内侧开放楔形胫骨高位截骨术治疗膝关节内翻畸形的疗效及对术后下肢力线和创伤应激的影响

摘要 目的：对比内侧开放楔形胫骨高位截骨术（OWHTO）、人工全膝关节置换术（TKA）治疗膝关节内翻畸形的疗效及对术后下肢力线和创伤应激的影响。方法：回顾性分析贵州医科大学附属医院2020年3月~2022年1月期间接收的膝关节内翻畸形患者临床资料,共计75例。根据手术方案的不同分为OWHTO组（n=40）和TKA组（n=35）。对比两组围术期指标、视觉疼痛模拟评分（VAS）评分、美国特种外科医院（HSS）膝关节评分、膝关节活动度（ROM）、应激指标和术后下肢力线改变情况。结果：OWHTO组手术时间、切口长度短于TKA组,术中出血量、住院费用少于TKA组（P<0.05）。OWHTO组术后1个月VAS评分低于TKA组,ROM、HSS膝关节评分高于对照组（P<0.05）。OWHTO组术后3 d、术后7 d血清皮质醇（COR）、促肾上腺皮质激素（ACTH）水平低于TKA组（P<0.05）。两组术后6个月股胫角（FTA）下降,髋-膝-踝角（HKA）升高（P<0.05）。两组术后6个月FTA、HKA组间对比差异不显著（P>0.05）。两组并发症发生率组间对比未见差异（P>0.05）。结论：OWHTO、TKA这两种治疗方案治疗膝关节内翻畸形,具有相当的疗效,均可有效改善下肢力线,但OWHTO的创伤小、应激程度轻。     

Detection of the hip center in computer-assisted surgery: An in vitro assessment study

The HKA i.e. the angle between the hip, knee and ankle centers is a clinical parameter widely used in orthopedic surgery. It can be intraoperatively assessed with computer-assisted surgery navigation systems by computing the 3D location of these joint centers. The hip center is computed using functional methods but is defined by the experts as the anatomical center of the femoral head. The aim of this in vitro study is therefore to assess, first, the accuracy of these functional methods for the determination of the HKA and, second, their reproducibility. We have analyzed on six cadaveric lower limbs the accuracy and the reproducibility of functional methods and their impact on the HKA values. The anatomical hip center has been used as the reference value. The reproducibility is 5.2 mm for the determination of the functional hip centers. The average impact on the HKA is 1.2° (4° max). Despite a lack of reproducibility of the functional methods, the impact on the HKA is limited. The accuracy of the functional methods on the HKA can therefore be enough for some clinical applications.     

Knee joint angle affects EMG–force relationship in the vastus intermedius muscle

It is not understood how the knee joint angle affects the relationship between electromyography (EMG) and force of four individual quadriceps femoris (QF) muscles. The purpose of this study was to examine the effect of the knee joint angle on the EMG–force relationship of the four individual QF muscles, particularly the vastus intermedius (VI), during isometric knee extensions. Eleven healthy men performed 20–100% of maximal voluntary contraction (MVC) at knee joint angles of 90°, 120° and 150°. Surface EMG of the four QF synergists was recorded and normalized by the root mean square during MVC. The normalized EMG of the four QF synergists at a knee joint angle of 150° was significantly lower than that at 90° and 120° (P < 0.05). Comparing the normalized EMG among the four QF synergists, a significantly lower normalized EMG was observed in the VI at 150° as compared with the other three QF muscles (P < 0.05). These results suggest that the EMG–force relationship of the four QF synergists shifted downward at an extended knee joint angle of 150°. Furthermore, the neuromuscular activation of the VI was the most sensitive to change in muscle length among the four QF synergistic muscles.     

Sharper angle,higher risk? The effect of cutting angle on knee mechanics in invasion sport athletes

IntroductionCutting is an important skill in team-sports, but unfortunately is also related to non-contact ACL injuries. The purpose was to examine knee kinetics and kinematics at different cutting angles.Material and methods13 males and 16 females performed cuts at different angles (45°, 90°, 135° and 180°) at maximum speed. 3D kinematics and kinetics were collected. To determine differences across cutting angles (45°, 90°, 135° and 180°) and sex (female, male), a 4 × 2 repeated measures ANOVA was conducted followed by post hoc comparisons (Bonferroni) with alpha level set at α ≤ 0.05 a priori.ResultsAt all cutting angles, males showed greater knee flexion angles than females (p < 0.01). Also, where males performed all cutting angles with no differences in the amount of knee flexion −42.53° ± 8.95°, females decreased their knee flexion angle from −40.6° ± 7.2° when cutting at 45° to −36.81° ± 9.10° when cutting at 90°, 135° and 180° (p < 0.01). Knee flexion moment decreased for both sexes when cutting towards sharper angles (p < 0.05). At 90°, 135° and 180°, males showed greater knee valgus moments than females. For both sexes, knee valgus moment increased towards the sharper cutting angles and then stabilized compared to the 45° cutting angle (p < 0.01). Both females and males showed smaller vGRF when cutting to sharper angles (p < 0.01).ConclusionIt can be concluded that different cutting angles demand different knee kinematics and kinetics. Sharper cutting angles place the knee more at risk. However, females and males handle this differently, which has implications for injury prevention.     

数字化导航技术在人工全膝关节置换中的初步应用研究

目的:探讨数字化导航技术在人工全膝关节置换术中应用的可行性及初步临床应用。方法:对我院2013年6月至2014年6月行单侧全膝关节置换术的80例患者,按照抽签法随机分为数字化导航组40例及传统手术组40例,导航组术前设计个性化定制导航模板,术中应用导航模板截骨,传统组应用厂家器械截骨。分别测量两组患者手术前后的髋-膝-踝角、冠状面股骨和胫骨截骨面与机械轴夹角、矢状面股骨和胫骨截骨面与外旋和后倾夹角,记录每一例患者手术时间及术中出血量并进行对比。结果:数字化导航组患者的手术时间及术中出血量均少于传统手术组,差异具有统计学意义(P0.05)。与传统手术组比较,数字化导航组术后冠状面FFC角及FTC角平均偏差角度较小,差异具有统计学意义(P0.05)。与传统手术组比较,数字化导航组术后矢状面LFC角及LTC角平均偏差角度较小,差异具有统计学意义(P0.05)。结论:数字化导航技术在人工膝关节置换术中具有快速、个性化及精确性高等优点,值得临床推广应用。     

Surgeon variability in total knee arthroplasty component alignment: a Monte Carlo analysis

Component mal-alignment in total knee arthroplasty has been associated with increased revision rates and poor clinical outcomes. A significant source of variability in traditional, jig-based total knee arthroplasty is the performance of the surgeon. The purpose of this study was to determine the most sensitive steps in the femoral and tibia arthroplasty procedures. A computational model of the total knee arthroplasty procedure was created, and Monte Carlo simulations were performed that included surgeon variability in each step of the procedure. The proportion of well-aligned components from the model agrees with clinical literature in most planes. When components must be aligned within ±3° in all planes, component alignment was most sensitive to the accuracy of identifying the lateral epicondyle for the femoral component, and to the precision of the transverse plane alignment of the extramedullary guide for the tibial component. This model can be used as a tool for evaluating different procedural approaches or sources of variability to improve the quality of the total knee arthroplasty procedure.     

Lower limb joint work and joint work contribution during downhill and uphill walking at different inclinations

Work performance and individual joint contribution to total work are important information for creating training protocols, but were not assessed so far for sloped walking. Therefore, the purpose of this study was to analyze lower limb joint work and joint contribution of the hip, knee and ankle to total lower limb work during sloped walking in a healthy population. Eighteen male participants (27.0 ± 4.7 yrs, 1.80 ± 0.05 m, 74.5 ± 8.2 kg) walked on an instrumented ramp at inclination angles of 0°, ±6°, ±12° and ±18° at 1.1 m/s. Kinematic and kinetic data were captured using a motion-capture system (Vicon) and two force plates (AMTI). Joint power curves, joint work (positive, negative, absolute) and each joint’s contribution to total lower limb work were analyzed throughout the stance phase using an ANOVA with repeated measures. With increasing inclination positive joint work increased for the ankle and hip joint and in total during uphill walking. Negative joint work increased for each joint and in total work during downhill walking. Absolute work was increased during both uphill (all joints) and downhill (ankle & knee) walking. Knee joint contribution to total negative and absolute work increased during downhill walking while hip and ankle contributions decreased. This study identified, that, when switching from level to a 6° and from 6° to a 12° inclination the gain of individual joint work is more pronounced compared to switching from 12° to an 18° inclination. The results might be used for training recommendations and specific training intervention with respect to sloped walking.     

Automated image registration for assessing three-dimensional alignment of entire lower extremity and implant position using bi-plane radiography

An automated image-matching technique is presented to assess alignment of the entire lower extremity for normal and implanted knees and the positioning of implants with respect to bone. Sawbone femur and tibia and femoral and tibial components of a total knee arthroplasty system were used. Three spherical markers were attached to each sawbone and each component to define the local coordinate system. Outlines of the three-dimensional (3D) bone models and component computer-aided design (CAD) models were projected onto extracted contours of the femur, tibia, and implants in frontal and oblique X-ray images. Three-dimensional position of each model was recovered by minimizing the difference between the projected outline and the contour. Median values of the absolute error in estimating relative positions were within 0.5 mm and 0.6° for the femur with respect to the tibia, 0.5 mm and 0.5° for the femoral component with respect to the tibial component, 0.6 mm and 0.6° for the femoral component with respect to the femur, and 0.5 mm and 0.4° for the tibial component with respect to the tibia, indicating significant improvements when compared to manually obtained results.     

全髋关节置换术与人工股骨头置换术治疗老年股骨颈骨折的疗效比较

目的:探讨全髋关节置换术与人工股骨头置换术治疗老年股骨颈骨折的疗效。方法:选择在我院的82例行手术置换治疗的老年股骨颈骨折患者,随机分为观察组和对照组,每组41例。观察组采用全髋关节置换术,而对照组实施人工股骨头置换术。观察并比较两组患者的手术时间、术中出血量、血压、术后引流及髋关节功能等。结果:观察组手术时间、术中出血量及收缩压均显著高于对照组,差异具有统计学意义(P<0.05);术后引流量及并发症的发生率,两组比较无显著性差异(P>0.05)。观察组患者术后Harris评分为(93.25±4.51),对照组患者Harris评分为(82.76±3.82),观察组显著优于对照组,差异具有统计学意义(P<0.05)。结论:与人工股骨头置换术相比,全髋关节置换术用于治疗老年股骨颈骨折具有创伤小,恢复快的临床效果,患者术后髋关节功能恢复情况良好,值得在临床推广应用。     

UKA与TKA治疗膝关节内侧单间室骨性关节炎的临床对比

目的:探究膝关节单髁置换术(UKA)与全膝关节置换术(TKA)治疗膝关节内侧单间室骨性关节炎的临床治疗效果。方法:将2011年4月-2015年7月期间因膝关节单间室骨性关节炎入院接受治疗的89例患者纳入本研究,随机分为研究组和对照组,研究组44例,行UKA手术,对照组45例,采用TKA手术方式治疗。对两组患者进行术后随访,对比临床治疗效果。结果:两组术前均有明显膝关节疼痛,术后膝关节疼痛均明显改善,组间差别无显著统计学意义(X2=1.323,P=0.2500.05);术后膝关节屈曲角度、HSS评分相对于术前均显著改善,研究组术后膝关节屈曲角度(111.2±18.8)度高于对照组的(98.6±14.7)度,差异有统计学意义(P0.05);HSS评分(87.6±13.7)分高于对照组的(73.2±16.8)分,差异有统计学意义(P0.05);研究组膝关节屈曲至90度时间比对照组短,数据差异有统计学差异(t=-2.303,P=0.0240.05)。结论:膝关节内侧单间室骨性关节炎采用UKA与TKA均能取得一定临床效果,减轻患者痛苦,改善膝关节功能,但UKA临床疗效较好,手术创伤较小,术后恢复较快。     

Measurement of human Gracilis muscle isometric forces as a function of knee angle,intraoperatively

The goals of the present study were (1) to measure the previously unstudied isometric forces of activated human Gracilis (G) muscle as a function of knee joint angle and (2) to test whether length history effects are important also for human muscle. Experiments were conducted intraoperatively during anterior cruciate ligament (ACL) reconstruction surgery (n=8). Mean peak G muscle force, mean peak G tendon stress and mean optimal knee angle equals 178.5±270.3 N, 24.4±20.6 MPa and 67.5±41.7°, respectively. The substantial inter-subject variability found (e.g., peak G force ranges between 17.2 and 490.5 N) indicate that the contribution of the G muscle to knee flexion moment may vary considerably among subjects. Moreover, typical subject anthropometrics did not appear to provide a sound estimate of the peak G force: only a limited insignificant correlation was found between peak G force and subject mass as well as mid-thigh perimeter and no correlation was found between peak G force and thigh length. The functional joint range of motion for human G muscle was determined to be at least as wide as full knee extension to 120° of knee flexion. However; the portion of the knee angle–muscle force relationship operationalized is not unique but individual specific: our data suggest for most subjects that G muscle operates in both ascending and descending limbs of its length–force characteristics whereas, for the remainder of the subjects, its function is limited to the descending limb, exclusively. Previous activity of G muscle at high muscle length attained during collection of a complete set of knee angle–force data showed for the first time that such length history effects are important also for human muscles: a significant correlation was found between optimal knee angle and absolute value of % force change. Except for two of the subjects, G muscle force measured at low length was lower than that measured during collection of knee joint–force data (maximally by 42.3%).     

Measurement of coronary bifurcation angle with coronary CT angiography: A phantom study

PurposeAccurate determination of the bifurcation angle and correlation with plaque buildup may lead to the prediction of coronary artery disease (CAD). This work evaluates two techniques to measure bifurcation angles in 3D space using coronary computed tomography angiography (CCTA).Materials and MethodsNine phantoms were fabricated with different bifurcation angles ranging from 55.3° to 134.5°. General X-ray and CCTA were employed to acquire 2D and 3D images of the bifurcation phantoms, respectively. Multiplanar reformation (MPR) and volume rendering technique (VRT) were used to measure the bifurcation angle between the left anterior descending (LAD) and left circumflex arteries (LCx). The measured angles were compared with the true values to determine the accuracy of each measurement technique. Inter-observer variability was evaluated. The two techniques were further applied on 50 clinical CCTA cases to verify its clinical value.ResultsIn the phantom setting, the mean absolute differences calculated between the true and measured angles by MPR and VRT were 2.4° ± 2.2° and 3.8° ± 2.9°, respectively. Strong correlation was found between the true and measured bifurcation angles. Furthermore, no significant differences were found between the bifurcation angles measured using either technique. In clinical settings, large difference of 12.0° ± 10.6° was found between the two techniques.ConclusionIn the phantom setting, both techniques demonstrated a significant correlation to the true bifurcation angle. Despite the lack of agreement of the two techniques in the clinical context, our findings in phantoms suggest that MPR should be preferred to VRT for the measurement of coronary bifurcation angle by CCTA.     

全髋和半髋置换治疗老年股骨颈骨折的临床对比分析

目的:探讨全髋和半髋关节置换术治疗老年股骨颈骨折的临床疗效。方法:选择本院收治的70例老年股骨颈骨折患者,采用随机数字表法将其分为观察组和对照组各35例,观察组给予全髋关节置换术,对照组予以半髋关节置换术,对比两组所用手术时间、术中出血量、术后Harris评分及髋关节功能、术后并发症、疼痛率及翻修率。结果:观察组手术时间为(113.6±19.3)min,术中出血量为(432.1±32.7)ml,均显著高于对照组的(73.1±10.2)min、(201.3±30.1)m L,两组比较差异均有统计学意义(均P0.05);观察组髋关节功能总优良率、Harris评分分别为91.43%,(91.13±5.09)分,显著优于对照组的77.14%、(80.15±4.71)分,两组比较差异均有统计学意义(均P0.05);观察组不良反应发生率及翻修率分别为20.00%、0.00%,低于对照组的22.85%、5.71%,但差异均无统计学意义(均P0.05);观察组疼痛率为5.71%,显著低于对照组的25.71%,两组比较差异有统计学意义(P0.05)。结论:两种术式对股骨颈骨折的老年患者均能起到有效的治疗,均有各自的优缺点,对疼痛较为敏感和活动较多的老年患者而言,宜采用全髋关节置换术。     

前交叉韧带方位角变化的解剖学测量研究

目的:探讨前交叉韧带(anterior cruciate ligament,ACL)在膝关节不同屈曲角度时的方位角变化,为ACL损伤诊断和重建研究提供解剖学支持。方法:成人膝关节标本10具,解剖观察ACL形态,用Photoshop软件测量膝关节不同屈曲角度下ACL方位角变化。结果:0°、30°位膝关节中ACL胫骨角大于ACL股骨角,有显著性差异(P0.01);60°、90°位膝关节中的ACL胫骨角小于股骨角,有显著性差异(P0.01)。膝关节0°、30°、60°、90°ACL胫骨角由大渐小,各角度间均有显著性差异(均P0.01)。膝关节0°和30°的ACL股骨角比60°和90°时小,有显著性差异(均P0.01),0°与30°间无显著性差异(P0.05),60°小于90°,有显著性差异(P0.01)。结论:ACL于膝关节0°和30°位时,后外侧束(posterolateral bundle,PLB)发挥主要作用,ACL诊断或重建主要参考胫骨角;60°、90°时ACL前内侧束(anteromedial bundle,AMB)发挥主要作用,ACL诊断或重建主要参考股骨角。ACL方位角可作为ACL损伤诊断和手术重建的重要参考。     

Reliability and agreement of a dynamic quadriceps incremental test for the assessment of neuromuscular function

The quadriceps-intermittent-fatigue (QIF) test assesses knee extensors strength, endurance and performance fatigability in isometric condition. We aimed to assess reliability and agreement for this test in dynamic conditions and with the use of transcranial magnetic stimulation. On two separate sessions, 20 young adults (25 ± 4 yr, 10 women) performed stages of 100 knee extensors concentric contractions at 120°/s (60° range-of-motion) with 10% increments of the initial maximal concentric torque until exhaustion. Performance fatigability across the test was quantified as maximal isometric and concentric torque loss, and its mechanisms were investigated through the responses to transcranial magnetic and electrical stimulations. Reliability and agreement were assessed using ANOVAs, coefficients of variation (CVs) and intra-class correlation coefficients (ICCs) with 95% CI. Good inter-session reliability and high agreement were found for number of contractions [489 ± 75 vs. 503 ± 95; P = 0.20; ICC = 0.85 (0.66; 0.94); CV = 5% (3; 7)] and total work [11,285 ± 4,932 vs. 11,792 ± 5838 Nm.s; P = 0.20; ICC = 0.95 (0.87; 0.98); CV = 8% (5; 11)]. Poor reliability but high agreement were observed for isometric [–33 ± 6 vs. −31 ± 7%; P = 0.13; ICC = 0.47 (0.05; 0.75); CV = 6% (4;8)] and concentric [−20 ± 11% vs. −19 ± 9%; P = 0.82; ICC = 0.26 (−0.22; 0.63); CV = 9% (6; 12)] torque loss. The dynamic QIF test represents a promising tool for neuromuscular evaluation in isokinetic mode.     

Effect of hip flexion angle on stiffness of the adductor longus muscle during isometric hip flexion

This study examined the effect of hip flexion angle on the stiffness of the adductor longus (AL) muscle during isometric hip flexion. Seventeen men were recruited. Ten participants performed submaximal voluntary contraction at 0%, 25%, 50%, and 75% of maximal voluntary contraction (MVC) during isometric hip flexion after performing MVC at 0°, 40°, and 80° of hip flexion. Seven participants performed submaximal voluntary tasks during isometric hip extension in addition to hip flexion task. The shear modulus of the AL muscle was used as the index of muscle stiffness, and was measured using ultrasound shear-wave elastography during the tasks at each contraction intensity for each hip flexion angle. During hip flexion, the shear modulus of the AL muscle was higher at 0° than at 40° and 80° of hip flexion at each contraction intensity (p < 0.016). Conversely, a significant effect was not found among hip flexion angle during hip extension at 75% of MVC (p = 0.867). These results suggest that mechanical stress of the AL muscle may be higher at 0° of hip flexion during isometric hip flexion.     

Maximal and submaximal isometric torque is elevated immediately following highly controlled active stretches of the hamstrings

Hamstring strain rehabilitation programs with an eccentric bias are effective but have a low adherence rate. Post-stretch isometric (PS-ISO) contractions which incorporate a highly controlled eccentric contraction followed by an isometric contraction resulting in elevated torque during following stretch, compared with isometric contractions at the same joint angle. This study measured torque, activation and musculotendinous unit behaviour of the hamstrings during PS-ISO contractions of maximal and submaximal levels using two stretch amplitudes. Ten male participants (24.6 years ± 2.22 years) completed maximal and submaximal baseline isometric contractions at 90°, 120° and 150° knee flexion and PS-ISO contractions of maximal and submaximal intensity initiated at 90° and 120° incorporating active stretch of 30° and 60° at 60°·s⁻¹. Torque and muscle activation of the knee flexors were simultaneously recorded. Musculotendinous unit behaviour of the biceps femoris long head was recorded via ultrasound during all PS-ISO contractions. Compared with baseline, torque was 8% and 39% greater in the maximal and submaximal PS-ISO conditions respectively with no change in muscle activation. The biceps femoris long head muscle lengthened during all PS-ISO contractions. PS-ISO contractions may be beneficial where the effects of highly controlled eccentric contractions and elevated isometric torque are desired, such as hamstring rehabilitation.     

Tibio-femoral joint contact in healthy and osteoarthritic knees during quasi-static squat: A bi-planar X-ray analysis

The aim of this study was to quantify the tibio-femoral contact point (CP) locations in healthy and osteoarthritic (OA) subjects during a weight-bearing squat using stand-alone biplanar X-ray images.Ten healthy and 9 severe OA subjects performed quasi-static squats. Bi-planar X-ray images were recorded at 0°, 15°, 30°, 45°, and 70° of knee flexion. A reconstruction/registration process was used to create 3D models of tibia, fibula, and femur from bi-planar X-rays and to measure their positions at each posture. A weighted centroid of proximity algorithm was used to calculate the tibio-femoral CP locations. The accuracy of the reconstruction/registration process in measuring the quasi-static kinematics and the contact parameters was evaluated in a validation study.The quasi-static kinematics data revealed that in OA knees, adduction angles were greater (p<0.01), and the femur was located more medially relative to the tibia (p<0.01). Similarly, the average CP locations on the medial and lateral tibial plateaus of the OA patients were shifted (6.5±0.7 mm; p<0.01) and (9.6±3.1 mm; p<0.01) medially compared to the healthy group. From 0° to 70° flexion, CPs moved 8.1±5.3 mm and 8.9±5.3 mm posteriorly on the medial and lateral plateaus of healthy knees; while in OA joints CPs moved 10.1±8.4 mm and 3.6±2.8 mm posteriorly. The average minimum tibio-femoral bone-to-bone distances of the OA joints were lower in both compartments (p<0.01).The CPs in the OA joints were located more medially and displayed a higher ratio of medial to lateral posterior translations compared to healthy joints.