Refining DNA Barcoding Coupled High Resolution Melting for Discrimination of 12 Closely Related Croton Species

DNA barcoding coupled high resolution melting (Bar-HRM) is an emerging method for species discrimination based on DNA dissociation kinetics. The aim of this work was to evaluate the suitability of different primer sets, derived from selected DNA regions, for Bar-HRM analysis of species in Croton (Euphorbiaceae), one of the largest genera of plants with over 1,200 species. Seven primer pairs were evaluated (matK, rbcL1, rbcL2, rbcL3, rpoC, trnL and ITS1) from four plastid regions, matK, rbcL, rpoC, and trnL, and the nuclear ribosomal marker ITS1. The primer pair derived from the ITS1 region was the single most effective region for the identification of the tested species, whereas the rbcL1 primer pair gave the lowest resolution. It was observed that the ITS1 barcode was the most useful DNA barcoding region overall for species discrimination out of all of the regions and primers assessed. Our Bar-HRM results here also provide further support for the hypothesis that both sequence and base composition affect DNA duplex stability.     

Application of DNA barcoding in Roscoea (Zingiberaceae) and a primary discussion on taxonomic status of Roscoea cautleoides var. pubescens

DNA barcoding is a useful tool to define operational taxonomic units based on standardized DNA regions. In this study, three chloroplast markers (rbcL, trnH-psbA and matK) and one nrDNA marker (ITS) were tested for species identification in Roscoea. The ITS and trnH-psbA regions showed high success rate of PCR amplification and bidirectional sequencing, as well as perfect discriminatory ability. On the contrary, rbcL possessed no genetic variation and matK was relatively difficult in PCR amplification and DNA sequencing. Combination of multiple markers greatly improved identification ability of DNA barcoding. ITS + trnH-psbA could effectively discriminate 90% species based on method of the Neighbor-Joining (NJ) tree. Awful PCR amplification and DNA sequencing of matK restricted its efficiency, although it showed rich genetic variability in Roscoea. Moreover, it might be more appropriate to treat Roscoea cautleoides var. pubescens as an independent species based on molecular data, namely R. pubescens Z. Y. Zhu.     

DNA Barcoding in Endangered Mesoamerican Groups of Plants

Among the applications of DNA barcoding for plant conservation is the identification of illegally traded endangered species from small samples or vegetative specimens. DNA barcoding offers an important tool for the phytosanitary authorities to identify species belonging to groups such as the bamboos and orchids, which command high prices in the horticultural trade. In this study we created a DNA barcode library for 20 endangered Orchidaceae species and 36 species of bamboo (Bambusoideae, Poaceae) distributed in Mexico. We applied several metrics to evaluate the efficiency of the barcodes matK and rbcL and, for bamboos, that of the plastid spacer psbI-K. Our results coincide with those of previous barcoding projects in which alone matK allowed for the identification of the most orchid species. For bamboos, the psbI-K spacer retrieved more polymorphic sites and in combination with matK we were able to identify bamboos to at least the generic level.     

Utility of DNA barcoding to identify rare endemic vascular plant species in Trinidad

The islands of the Caribbean are considered to be a “biodiversity hotspot.” Collectively, a high level of endemism for several plant groups has been reported for this region. Biodiversity conservation should, in part, be informed by taxonomy, population status, and distribution of flora. One taxonomic impediment to species inventory and management is correct identification as conventional morphology‐based assessment is subject to several caveats. DNA barcoding can be a useful tool to quickly and accurately identify species and has the potential to prompt the discovery of new species. In this study, the ability of DNA barcoding to confirm the identities of 14 endangered endemic vascular plant species in Trinidad was assessed using three DNA barcodes (matK, rbcL, and rpoC1). Herbarium identifications were previously made for all species under study. matK, rbcL, and rpoC1 markers were successful in amplifying target regions for seven of the 14 species. rpoC1 sequences required extensive editing and were unusable. rbcL primers resulted in cleanest reads, however, matK appeared to be superior to rbcL based on a number of parameters assessed including level of DNA polymorphism in the sequences, genetic distance, reference library coverage based on BLASTN statistics, direct sequence comparisons within “best match” and “best close match” criteria, and finally, degree of clustering with moderate to strong bootstrap support (>60%) in neighbor‐joining tree‐based comparisons. The performance of both markers seemed to be species‐specific based on the parameters examined. Overall, the Trinidad sequences were accurately identified to the genus level for all endemic plant species successfully amplified and sequenced using both matK and rbcL markers. DNA barcoding can contribute to taxonomic and biodiversity research and will complement efforts to select taxa for various molecular ecology and population genetics studies.     

Is DNA barcoding child's play? Science education and the utility of DNA barcoding for the discrimination of UK tree species

We present the findings of a DNA barcoding study of the UK tree flora, implemented as part of an innovative, research‐based science education programme called ‘Tree School’. The UK tree flora comprises native and introduced species, and is a taxonomically diverse study group for the exploration of the potential and limitations of DNA barcoding. The children participating in the project collected voucher specimens and generated DNA barcode sequences from trees and shrubs found in the grounds and surrounding woodlands of a residential field centre in Dorset, UK. We assessed the potential of rbcL and matK markers for amplification and DNA sequencing success and for species discrimination among the 67 tree and shrub species included in this study. Although we achieved 100% PCR amplification and sequencing success for rbcL and matK, mononucleotide repeats affected sequence quality in matK for some taxonomic groups (e.g. Rosaceae). Species discrimination success ranged from 65% to 71% using tree‐based methods to 86% using BLASTN. The occurrence of known hybrids (diploid and polyploid) and their progenitors on the study site reduced the overall species discrimination success for both loci. This study demonstrates that, even in a floristic context, rbcL and matK alone are insufficient for the discrimination of UK tree species, especially where taxonomically complex groups are present. From a science education perspective, DNA barcoding represents a compelling and accessible platform for the engagement of non‐experts in ongoing research, providing an opportunity for them to contribute authentic scientific data to an international research campaign.     

Testing DNA barcodes in closely related species of Curcuma (Zingiberaceae) from Myanmar and China

The genus Curcuma L. is commonly used as spices, medicines, dyes and ornamentals. Owing to its economic significance and lack of clear‐cut morphological differences between species, this genus is an ideal case for developing DNA barcodes. In this study, four chloroplast DNA regions (matK, rbcL, trnH‐psbA and trnL‐F) and one nuclear region (ITS2) were generated for 44 Curcuma species and five species from closely related genera, represented by 96 samples. PCR amplification success rate, intra‐ and inter‐specific genetic distance variation and the correct identification percentage were taken into account to assess candidate barcode regions. PCR and sequence success rate were high in matK (89.7%), rbcL (100%), trnH‐psbA (100%), trnL‐F (95.7%) and ITS2 (82.6%) regions. The results further showed that four candidate chloroplast barcoding regions (matK, rbcL, trnH‐psbA and trnL‐F) yield no barcode gaps, indicating that the genus Curcuma represents a challenging group for DNA barcoding. The ITS2 region presented large interspecific variation and provided the highest correct identification rates (46.7%) based on BLASTClust method among the five regions. However, the ITS2 only provided 7.9% based on NJ tree method. An increase in discriminatory power needs the development of more variable markers.     

The Internal Transcribed Spacer (ITS) Region and trnhH-psbA Are Suitable Candidate Loci for DNA Barcoding of Tropical Tree Species of India

Background

DNA barcoding as a tool for species identification has been successful in animals and other organisms, including certain groups of plants. The exploration of this new tool for species identification, particularly in tree species, is very scanty from biodiversity-rich countries like India. rbcL and matK are standard barcode loci while ITS, and trnH-psbA are considered as supplementary loci for plants.

Methodology and Principal Findings

Plant barcode loci, namely, rbcL, matK, ITS, trnH-psbA, and the recently proposed ITS2, were tested for their efficacy as barcode loci using 300 accessions of tropical tree species. We tested these loci for PCR, sequencing success, and species discrimination ability using three methods. rbcL was the best locus as far as PCR and sequencing success rate were concerned, but not for the species discrimination ability of tropical tree species. ITS and trnH-psbA were the second best loci in PCR and sequencing success, respectively. The species discrimination ability of ITS ranged from 24.4 percent to 74.3 percent and that of trnH-psbA was 25.6 percent to 67.7 percent, depending upon the data set and the method used. matK provided the least PCR success, followed by ITS2 (59. 0%). Species resolution by ITS2 and rbcL ranged from 9.0 percent to 48.7 percent and 13.2 percent to 43.6 percent, respectively. Further, we observed that the NCBI nucleotide database is poorly represented by the sequences of barcode loci studied here for tree species.

Conclusion

Although a conservative approach of a success rate of 60–70 percent by both ITS and trnH-psbA may not be considered as highly successful but would certainly help in large-scale biodiversity inventorization, particularly for tropical tree species, considering the standard success rate of plant DNA barcode program reported so far. The recommended matK and rbcL primers combination may not work in tropical tree species as barcode markers.     

Study of molecular genetic diversity and evolutionary history of medicinally important endangered genus Chlorophytum using DNA barcodes

This study was aimed to authenticate and present phylogenetic relationship among 19 species of genus Chlorophytum using DNA barcoding. In all, 107 accessions were analyzed with eight plastid (matK, rbcL, trnH-psbA, rpoC1, ycf5, rpoB, atp and psbK-psbI) and six nuclear (ITS) markers. The matK and rbcL were found to be ideal markers for identification and discrimination of Chlorophytum species. Phylogenetic analysis based on matK and rbcL sequences resolved the species in two major clades. All markers, except matK and rbcL, showed ambiguous reads and paralogy in analysis. DGGE analysis showed the presence of pseudogenes and/or co-amplification in these markers, which caused poor sequence quality. Phylogeny and probable evolution of genus Chlorophytum was proposed on the basis of cytological, morphological and genetic information.     

Two New Potential Barcodes to Discriminate Dalbergia Species

DNA barcoding enables precise identification of species from analysis of unique DNA sequence of a target gene. The present study was undertaken to develop barcodes for different species of the genus Dalbergia, an economically important timber plant and is widely distributed in the tropics. Ten Dalbergia species selected from the Western Ghats of India were evaluated using three regions in the plastid genome (matK, rbcL, trnH-psbA), a nuclear transcribed spacer (nrITS) and their combinations, in order to discriminate them at species level. Five criteria: (i) inter and intraspecific distances, (ii) Neighbor Joining (NJ) trees, (iii) Best Match (BM) and Best Close Match (BCM), (iv) character based rank test and (v) Wilcoxon signed rank test were used for species discrimination. Among the evaluated loci, rbcL had the highest success rate for amplification and sequencing (97.6%), followed by matK (97.0%), trnH-psbA (94.7%) and nrITS (80.5%). The inter and intraspecific distances, along with Wilcoxon signed rank test, indicated a higher divergence for nrITS. The BM and BCM approaches revealed the highest rate of correct species identification (100%) with matK, matK+rbcL and matK+trnH-psb loci. These three loci, along with nrITS, were further supported by character based identification method. Considering the overall performance of these loci and their ranking with different approaches, we suggest matK and matK+rbcL as the most suitable barcodes to unambiguously differentiate Dalbergia species. These findings will potentially be helpful in delineating the various species of Dalbergia genus, as well as other related genera.     

Method for quick DNA barcode reference library construction

DNA barcoding has become one of the most important techniques in plant species identification. Successful application of this technology is dependent on the availability of reference database of high species coverage. Unfortunately, there are experimental and data processing challenges to construct such a library within a short time. Here, we present our solutions to these challenges. We sequenced six conventional DNA barcode fragments (ITS1, ITS2, matK1, matK2, rbcL1, and rbcL2) of 380 flowering plants on next‐generation sequencing (NGS) platforms (Illumina Hiseq 2500 and Ion Torrent S5) and the Sanger sequencing platform. After comparing the sequencing depths, read lengths, base qualities, and base accuracies, we conclude that Illumina Hiseq2500 PE250 run is suitable for conventional DNA barcoding. We developed a new “Cotu” method to create consensus sequences from NGS reads for longer output sequences and more reliable bases than the other three methods. Step‐by‐step instructions to our method are provided. By using high‐throughput machines (PCR and NGS), labeling PCR, and the Cotu method, it is possible to significantly reduce the cost and labor investments for DNA barcoding. A regional or even global DNA barcoding reference library with high species coverage is likely to be constructed in a few years.     

Plant core DNA barcode performance at a local scale: identification of the conifers of the state of Hidalgo,Mexico

DNA barcoding constitutes a fundamental tool for species identification, especially for highly diverse geographic regions. Here, we characterize and evaluate the plant core barcoding regions matK and rbcL to identify the 25 conifer species from the state of Hidalgo, Mexico, including 10 species in various threat categories. Sequence quality, linguistic complexity, and the presence of the barcode gap were estimated. Two methods were compared for successful species identification: BRONX (Barcode Recognition Obtained with Nucleotide eXposés) and the least inclusive clade. We generated 77 sequences for matK and 88 for rbcL. The matK region had higher haplotype diversity and nucleotide diversity (Π), including six indels. The analysis of 77 specimens with complete sequences (matK + rbcL) resulted in 21 nonspecies-specific unique haplotypes for the 25 conifer species. Higher sequence quality and linguistic complexity were observed in rbcL than in matK. Every diagnosable species had a barcode gap. Ninety-seven specimens were assigned unambiguously to family and genus, regardless of the marker or method employed. The analysis of matK with BRONX produced the highest species level identification success (44%). Despite the low specimen identification success at the specific level, it will be possible to establish local management, conservation, and monitoring projects for at least half of the threatened species even when specimens do not exhibit diagnostic morphological characters. The low divergence between closely related species may result from the slow rate of molecular evolution of the core barcoding markers or from hybridization or incomplete lineage sorting. Similar identification success is expected for groups with comparable life history traits under similar conditions as this study. A reduction in the geographic area will not necessarily translate into higher identification success, especially for high-diversity regions and centres of diversification.     

Evaluation of the DNA Barcodes in Dendrobium (Orchidaceae) from Mainland Asia

DNA barcoding has been proposed to be one of the most promising tools for accurate and rapid identification of taxa. However, few publications have evaluated the efficiency of DNA barcoding for the large genera of flowering plants. Dendrobium, one of the largest genera of flowering plants, contains many species that are important in horticulture, medicine and biodiversity conservation. Besides, Dendrobium is a notoriously difficult group to identify. DNA barcoding was expected to be a supplementary means for species identification, conservation and future studies in Dendrobium. We assessed the power of 11 candidate barcodes on the basis of 1,698 accessions of 184 Dendrobium species obtained primarily from mainland Asia. Our results indicated that five single barcodes, i.e., ITS, ITS2, matK, rbcL and trnH-psbA, can be easily amplified and sequenced with the currently established primers. Four barcodes, ITS, ITS2, ITS+matK, and ITS2+matK, have distinct barcoding gaps. ITS+matK was the optimal barcode based on all evaluation methods. Furthermore, the efficiency of ITS+matK was verified in four other large genera including Ficus, Lysimachia, Paphiopedilum, and Pedicularis in this study. Therefore, we tentatively recommend the combination of ITS+matK as a core DNA barcode for large flowering plant genera.     

DNA Barcoding of Rhodiola (Crassulaceae): A Case Study on a Group of Recently Diversified Medicinal Plants from the Qinghai-Tibetan Plateau

DNA barcoding, the identification of species using one or a few short standardized DNA sequences, is an important complement to traditional taxonomy. However, there are particular challenges for barcoding plants, especially for species with complex evolutionary histories. We herein evaluated the utility of five candidate sequences — rbcL, matK, trnH-psbA, trnL-F and the internal transcribed spacer (ITS) — for barcoding Rhodiola species, a group of high-altitude plants frequently used as adaptogens, hemostatics and tonics in traditional Tibetan medicine. Rhodiola was suggested to have diversified rapidly recently. The genus is thus a good model for testing DNA barcoding strategies for recently diversified medicinal plants. This study analyzed 189 accessions, representing 47 of the 55 recognized Rhodiola species in the Flora of China treatment. Based on intraspecific and interspecific divergence and degree of monophyly statistics, ITS was the best single-locus barcode, resolving 66% of the Rhodiola species. The core combination rbcL+matK resolved only 40.4% of them. Unsurprisingly, the combined use of all five loci provided the highest discrimination power, resolving 80.9% of the species. However, this is weaker than the discrimination power generally reported in barcoding studies of other plant taxa. The observed complications may be due to the recent diversification, incomplete lineage sorting and reticulate evolution of the genus. These processes are common features of numerous plant groups in the high-altitude regions of the Qinghai-Tibetan Plateau.     

DNA barcoding of flowering plants in Sumatra,Indonesia

The rapid conversion of Southeast Asian lowland rainforests into monocultures calls for the development of rapid methods for species identification to support ecological research and sustainable land‐use management. Here, we investigated the utilization of DNA barcodes for identifying flowering plants from Sumatra, Indonesia. A total of 1,207 matK barcodes (441 species) and 2,376 rbcL barcodes (750 species) were successfully generated. The barcode effectiveness is assessed using four approaches: (a) comparison between morphological and molecular identification results, (b) best‐close match analysis with TaxonDNA, (c) barcoding gap analysis, and (d) formation of monophyletic groups. Results show that rbcL has a much higher level of sequence recoverability than matK (95% and 66%). The comparison between morphological and molecular identifications revealed that matK and rbcL worked best assigning a plant specimen to the genus level. Estimates of identification success using best‐close match analysis showed that >70% of the investigated species were correctly identified when using single barcode. The use of two‐loci barcodes was able to increase the identification success up to 80%. The barcoding gap analysis revealed that neither matK nor rbcL succeeded to create a clear gap between the intraspecific and interspecific divergences. However, these two barcodes were able to discriminate at least 70% of the species from each other. Fifteen genera and twenty‐one species were found to be nonmonophyletic with both markers. The two‐loci barcodes were sufficient to reconstruct evolutionary relationships among the plant taxa in the study area that are congruent with the broadly accepted APG III phylogeny.     

Assessing the potential of candidate DNA barcodes for identifying non‐flowering seed plants

In plants, matK and rbcL have been selected as core barcodes by the Consortium for the Barcode of Life (CBOL) Plant Working Group (PWG), and ITS/ITS2 and psbA‐trnH were suggested as supplementary loci. Yet, research on DNA barcoding of non‐flowering seed plants has been less extensive, and the evaluation of DNA barcodes in this division has been limited thus far. Here, we evaluated seven markers (psbA‐trnH, matK, rbcL, rpoB, rpoC1, ITS and ITS2) from non‐flowering seed plants. The usefulness of each region was assessed using four criteria: the success rate of PCR amplification, the differential intra‐ and inter‐specific divergences, the DNA barcoding gap and the ability to discriminate species. Among the seven loci tested, ITS2 produced the best results in the barcoding of non‐flowering seed plants. In addition, we compared the abilities of the five most‐recommended markers (psbA‐trnH, matK, rbcL, ITS and ITS2) to identify additional species using a large database of gymnosperms from GenBank. ITS2 remained effective for species identification in a wide range of non‐flowering seed plants: for the 1531 samples from 608 species of 80 diverse genera, ITS2 correctly authenticated 66% of them at the species level. In conclusion, the ITS2 region can serve as a useful barcode to discriminate non‐flowering seed plants, and this study will contribute valuable information for the barcoding of plant species.     

A multi‐marker DNA barcoding approach to save time and resources in vegetation surveys

Vegetation surveys have a long tradition in ecological studies, but several limitations in the morphological identification of species have been recognized. The objective of this study was to evaluate the effectiveness of DNA barcoding in plant species identification to save field technicians time and resources. Vegetation surveys were performed in four plots of semi‐dry grassland in the Italian subalpine region of Lombardy. Two identification approaches were employed: a conventional morphological identification and a molecular multi‐marker DNA barcoding method. Results showed that morphological identification of 49 species collected from the study area (five field inspections) required a substantial amount of time to complete relative to the molecular method. The same 49 samples were analysed using the following DNA multi‐marker barcodes: rbcL, matK and trnH‐psbA. rbcL showed 100% amplification success with standard primers, but low interspecific genetic variability. matK demonstrated some amplification problems with standard primers; however, consistent genetic diversity was observed. Finally, the trnH‐psbA spacer region exhibited reliable amplification success and the highest molecular variability. In a comparison with publicly available databases, trnH‐psbA and matK returned the highest proportion of identified samples, whereas rbcL returned several misidentifications. The DNA barcoding approach is a powerful tool in vegetation surveys and may significantly reduce the time and cost spent for species identification. However, to effectively apply DNA barcoding in vegetation surveys, exhaustive local or regional molecular databases must be defined. © 2012 The Linnean Society of London, Botanical Journal of the Linnean Society, 2012, 169 , 518–529.     

Evaluation of Four Commonly Used DNA Barcoding Loci for Chinese Medicinal Plants of the Family Schisandraceae

Many species of Schisandraceae are used in traditional Chinese medicine and are faced with contamination and substitution risks due to inaccurate identification. Here, we investigated the discriminatory power of four commonly used DNA barcoding loci (ITS, trnH-psbA, matK, and rbcL) and corresponding multi-locus combinations for 135 individuals from 33 species of Schisandraceae, using distance-, tree-, similarity-, and character-based methods, at both the family level and the genus level. Our results showed that the two spacer regions (ITS and trnH-psbA) possess higher species-resolving power than the two coding regions (matK and rbcL). The degree of species resolution increased with most of the multi-locus combinations. Furthermore, our results implied that the best DNA barcode for the species discrimination at the family level might not always be the most suitable one at the genus level. Here we propose the combination of ITS+trnH-psbA+matK+rbcL as the most ideal DNA barcode for discriminating the medicinal plants of Schisandra and Kadsura, and the combination of ITS+trnH-psbA as the most suitable barcode for Illicium species. In addition, the closely related species Schisandra rubriflora Rehder & E. H. Wilson and Schisandra grandiflora Hook.f. & Thomson, were paraphyletic with each other on phylogenetic trees, suggesting that they should not be distinct species. Furthermore, the samples of these two species from the southern Hengduan Mountains region formed a distinct cluster that was separated from the samples of other regions, implying the presence of cryptic diversity. The feasibility of DNA barcodes for identification of geographical authenticity was also verified here. The database and paradigm that we provide in this study could be used as reference for the authentication of traditional Chinese medicinal plants utilizing DNA barcoding.     

DNA barcoding herbaceous and woody plant species at a subalpine forest dynamics plot in Southwest China

Although DNA barcoding has been widely used to identify plant species composition in temperate and tropical ecosystems, relatively few studies have used DNA barcodes to document both herbaceous and woody components of forest plot. A total of 201 species (72 woody species and 129 herbaceous species) representing 135 genera distributed across 64 families of seed plants were collected in a 25 ha CForBio subalpine forest dynamics plot. In total, 491 specimens were screened for three DNA regions of the chloroplast genome (rbcL, matK, and trnH‐psbA) as well as the internal transcribed spacers (ITS) of nuclear ribosomal DNA. We quantified species resolution for each barcode separately or in combination using a ML tree‐based method. Amplification and sequencing success were highest for rbcL, followed by trnH‐psbA, which performed better than ITS and matK. The rbcL + ITS barcode had slightly higher species resolution rates (88.60%) compared with rbcL + matK (86.60%) and rbcL + trnH‐psbA (86.01%). The addition of trnH‐psbA or ITS to the rbcL + matK barcode only marginally increased species resolution rates, although in combination the four barcodes had the highest discriminatory power (90.21%). The situations where DNA barcodes did not discriminate among species were typically associated with higher numbers of co‐occurring con‐generic species. In addition, herbaceous species were much better resolved than woody species. Our study represents one of the first applications of DNA barcodes in a subalpine forest dynamics plot and contributes to our understanding of patterns of genetic divergence among woody and herbaceous plant species.     

The Use of DNA Barcoding in Identification and Conservation of Rosewood (Dalbergia spp.)

The genus Dalbergia contains many valuable timber species threatened by illegal logging and deforestation, but knowledge on distributions and threats is often limited and accurate species identification difficult. The aim of this study was to apply DNA barcoding methods to support conservation efforts of Dalbergia species in Indochina. We used the recommended rbcL, matK and ITS barcoding markers on 95 samples covering 31 species of Dalbergia, and tested their discrimination ability with both traditional distance-based as well as different model-based machine learning methods. We specifically tested whether the markers could be used to solve taxonomic confusion concerning the timber species Dalbergia oliveri, and to identify the CITES-listed Dalbergia cochinchinensis. We also applied the barcoding markers to 14 samples of unknown identity. In general, we found that the barcoding markers discriminated among Dalbergia species with high accuracy. We found that ITS yielded the single highest discrimination rate (100%), but due to difficulties in obtaining high-quality sequences from degraded material, the better overall choice for Dalbergia seems to be the standard rbcL+matK barcode, as this yielded discrimination rates close to 90% and amplified well. The distance-based method TaxonDNA showed the highest identification rates overall, although a more complete specimen sampling is needed to conclude on the best analytic method. We found strong support for a monophyletic Dalbergia oliveri and encourage that this name is used consistently in Indochina. The CITES-listed Dalbergia cochinchinensis was successfully identified, and a species-specific assay can be developed from the data generated in this study for the identification of illegally traded timber. We suggest that the use of DNA barcoding is integrated into the work flow during floristic studies and at national herbaria in the region, as this could significantly increase the number of identified specimens and improve knowledge about species distributions.     

Species discrimination in Sisyrinchium (Iridaceae): assessment of DNA barcodes in a taxonomically challenging genus

DNA barcoding aims to develop an efficient tool for species identification based on short and standardized DNA sequences. In this study, the DNA barcode paradigm was tested among the genera of the tribe Sisyrinchieae (Iridoideae). Sisyrinchium, with more than 77% of the species richness in the tribe, is a taxonomically complex genus. A total of 185 samples belonging to 98 species of Sisyrinchium, Olsynium, Orthrosanthus and Solenomelus were tested using matK, trnH‐psbA and internal transcribed spacer (ITS). Candidate DNA barcodes were analysed either as single markers or in combination. Detection of a barcoding gap, similarity‐based methods and tree‐based analyses were used to assess the discrimination efficiency of DNA barcodes. The levels of species identification obtained from plastid barcodes were low and ranged from 17.35% to 20.41% for matK and 5.11% to 7.14% for trnH‐psbA. The ITS provided better results with 30.61–38.78% of species identified. The analyses of the combined data sets did not result in a significant improvement in the discrimination rate. Among the tree‐based methods, the best taxonomic resolution was obtained with Bayesian inference, particularly when the three data sets were combined. The study illustrates the difficulties for DNA barcoding to identify species in evolutionary complex lineages. Plastid markers are not recommended for barcoding Sisyrinchium due to the low discrimination power observed. ITS gave better results and may be used as a starting point for species identification.