Standardization of in vitro micropropagation of Winter Jasmine (Jasminum nudiflorum) using nodal explants

Present investigation was carried out to arrive at an effective micropropagation protocol for Winter Jasmine (Jasminum nudiflorum) using nodal segments from actively growing plants as explants. Explants were collected from current season shoots during April-May just after the initiation of new flush. Combined sterilization treatment of explants with 1.0% NaOCl₂ for 10 min followed by 70% ethanol for 10 s recorded highest culture survival (63.88%) and optimum culture asepsis (63.88%) followed by the treatment containing 0.1% HgCl₂ for 10 min followed by 70% ethanol for 10 s with culture survival (61.11%) and culture asepsis (69.44%). Highest culture establishment (80.55%) and minimum days to bud sprouting (7.62 days) was recorded with Benzyl adenine + Kinetin (3.0 + 1.0 mgL^?1) but maximum length (4.33 cm) and leaf number (7.78) of established micro shoots was recorded with Benzyl adenine + Kinetin (1.0 + 0.5 mgL^?1). Maximum proliferated shoots (2.41) and an optimum proliferation percentage (77.78 %) was recorded with Benzyl adenine + Kinetin (3.0 + 0.5 mgL^?1). Minimum size of proliferated shoots (2.02 cm) was recorded with Benzyl adenine + Kinetin (3.0 + 1.0 mgL^?1) followed by 2.25 cm recorded with Benzyl adenine + Kinetin (3.0 + 0.5 mgL^?1). Highest rooting (63.93%), primary root number/microshoot (4.74) and longest primary roots (34.67 mm) were recorded with IBA (2.0 mgL^?1). IBA yielded better results than NAA in terms of higher rooting percentage and root number. However, days to root initiation were found minimum (22.00) with 2.0 mgL^?1 of NAA. Highest ex vitro survival of rooted microshoots (89.67%) was recorded with IBA (2.0 mgL^?1).     

Vase life of cut rose cultivars ‘Avalanche’ and ‘Fiesta’ as affected by Nano-Silver and S-carvone treatments

Rosa hybrida L. is an important commercial cut flower. The vase life of this flower is usually short due to vascular occlusion. We assessed the effect of Nano-Silver (NS) and S-carvone in prolonging the vase life of R. hybrida L. cv. ‘Avalanche’ and ‘Fiesta’. Hence, an experiment involving the treatment with NS at 0, 50, 100, and 200 mgL^− 1 and S-carvone at 0, 0.25, 0.5, and 0.75 mgL^− 1 with 10 replicates was conducted. Applying NS pulse treatments increased vase life, water uptake rate, and fresh weight and reduced the number of bacteria, water loss, stomatal conductance and transpiration rate. However, S-carvone treatments did not have a positive effect on the vase-life parameters of cut rose flowers. NS pulse treatments increased relative fresh weight (RFW), and water uptake rate (WUR) and decreased water loss (WL) (%) by 10, 89 and 31% for cultivar ‘Avalanche’, compared to the controls, respectively. Application of 200 mgL^− 1 NS led to the highest vase life (18 days) for roses. The results show that NS increased vase life by suppressing stomatal opening, decreasing transpiration from leaves and inhibiting bacterial proliferation.     

Analysis of histidine and urocanic acid isomers by reversed-phase high-performance liquid chromatography

The qualitative separation performance of a C₁₈, C₈ and C₄ reversed-phase column was investigated for the separation of histidine and its metabolites histamine, 1-methyihistamine and trans- and cis-urocanic acid. Trans- and cis-urocanic acid were baseline separated from their precursor histidine on all three columns using isocratic elution with a mobile phase composed of 0.01 M aqueous TEAP pH 3.0 and acetonitrile at a ratio of 98:2 (v/v). However, histidine was not separated from histamine and 1-methyihistamine. Selecting the C₈ column and introducing 0.005 M of the ion pairing reagent 1-octanesulfonic acid sodium salt into the aqueous solution and acetonitrile at a ratio of 90:10 (v/v), significantly improved the separation. The separation was also followed by a change in the retention times and the order of elution. The sequence of elution was histidine, cis-urocanic acid, trans-urocanic acid, histamine and 1-methylhistamine with retention times of 5.58±0.07, 7.03±0.15, 7.92±0.18, 18.77±0.24 and 20.79±0.21 min (mean±SD; n=5). The separation on the C₈ column in the presence of the ion-pairing reagent was further improved with gradient elution that resulted in a reduction in the retention times and elution volumes of histamine and 1-methylhistamine. The detection limits of histidine and trans-urocanic acid at a wavelength of 210 nm and an injection volume of 0.05 ml were 5×10⁻⁸ mol l⁻¹ (n=3). The kinetic of the in-vitro conversion of trans- into the cis-isomer after UV irradiation was depending on the time of exposure and the energy of the light source. UVB light induced a significantly faster conversion than UVA light. TUCA and cUCA samples kept at −25°C were stable for up to 50 weeks. Samples, eluted from human skin showed various concentrations of histidine and trans- and cis-urocanic acid with an average of 1.69±0.33×10⁻⁵ mol l⁻¹, 1.17±0.43×10⁻⁵ mol l⁻¹ and 1.67±0.33×10⁻⁵ mol l⁻¹, respectively (n=8).     

Physical characterisations of a single-stage Kühni-type aqueous two-phase extraction column

The main parameters which influence the behaviour of phase separation in a single-stage Kühni-type aqueous two-phase extraction column containing polyethylene (PEG) and di-potassium hydrogen phosphate were characterised. Two aqueous two-phase system (ATPS) composed of 12% (w/w) PEG 1450 and 12% (w/w) di-potassium hydrogen phosphate (designated as 12/12) and 12% (w/w) PEG 1450 and 11% (w/w) di-potassium hydrogen phosphate (designated as 12/11) were chosen in this study. The hold-up ɛ_D increased with increasing impeller speeds and mobile phase flow rates. Phase separation for the 12/11 system was slower than that for the 12/12 system, which resulted in higher dispersed phase hold-up values for the 12/11 system. For 12/12 system, mass transfer of plasmid DNA (pDNA) from the dispersed mobile phase to the stationary phase increased rapidly with increasing impeller speeds of 130, 160 and 200 rpm which was reflected in the decreased values for C_T/C_To. The degree of back-mixing quantified by the axial dispersion coefficient D_ax was estimated to be 2.7 × 10⁻⁶ m² s⁻¹.     

Amperometric biosensor based on a site-specific immobilization of acetylcholinesterase via affinity bonds on a nanostructured polymer membrane with integrated multiwall carbon nanotubes

Acetylcholinesterase (AChE) was immobilized on chemically modified poly-(acrylonitrile-methyl-methacrylate-sodium vinylsulfonate) membranes in accordance with three different methods, the first of which involved random enzyme immobilization via glutaraldehyde, the second one—site-specific enzyme immobilization via glutaraldehyde and Concanavalin A (Con A) and the third method—modified site-specific enzyme immobilization via glutaraldehyde in the presence of a mixture of multiwall carbon nanotubes and albumin (MWCNs + BSA), glutaraldehyde and Con A. Preliminary tests for the activity of immobilized AChE were carried out using these three methods. The third method was selected as the most efficient one for the immobilization of AChE and the prepared enzyme carriers were used for the construction of amperometric biosensors for the detection of acetylthiocholine (ATCh).A five level three factorial central composite design was chosen to determine the optimal conditions for the enzyme immobilization with three critical variables: concentration of enzyme, Concanavalin A and MWCNs. The design illustrated that the optimum values of the factors influencing the amperometric current were C_E: 70 U mL⁻¹; C_{Con A}: 1.5 mg mL⁻¹ and C_MWCN: 11 mg mL⁻¹, with an amperometric current 0.418 μA. The basic amperometric characteristics of the constructed biosensor were investigated. A calibration plot was obtained for a series of ATCh concentrations ranging from 5 to 400 μM. A linear interval was detected along the calibration curve from 5 to 200 μM. The correlation coefficient for this concentration range was 0.995. The biosensor sensitivity was calculated to be 0.065 μA μM⁻¹ cm⁻². The detection limit with regard to ATCh was calculated to be 0.34 μM. The potential application of the biosensor for detection and quantification of organophosphate pesticides was investigated as well. It was tested against sample solutions of Paraoxon. The biosensor detection limit was determined to be 1.39 × 10⁻¹² g L⁻¹ of Paraoxon, as well as the interval (10⁻¹¹ to 10⁻⁸ g L⁻¹) within which the biosensor response was linearly dependant on the Paraoxon concentration. Finally the storage stability of the enzyme carrier was traced for a period of 120 days. After 30-day storage the sensor retained 76% of its initial current response, after 60 days—68% and after 120 days—61%.     

Biosynthesis of ethyl caproate and other short ethyl esters catalyzed by cutinase in organic solvent

The main objective of this work was to study the enzymatic synthesis of short chain ethyl esters, a group of relevant aroma molecules, by Fusarium solani pisi cutinase in an organic solvent media (iso-octane), and to assess the influence of different parameters on the reaction yield.Cutinase displayed high initial esterification rates in iso-octane, which amounted to 1.15 μmol min⁻¹ mg⁻¹ for ethyl butyrate (C₄ acid chain) and 1.06 μmol min⁻¹ mg⁻¹ for ethyl valerate (C₅ acid chain). High product yields, 84% for ethyl butyrate and 96% for ethyl valerate, were observed after 6 h of reaction, for an initial equimolar concentration of substrates (0.1 M).The highest product yield (97%) was observed for ethyl caproate (C₆) synthesis, a compound which is a part of natural apple and pineapple flavour, for an alcohol:acid molar ratio of 2 (0.2 M ethanol concentration).Cutinase affinity for short chain length carboxylic acids (C₄–C₆) in ester synthesis in iso-octane confirmed previous observations in reversed micellar system.     

Design,synthesis and evaluation of [3H]PF-7191, a highly specific nociceptin opioid peptide (NOP) receptor radiotracer for in vivo receptor occupancy (RO) studies

Herein we report the identification of (+)-N-(2-((1H-pyrazol-1-yl)methyl)-3-((1R,3r,5S)-6′-fluoro-8-azaspiro[bicyclo[3.2.1]octane-3,1′-isochroman]-8-yl)propyl)-N-[³H]-methylacetamide {[³H]PF-7191 [(+)-11]} as a promising radiotracer for the nociceptin opioid peptide (NOP) receptor. (+)-11 demonstrated high NOP binding affinity (K_i = 0.1 nM), excellent selectivity over other opioid receptors (>1000×) and good brain permeability in rats (C_b,u/C_p,u = 0.29). Subsequent characterization of [³H](+)-11 showed a high level of specific binding and a brain bio-distribution pattern consistent with known NOP receptor expression. Furthermore, the in vivo brain binding of [³H](+)-11 in rats was inhibited by a selective NOP receptor antagonist in a dose–responsive manner. This overall favorable profile indicated that [³H](+)-11 is a robust radiotracer for pre-clinical in vivo receptor occupancy (RO) measurements and a possible substrate for carbon-11 labeling for positron emission tomography (PET) imaging in higher species.     

Mycoremediation of oil contaminant by Pleurotus florida (P.Kumm) in liquid culture

This study investigated the potential functions of Pleurotus florida (an edible mushroom) in the biodegradation of gas oil at concentrations of 0 (control), 2.5, 5, and 10% (V: V) for 30 days. The gas oil increased dry weight and protein concentration in all treatments (by an average of 19.5 and 108%, respectively). Moreover, the pH, surface tension (ST), and interfacial tension (IFT) were reduced by the mushroom supplementation. The lowest surface tension (31.9 mN m⁻¹) and the highest biosurfactant production belonged to the 10% gas oil treatment (0.845 ± 0.03 mg mL⁻¹). The results demonstrated that the adsorption isotherm agreed well with the Langmuir isotherm. The maximum Langmuir adsorption capacity was calculated at 0.743 mg g⁻¹ wet biomass of P. florida. The fungal supplementation efficiently remedied the total petroleum hydrocarbons (TPHs) by an average of 55% after 30 days. Gas chromatography (GC) analysis revealed that P. florida effectively detoxified C₁₃–C₂₈ hydrocarbons, Pristane, and Phytane, implying its high mycoremediation function. The toxicity test showed that mycoremediation increased the germination by an average of 35.82% ± 8.89 after 30 days. Laccase activity increased significantly with increasing gas oil concentration in the treatments. The maximum laccase activity was obtained in the 10% gas oil treatment (142.25 ± 0.72 U L⁻¹). The presence of pollutants was also associated with induction in the tyrosinase activity when compared to the control. These results underline the high mycoremediation capacity of P. florida through the involvement of biosurfactants, laccase, and tyrosinase.     

Effect of fatty acid substrate chain length on Pseudomonas aeruginosa ATCC 9027 monorhamnolipid yield and congener distribution

Rhamnolipids are surface-active molecules produced by Pseudomonas aeruginosa as congener mixtures. They are considered “green” alternatives to synthetic surfactants used in industrial, remediation and pharmaceutical applications. Optimizing yield as well as controlling congener distribution are necessary steps for successful commercialization of rhamnolipids. This study used a mixture of glucose and fatty acids of different chain length (C₁₂–C₂₂) and saturation (C_18:1 and C_18:2) to produce monorhamnolipids and determine the effect of fatty acid substrates on rhamnolipid yield, percent carbon conversion and congener distribution. Results show that 1% glucose + 0.25% stearic acid (C₁₈) produced the greatest yield (2.1 g L⁻¹) compared to other glucose–fatty acid combinations (0.8–1.8 g L⁻¹). Various glucose + C₁₈ ratios were then tested to optimize yield and percent substrate carbon conversion to monorhamnolipid. Results revealed a positive linear correlation between the mass percent of C₁₈ used and the percent carbon conversion. A mass percent of 67% C₁₈ was optimal resulting in a 44% carbon conversion and a yield of 13.7 g L⁻¹ monorhamnolipid. For all fatty acid substrates tested, the RhaC₁₀C₁₀ was the most abundant and RhaC₁₀C_12:1 was the least abundant of the four major congeners produced. However, the relative amount of RhaC₁₀C₈ and RhaC₁₀C₁₂ congeners was dependent on several factors: in general, fatty acid substrates with relatively short chain length (C₁₂ and C₁₄), unsaturated fatty acid substrate (_C18:2), and longer cultivation time resulted in a higher RhaC₁₀C₈/RhaC₁₀C₁₂ ratio. These findings will assist in mass production of monorhamnolipids and controlling the specific congeners produced.     

Effects of acute cigarette smoke concentrate exposure on mitochondrial energy transfer in fast- and slow-twitch skeletal muscle

The mechanisms underlying cigarette smoke-induced mitochondrial dysfunction in skeletal muscle are still poorly understood. Accordingly, this study aimed to examine the effects of cigarette smoke on mitochondrial energy transfer in permeabilized muscle fibers from skeletal muscles with differing metabolic characteristics. The electron transport chain (ETC) capacity, ADP transport, and respiratory control by ADP were assessed in fast- and slow-twitch muscle fibers from C57BL/6 mice (n = 11) acutely exposed to cigarette smoke concentrate (CSC) using high-resolution respirometry. CSC decreased complex I-driven respiration in the white gastrocnemius (CONTROL:45.4 ± 11.2 pmolO₂.s⁻¹.mg⁻¹ and CSC:27.5 ± 12.0 pmolO₂.s⁻¹.mg⁻¹; p = 0.01) and soleus (CONTROL:63.0 ± 23.8 pmolO₂.s⁻¹.mg⁻¹ and CSC:44.6 ± 11.1 pmolO₂.s⁻¹.mg⁻¹; p = 0.04). In contrast, the effect of CSC on Complex II-linked respiration increased its relative contribution to muscle respiratory capacity in the white gastrocnemius muscle. The maximal respiratory activity of the ETC was significantly inhibited by CSC in both muscles. Furthermore, the respiration rate dependent on the ADP/ATP transport across the mitochondrial membrane was significantly impaired by CSC in the white gastrocnemius (CONTROL:-70 ± 18 %; CSC:-28 ± 10 %; p < 0.001), but not the soleus (CONTROL:47 ± 16 %; CSC:31 ± 7 %; p = 0.08). CSC also significantly impaired mitochondrial thermodynamic coupling in both muscles. Our findings underscore that acute CSC exposure directly inhibits oxidative phosphorylation in permeabilized muscle fibers. This effect was mediated by significant perturbations of the electron transfer in the respiratory complexes, especially at complex I, in both fast and slow twitch muscles. In contrast, CSC-induced inhibition of the exchange of ADP/ATP across the mitochondrial membrane was fiber-type specific, with a large effect on fast-twitch muscles.     

Effective biodegradation of 2,4,6-trinitrotoluene using a novel bacterial strain isolated from TNT-contaminated soil

In this environmental-sample based study, rapid microbial-mediated degradation of 2,4,6-trinitrotoluene (TNT) contaminated soils is demonstrated by a novel strain, Achromobacter spanius STE 11. Complete removal of 100 mg L⁻¹ TNT is achieved within only 20 h under aerobic conditions by the isolate. In this bio-conversion process, TNT is transformed to 2,4-dinitrotoluene (7 mg L⁻¹), 2,6-dinitrotoluene (3 mg L⁻¹), 4-aminodinitrotoluene (49 mg L⁻¹) and 2-aminodinitrotoluene (16 mg L⁻¹) as the key metabolites. A. spanius STE 11 has the ability to denitrate TNT in aerobic conditions as suggested by the dinitrotoluene and NO₃ productions during the growth period. Elemental analysis results indicate that 24.77 mg L⁻¹ nitrogen from TNT was accumulated in the cell biomass, showing that STE 11 can use TNT as its sole nitrogen source. TNT degradation was observed between pH 4.0–8.0 and 4–43 °C; however, the most efficient degradation was at pH 6.0–7.0 and 30 °C.     

Comparison of Zostera marina and maerl community metabolism

The photosynthetic and repiratory metabolism of Zostera marina and maerl communities was compared, in the same area of the Bay of Brest in March–April, using benthic chambers. P–E curves for both oxygen and carbon were established for bottom irradiances between 0 and 525 μmol m⁻² s⁻¹. An exponential function was fitted to calculate daily production. Community metabolic quotients did not differ for maerl and seagrass beds. Community photosynthetic quotients were significantly higher (1.19) whereas community respiratory quotients were lower (0.70) than 1. Maerl and seagrass bed P–E curves mainly differed by the minimum saturating irradiance (E_k). Net community production was estimated to 26.8 mmol C m⁻² d⁻¹ for Z. marina meadows and 8.6 mmol C m⁻² d⁻¹ for maerl beds. The two communities can, therefore, be considered as autotrophic during the March–April period. Community respiration did not differ between Z. marina meadows and maerl beds, with an average value of 53.8 mmol C m⁻² d⁻¹ during a day. In similar environmental conditions, the production of maerl beds corresponds to approximately one third that of seagrass meadows. The maerl communities, therefore, form productive ecosystems, relevant to temperate coastal ecosystems functioning.     

Desulphurization characteristics of bamboo charcoal from sulfur solution

Sulfur powder and sulfur dioxide (SO₂) often floated in air, produced acid rain and algal blooms, and could cause diseases. Bamboo charcoal could have adsorption and filtration properties. In order to figure out the optimal adsorption condition and the intrinsic change of the bamboo charcoal, five chemicals were adsorbed by bamboo charcoal and were analyzed by FT-IR. Fe₂(SO₄)₃’s, Na₂SO₄’s, Na₂S₂O₈’s, S’s, and Na₂SO₃’s optimal adsorption condition was the concentration of 19 g/1000 g and stir time of 20 min, 21 g/1000 g and stir time of 60 min, 7 g/1000 g and stir time of 120 min, 11 g/1000 g and stir time of 120 min, 21 g/1000 g and stir time of 60 min, respectively. FT-IR spectra showed that for FT-IR spectra of Fe₂(SO₄)₃, the transmissivity of the peaks at 3435 cm⁻¹ and 2925 cm⁻¹ achieved the maximum for 60 min and the concentration was 19 g/1000 g, the transmissivity of the peaks at 1630 cm⁻¹, 1060 cm⁻¹ and 660 cm⁻¹ achieved the maximum for 60 min and the concentration was 7 g/1000 g. For FT-IR spectra of Na₂SO₄, the transmissivity of the peaks at 1630 cm⁻¹, 1060 cm⁻¹ and 660 cm⁻¹ achieved the maximum for 20 min and the concentration was 13 g/1000 g. For FT-IR spectra of Na₂S₂O₈, the transmissivity of the peaks at 3435 cm⁻¹, 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 120 min and the concentration was 19 g/1000 g. For FT-IR spectra of S, the transmissivity of the peaks at 3435 cm⁻¹, 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 20 min and the concentration was 11 g/1000 g, 17 g/1000 g and 21 g/1000 g. For FT-IR spectra of Na₂SO₃, the transmissivity of the peaks at 3435 cm⁻¹ achieved the maximum for 120 min and the concentration was 5 g/1000 g, the transmissivity of the peaks at 2925 cm⁻¹, 1630 cm⁻¹ and 1060 cm⁻¹ achieved the maximum for 120 min and the concentration was 11 g/1000 g. In these states, the number of the transmissivity of the maximum peaks is the largest.     

Optimizing nitrogen supply promotes biomass,physiological characteristics and yield components of soybean (Glycine max L. Merr.)

Avoidable or inappropriate nitrogen (N) fertilizer rates harmfully affect the yield production and ecological value. Therefore, the aims of this study were to optimize the rate and timings of N fertilizer to maximize yield components and photosynthetic parameter of soybean. This field experiment consists of five fertilizer N rates: 0, 75, 150, 225 and 300 kg N ha⁻¹ arranged in main plots and four N fertilization timings: V₅ (trifoliate leaf), R₂ (full flowering stage) and R₄ (full poding stage), and R₆ (full seeding stage) growth stages organized as subplots. Results revealed that 225 kg N ha⁻¹ significantly enhanced grain yield components, total chlorophyll (Chl), photosynthetic rate (P_N), and total dry biomass and N accumulation by 20%, 16%, 28%, 7% and 12% at R₄ stage of soybean. However, stomatal conductance (g_s), leaf area index (LAI), intercellular CO₂ concentration (Ci) and transpiration rate (E) were increased by 12%, 88%, 10%, 18% at R₆ stage under 225 kg N ha⁻¹. Grain yield was significantly associated with photosynthetic characteristics of soybean. In conclusion, the amount of nitrogen 225 kg ha⁻¹ at R₄ and R₆ stages effectively promoted the yield components and photosynthetic characteristics of soybean.     

High-level production of biologically active chemokines in Escherichia coli

The chemokines eotaxin-1 (CCL11) and eotaxin-2 (CCL24), belonging to the CC chemokines family, play key roles in the inflammatory response, allergic asthma and other diseases. When expressed in Escherichia coli, chemokines are prone to form inclusion bodies devoid of biological activity, and it is hard to refold them properly. Here an expression and purification protocol for high-level production of soluble and biologically active CCL11 and CCL24 in E. coli has been established. A final yield of 8.7 mg/l for CCL11 and 3.9 mg/l for CCL24 has been obtained and the purified proteins were characterized with SDS-PAGE, mass spectrometry and circular dichroism. High binding affinity of purified chemokines with CC chemokine receptor type 3 (CCR3) has been confirmed with surface plasmon resonance (SPR) and the K_D values are 3.7 × 10⁻⁷ M and 3.0 × 10⁻⁷ M, respectively, for CCL11 and CCL24. This report provides a straightforward strategy for the efficient production of soluble and biologically active chemokines in E. coli.     

Adsorption characteristics of sulfur solution by acticarbon against drinking-water toxicosis

Sulfur and ammonia nitrogen are rich nutrient pollutants, after entering water can cause algal blooms, cause eutrophication of water body, the spread of them will not only pollute the environment, destroy the ecological balance, but also harm human health through food chain channels, especially drinking-water toxicosis. Acticarbon can adsorb harmful substances, it was beneficial for people’s health. In order to figure out the optimal adsorption condition and the intrinsic change of acticarbon, five chemicals were adsorbed by acticarbon and analyzed by FT-IR. The optimal adsorption condition of Fe₂(SO₄)₃, Na₂SO₄, Na₂S₂O₈, S and Na₂SO₃ was 9 g/1000 g at 80 min, 21 g/1000 g at 20 min, 15g/1000 g at 20 min, 21 g/1000 g at 60 min and 21 g/1000 g at 100 min, respectively. FT-IR spectra showed that acticarbon had eight characteristic peaks, such as S-S stretch, H₂O stretch, OH stretch, CH stretch, CO or CC stretch, CH₂ bend, CH were at 3850 cm⁻¹, 3740 cm⁻¹, 3435 cm⁻¹, 2925 cm⁻¹, 1630 cm⁻¹, 1390 cm⁻¹, 1115 cm⁻¹, 600 cm⁻¹, respectively. For FT-IR spectra of Fe₂(SO₄)₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 2925 cm⁻¹ achieved the maximum with 9 g/1000 g at 20 min. For Na₂SO₄, the peaks at 2925 cm⁻¹, 1630 cm⁻¹, 1390 cm⁻¹, 1115 cm⁻¹, 600 cm⁻¹ achieved the maximum with 21 g/1000 g at 120 min. For ones of Na₂S₂O₈, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 1390 cm⁻¹, 1115 cm⁻¹, 600 cm⁻¹, achieved the maximum with 2 g/1000 g at 80 min. For ones of S, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 2925 cm⁻¹ achieved the maximum with 19 g/1000 g at 100 min, the peaks at 1390 cm⁻¹, 1115 cm⁻¹, 600 cm⁻¹ achieved the maximum with 19 g/1000 g at 20 min. For FT-IR spectra of Na₂SO₃, the peaks at 1630 cm⁻¹, 1390 cm⁻¹, 1115 cm⁻¹, 600 cm⁻¹ achieved the maximum with 2 g/1000 g at 100 min. It provided that acticarbon could adsorb and desulphurize from sulfur solution against drinking-water toxicosis.     

Kinetics of CO substitution in Co4(CO)12 and Rh4(CO)12

The kinetics of rapid CO substitution by PPh₃ in Co₄(CO)₁₂ and Rh₄(CO)₁₂ have been examined by stopped-flow and low temperature FT-IR methods. In Co₄(CO)₁₂ rapid (k_obs ∼ 1.8 s⁻¹) substitution of CO occurs after a 1–15 s induction period at 28 °C in C₆H₅Cl solvent by a catalytic process. Addition of PPh₃ to Rh₄(CO)₁₂ yields Rh₄(CO)₁₁(PPh₃) according to a predominantly second order rate law k₁[Rh₄- (CO)₁₂] + k₂[Rh₄(CO)₁₂][PPh₃] with k₁ = 25 ± 11 s⁻¹ and k₂ = 2.97 ± 0.27 X 10⁴ M⁻¹ s⁻¹ at 28 °C. Substitution of a second CO ligand also occurs rapidly with k₁ = 0.15 ± 0.09 s⁻¹ and k₂ = 6.54 ± 0.07 X 10² M⁻¹ s⁻¹ at 28 °C. The reactivity of Rh₄(CO)₁₂ toward associative substitution is 10⁴– 10¹¹ faster than for the Co and Ir analogues, In Rh₄(CO)₁₁(PPh₃) the increase in CO substitution rates over Co and Rh analogues is 10²–10⁷. The ordering of associative substitution rates Co << Rh >>> Ir in these clusters exaggerates the trend seen in mononuclear metal complexes.     

Novel toxins produced by the dinoflagellate Karenia brevisulcata

Karenia brevisulcata (Chang), a new toxic dinoflagellate of the genus Karenia was isolated from a harmful algal bloom that occurred in Wellington Harbour, New Zealand in 1998. The bloom severely affected most marine biota resulting in long-term ecological damage and causing respiratory distress in harbour bystanders. Cultures of K. brevisulcata produced a range of novel toxins including ten lipid-soluble K. brevisulcata toxins (KBTs) and six water-soluble brevisulcatic acids (BSXs). Brevetoxins were not detected. KBT-F, KBT-G, BSX-1 and BSX-2 were isolated from 1450 L of bulk cultures and purified in mg quantities. Preliminary chemical and toxicological investigations show that KBT-F (M 2054 C₁₀₇H₁₆₀O₃₈) and KBT-G (M 2084 C₁₀₈H₁₆₂O₃₉) are complex polycyclic ethers with UVmax at 227 nm. NMR data gave characteristics of ladder frame polyether structures and a 2-methylbut-2-enal side chain, similar to gymnocins. The mouse i.p. LD₅₀s for KBT-F and -G were 0.032 and 0.040 mg kg⁻¹, respectively. These KBTs were also highly cytotoxic and haemolytic. BSX-1 (M 916 C₄₉H₇₂O₁₆) and BSX-2 (M 872 C₄₇H₆₈O₁₅) are polycyclic ether dicarboxylates with UVmax 196 nm. BSX-4 and BSX-5, the lactone ring-closed analogues and the presumed primary toxins in the algal cells, were isolated in smaller quantities. Preliminary structural information from NMR and MS showed a carboxylated side chain and some similarities to brevetoxin-A. However, the structures have not yet been fully elucidated due to conformers confounding the NMR. The mouse i.p. LD₅₀ for BSX-1 was 3.9 mg kg⁻¹ while no deaths were seen in mice injected with BSX-2 at 6.6 mg kg⁻¹. The LD₅₀s for the lactones BSX-4 and -5 were 1.4 and 1.6 mg kg⁻¹ respectively. BSX-4 and -5 were agonists of voltage-gated sodium channels but only weakly haemolytic. Activities in the Neuro-2a cytotoxicity assay were ca 10% of dihydrobrevetoxin-2 and were fully antagonised by saxitoxin.     

Continuous succinic acid production by Actinobacillus succinogenes in a biofilm reactor: Steady-state metabolic flux variation

Continuous anaerobic fermentations were performed in a novel external-recycle, biofilm reactor using d-glucose and CO₂ as carbon substrates. Succinic acid (SA) yields were found to be an increasing function of glucose consumption with the succinic acid to acetic acid ratio increasing from 2.4 g g⁻¹ at a glucose consumption of 10 g L⁻¹, to 5.7 g g⁻¹ at a glucose consumption of 50 g L⁻¹. The formic acid to acetic acid ratio decreased from an equimolar value (0.77 g g⁻¹) at a glucose consumption of 10 g L⁻¹ to a value close to zero at 50 g L⁻¹. The highest SA yield on glucose and highest SA titre obtained were 0.91 g g⁻¹ and 48.5 g L⁻¹ respectively. Metabolic flux analysis based on the established C₃ and C₄ metabolic pathways of Actinobacillus succinogenes revealed that the increase in the succinate to acetate ratio could not be attributed to the decrease in formic acid and that an additional source of NADH was present. The fraction of unaccounted NADH increased with glucose consumption, suggesting that additional reducing power is present in the medium or is provided by the activation of an alternative metabolic pathway.     

Reevaluation of the rate constants for the reaction of hypochlorous acid (HOCl) with cysteine,methionine, and peptide derivatives using a new competition kinetic approach

Activated white cells use oxidants generated by the heme enzyme myeloperoxidase to kill invading pathogens. This enzyme utilizes H₂O₂ and Cl⁻, Br⁻, or SCN⁻ to generate the oxidants HOCl, HOBr, and HOSCN, respectively. Whereas controlled production of these species is vital in maintaining good health, their uncontrolled or inappropriate formation (as occurs at sites of inflammation) can cause host tissue damage that has been associated with multiple inflammatory pathologies including cardiovascular diseases and cancer. Previous studies have reported that sulfur-containing species are major targets for HOCl but as the reactions are fast the only physiologically relevant kinetic data available have been extrapolated from data measured at high pH (>10). In this study these values have been determined at pH 7.4 using a newly developed competition kinetic approach that employs a fluorescently tagged methionine derivative as the competitive substrate (k(HOCl + Fmoc-Met), 1.5×10⁸ M⁻¹ s⁻¹). This assay was validated using the known k(HOCl + NADH) value and has allowed revised k values for the reactions of HOCl with Cys, N-acetylcysteine, and glutathione to be determined as 3.6×10⁸, 2.9×10⁷, and 1.24×10⁸ M⁻¹ s⁻¹, respectively. Similar experiments with methionine derivatives yielded k values of 3.4×10⁷ M⁻¹ s⁻¹ for Met and 1.7×10⁸ M⁻¹ s⁻¹ for N-acetylmethionine. The k values determined here for the reaction of HOCl with thiols are up to 10-fold higher than those previously determined and further emphasize the critical importance of reactions of HOCl with thiol targets in biological systems.