Development of a method for sample preparation for subsequent identification and measurement of 1,2,3,4-tetrahydroisoquinolines and other potentially neurotoxic compounds by high-performance liquid chromatography with ultraviolet and fluorescence detection in blood plasma of Parkinson’s disease patients

We developed sample preparation methods for the detection of various biogenic phenylethylamine derivatives such as 3,4-dihydroxyphenylalanine, and their cyclisation products with aldehydes, i.e., 1,2,3,4-tetrahydroisoquinoline derivatives in blood samples. 1,2,3,4-Tetrahydroisoquinolines are considered to play an essential role as neurotoxic compounds in the pathomechanism of Parkinson’s disease. We used reversed-phase high-performance liquid chromatography with ultraviolet and fluorescence detection for separation and identification. Ultrafiltration, protein precipitation and solid-phase extraction were investigated for purification of blood samples and enrichment of various compounds with a wide range of hydrophilicity and hydrophobicity. Protein precipitation by methanol and perchloric acid is a fast method to separate the analytes from the plasma matrix. A higher yield of the analytes is attained with prior addition of an alkylsulfonic acid giving a fine-grained precipitate. With the addition of ion pairing compounds into the sample it is possible to enrich not only lipophilic compounds such as norharman, tryptamine and melatonin, but also hydrophilic ones such as 3,4-dihydroxyphenylalanine by reversed-phase solid-phase extraction. Ultrafiltration is not useful as a screening method.     

Enhanced Human Tissue Microdialysis Using Hydroxypropyl-?-Cyclodextrin as Molecular Carrier

Microdialysis sampling of lipophilic molecules in human tissues is challenging because protein binding and adhesion to the membrane limit recovery. Hydroxypropyl-ß-cyclodextrin (HP-ß-CD) forms complexes with hydrophobic molecules thereby improving microdialysis recovery of lipophilic molecules in vitro and in rodents. We tested the approach in human subjects. First, we determined HP-ß-CD influences on metabolite stability, delivery, and recovery in vitro. Then, we evaluated HP-ß-CD as microdialysis perfusion fluid supplement in 20 healthy volunteers. We placed 20 kDa microdialysis catheters in subcutaneous abdominal adipose tissue and in the vastus lateralis muscle. We perfused catheters with lactate free Ringer solution with or without 10% HP-ß-CD at flow rates of 0.3–2.0 µl/min. We assessed tissue metabolites, ultrafiltration effects, and blood flow. In both tissues, metabolite concentrations with Ringer+HP-ß-CD perfusate were equal or higher compared to Ringer alone. Addition of HP-ß-CD increased dialysate volume by 10%. Adverse local or systemic reactions to HP-ß-CD did not occur and analytical methods were not disturbed. HP-ß-CD addition allowed to measure interstitial anandamide concentrations, a highly lipophilic endogenous molecule. Our findings suggest that HP-ß-CD is a suitable supplement in clinical microdialysis to enhance recovery of lipophilic molecules from human interstitial fluid.     

Analytical methods applied to the determination of heterocyclic aromatic amines in foods

Analytical aspects concerning the heterocyclic aromatic amines (HAAs) determination in foods are reviewed. Sample pre-treatment procedures such as liquid-liquid extraction (LLE), supercritical fluid extraction, solid-phase extraction (SPE), solid-phase microextraction (SPME), and the mainly used LLE-SPE tandem extraction are discussed. The analytical methods used for the identification and quantification are HPLC, HPLC combined with single or tandem MS detection (HPLC-MS, HPLC-MS/MS), GC-MS and capillary electrophoresis. Advantages and figures of merit for each technique are discussed.     

Extraction of squalene from yeast by supercritical carbon dioxide

Squalene produced under anaerobic conditions, by a strain of Torulaspora delbrueckii was extracted from the biomass using supercritical carbon dioxide. Minimum use of solvent, lower time of isolation and a higher selectivity of extraction merit use of supercritical fluid extraction (SFE) technique over solvent extraction of squalene, as optimized and reported previously. A maximum squalene yield of 11.12 g g^–1 (dry weight) of yeast cells was obtained at a temperature of 60 °C and pressure of 250–255 bar at a constant flow rate of 0.2l min^–1 of carbon dioxide. Lyophilization prior to SFE increased the squalene yield to 430.52 g g^–1 dry weight of yeast cells, an amount that is far greater than that obtained by (2:1) chloroform–methanol solvent extraction.     

Dependence of lipid chain and head group packing of the inverted hexagonal phase on hydration

A model which positions the hydrophobic/hydrophilic boundary in phosphatidylethanolamine lipids at the first CH₂ group in the acyl or alkyl chain is used to calculate the surface area per lipid, the mean chain and head-group dimensions and diameters of the hydrophilic tubes of the inverted hexagonal phase of didodecylphosphatidylethanolamine. The calculated surface areas compare favorably with areas obtained for the lamellar liquid crystal phase of the same lipid using the same boundary. Placement of the boundary within the lipid structure permits a determination of the maximum headgroup packing at hydration levels down to complete dehydration. The headgroup dimensions are consistent with a 5 Å diam void at the center of a hydrophilic tube at zero hydration. The calculated mean fluid chain length is ~2 Å smaller than the mean chain length of the lamellar phase at comparable levels of hydration. Comparison of the calculated mean fluid chain length and distances between hydrophobic boundaries shows that the fluid chains are interdigitated between adjacent tubes, and not interdigitated in the central space between three tubes. At low hydration the chains interdigitate in both spaces. The number of lipids packed around a tube at low hydration is only a function of the headgroup geometry, whereas at high hydration, it is a function of the number of carbon atoms in the chains.     

96-Well solid-phase extraction: a brief history of its development

This communication describes the invention and further development of the first 96-well solid-phase extraction system and the original purposes to which it was put. We also describe the adaption of this system for bioanalysis of pharmaceutically active small molecules and the needs underlying it. The system has become a world-wide standard for high-throughput bioanalysis and has been extended by others to include, for example, disk-phase extraction and supported liquid-liquid extraction, as well as 384-well systems. The factors that enabled this leap forward in productivity are discussed.     

Proteomics analysis of prefractionated human lumbar cerebrospinal fluid

Cerebrospinal fluid (CSF) is produced by the chorioid plexus in the ventricles. It surrounds the brain and bone marrow, and reflects several different disorders of the central nervous system (CNS). Proteomics has been used to analyze CSF in order to discover disease-associated proteins and to elucidate the basic molecular mechanisms that either cause, or result from, CNS disorders. However, some disease-associated proteins are of low-abundance and are difficult to detect. A low total-protein concentration, a high amount of albumin and immunoglobins, and a wide dynamic range (several orders of magnitude) of protein concentration cause several difficulties in the identification of low-abundance CSF proteins. In this study, advantage was taken of the range of different hydrophobic properties of CSF proteins, and a reversed-phase solid-phase extraction (SPE) cartridge was used to prefractionate human lumbar CSF proteins into three separate fractions prior to two-dimensional gel electrophoresis resolution of the proteome. A portion of the high-abundance CSF proteins were removed from two (eluted with 35% and 50% acetonitrile) of the three fractions. Some trace CSF proteins were preferentially enriched in the two fractions, and many proteins were detected in the two-dimensional (2-D) gels of the two fractions. Among the novel proteins identified, sixty-two protein spots that represent forty-two proteins were characterized. Most of the proteins have not been annotated in any previous 2-D map of human CSF, and several have been implicated in CNS diseases. The prefractionation of CSF proteins with SPE, followed by proteomics analysis, provides a new method to explore low-abundance, disease-specific CSF proteins.     

抗癌药物紫杉醇的提取与分离纯化技术

本对紫杉醇的提取与分离纯化技术,包括柱层析法、薄层色谱法、沉淀法、胶束动电毛细管色普法、膜分离法、树脂吸附分离法、高速逆流色谱法、化学反应法和药理作用靶点法进行了较全面的综述。     

Cell Surface Measurements in Hydrocarbon and Carbohydrate Fermentations

Acinetobacter calcoaceticus was grown in 11-liter batch fermentations with hexadecane or sodium citrate as the sole source of carbon. Surface and interfacial tension measurements of the microbial broth indicated that surface-active compounds were being produced only during growth on the hydrocarbon substrate. Contact angle measurements of an aqueous drop on a smooth lawn of cells in a hexadecane bath indicated a highly hydrophobic surface of the cells in the initial stages of the hydrocarbon fermentation (120° contact angle). At this stage, the entire cell population was bound to the hydrocarbon-aqueous interface. The contact angle dropped rapidly to approximately 45° after 14 h into the fermentation. This coincided with a shift of the cell population to the aqueous phase. Thus, the cells demonstrated more hydrophilic characteristics in the later stages of the fermentation. Contact angles on cells grown on sodium citrate ranged from 18 to 24° throughout the fermentation. The cells appear to be highly hydrophilic during growth on a soluble substrate. From the contact angle and aqueous-hydrocarbon interfacial tension, the surface free energy of the cells was calculated along with the cell-aqueous and cell-hydrocarbon interfacial tension. The results of these measurements were useful in quantitatively evaluating the hydrophobic nature of the cell surface during growth on hydrocarbons and comparing it with the hydrophilic nature of the cell surface during growth on a soluble substrate.     

High-performance liquid chromatographic procedures for the quantitative determination of paclitaxel (Taxol) in human urine

A reversed-phase high-performance liquid chromatographic (RP-HPLC) method has been developed and validated for the quantitative determination of paclitaxel in human urine. A comparison is made between solid-phase extraction (SPE) and liquid-liquid extraction (LLE) as sample pretreatment. The HPLC system consists of an APEX octyl analytical column and acetonitrile-methanol-0.2 μM ammonium acetate buffer pH 5 (4:1:5, v/v) as the mobile phase. Detection is performed by UV absorbance measurement at 227 nm. The SPE procedure involves extraction on Cyano Bond Elut columns. n-Butylchloride is the organic extraction fluid used for the LLE. The recoveries of paclitaxel in human urine are 79 and 75% for SPE and LLE, respectively. The accuracy for the LLE and SPE sample pretreatment procedures is 100.4 and 104.9%, respectively, at a 5 μg/ml drug concentration. The lower limit of quantitation is 0.01 μg/ml for SPE and 0.25 μg/ml for LLE. Stability data of paclitaxel in human urine are also presented.     

High-temperature solid-phase microextraction procedure for the detection of drugs by gas chromatography–mass spectrometry

High-temperature headspace solid-phase microextraction (SPME) with simultaneous (“in situ”) derivatisation (acetylation or silylation) is a new sample preparation technique for the screening of illicit drugs in urine and for the confirmation analysis in serum by GC–MS. After extraction of urine with a small portion of an organic solvent mixture (e.g., 2 ml of hexane–ethyl acetate) at pH 9, the organic layer is separated and evaporated to dryness in a small headspace vial. A SPME-fiber (e.g., polyacrylate) doped with acetic anhydride–pyridine (for acetylation) is exposed to the vapour phase for 10 min at 200°C in a blockheater. The SPME fiber is then injected into the GC–MS for thermal desorption and analysis. After addition of perchloric acid and extraction with n-hexane to remove lipids, the serum can be analysed after adjusting to pH 9 as described for urine. Very clean extracts are obtained. The various drugs investigated could be detected and identified in urine by the total ion current technique at the following concentrations: amphetamines (200 μg/l), barbiturates (500 μg/l), benzodiazepines (100 μg/l), benzoylecgonine (150 μg/l), methadone (100 μg/l) and opiates (200 μg/l). In serum all drugs could be detected by the selected ion monitoring technique within their therapeutic range. As compared to liquid–liquid extraction only small amounts of organic solvent are needed and larger amounts of the pertinent analytes could be transferred to the GC column. In contrast to solid-phase extraction (SPE), the SPME-fiber is reusable several times (as there is no contamination by endogenous compounds). The method is time-saving and can be mechanised by the use of a dedicated autosampler.     

Use of guanidine hydrochloride and ammonium sulfate in comprehensive in-line sorption enrichment of xenobiotics in biological fluids by high-performance liquid chromatography

A novel approach has been developed for direct injection of physiological fluids on an in-line extraction pre-column followed by column switching in order to introduce the adsorbed xenobiotic onto the analytical column. The physiological fluid is pre-treated with guanidinium solution in water (200 μl of fluid plus 300 μl of a reagent containing 8.05 M guanidinium and 1.02 M ammonium sulfate) in order to denature protein binding sites and to serve as a universal solvent for a divergent range of polar to non-polar xenobiotics in a hydrophilic medium. A 0.5 M ammonium sulfate solution (500 μl) is used as a pre- and post-flush reagent for the extraction pre-column (30 mm × 2.1 mm I.D.). The pre-flush reagent prepares the sorbent environment of the C₁₈ pre-column for the hydrophobic retention of analytes. The post-flush reagent flushes non-retained sample proteins and salts to waste prior to switching the pre-column in-line with the analytical column. Universal chromatographic conditions for the analytical phase allows elution of a range of polar to non-polar xenobiotics within 20 min from an end-capped C₈ silica anaytical column (250 mm × 4.6 mm I.D.). This is effected by a linear gradient from a binary system consisting of solvent A (0.05 M KH₂PO₄) and solvent B (acetonitrile—isopropanol, 80:20, v/v).     

Determination of estramustine phosphate and its metabolites estromustine, estramustine, estrone and estradiol in human plasma by liquid chromatography with fluorescence detection and gas chromatography with nitrogen-phosphorus and mass spectrometric detection

Bioanalytical methods for the determination of estramustine phosphate by liquid chromatography and its four main metabolites estromustine, estramustine, estrone and estradiol by gas chromatography are described. For the estramustine phosphate assay the plasma was purified by protein precipitation followed by a C₁₈ solid-phase extraction. For the metabolite assay the plasma samples were purified by a C₁₈ solid-phase and liquid–liquid extraction procedure and derivatised by silanization. Thereafter, estramustine and estromustine were quantified by gas chromatography with nitrogen-phosphorus detection and estradiol and estrone were quantified by gas chromatography with selected ion monitoring. The methods were validated with respect to linearity, selectivity, precision, accuracy, limit of quantitation, limit of detection, recovery and stability. The limit of quantitation was 2.3 μmol/l for estramustine phosphate, 30 nmol/l for estromustine and estramustine, 12 nmol/l for estrone and 8 nmol/l for estradiol. The results showed good precision and accuracy for estramustine phosphate and the four metabolites. The intermediate precision was 6.2–13.5% (C.V.) and the accuracy was 91.8–103.9%.     

Coextraction during reactive extraction of phenylalanine using Aliquat 336: modeling extraction equilibrium

Reactive liquid-liquid extraction can be used to recover hydrophilic fermentation products that would not otherwise partition into nonpolar solvents through an ion-exchange reaction at the two-phase interface. However, the ion-exchange reagent may not be specific to the solute of interest and other compounds present may also be extracted. In this study, the effect on solute extraction of other compounds present in the extraction medium was investigated for phenylalanine extraction using Aliquat 336. The extent of extraction at equilibrium was modeled using the equilibrium constants for the reactions present in the process. The interaction of different species within a multicomponent medium was examined using the model and experimental results. It was found that the extent of extraction and coextraction is controlled by the thermodynamics of each extraction reaction and, due to the formation of a common product, the interaction between each of the reactions. The main competition to reactive extraction will come from hydrophobic anionic compounds that will be present in fermentation broth.     

Binding and detection of glycosaminoglycans immobilized on membranes treated with cationic detergents

Immobilization of molecules on surfaces is used for preparative, quantitative, and qualitative studies. Glycosaminoglycans (GAGs) are strongly hydrophilic and negatively charged molecules that do not bind well to either polystyrene surfaces or hydrophobic blotting membranes. Hydrophobic membranes were derivatized with cationic detergents to become hydrophilic and positively charged. The ability of the polyvinylidene fluoride and nitrocellulose membranes to retain GAGs increased up to 12.8 microg per spot in the dot blot assay when the membrane was treated with a cationic detergent. Immobilized GAGs were stained with alcian blue, and the staining intensity was quantitated by scanning and densitometry. The derivatized membranes were used for solid-phase extraction of GAGs in blood plasma, urine, or cerebrospinal fluid. The detection sensitivity was equal for different types of GAGs but there was a slight negative interference from fibrinogen in blood plasma. The immobilized GAGs could also be released from the membrane using a nonionic detergent at high ionic strength. Recovery of different proteoglycan populations, separated by electrophoresis and detected by reversible staining with toluidine blue, was 70-100%.     

Gas chromatographic—mass spectrometric screening procedure for the identification of formaldehyde-derived tetrahydroisoquinolines in human urine

A gas chromatographic—mass spectrometric method has been developed for the identification of 1,2,3,4-tetrahydroisoquinoline and six metabolites extracted from urine in the picogram range. The derivatization procedure for the substances, formed by reaction of formaldehyde with biogenic amines, employs propionic anhydride and can take place in aqueous medium. In this way artificial formation of these compounds via condensation of biogenic amines with aldehydes or α-keto acids during the work-up procedure is eliminated. The procedure results in hydrophobic compounds, which are quantitatively extractable by liquid—liquid extraction with organic solvents. Further clean-up was performed by solid-phase extraction on C₁₈ sample preparation columns.     

Gas chromatographic determination of midazolam in low-volume plasma samples

A gas chromatographic method for the sensitive determination of midazolam in plasma volumes as low as 40 μl was developed, utilizing clinazolam as the internal standard. After liquid-liquid extraction at basic pH into 1-chlorobutane-dichloromethane (96:4) a 2- to 4-μl portion of the reconstituted extract was injected under electronic pressure control onto a 12 m × 0.2 mm I.D. methyl silicone capillary column, and was exposed to a three-step temperature program from 120 to 310°C, to separate the analytes from the plasma constituents. The compound of interest was identified and quantified by means of a mass-selective detector. The assay was linear from 10 to 500 ng/ml using 40 μl of plasma (limit of quantification: 10 ng/ml) and was linear from 0.25 to 100 ng/ml using 500 μl of plasma (limit of quantification: 0.25 ng/ml). The intra-day precision for the 40-μl aliquots varied from 2.2 to 6.6%, the corresponding accuracy from −7.4 to −4.4%; the inter-day precision ranged from 5 to 7.2% and the corresponding accuracy from −7.2 to −5.1%.     

Recognition of protein complexation based on hydrophobicity distribution

The identification of the surface area able to generate the protein-protein complexation ligand and ion ligation is critical for the recognition of the biological function of particular proteins. The technique based on the analysis of the irregularity of hydrophobicity distribution is used as the criterion for the recognition of the interaction regions. Particularly, the exposure of hydrophobic residues on the surface of protein as well as the localization of the hydrophilic residues in the hydrophobic core is treated as potential area ready to interact with external molecules. The model based on the “fuzzy oil drop” approach treating the protein molecule as the drop of hydrophobicity concentrated in the central part of structure with the hydrophobicity close to zero on the surface according to 3-dimensional Gauss function. The comparison with the observed hydrophobicy in particular protein reveals some irregularities. These irregularities seem to represent the aim-oriented localization.     

Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and functionalized to render their top surfaces hydrophilic. The combination of a physical feature (the pillar) with a chemical boundary (the hydrophilic film on the top of the pillar) provides both a physical and chemical heterogeneity that pins the triple contact line, a necessary feature to create stable long but narrow capillary bridges. The substrates with the pillars are attached to glass slides and secured into custom holders. The holders are then mounted onto four axis microstages and positioned such that the pillars are parallel and facing each other. The capillary bridges are formed by introducing a fluid in the gap between the two substrates once the separation between the facing pillars has been reduced to a few hundred micrometers. The custom microstage is then employed to vary the height of the capillary bridge. A CCD camera is positioned to image either the length or the width of the capillary bridge to characterize the morphology of the fluid interface. Pillars with widths down to 250 µm and lengths up to 70 mm were fabricated with this method, leading to capillary bridges with aspect ratios (length/width) of over 100¹.     

Liquid chromatographic–electrospray tandem mass spectrometric determination of novel antifungal agents in plasma

A rapid, selective, sensitive and reproducible HPLC–electrospray tandem mass spectrometric method has been developed for the analysis of novel triazole antifungal agents, SYN-2869 and its derivatives (SYN-2836, SYN-2903 and SYN-2921), in rat plasma using SYN-2506 as an internal standard. Isolation of these compounds from plasma and sample desalting were performed by a simple extraction procedure involving protein precipitation, vacuum-drying and reconstitution with acetonitrile. For all the agents, linearity was observed over the range of 10–10 000 ng/ml (r≥0.996) and the limit of quantitation was 10 ng/ml using a 100-μl plasma volume. A measurement rate of 400–500 samples/day/instrument could be achieved using this method.