Genetic analysis of resistance to yellow rust in hexaploid wheat using a mixture model for multiple crosses

DNA-based molecular markers have been used in numerous studies for tagging specific genes in wheat for subsequent use in marker-assisted selection. Usually in plant breeding, procedures for mapping genes are based on analysis of a single segregating population. However, breeding programmes routinely evaluate large numbers of progeny derived from multiple-related crosses with some parental lines shared. In most such related crosses, the number of progeny is quite small. Thus, statistical techniques for detecting quantitative trait loci (QTLs) using data from conventional multi-cross breeding programmes are interesting. The objective of this study is to present a mixture model for QTL mapping in crosses of multiple inbred varieties with non-normal phenotype distributions and to use this model to map QTLs for yellow rust resistance in elite wheat breeding material. Three doubled haploid populations consisting of 41, 42 and 55 lines, respectively, originating from four parental varieties were studied. Multi-cross QTL analysis with three specific pathogen isolates of Puccinia striiformis f. sp. tritici and a mixture of the isolates revealed QTLs for resistance at four different genomic locations. These QTLs were found on chromosome 2AL, 2AS, 2BL and 6BL and explained between 21 and 41% of the phenotypic variation. Two of these QTLs, one on the long arm of chromosome 2A and one on the short arm of chromosome 2A were identical to the known yellow rust resistance genes Yr32 and Yr17, respectively, whereas the QTLs located on the long arms of chromosomes 2B and 6B may reflect types of resistance to yellow rust, which have not previously been mapped.     

Molecular detection of QTLs for agronomic and quality traits in a doubled haploid population derived from two Canadian wheats (Triticum aestivum L.)

Development of high-yielding wheat varieties with good end-use quality has always been a major concern for wheat breeders. To genetically dissect quantitative trait loci (QTLs) for yield-related traits such as grain yield, plant height, maturity, lodging, test weight and thousand-grain weight, and for quality traits such as grain and flour protein content, gluten strength as evaluated by mixograph and SDS sedimentation volume, an F₁-derived doubled haploid (DH) population of 185 individuals was developed from a cross between a Canadian wheat variety “AC Karma” and a breeding line 87E03-S2B1. A genetic map was constructed based on 167 marker loci, consisting of 160 microsatellite loci, three HMW glutenin subunit loci: Glu-A1, Glu-B1 and Glu-D1, and four STS-PCR markers. Data for investigated traits were collected from three to four environments in Manitoba, Canada. QTL analyses were performed using composite interval mapping. A total of 50 QTLs were detected, 24 for agronomic traits and 26 for quality-related traits. Many QTLs for correlated traits were mapped in the same genomic regions forming QTL clusters. The largest QTL clusters, consisting of up to nine QTLs, were found on chromosomes 1D and 4D. HMW glutenin subunits at Glu-1 loci had the largest effect on breadmaking quality; however, other genomic regions also contributed genetically to breadmaking quality. QTLs detected in the present study are compared with other QTL analyses in wheat.     

Association mapping for pre-harvest sprouting resistance in white winter wheat

Association mapping identified quantitative trait loci (QTLs) and the markers linked to pre-harvest sprouting (PHS) resistance in an elite association mapping panel of white winter wheat comprising 198 genotypes. A total of 1,166 marker loci including DArT and SSR markers representing all 21 chromosomes of wheat were used in the analysis. General and mixed linear models were used to analyze PHS data collected over 4 years. Association analysis identified eight QTLs linked with 13 markers mapped on seven chromosomes. A QTL was detected on each arm of chromosome 2B and one each on chromosome arms 1BS, 2DS, 4AL, 6DL, 7BS and 7DS. All except the QTL on 7BS are located in a location similar to previous reports and, if verified, the QTL on 7BS is likely to be novel. Principal components and the kinship matrix were used to account for the presence of population structure but had only a minor effect on the results. Although, none of the QTLs was highly significant across all environments, a QTL on the long arm of chromosome 4A was detected in three different environments and also using the best linear unbiased predictions over years. Although previous reports have identified this as a major QTL, its effects were minor in our biparental mapping populations. The results of this study highlight the benefits of association mapping and the value of using elite material in association mapping for plant breeding programs.     

Mapping quantitative trait loci controlling common bunt resistance in a doubled haploid population derived from the spring wheat cross RL4452 × AC Domain

Wheat resistance to common bunt is a highly desirable trait for environmentally friendly grain grade protection. Valuable breeding achievements have been made to develop wheat varieties with enhanced resistance to the disease, and mapping of race-specific resistance genes has been reported. However, less is known of the chromosomal regions that control non-race specific resistance to common bunt. In this study, we have characterized a segregating population of 185 doubled haploid spring wheat lines derived from the cross RL4452 × AC Domain. Reactions to a mixture of common bunt races were assessed under field simulated spring-sown conditions in greenhouses in two locations over 2 years. A total 369 polymorphic maker loci including 356 microsatellite loci, five expressed sequences tag (ESTs), and eight genes were used to develop a linkage map. Quantitative trait loci (QTL) analysis using composite interval mapping detected three QTLs associated with common bunt resistance, of which two were located on chromosome 1B and one on chromosome 7A. AC Domain alleles contributed the common bunt resistance at all three QTLs. Usefulness of gene tagging within the identified chromosomal regions for common bunt resistance breeding is discussed.     

QTL mapping for yield and yield contributing traits in two mapping populations of bread wheat

In bread wheat, single-locus and two-locus QTL analyses were conducted for seven yield and yield contributing traits using two different mapping populations (P I and P II). Single-locus QTL analyses involved composite interval mapping (CIM) for individual traits and multiple-trait composite interval mapping (MCIM) for correlated yield traits to detect the pleiotropic QTLs. Two-locus analyses were conducted to detect main effect QTLs (M-QTLs), epistatic QTLs (E-QTLs) and QTL × environment interactions (QE and QQE). Only a solitary QTL for spikelets per spike was common between the above two populations. HomoeoQTLs were also detected, suggesting the presence of triplicate QTLs in bread wheat. Relatively fewer QTLs were detected in P I than in P II. This may be partly due to low density of marker loci on P I framework map (173) than in P II (521) and partly due to more divergent parents used for developing P II. Six QTLs were important which were pleiotropic/coincident involving more than one trait and were also consistent over environments. These QTLs could be utilized efficiently for marker assisted selection (MAS).     

Mapping quantitative trait loci for milling quality, protein content and color characteristics of rice using a recombinant inbred line population derived from an elite rice hybrid

Milling properties, protein content, and flour color are important factors in rice. A marker-based genetic analysis of these traits was carried out in this study using recombinant inbred lines (RILs) derived from an elite hybrid cross ’Shanyou 63’, the most-widely grown rice hybrid in production in China. Correlation analysis shows that the traits were inter-correlated, though the coefficients were generally small. Quantitative trait locus (QTL) analysis with both interval mapping (IM) and composite interval mapping (CIM) revealed that the milling properties were controlled by the same few loci that are responsible for grain shape. The QTL located in the interval of RM42-C734b was the major locus for brown rice yield, and the QTL located in the interval of C1087-RZ403 was the major locus for head rice yield. These two QTLs are the loci for grain width and length, respectively. The Wx gene plays a major role in determining protein content and flour color, and is modified by several QTLs with minor effect. The implications of the results in rice breeding were discussed. Received: 15 September 2000 / Accepted: 31 March 2001     

AB-QTL analysis in winter wheat: I. Synthetic hexaploid wheat (<Emphasis Type="Italic">T. turgidum</Emphasis> ssp. <Emphasis Type="Italic">dicoccoides </Emphasis> × <Emphasis Type="Italic">T. tauschii</Emphasis>) as a source of favourable alleles for milling and baking quality traits

The advanced backcross QTL (AB-QTL) strategy was utilised to locate quantitative trait loci (QTLs) for baking quality traits in two BC₂F₃ populations of winter wheat. The backcrosses are derived from two German winter wheat cultivars, Batis and Zentos, and two synthetic, hexaploid wheat accessions, Syn022 and Syn086. The synthetics originate from hybridisations of wild emmer (T. turgidum spp. dicoccoides) and T. tauschii, rather than from durum wheat and T. tauschii and thus allowed for the first time to test for exotic QTL effects on wheat genomes A and B in addition to genome D. The investigated quality traits comprised hectolitre weight, grain hardness, flour yield Type 550, falling number, grain protein content, sedimentation volume and baking volume. One hundred and forty-nine SSR markers were applied to genotype a total of 400 BC₂F₃ lines. For QTL detection, a mixed-model ANOVA was conducted, including the effects DNA marker, BC₂F₃ line, environment and marker × environment interaction. Overall 38 QTLs significant for a marker main effect were detected. The exotic allele improved trait performance at 14 QTLs (36.8%), while the elite genotype contributed the favourable effect at 24 QTLs (63.2%). The favourable exotic alleles were mainly associated with grain protein content, though the greatest improvement of trait performance due to the exotic alleles was achieved for the traits falling number and sedimentation volume. At the QTL on chromosome 4B the exotic allele increased the falling number by 19.6% and at the QTL on chromosome 6D the exotic allele led to an increase of the sedimentation volume by 21.7%. The results indicate that synthetic wheat derived from wild emmer × T. tauschii carries favourable QTL alleles for baking quality traits, which might be useful for breeding improved wheat varieties by marker-assisted selection.     

Genome-Wide Association Mapping for Yield and Other Agronomic Traits in an Elite Breeding Population of Tropical Rice (Oryza sativa)

Genome-wide association mapping studies (GWAS) are frequently used to detect QTL in diverse collections of crop germplasm, based on historic recombination events and linkage disequilibrium across the genome. Generally, diversity panels genotyped with high density SNP panels are utilized in order to assay a wide range of alleles and haplotypes and to monitor recombination breakpoints across the genome. By contrast, GWAS have not generally been performed in breeding populations. In this study we performed association mapping for 19 agronomic traits including yield and yield components in a breeding population of elite irrigated tropical rice breeding lines so that the results would be more directly applicable to breeding than those from a diversity panel. The population was genotyped with 71,710 SNPs using genotyping-by-sequencing (GBS), and GWAS performed with the explicit goal of expediting selection in the breeding program. Using this breeding panel we identified 52 QTL for 11 agronomic traits, including large effect QTLs for flowering time and grain length/grain width/grain-length-breadth ratio. We also identified haplotypes that can be used to select plants in our population for short stature (plant height), early flowering time, and high yield, and thus demonstrate the utility of association mapping in breeding populations for informing breeding decisions. We conclude by exploring how the newly identified significant SNPs and insights into the genetic architecture of these quantitative traits can be leveraged to build genomic-assisted selection models.     

基于单片段代换系的水稻穗长QTL加性及其上位性效应

穗长是影响水稻（Oryza sativa）产量的重要因子之一,研究水稻穗长QTL间的上位性效应对于发掘水稻产量潜力具有重要意义。该研究以16个单片段代换系（single segment substitution lines,SSSLs）和15个双片段聚合系（double segment pyramiding lines,DSPLs）为材料研究了水稻穗长QTL的加性及上位性效应。以P〈0.01为阈值,共检测到6个穗长QTL和9对基因互作座位。其中2个（Pl-2和Pl-10）是尚未报道的穗长QTL。穗长QTL互作后,一些互作对的上位性效应与单个QTL的作用方式及效应大小各不相同,预示着基因聚合后会产生不同的互作效应。该研究结果对于通过分子聚合育种手段改良穗长具有重要意义。     

Mapping QTLs associated with drought avoidance in upland rice grown in the Philippines and West Africa

Localizing genes that contribute to drought avoidance in a quantitative way should enable the exploitation of these genes in breeding through marker-assisted selection, and may lead to the discovery of gene identity and function. Between 110 and 176 F₆ recombinant inbred lines from a mapping population derived from a cross of upland rice varieties Bala and Azucena have been evaluated for indicators of drought avoidance in sites in the Philippines and West Africa over two dry seasons. A molecular map with 102 RFLP, 34 AFLP and six microsatellite markers has been used to map (by composite interval mapping) quantitative trait loci (QTLs) for the visual scores of leaf rolling and leaf drying and leaf relative water content. QTLs were mapped for each site and across sites. A total of 17 regions were identified which contained QTLs with a LOD score greater than 3.2. For leaf rolling, Bala was the parent contributing the majority of positive alleles whilst for the other traits, Bala and Azucena contributed more evenly. Six of the 17 regions influenced more than one trait, explaining the phenotypic correlations between traits that were observed. Three QTLs appeared to be specific to the Philippines experiments. One QTL had opposing effects in the Philippines and West Africa. QTLs for relative water content were detected on chromosome 8, congruent with an osmotic adjustment QTL identified in another population. Only three of the QTLs identified here have not been reliably identified in the two other populations that have been screened for drought avoidance. By using several populations assessed for drought avoidance in different sites, the distribution and utility of QTLs for drought avoidance in rice is being elucidated.     

Chromosomal location of wheat genes of the carotenoid biosynthetic pathway and evidence for a catalase gene on chromosome 7A functionally associated with flour b* colour variation

Knowledge of molecular and genetic mechanisms controlling wheat grain quality characteristics is significant for improving flour for end-product functionality. Flour b* colour is an important quality trait for breeding wheat varieties to produce grain for specific market requirements. The degree of flour yellowness is due to the accumulation of carotenoids in grain, particularly lutein. Flour b* is under polygenic control and quantitative trait loci (QTL) have frequently been reported on chromosome 7AL. Analysis of carotenoid genes showed that phytoene synthase (PSY) co-located to the QTL on 7AL but other genes at this locus are also thought to contribute flour b* colour variation. This study used the wheat genome survey sequence and identified the chromosomal location of all wheat carotenoid genes, but none other than PSY were located on 7AL and, therefore, other genes may control flour b* colour variation including oxidative genes that degrade carotenoids. An investigation of EST bin mapped to 7AL identified a gene encoding a catalase enzyme (Cat3-A1) that was phylogenetically related to other plant class III enzymes, co-located to the QTL for flour b* colour variation on 7AL in three mapping populations and expressed during seed development. Therefore, Cat3-A1 was functionally associated with flour b* colour variation. Catalase acts upon hydrogen peroxide as a substrate and it was postulated that Cat3-A1 alleles control varying degrees of bleaching action on lutein in developing wheat grain. Markers for Cat3-A1 developed in this study can be used in conjunction with other candidate gene markers including phytoene synthase and lycopene-ε-cylase to develop a molecular signature for selecting lines with specific flour b* colour values in wheat breeding.     

Mapping quantitative trait loci in selected breeding populations: A segregation distortion approach

Quantitative trait locus (QTL) mapping is often conducted in line-crossing experiments where a sample of individuals is randomly selected from a pool of all potential progeny. QTLs detected from such an experiment are important for us to understand the genetic mechanisms governing a complex trait, but may not be directly relevant to plant breeding if they are not detected from the breeding population where selection is targeting for. QTLs segregating in one population may not necessarily segregate in another population. To facilitate marker-assisted selection, QTLs must be detected from the very population which the selection is targeting. However, selected breeding populations often have depleted genetic variation with small population sizes, resulting in low power in detecting useful QTLs. On the other hand, if selection is effective, loci controlling the selected trait will deviate from the expected Mendelian segregation ratio. In this study, we proposed to detect QTLs in selected breeding populations via the detection of marker segregation distortion in either a single population or multiple populations using the same selection scheme. Simulation studies showed that QTL can be detected in strong selected populations with selected population sizes as small as 25 plants. We applied the new method to detect QTLs in two breeding populations of rice selected for high grain yield. Seven QTLs were identified, four of which have been validated in advanced generations in a follow-up study. Cloned genes in the vicinity of the four QTLs were also reported in the literatures. This mapping-by-selection approach provides a new avenue for breeders to improve breeding progress. The new method can be applied to breeding programs not only in rice but also in other agricultural species including crops, trees and animals.     

Fine mapping and candidate gene prediction of a major QTL for kernel number per ear in maize

Kernel number per ear (KNE) is a maize yield component and an important breeding target for improving grain yield. As a complex quantitative trait, KNE has been assumed to be controlled by a set of quantitative trait loci (QTLs) with minor effects. Identification and genetic evaluation of these QTLs are prerequisites for improving KNE with a molecular breeding approach. In this study, we developed the chromosome segment introgression line SL19-41, which exhibited 95.60% recovery of the Ye478 background and showed a higher KNE and grain yield. The plant architecture and flowering time of SL19-41 were not significantly different from those of Ye478. We employed introgression line (IL)-derived mapping populations and identified a major QTL, KNE4, which is partially dominant. KNE4 was validated in a backcross population and a set of sub-introgression lines and was delimited to a 440-kb genomic region in Bin4.07. An allele included in the introgression fragment had a synergistic effect, noticeably increasing KNE and showing the potential to improve KNE in Ye478. Subsequently, the association between sequence polymorphism in the QTL interval and KNE variation revealed a putative candidate gene that encoded a long-chain acyl-CoA synthetase responsible. This result provides an available locus for the molecular improvement of KNE and for the isolation of functional genes underlying this QTL.     

Molecular genetic analysis of grain protein content and flour whiteness degree using RILs in common wheat

Grain protein content (GPC) and flour whiteness degree (FWD) are important qualitative traits in common wheat. Quantitative trait locus (QTL) mapping for GPC and FWD was conducted using a set of 131 recombinant-inbred lines derived from the cross ‘Chuan 35050 × Shannong 483’ in six environmental conditions. A total of 22 putative QTLs (nine GPC and 13 FWD) were identified on 12 chromosomes with individual QTL explaining 4.5–34.0% phenotypic variation. Nine QTLs (40.9%) were detected in two or more environments. The colocated QTLs were on chromosomes 1B and 4B. Among the QTLs identified for GPC, QGpc.sdau-4A from the parent Shannong 483 represented some important favourable QTL alleles. QGpc.sdau-2A.1 and QFwd.sdau-2A.1 had a significant association with both GPC and FWD. The markers detected on top of QTL regions could be potential targets for marker-assisted selection.     

Trade-offs in the genetic control of functional and nutritional quality traits in UK winter wheat

A complex network of trade-offs exists between wheat quality and nutritional traits. We investigated the correlated relationships among several milling and baking traits as well as mineral density in refined white and whole grain flour. Our aim was to determine their pleiotropic genetic control in a multi-parent population over two trial years with direct application to practical breeding. Co-location of major quantitative trait loci (QTL) and principal component based multi-trait QTL mapping increased the power to detect QTL and revealed pleiotropic effects explaining many complementary and antagonistic trait relationships. High molecular weight glutenin subunit genes explained much of the heritable variation in important dough rheology traits, although additional QTL were detected. Several QTL, including one linked to the TaGW2 gene, controlled grain size and increased flour extraction rate. The semi-dwarf Rht-D1b allele had a positive effect on Hagberg falling number, but reduced grain size, specific weight, grain protein content and flour water absorption. Mineral nutrient concentrations were lower in Rht-D1b lines for many elements, in wholemeal and white flour, but potassium concentration was higher in Rht-D1b lines. The presence of awns increased calcium content without decreasing extraction rate, despite the negative correlation between these traits. QTL were also found that affect the relative concentrations of key mineral nutrients compared to phosphorus which may help increase bioavailability without associated anti-nutritional effects of phytic acid. Taken together these results demonstrate the potential for marker-based selection to optimise trait trade-offs and enhance wheat nutritional value by considering pleiotropic genetic effects across multiple traits.Subject terms: Plant breeding, Quantitative trait, Genetic variation     

A QTL study on late leaf spot and rust revealed one major QTL for molecular breeding for rust resistance in groundnut (Arachis hypogaea L.)

Late leaf spot (LLS) and rust are two major foliar diseases of groundnut (Arachis hypogaea L.) that often occur together leading to 50–70% yield loss in the crop. A total of 268 recombinant inbred lines of a mapping population TAG 24 × GPBD 4 segregating for LLS and rust were used to undertake quantitative trait locus (QTL) analysis. Phenotyping of the population was carried out under artificial disease epiphytotics. Positive correlations between different stages, high to very high heritability and independent nature of inheritance between both the diseases were observed. Parental genotypes were screened with 1,089 simple sequence repeat (SSR) markers, of which 67 (6.15%) were found polymorphic. Segregation data obtained for these markers facilitated development of partial linkage map (14 linkage groups) with 56 SSR loci. Composite interval mapping (CIM) undertaken on genotyping and phenotyping data yielded 11 QTLs for LLS (explaining 1.70–6.50% phenotypic variation) in three environments and 12 QTLs for rust (explaining 1.70–55.20% phenotypic variation). Interestingly a major QTL associated with rust (QTL_rust01), contributing 6.90–55.20% variation, was identified by both CIM and single marker analysis (SMA). A candidate SSR marker (IPAHM 103) linked with this QTL was validated using a wide range of resistant/susceptible breeding lines as well as progeny lines of another mapping population (TG 26 × GPBD 4). Therefore, this marker should be useful for introgressing the major QTL for rust in desired lines/varieties of groundnut through marker-assisted backcrossing.     

Mapping of QTLs governing agronomic and yield traits in chickpea

Chickpea is one of the most important leguminous cool season food crops, cultivated prevalently in South Asia and Middle East. The main objective of this study was to identify quantitative trait loci (QTLs) associated with seven agronomic and yield traits in two recombinant inbred line populations of chickpea derived from the crosses JG62 × Vijay (JV population) and Vijay × ICC4958 (VI population) from at least three environments. Single locus QTL analysis involved composite interval mapping (CIM) for individual traits and multiple-trait composite interval mapping (MCIM) for correlated traits to detect pleiotropic QTLs. Two-locus analysis was conducted to identify the main effect QTLs (M-QTLs), epistatic QTLs (E-QTLs) and QTL × environment interactions. Through CIM analysis, a total of 106 significant QTLs (41 in JV and 65 in VI populations) were identified for the seven traits, of which one QTL each for plant height and days to maturity was common in both the populations. Six pleiotropic QTLs that were consistent over the environments were also identified. LG2 in JV and LG1a in VI contained at least one QTL for each trait. Hence, concentrating on these LGs in molecular breeding programs is most likely to bring simultaneous improvement in these traits.     

Mapping of quantitative trait loci controlling broomrape (Orobanche crenata Forsk.) resistance in faba bean (Vicia faba L.).

Orobanche crenata Forsk. is a root parasite that produces devastating effects on many crop legumes and has become a limiting factor for faba bean production in the Mediterranean region. The efficacy of available control methods is minimal and breeding for broomrape resistance remains the most promising method of control. Resistance seems to be scarce and complex in nature, being a quantitative characteristic difficult to manage in breeding programmes. To identify and map the QTLs (quantitative trait loci) controlling the trait, 196 F2 plants derived from the cross between a susceptible and a resistant parent were analysed using isozymes, RAPD, seed protein genes, and microsatellites. F2-derived F3 lines were studied for broomrape resistance under field conditions. Of the 130 marker loci segregating in the F2 population, 121 could be mapped into 16 linkage groups. Simple interval mapping (SIM) and composite interval mapping (CIM) were performed using QTL Cartographer. Composite interval mapping using the maximum number of markers as cofactors was clearly the most efficient way to locate putative QTLs. Three QTLs for broomrape resistance were detected. One of the three QTLs explained more than 35% of the phenotypic variance, whereas the others accounted for 11.2 and 25.5%, respectively. This result suggests that broomrape resistance in faba bean can be considered a polygenic trait with major effects of a few single genes.     

Conditional QTL mapping of protein content in wheat with respect to grain yield and its components

Grain protein content in wheat (Triticum aestivum L.) is generally considered a highly heritable character that is negatively correlated with grain yield and yield-related traits. Quantitative trait loci (QTL) for protein content was mapped using data on protein content and protein content conditioned on the putatively interrelated traits to evaluate possible genetic interrelationships between protein content and yield, as well as yield-related traits. Phenotypic data were evaluated in a recombinant inbred line population with 302 lines derived from a cross between the Chinese cultivar Weimai 8 and Luohan 2. Inclusive composite interval mapping using IciMapping 3.0 was employed for mapping unconditional and conditional QTL with additives. A strong genetic relationship was found between protein content and grain yield, and yield-related traits. Unconditional QTL mapping analysis detected seven additive QTL for protein content, with additive effects ranging in absolute size from 0.1898% to 0.3407% protein content, jointly accounting for 43.45% of the trait variance. Conditional QTL mapping analysis indicated two QTL independent from yield, which can be used in marker-assisted selection for increasing yield without affecting grain protein content. Three additional QTL with minor effects were identified in the conditional mapping. Of the three QTLs, two were identified when protein content was conditioned on yield, which had pleiotropic effects on those two traits. Conditional QTL mapping can be used to dissect the genetic interrelationship between two traits at the individual QTL level for closely correlated traits. Further, conditional QTL mapping can reveal additional QTL with minor effects that are undetectable in unconditional mapping.     

Construction of Chromosome Segment Substitution Lines in Peanut (Arachis hypogaea L.) Using a Wild Synthetic and QTL Mapping for Plant Morphology

Chromosome segment substitution lines (CSSLs) are powerful QTL mapping populations that have been used to elucidate the molecular basis of interesting traits of wild species. Cultivated peanut is an allotetraploid with limited genetic diversity. Capturing the genetic diversity from peanut wild relatives is an important objective in many peanut breeding programs. In this study, we used a marker-assisted backcrossing strategy to produce a population of 122 CSSLs from the cross between the wild synthetic allotetraploid (A. ipaënsis×A. duranensis)^4x and the cultivated Fleur11 variety. The 122 CSSLs offered a broad coverage of the peanut genome, with target wild chromosome segments averaging 39.2 cM in length. As a demonstration of the utility of these lines, four traits were evaluated in a subset of 80 CSSLs. A total of 28 lines showed significant differences from Fleur11. The line×trait significant associations were assigned to 42 QTLs: 14 for plant growth habit, 15 for height of the main stem, 12 for plant spread and one for flower color. Among the 42 QTLs, 37 were assigned to genomic regions and three QTL positions were considered putative. One important finding arising from this QTL analysis is that peanut growth habit is a complex trait that is governed by several QTLs with different effects. The CSSL population developed in this study has proved efficient for deciphering the molecular basis of trait variations and will be useful to the peanut scientific community for future QTL mapping studies.