epistasis for yield were considerably smaller and only minimally correlated with those from the diallel analysis. Use of noninbred materials as opposed to materials with different levels of inbreeding is considered the main reason for the discrepancies in the results.     

Mapping QTL for Grain Yield and Plant Traits in a Tropical Maize Population

The vast majority of reported QTL mapping for maize (Zea mays L.) traits are from temperate germplasm and, also, QTL by environment interaction (QTL × E) has not been thoroughly evaluated and analyzed in most of these papers. The maize growing areas in tropical regions are more prone to environmental variability than in temperate areas, and, therefore, genotype by environment interaction is of great concern for maize breeders. The objectives of this study were to map QTL and to test their interaction with environments for several traits in a tropical maize population. Two-hundred and fifty-six F_2:3 families evaluated in five environments, a genetic map with 139 microsatellites markers, and the multiple-environment joint analysis (mCIM) were used to map QTL and to test QTL × E interaction. Sixteen, eight, six, six, nine, and two QTL were mapped for grain yield, ears per plant, plant lodging, plant height, ear height, and number of leaves, respectively. Most of these QTL interacted significantly with environments, most of them displayed overdominance for all traits, and genetic correlated traits had a low number of QTL mapped in the same genomic regions. Few of the QTL mapped had already been reported in both temperate and tropical germplasm. The low number of stable QTL across environments imposes additional challenges to design marker-assisted selection in tropical areas, unless the breeding programs could be directed towards specific target areas.     

The genetic basis of heterosis: multiparental quantitative trait loci mapping reveals contrasted levels of apparent overdominance among traits of agronomical interest in maize (Zea mays L.)

Understanding the genetic bases underlying heterosis is a major issue in maize (Zea mays L.). We extended the North Carolina design III (NCIII) by using three populations of recombinant inbred lines derived from three parental lines belonging to different heterotic pools, crossed with each parental line to obtain nine families of hybrids. A total of 1253 hybrids were evaluated for grain moisture, silking date, plant height, and grain yield. Quantitative trait loci (QTL) mapping was carried out on the six families obtained from crosses to parental lines following the "classical" NCIII method and with a multiparental connected model on the global design, adding the three families obtained from crosses to the nonparental line. Results of the QTL detection highlighted that most of the QTL detected for grain yield displayed apparent overdominance effects and limited differences between heterozygous genotypes, whereas for grain moisture predominance of additive effects was observed. For plant height and silking date results were intermediate. Except for grain yield, most of the QTL identified showed significant additive-by-additive epistatic interactions. High correlation observed between heterosis and the heterozygosity of hybrids at markers confirms the complex genetic basis and the role of dominance in heterosis. An important proportion of QTL detected were located close to the centromeres. We hypothesized that the lower recombination in these regions favors the detection of (i) linked QTL in repulsion phase, leading to apparent overdominance for heterotic traits and (ii) linked QTL in coupling phase, reinforcing apparent additive effects of linked QTL for the other traits.     

Mapping quantitative trait loci underlying triploid endosperm traits

Endosperm, which is derived from two polar nuclei fusing with one sperm, is a triploid tissue in cereals. Endosperm tissue determines the grain quality of cereals. Improving grain quality is one of the important breeding objectives in cereals. However, current statistical methods for mapping quantitative trait loci (QTL) under diploid genetic control have not been effective for dealing with endosperm traits because of the complexity of their triploid inheritance. In this paper, we derive for the first time the conditional probabilities of F(3) endosperm QTL genotypes given different flanking marker genotypes in F(2) plants. Using these probabilities, we develop a multiple linear regression method implemented via the iteratively reweighted least-squares (IRWLS) algorithm and a maximum likelihood method (ML) implemented via the expectation-maximization (EM) algorithm to map QTL underlying endosperm traits. We use the mean value of endosperm traits of F(3) seeds as the dependent variable and the expectations of genotypic indicators for additive and dominance effect of a putative QTL flanked by a pair of markers as independent variables for IRWLS mapping. However, if an endosperm trait is measured quantitatively using a single endosperm sample, the ML mapping method can be used to separate the two dominance effects. Efficiency of the methods is verified through extensive Monte Carlo simulation studies. Results of simulation show that the proposed methods provide accurate estimates of both the QTL effects and locations with very high statistical power. With these methods, we are now ready to map endosperm traits, as we can for regular quantitative trait under diploid control.     

Detection of epistatic interactions between exotic alleles introgressed from wild barley (H. vulgare ssp. spontaneum)

The expression of a quantitative phenotype can be controlled through genotype, environment and genotype by environment interaction effects. Further, genotype effects can be attributed to major genes, quantitative trait loci (QTL) and gene by gene interactions, which are also termed epistatic interactions. The present study demonstrates that two-way epistatic interactions can play an important role for the expression of domestication-related traits like heading date, plant height and yield. In the BC₂DH population S42, carrying wild barley introgressions in the genetic background of the spring barley cultivar Scarlett, 13, 8 and 12 marker by marker interaction effects could be detected for the traits heading date, plant height and yield, respectively. Significant allelic combinations at interacting loci coincided for heading date, plant height and yield suggesting the presence of pleiotropic effects rather than several linked QTL. The mode of epistasis observed was primarily characterised by either (1) compensatory effects, where allelic combinations from the same genotype buffered the phenotype, or (2) augmented effects, where only the combination of the exotic allele at both interacting loci caused an altered phenotype. The present study shows that estimates of main effects of QTL can be confounded by interactions with background loci, suggesting that the identification of epistatic effects is important for gene cloning and marker-assisted selection. Furthermore, interaction effects between loci and putative candidate genes detected in the present study reveal potential functional relationships, which can be used to further elucidate gene networks in barley.     

Capturing pair-wise epistatic effects associated with three agronomic traits in barley

Genetic association mapping has been widely applied to determine genetic markers favorably associated with a trait of interest and provide information for marker-assisted selection. Many association mapping studies commonly focus on main effects due to intolerable computing intensity. This study aims to select several sets of DNA markers with potential epistasis to maximize genetic variations of some key agronomic traits in barley. By doing so, we integrated a MDR (multifactor dimensionality reduction) method with a forward variable selection approach. This integrated approach was used to determine single nucleotide polymorphism pairs with epistasis effects associated with three agronomic traits: heading date, plant height, and grain yield in barley from the barley Coordinated Agricultural Project. Our results showed that four, seven, and five SNP pairs accounted for 51.06, 45.66 and 40.42% for heading date, plant height, and grain yield, respectively with epistasis being considered, while corresponding contributions to these three traits were 45.32, 31.39, 31.31%, respectively without epistasis being included. The results suggested that epistasis model was more effective than non-epistasis model in this study and can be more preferred for other applications.     

QTL mapping analysis of plant height and ear height of maize (Zea mays L.)

Genetic map containing 103 microsatellite loci obtained on 200 F2 plants derived from the cross R15 x 478 was used for quantitative trait loci (QTL) mapping in maize. QTL were characterized in a population of 200 F2:4 lines, derived from selfing the F2 plants, and were evaluated with two replications in two environments. QTL determinations were made from the mean of these two environments. Plant height (PH) and ear height (EH) were measured. Using composite interval mapping (CIM) method, a total of 14 distinct QTLs were identified: nine for PH and five for EH. Additive, partial dominance, dominance, and overdominance actions existed among all detected QTL affecting plant height and ear height. The QTL explained 78.27% of the phenotypic variance of PH and 41.50% of EH. The 14 QTLs displayed mostly dominance or partial dominance gene action and mapped to chromosomes 2, 3, 4, 8 and 9.