Optimization of L-phenylalanine production of Corynebacterium glutamicum under product feedback inhibition by elevated oxygen transfer rate.

Production feedback inhibition both on cell growth and on product formation of phenylalanine fermentation might be alleviated by elevated oxygen supply. Batch fermentations by a high phenylalanine producing strain Corynebacterium glutamicum CCRC 18335 at various initial phenylalanine concentrations (P(0)) ranging from 0 to 20 g/L and different oxygen transfer rate coefficients (K(L)a) ranging from 23 to 76 h(-1) were studied. The fermentation parameters with respect to P(0) were strongly dependent on K(L)a. Cell yield favored higher K(L)a and lower P(0). Product yield with respect to varying phenylalanine concentration was evaluated by the relative oxygen availability (ROA). The optimal ROA for phenylalanine formation was strongly dependent on the product concentration. While P(0) was low, the product inhibition was less significant and the maximum product yield occurred while ROA was at 0.5-0.6. While P(0) was high, the product inhibition was significant and the maximum product yield occurred while ROA was at 0.8-0.9. These results suggest that the product feedback inhibition of phenylalanine fermentation processes can be alleviated by a gradual increase in oxygen supply rate while the increasing product concentration is taken into account. The strategy is demonstrated in a fed-batch culture with elevated oxygen supply. The final phenylalanine concentration was 23.2 g/L, which was 45% better than that of the fed-batch fermentation without elevated oxygen supply. Likewise, the maximum productivity was improved by 42% at 0.37 g/(L x h).     

Enhanced phenylpyruvic acid production with Proteus vulgaris in fed-batch and continuous fermentation

Phenylpyruvic acid is a deaminated form of phenylalanine and is used in various areas such as development of cheese and wine flavors, diagnosis of phenylketonuria, and to decrease excessive nitrogen accumulation in the manure of farm animals. However, reported phenylpyruvic acid fermentation studies in the literature have been usually performed at shake-flask scale with low production. In this study, phenylpyruvic acid production was evaluated in bench-top bioreactors by conducting fed-batch and continuous fermentation for the first time. As a result, maximum phenylpyruvic acid concentrations increased from 1350 mg/L (batch fermentation) to 2958 mg/L utilizing fed-batch fermentation. Furthermore, phenylpyruvic acid productivity was increased from 48 mg/L/hr (batch fermentation) to 104 and 259 mg/L/hr by conducting fed-batch and continuous fermentation, respectively. Overall, this study demonstrated that fed-batch and continuous fermentation significantly improved phenylpyruvic acid production in bench-scale bioreactor production.     

Mixed-feed exponential feeding for fed-batch culture of recombinant methylotrophic yeast

A simple, accurate model capable of predicting cell growth and methanol utilization during the mixed substrate fed-batch fermentation of Mut^S recombinant Pichia pastoris was developed and was used to design an exponential feeding strategy for mixed substrate fed-batch fermentation at a constant specific growth rate. Mixed substrate feeding has been shown to boost productivity in recombinant fed-batch culture of P. pastoris, while fixed growth rate exponential feeding during fed-batch culture is a useful tool in process optimization and control.     

Control of feed rate to a fed-batch culture using a heat-flux sensor

Summary Substrate inhibition in batch fermentations can be avoided by employing the fed-batch technique in which substrate concentration is kept at low levels by a programmed feed rate. This research demonstrates the use of a heat-flux sensor to control substrate addition by continuously monitoring evolving heat which is proportional to fermentation rate. Batch fermentation with 240 g/L glucose in the medium was compared with a fed-batch starting with 20 g/L glucose in the medium and increased, with 500 g/L glucose, to a final equivalent glucose concentration of 240 g/L. The batch fermentation produced 106 g/L ethanol in 39 hr at 2.72 g/L/h, while the best fed-batch produced 114 g/L ethanol in 34 hr at 3.35 g/L/h with the same nutrients.The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

Microbial production of 2,3-butanediol from Jerusalem artichoke tubers by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

2,3-Butanediol is one of the promising bulk chemicals with wide applications. Its fermentative production has attracted great interest due to the high end concentration. However, large-scale production of 2,3-butanediol requires low-cost substrate and efficient fermentation process. In the present study, 2,3-butanediol production by Klebsiella pneumoniae from Jerusalem artichoke tubers was successfully performed, and various technologies, including separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF), were investigated. The concentration of target products reached 81.59 and 91.63 g/l, respectively after 40 h in batch and fed-batch SSF processes. Comparing with fed-batch SHF, the fed-batch SSF provided 30.3% higher concentration and 83.2% higher productivity of target products. The results showed that Jerusalem artichoke tuber is a favorable substrate for 2,3-butanediol production, and the application of fed-batch SSF for its conversion can result in a more cost-effective process.     

Fed-batch sorbose fermentation using pulse and multiple feeding strategies for productivity improvement

Microbial oxidation of D-sorbitol tol-sorbose byAcetobacter suboxydans is of commercial importance since it is the only biochemical process in vitamin C synthesis. The main bottleneck in the batch oxidation of sorbitol to sorbose is that the process is severely inhibited by sorbitol. Suitable fed-batch fermentation designs can eliminate the inherent substrate inhibition and improve sorbose productivity. Fed-batch sorbose fermentations were conducted by using two nutrient feeding strategies. For fed-batch fermentation with pulse feeding highly concentrated sorbitol (600 g/L) along with other nutrients were fed intermittently in four pulses of 0.5 liter in response to the increased DO signal. The fed-batch fermentation was over in 24 h with a sorbose productivity of 13.40 g/L/h and a final sorbose concentration of 320.48 g/L. On the other hand, in fed-batch fermentation with multiple feeds, two pulse feeds of 0.5 liter nutrient medium containing 600 g/L sorbitol was followed by the addition of 1.5 liter nutrient medium containing 600 g/L sorbitol at a constant feed rate of 0.36 L/h till the full working capacity of the reactor. The fermentation was completed in 24 h with an enhanced sorbose productivity of 15.09 g/L/h and a sorbose concentration of 332.60 g/L. The sorbose concentration and productivity obtained by multiple feeding of nutrients was found to be higher than that obtained by pulse feeding and was therefore a better strategy for fed-batch sorbose fermentation.     

Effects of fed-batch fermentation and pH profiles on nisin production in suspended-cell and biofilm reactors

A biofilm reactor not only shortens the lag phase of nisin production, but also enhances nisin production when combined with an appropriate pH profile. Due to the substrate inhibition that takes place at high levels of carbon source, fed-batch fermentation was proposed as a better alternative for nisin production. In this study, the combined effects of fed-batch fermentation and various pH profiles on nisin production in a biofilm reactor were evaluated. The tested pH profiles include 1) a constant pH profile at 6.8 (profile 1), 2) a constant pH profile with an autoacidification after 4 h (profile 2), and 3) a step-wise pH profile with pH adjustment every 2 h (profile 3). When profile 1 was applied, fed-batch fermentation enhanced nisin production for both suspended-cell (4,188 IU ml⁻¹) and biofilm (4,314 IU ml⁻¹) reactors, yielded 1.8- and 2.3-fold higher nisin titer than their respective batch fermentation. On the other hand, pH profiles that include periods of autoacidification (profiles 2 and 3) resulted in a significantly lower nisin production in fed-batch fermentation (2,494 and 1,861 IU ml⁻¹ for biofilm reactor using profile 2 and 3, respectively) due to toxicity of excess lactic acid produced during the fermentation. Overall, this study suggested that fed-batch fermentation can be successfully used to enhance nisin production for both suspended-cell and biofilm reactors.     

Feedback stabilization of fed-batch bioreactors: non-monotonic growth kinetics

This paper deals with the design of a feedback controller for fed-batch microbial conversion processes that forces the substrate concentration C(S) to a desired setpoint, starting from an arbitrary (initial) substrate concentration when non-monotonic growth kinetics apply. This problem is representative for a lot of industrial fermentation processes, with the baker's yeast fermentation as a well-known example. It is assumed that the specific growth rate mu is function of the substrate concentration only. A first approach exploits the availability of on-line measurements of both the substrate and biomass concentration. A second approach is merely based on on-line measurements of the biomass concentration, which provide an estimate for the specific growth rate. After a reformulation of the substrate concentration setpoint into a specific growth rate setpoint, it is demonstrated that the fed-batch process can still be stabilized around any desired operating point along the non-monotonic kinetics.     

Pullulan from peat hydrolyzate fermentation kinetics

The Luedeking-Piret equation was used to fit the kinetic data of pullulan fermentations from peat hydrolyzate substrate. In batch mode, the kinetic parameters m, n, alpha, and beta varied as a function of fermentation conditions: aeration rate, agitation speed, and temperature. In constant-feed fed-batch mode, the parameters Varied according to the feed rates. In peat hydrolyzate medium, the polysaccharide synthesis was strongly growth associated in batch and continuous fermentations but entirely growth associated in fedbatch fermentations. The fed-batch mode of fermentation with an appropriate feed rate is more advantageous with respect to batch and continuous fermentations. Therefore, if the fermentation is started batchwise and then followed by fed-batch mode at a constant feed rate, the overall polysaccharide productivity (g pullulan/L h) is significantly higher than those obtained with batch or continuous fermentations using the same total medium volume.     

Effect of cycle time on fungal morphology, broth rheology, and recombinant enzyme productivity during pulsed addition of limiting carbon source

For many years, high broth viscosity has remained a key challenge in large-scale filamentous fungal fermentations. In previous studies, we showed that broth viscosity could be reduced by pulsed addition of limiting carbon during fed-batch fermentation. The objective in this study was to determine how changing the frequency of pulsed substrate addition affects fungal morphology, broth rheology, and recombinant enzyme productivity. To accomplish this, a series of duplicate fed-batch fermentations were performed in 20-L fermentors with a recombinant glucoamylase producing strain of Aspergillus oryzae. The total cycle time for substrate pulsing was varied over a wide range (30-2,700 s), with substrate added only during the first 30% of each cycle. As a control, a fermentation was conducted with continuous substrate feeding, and in all fermentations the same total amount of substrate was added. Results show that the total biomass concentration remained relatively unaltered, while a substantial decrease in the mean projected area of fungal elements (i.e., average size) was observed with increasing cycle time. This led to reduced broth viscosity and increased oxygen uptake rate. However, high values of cycle time (i.e., 900-2,700 s) showed a significant increase in fungal conidia formation and significantly reduced recombinant enzyme productivity, suggesting that the fungi channeled substrate to storage compounds rather than to recombinant protein. In addition to explaining the effect of cycle time on fermentation performance, these results may aid in explaining the discrepancies observed on scale-up to larger fermentors.     

Optimization of human serum albumin production in methylotrophic yeast Pichia pastoris by repeated fed-batch fermentation

An optimization method for repeated fed-batch fermentation was established with the aim of improving the recombinant human serum albumin (rHSA) production in Pichia pastoris. A simulation model for fed-batch fermentation was formulated and the optimal methanol-feeding policy calculated by dynamic programming method using five different methanol-feeding periods. The necessary state variables were collected from the calculated results and used for further optimization of repeated fed-batch fermentation. The optimal operation policy was investigated using the pre-collected state variables by estimating the overall profit per total methanol-feeding time. The calculated results indicated that the initial cell mass from the 2nd fed-batch fermentation on should be set at 35 or 40 g and methanol-feeding time at 264 h. In repeated fed-batch fermentation using the optimal operation policy, actual culture volume was in good agreement with the values simulated by model equations, but some discrepancy was observed in rHSA production. Minimum experiments were therefore carried out to re-evaluate rHSA production levels, which were then applied in re-calculations to determine the optimal operation policy. The optimal policy for repeated fed-batch fermentation established in the present study (i.e., 4-times-repeated fed-batch fermentation) achieved a 47% increase in annual rHSA production. Optimization of the culture period also brought about a 28% increase in annual rHSA production even in simple (not repeated) fed-batch fermentation.     

微生物法生产二羟基丙酮的研究进展

以下综述了微生物发酵法制备二羟基丙酮的研究进展。利用微生物发酵法生产二羟基丙酮比化学合成法具有更大的优势,氧化葡萄糖酸杆菌是二羟基丙酮工业发酵生产中最有应用价值的菌株。发酵过程中底物、产物、氧气、菌体量等各种因素都会对二羟基丙酮产量产生影响,在各种发酵方式中反复流加工艺和固定化发酵工艺最有前途。重组菌株的构建和发酵工艺的优化是将来微生物发酵生产二羟基丙酮的发展方向。     

Pullulan production by a non-pigmented strain of Aureobasidium pullulans using batch and fed-batch culture

The production of pigment-free pullulan by Aureobasidium pullulans in batch and fed-batch culture was investigated. Batch culture proved to be a better fermentation system for the production of pullulan than the fed-batch culture system. A maximum polysaccharide concentration (31.3 g l⁻¹), polysaccharide productivity (4.5 g l⁻¹ per day), and sugar utilization (100%) were obtained in batch culture. In fed-batch culture, feed medium composition influenced the kinetics of fermentation. For fed-batch culture, the highest values of pullulan concentration (24.5 g l⁻¹) and pullulan productivity (3.5 g l⁻¹ per day) were obtained in culture grown with feeding substrate containing 50 g l⁻¹ sucrose and all nutrients. The molecular size of pullulan showed a decline as fermentation progressed for both fermentation systems. At the end of fermentation, the polysaccharide isolated from the fed-batch culture had a slightly higher molecular weight than that of batch culture. Structural characterization of pullulan samples (methylation and enzymic hydrolysis with pullulanase) revealed the presence of mainly α-(1→4) (∼66%) and α-(1→6) (∼31%) glucosidic linkages; however, a small amount (<3%) of triply linked (1,3,4-, 1,3,6-, 1,2,4- and 1,4,6-Glc p) residues were detected. The molecular homogeneity of the alcohol-precipitated polysaccharides from the fermentation broths as well as the structural features of pullulan were confirmed by ¹³C-NMR and pullulanase treatments followed by gel filtration chromatography of the debranched digests.     

D-核糖发酵过程中底物抑制及补料的研究

研究了初始葡萄糖浓度对D -核糖发酵的影响 ,证实了较高的葡萄糖浓度对D -核糖发酵的抑制作用 ,并确定了较为适宜的初始葡萄糖浓度为 1 0 0g·L-1 或 1 5 0g·L-1 。前者条件下D -核糖的转化率和生产强度均达最大 ,分别为 32 8g·kg-1 和0 .6 8g·L-1 ·h-1 ;后者条件下D -核糖的产量达最大值 39.4 8g·L-1 。针对底物抑制现象 ,研究了补料工艺对D -核糖发酵的影响 ,确定发酵 2 4h后补加 5 0g·L-1 的葡萄糖为较优的补料工艺 ,在此工艺条件下最终D -核糖产量相对于对照组提高了 4 8.3%。     

Fed-batch production of citric acid by Candida lipolytica grown on n-paraffins

This study reports on the effects of fermentor agitation and fed-batch mode of operation on citric acid production from Candida lipolytica using n-paraffin as the carbon source. An optimum range of agitation speeds in the 800-1000 rpm range corresponding to Reynolds numbers of 50000-63000 (based on initial batch conditions) seemed to give the best balance between substrate utilization for biomass growth and citric acid production. Application of multiple fed-batch feedings can be used to extend the batch fermentation and increase final citric acid concentrations and product yield. The three-cycle fed-batch system increased overall citric acid yields to 0.8-1.0 g citricacid/g n-paraffin, approximately a 100% improvement in product yield from those observed in the single cycle fed-batch system and a 200% improvement over normal batch operation. The three-cycle fed-batch mode of operation also increased the final citric acid concentration to 42 g/l from about 12 and 6g/l for single fed-batch cycle and normal batch modes of operation, respectively. Increased citric acid concentrations in three-cycle fed-batch mode was achieved at longer fermentation times.     

Fermentation kinetics of Zymomonas mobilis near zero growth rate

The fermentation kinetics Zymomonas mobilis were studied near zero growth rate in fed-batch cultures and continuous cultures with complete cell recycle. The results show the ethanol enhances that specific substrate conversion rate under these conditions. The maximum achievable ethanol concentration in continuous cultures with cell recycle (66 g/L) was significantly lower than in fed-batch cultures (100 g/L). The results indicate that growth-rate-independent metabolism is not instantaneous and can lag behind steadily increasing ethanol concentrations in fed-batch fermentations. A model is proposed to account for this slow adaptation.     

Fed-batch culture of yeast Saccharomyces cerevisiae with a DO-stat method by a fuzzy controller

In this research a fuzzy controller was built to perform fed-batch cultures of Saccharomyces cerevisiae with a DO-stat method. The basic principle of fed-batch culture employing the DO-stat method is that a rapid increase of dissolved oxygen concentration due to a lack of substrate (the DO signal) is used as an indicator for substrate feeding. The proposed fuzzy controller can diagnose the state of fermentation and determine a proper feed rate of substrate for the culture of high density and high yield. The results indicate that cell concentration reached to 110?g/l and residual sugar kept below the level of 0.05?g/l.     

Modeling enzyme production with Aspergillus oryzae in pilot scale vessels with different agitation, aeration, and agitator types

The purpose of this article is to demonstrate how a model can be constructed such that the progress of a submerged fed-batch fermentation of a filamentous fungus can be predicted with acceptable accuracy. The studied process was enzyme production with Aspergillus oryzae in 550 L pilot plant stirred tank reactors. Different conditions of agitation and aeration were employed as well as two different impeller geometries. The limiting factor for the productivity was oxygen supply to the fermentation broth, and the carbon substrate feed flow rate was controlled by the dissolved oxygen tension. In order to predict the available oxygen transfer in the system, the stoichiometry of the reaction equation including maintenance substrate consumption was first determined. Mainly based on the biomass concentration a viscosity prediction model was constructed, because rising viscosity of the fermentation broth due to hyphal growth of the fungus leads to significant lower mass transfer towards the end of the fermentation process. Each compartment of the model was shown to predict the experimental results well. The overall model can be used to predict key process parameters at varying fermentation conditions.     

分批补料对木糖发酵生产乙醇的影响

以树干毕赤酵母为发酵菌种,纯木糖为发酵底物,通过分批补料来提高糖利用率以及乙醇得率。结果表明,在24h内,最佳初始木糖浓度为80g/L,在28h的发酵周期中,可以将木糖浓度提高至90g/L,在32h发酵周期内可以将木糖浓度提高至100g/L。通过分批补料,乙醇浓度得到明显提高。当总糖浓度分别为80g/L、90g/L时,24h发酵周期内,分批补料次数以1次为宜,乙醇浓度分别达30.95g/L、32.60g/L,相比于不补料即一次性投料,乙醇浓度分别提高了9.36%、9.18%。总糖浓度100g/L,28h发酵周期内,补料2次效果最佳,乙醇浓度达37.49g/L,比一次性投料下提高了10.36%,较一次性投料达到相同发酵效果缩短了4h。     

Demonstration of the Crabtree effect in Phaffia rhodozyma during continuous and fed-batch cultivation

By monitoring cell yield and fermentation products during fed-batch and continuous growth, Pfaffia rhodozyma was shown to exhibit the Crabtree effect. In fed-batch culture at feed concentrations of 27 and 55 g glucose/l there was good agreement between the observed biomass formation and that predicted by a mass balance model. At 125 g glucose/l in the feed, biomass formation was less than predicted and fermentation products such as ethanol and acetic acid accumulated in the culture medium. In continuous culture with a feed concentration of 10 g glucose/l, the Crabtree effect became apparent at a dilution rate of 0.1 h -1 . Aerobic fermentation did not occur provided the sugar substrate was maintained at a concentration of less than 0.5 g/l. Although the cell yield coefficient was reduced from 0.5 g/g to 0.16 g/g during aerobic fermentation, the carotenoid content of the cells was unaffected.