The variation of catalytic efficiency of Bacillus cereus metallo-beta-lactamase with different active site metal ions

The kinetics and mechanism of hydrolysis of the native zinc and metal substituted Bacillus cereus (BcII) metallo-beta-lactamase have been investigated. The pH and metal ion dependence of k(cat) and k(cat)/K(m), determined under steady-state conditions, for the cobalt substituted BcII catalyzed hydrolysis of cefoxitin, cephaloridine, and cephalexin indicate that an enzyme residue of apparent pK(a) 6.3 +/- 0.1 is required in its deprotonated form for metal ion binding and catalysis. The k(cat)/K(m) for cefoxitin and cephalexin with cadmium substituted BcII is dependent on two ionizing groups on the enzyme: one of pK(a1) = 8.7 +/- 0.1 required in its deprotonated form and the other of pK(a2) = 9.3 +/- 0.1 required in its protonated form for activity. The pH dependence of the competitive inhibition constant, K(i), for CdBcII with l-captopril indicates that pK(a1) = 8.7 +/- 0.1 corresponds to the cadmium-bound water. For the manganese substituted BcII, the pH dependence of k(cat)/K(m) for benzylpenicillin, cephalexin, and cefoxitin similarly indicated the importance of two catalytic groups: one of pK(a1) = 8.5 +/- 0.1 which needs to be deprotonated and the other of pK(a2) = 9.4 +/- 0.1 which needs to be protonated for catalysis; the pK(a1) was assigned to the manganese-bound water. The rate was metal ion concentration dependent at the highest manganese concentrations used (10(-)(3) M). The metal substituted species have similar or higher catalytic activities compared with the zinc enzyme, albeit at pHs above 7. Interestingly, with cefoxitin, a very poor substrate for ZnBcII, both k(cat) and k(cat)/K(m) increase with increasing pK(a) of the metal-bound water, in the order Zn < Co < Mn < Cd. A higher pK(a) for the metal-bound water for cadmium and manganese BCII leads to more reactive enzymes than the native zinc BcII, suggesting that the role of the metal ion is predominantly to provide the nucleophilic hydroxide, rather than to act as a Lewis acid to polarize the carbonyl group and stabilize the oxyanion tetrahedral intermediate.     

A direct continuous spectrophotometric assay for transglutaminase activity

Herein we report the development of a direct and continuous spectrophotometric method for determining transglutaminase (TGase) activity by using N,N-dimethyl-1,4-phenylenediamine (DMPDA) as a gamma-glutamyl acceptor substrate and carbobenzyloxy-l-glutamylglycine (Z-Gln-Gly) as a typical peptide gamma-glutamyl donor substrate. The transamidation activity of TGase can thus be followed by monitoring the increase of absorbance of the resulting anilide product at 278 nm. The extinction coefficient of the authentic, independently synthesized anilide was determined to be epsilon = 8940 +/- 55 M(-1) cm(-1). Using this assay, we determined the apparent K(M) of DMPDA to be 0.25 mM, which compares favorably to the apparent K(M) values determined for other acceptor substrates under conditions where Z-Gln-Gly is also used as the donor substrate, such as N-acetyl-l-lysine methyl ester (9.6 mM) and methylamine (13.1 mM). Finally, the sensitivity of this assay technique was established through the measurement of irreversible inhibition constants for iodoacetamide, determined to be K(I) = 75 +/- 11 nM and k(inact) = (120 +/- 1) x 10(5) M(-1) min(-1).     

Catalytic mechanism of hamster arylamine N-acetyltransferase 2

Arylamine N-acetyltransferases (NATs) catalyze an acetyl group transfer from AcCoA to primary arylamines, hydrazines, and hydrazides and play a very important role in the metabolism and bioactivation of drugs, carcinogens, and other xenobiotics. The reaction follows a ping-pong bi-bi mechanism. Structure analysis of bacterial NATs revealed a Cys-His-Asp catalytic triad that is strictly conserved in all known NATs. Previously, we have demonstrated by kinetic and isotope effect studies that acetylation of the hamster NAT2 is dependent on a thiolate-imidazolium ion pair (Cys-S(-)-His-ImH(+)) and not a general acid-base catalysis. In addition, we established that, after formation of the acetylated enzyme intermediate, the active-site imidazole, His-107, is likely deprotonated at physiological pH. In this paper, we report steady-state kinetic studies of NAT2 with two acetyl donors, acetyl coenzyme A (AcCoA) and p-nitrophenyl acetate (PNPA), and four arylamine substrates. The pH dependence of k(cat)/K(AcCoA) exhibited two inflection points at 5.32 +/- 0.13 and 8.48 +/- 0.24, respectively. The pK(a) at 5.32 is virtually identical with the previously reported pK(a) of 5.2 for enzyme acetylation, reaffirming that the first half of the reaction is catalyzed by a thiolate-imidazolium ion pair in the active site. The inflection point at 8.48 indicates that a pH-sensitive group on NAT2 is involved in AcCoA binding. A Br?nsted plot constructed by the correlation of log k(4) and log k(H)2(O) with the pK(a) for each arylamine substrate and water displays a linear free-energy relationship in the pK(a) range from -1.7 (H(2)O) to 4.67 (PABA), with a slope of beta(nuc) = 0.80 +/- 0.1. However, a further increase of the pK(a) from 4.67 (PABA) to 5.32 (anisidine) resulted in a 2.5-fold decrease in the k(4) value. Analysis of the pH-k(cat)/K(PABA) profile revealed a pK(a) of 5.52 +/- 0.14 and a solvent kinetic isotope effect (SKIE) of 2.01 +/- 0.04 on k(cat)/K(PABA). Normal solvent isotope effects of 4.8 +/- 0.1, 3.1 +/- 0.1, and 3.2 +/- 0.1 on the k(cat)/K(b) for anisidine, pABglu, and PNA, respectively, were also determined. These observations are consistent with a deacetylation mechanism dominated by nucleophilic attack of the thiol ester for arylamines with pK(a) values or=5.5. The general base is likely His-107 because the His-107 to Gln and Asn mutants were found to be devoid of catalytic activity. In contrast, an increase in pH-dependent hydrolysis of the acetylated enzyme was not observed over a pH range of 5.2-7.5. On the basis of these observations, a catalytic mechanism for the acetylation of arylamines by NAT2 is proposed.     

Mechanistic studies of the yeast polyamine oxidase Fms1: kinetic mechanism, substrate specificity, and pH dependence

The flavoprotein oxidase Fms1 from Saccharomyces cerevisiae catalyzes the oxidation of spermine and N(1)-acetylspermine to yield spermidine and 3-aminopropanal or N-acetyl-3-aminopropanal. The kinetic mechanism of the enzyme has been determined with both substrates. The initial velocity patterns are ping-pong, consistent with reduction being kinetically irreversible. Reduction of Fms1 by either substrate is biphasic. The rate constant for the rapid phase varies with the substrate concentration, with limiting rates for reduction of the enzyme of 126 and 1410 s(-1) and apparent K(d) values of 24.3 and 484 μM for spermine and N(1)-acetylspermine, respectively. The rapid phase is followed by a concentration-independent phase that is slower than turnover. The reaction of the reduced enzyme with oxygen is monophasic, with a rate constant of 402 mM(-1) s(-1) with spermine at 25 °C and 204 mM(-1) s(-1) with N(1)-acetylspermine at 4 °C and pH 9.0. This step is followed by rate-limiting product dissociation. The k(cat)/K(amine)-pH profiles are bell-shaped, with an average pK(a) value of 9.3 with spermine and pK(a) values of 8.3 and 9.6 with N(1)-acetylspermine. Both profiles are consistent with the active forms of substrates having two charged nitrogens. The pH profiles for the rate constant for flavin reduction show pK(a) values of 8.3 and 7.2 for spermine and N(1)-acetylspermine, respectively, for groups that must be unprotonated; these pK(a) values are assigned to the substrate N4. The k(cat)/K(O(2))-pH profiles show pK(a) values of 7.5 for spermine and 6.8 for N(1)-acetylspermine. With both substrates, the k(cat) value decreases when a single residue is protonated.     

Unraveling the catalytic mechanism of nitrile hydratases

To elucidate a detailed catalytic mechanism for nitrile hydratases (NHases), the pH and temperature dependence of the kinetic constants k(cat) and K(m) for the cobalt-type NHase from Pseudonocardia thermophila JCM 3095 (PtNHase) were examined. PtNHase was found to exhibit a bell-shaped curve for plots of relative activity versus pH at pH 3.2-11 and was found to display maximal activity between pH 7.2 and 7.8. Fits of these data provided pK(E)(S1) and pK(E)(S2) values of 5.9 +/- 0.1 and 9.2 +/- 0.1 (k(cat)' = 130 +/- 1 s(-1)), respectively, and pK(E)(1) and pK(E)(2) values of 5.8 +/- 0.1 and 9.1 +/- 0.1 (k(cat)'/K(m)' = (6.5 +/- 0.1) x 10(3) s(-1) mm(-1)), respectively. Proton inventory studies indicated that two protons are transferred in the rate-limiting step of the reaction at pH 7.6. Because PtNHase is stable at 60 degrees C, an Arrhenius plot was constructed by plotting ln(k(cat)) versus 1/T, providing E(a) = 23.0 +/- 1.2 kJ/mol. The thermal stability of PtNHase also allowed DeltaH(0) ionization values to be determined, thus helping to identify the ionizing groups exhibiting the pK(E)(S1) and pK(E)(S2) values. Based on DeltaH(0)(ion) data, pK(E)(S1) is assigned to betaTyr(68), whereas pK(E)(S2) is assigned to betaArg(52), betaArg(157), or alphaSer(112) (NHases are alpha(2)beta(2)-heterotetramers). A combination of these data with those previously reported for NHases and synthetic model complexes, along with sequence comparisons of both iron- and cobalt-type NHases, allowed a novel catalytic mechanism for NHases to be proposed.     

Kinetic studies of rat kidney gamma-glutamyltranspeptidase deacylation reveal a general base-catalyzed mechanism

The enzyme gamma-glutamyltranspeptidase (GGT) is critical to cellular detoxification and leukotriene biosynthesis processes, as well as amino acid transport in kidneys. GGT has also been implicated in many important physiological disorders, including Parkinson's disease and inhibition of apoptosis. It binds glutathione as a donor substrate and initially forms a gamma-glutamyl-enzyme complex that can then react with a water molecule or an acceptor substrate (usually an amino acid or a dipeptide) to form glutamate or a product containing a new gamma-glutamyl-isopeptide bond, respectively, thus regenerating the free enzyme. Despite its important role in human physiology, the mechanisms of the reactions catalyzed by GGT are not well-known, particularly with respect to the deacylation step. We have synthesized a series of methionine amide derivatives whose alpha-ammonium groups have different pK(a) values. By using these compounds as acceptor substrates for GGT, we have constructed a Br?nsted plot and obtained a good correlation for log(k(norm)(cat,b)/K(b)) versus pK(a)(NH+) with a slope beta(nuc) of 0.84, consistent with a rate-limiting nucleophilic attack of the substrate amine on the acyl-enzyme intermediate. Isotope effect studies have shown that there is a proton in flight at the transition state, consistent with concerted deprotonation of the nucleophilic amine effected by an unidentified general base. A bell-shaped pH-rate profile has also been obtained for the deacylation step, reflecting the pK(a) values of the acceptor substrate (and/or that of a general base residue) and of a putative general acid that may be necessary for reprotonation of the active site nucleophile upon regeneration of the free enzyme. These data allow us to propose for the first time a detailed mechanism for this important step of the GGT-mediated reaction and to speculate about the origin of its acceptor substrate specificity.     

Solvent isotope effects on alpha-glucosidase

The solvent kinetic isotope effects (SKIE) on the yeast alpha-glucosidase-catalyzed hydrolysis of p-nitrophenyl and methyl-d-glucopyranoside were measured at 25 degrees C. With p-nitrophenyl-D-glucopyranoside (pNPG), the dependence of k(cat)/K(m) on pH (pD) revealed an unusually large (for glycohydrolases) solvent isotope effect on the pL-independent second-order rate constant, (DOD)(k(cat)/K(m)), of 1.9 (+/-0.3). The two pK(a)s characterizing the pH profile were increased in D(2)O. The shift in pK(a2) of 0.6 units is typical of acids of comparable acidity (pK(a)=6.5), but the increase in pK(a1) (=5.7) of 0.1 unit in going from H(2)O to D(2)O is unusually small. The initial velocities show substrate inhibition (K(is)/K(m) approximately 200) with a small solvent isotope effect on the inhibition constant [(DOD)K(is)=1.1 (+/-0.2)]. The solvent equilibrium isotope effects on the K(is) for the competitive inhibitors D-glucose and alpha-methyl D-glucoside are somewhat higher [(DOD)K(i)=1.5 (+/-0.1)]. Methyl glucoside is much less reactive than pNPG, with k(cat) 230 times lower and k(cat)/K(m) 5 x 10(4) times lower. The solvent isotope effect on k(cat) for this substrate [=1.11 (+/-0. 02)] is lower than that for pNPG [=1.67 (+/-0.07)], consistent with more extensive proton transfer in the transition state for the deglucosylation step than for the glucosylation step.     

Acid-base catalysis by UDP-galactose 4-epimerase: correlations of kinetically measured acid dissociation constants with thermodynamic values for tyrosine 149

The steady-state kinetic parameters for epimerization of UDP-galactose by UDP-galactose 4-epimerase from Escherichia coli (GalE), Y149F-GalE, and S124A-GalE have been measured as a function of pH. The deuterium kinetic isotope effects for epimerization of UDP-galactose-C-d(7) by these enzymes have also been measured. The results show that the activity of wild-type GalE is pH-independent in the pH range of 5.5-9.3, and there is no significant deuterium kinetic isotope effect in the reaction of UDP-galactose-C-d(7). It is concluded that the rate-limiting step for epimerization by wild-type GalE is not hydride transfer and must be either a diffusional process or a conformational change. Epimerization of UDP-galactose-C-d(7) by Y149F-GalE proceeds with a pH-dependent deuterium kinetic isotope effect on k(cat) of 2.2 +/- 0.4 at pH 6.2 and 1.1 +/- 0.5 at pH 8.3. Moreover, the plot of log k(cat)/K(m) breaks downward on the acid side with a fitted value of 7.1 for the pK(a). It is concluded that the break in the pH-rate profile arises from a change in the rate-limiting step from hydride transfer at low pH to a conformational change at high pH. Epimerization of UDP-galactose-C-d(7) by S124A-GalE proceeds with a pH-independent deuterium kinetic isotope effect on k(cat) of 2.0 +/- 0.2 between pH 6 and 9. Both plots of log k(cat) and log k(cat)/K(m) display pH dependence. The plot of log k(cat) versus pH breaks downward with a pK(a) of 6.35 +/- 0.10. The plot of log k(cat)/K(m) versus pH is bell-shaped, with fitted pK(a) values of 6.76 +/- 0.09 and 9.32 +/- 0.21. It is concluded that hydride transfer is rate-limiting, and the pK(a) of 6.7 for free S124A-GalE is assigned to Tyr 149, which displays the same value of pK(a) when measured spectrophotometrically in this variant. Acid-base catalysis by Y149F-GalE is attributed to Ser 124, which is postulated to rescue catalysis of proton transfer in the absence of Tyr 149. The kinetic pK(a) of 7.1 for free Y149F-GalE is lower than that expected for Ser 124, as proven by the pH-dependent kinetic isotope effect. Epimerization by the doubly mutated Y149F/S124A-GalE proceeds at a k(cat) that is lower by a factor of 10(7) than that of wild-type GalE. This low rate is attributed to the synergistic actions of Tyr 149 and Ser 124 in wild-type GalE and to the absence of any internal catalysis of hydride transfer in the doubly mutated enzyme.     

Do enzymes change the nature of transition states? Mapping the transition state for general acid-base catalysis of a serine protease

The properties of the transition state for serine protease-catalyzed hydrolysis of an amide bond were determined for a series of subtilisin variants from Bacillus lentus. There is no significant change in the structure of the enzyme upon introduction of charged mutations S156E/S166D, suggesting that changes in catalytic activity reflect global properties of the enzyme. The effect of charged mutations on the pK(a) of the active site histidine-64 N(epsilon)(2)-H was correlated with changes in the second-order rate constant k(cat)/K(m) for hydrolysis of tetrapeptide anilides at low ionic strength with a Br?nsted slope alpha = 1.1. The solvent isotope effect (D)2(O)(k(cat)/K(m))(1) = 1.4 +/- 0.2. These results are consistent with a rate-limiting breakdown of the tetrahedral intermediate in the acylation step with hydrogen bond stabilization of the departing amine leaving group. There is an increase in the ratio of hydrolysis of succinyl-Ala-Ala-Pro-Phe-anilides for p-nitroaniline versus aniline leaving groups with variants with more basic active site histidines that can be described by the interaction coefficient p(xy) = delta beta(lg)/delta pK(a) (H64) = 0.15. This is attributed to increased hydrogen bonding of the active site imidazolium N-H to the more basic amine leaving group as well as electrostatic destabilization of the transition state. A qualitative characterization of the transition state is presented in terms of a reaction coordinate diagram that is defined by the structure-reactivity parameters.     

Hydrolysis of the 5'-p-nitrophenyl ester of TMP by the proofreading exonuclease (epsilon) subunit of Escherichia coli DNA polymerase III

The core of DNA polymerase III, the replicative polymerase in Escherichia coli, consists of three subunits (alpha, epsilon, and theta). The epsilon subunit is the 3'-5' proofreading exonuclease that associates with the polymerase (alpha) through its C-terminal region and theta through a 185-residue N-terminal domain (epsilon 186). A spectrophotometric assay for measurement of epsilon activity is described. Proteins epsilon and epsilon 186 and the epsilon 186.theta complex catalyzed the hydrolysis of the 5'-p-nitrophenyl ester of TMP (pNP-TMP) with similar values of k(cat) and K(M), confirming that the N-terminal domain of epsilon bears the exonuclease active site, and showing that association with theta has little direct effect on the chemistry occurring at the active site of epsilon. On the other hand, formation of the complex with theta stabilized epsilon 186 by approximately 14 degrees C against thermal inactivation. For epsilon 186, k(cat) = 293 min(-)(1) and K(M) = 1.08 mM at pH 8.00 and 25 degrees C, with a Mn(2+) concentration of 1 mM. Hydrolysis of pNP-TMP by epsilon 186 depended absolutely on divalent metal ions, and was inhibited by the product TMP. Dependencies on Mn(2+) and Mg(2+) concentrations were examined, giving a K(Mn) of 0.31 mM and a k(cat) of 334 min(-1) for Mn(2+) and a K(Mg) of 6.9 mM and a k(cat) of 19.9 min(-1) for Mg(2+). Inhibition by TMP was formally competitive [K(i) = 4.3 microM (with a Mn(2+) concentration of 1 mM)]. The pH dependence of pNP-TMP hydrolysis by epsilon 186, in the pH range of 6.5-9.0, was found to be simple. K(M) was essentially invariant between pH 6.5 and 8.5, while k(cat) depended on titration of a single group with a pK(a) of 7.7, approaching limiting values of 50 min(-1) at pH <6.5 and 400 min(-1) at pH >9.0. These data are used in conjunction with crystal structures of the complex of epsilon 186 with TMP and two Mn(II) ions bound at the active site to develop insights into the mechanisms of pNP-TMP hydrolysis by epsilon at high and low pH values.     

²H kinetic isotope effects and pH dependence of catalysis as mechanistic probes of rat monoamine oxidase A: comparisons with the human enzyme

Monoamine oxidase A (MAO A) is a mitochondrial outer membrane-bound flavoenzyme important in the regulation of serotonin and dopamine levels. Because the rat is extensively used as an animal model in drug studies, it is important to understand how rat MAO A behaves in comparison with the more extensively studied human enzyme. For many reversible inhibitors, rat MAO A exhibits K(i) values similar to those of human MAO A. The pH profile of k(cat) for rat MAO A shows a pK(a) of 8.2 ± 0.1 for the benzylamine ES complex and pK(a) values of 7.5 ± 0.1 and 7.6 ± 0.1 for the ES complexes with p-CF(3)-(1)H- and p-CF(3)-(2)H-benzylamine, respectively. In contrast to the human enzyme, the rat enzyme exhibits a single pK(a) value (8.3 ± 0.1) with k(cat)/K(m) for benzylamine versus pH and pK(a) values of 7.8 ± 0.1 and 8.1 ± 0.2 for the ascending limbs, respectively, of k(cat)/K(m) versus pH profiles for p-CF(3)-(1)H- and p-CF(3)-(2)H-benzylamine and 9.3 ± 0.1 and 9.1 ± 0.2 for the descending limbs, respectively. The oxidation of para-substituted benzylamine substrate analogues by rat MAO A has large deuterium kinetic isotope effects on k(cat) and on k(cat)/K(m). These effects are pH-independent and range from 7 to 14, demonstrating a rate-limiting α-C-H bond cleavage step in catalysis. Quantitative structure-activity correlations of log k(cat) with the electronic substituent parameter (σ) at pH 7.5 and 9.0 show a dominant contribution with positive ρ values (1.2-1.3) and a pH-independent negative contribution from the steric term. Quantitative structure-activity relationship analysis of the binding affinities of the para-substituted benzylamine analogues for rat MAO A shows an increased van der Waals volume (V(w)) increases the affinity of the deprotonated amine for the enzyme. These results demonstrate that rat MAO A exhibits functional properties similar but not identical with those of the human enzyme and provide additional support for C-H bond cleavage via a polar nucleophilic mechanism.     

Oligopeptidase B: a new type of serine peptidase with a unique substrate-dependent temperature sensitivity

Oligopeptidase B, a member of the novel prolyl oligopeptidase family of serine peptidases, is involved in cell invasion by trypanosomes. The kinetic analysis of the reactions of oligopeptidase B, which preferentially cleaves peptides at two adjacent basic residues, has revealed significant differences from the trypsin-like serine peptidases. (i) The pH dependence of k(cat)/K(m) deviates from normal bell-shaped curves due to ionization of an enzymatic group characterized by a macroscopic pK(a) of approximately 8.3. The effect of this group is abolished at high ionic strength. (ii) The second-order acylation rate constants, k(cat)/K(m), are similar with the ester and the corresponding amide substrates, suggesting that their chemical reactivity does not prevail in the rate-limiting step. The kinetic deuterium isotope effects indicate that the rate-limiting step for k(cat)/K(m) is principally governed by conformational changes. (iii) The pH-k(cat)/K(m) profile and the very low rate constant for benzoyl-citrulline ethyl ester reveal a new kinetically influential group ionizing below the pK(a) of the active site histidine and indicate that the positive charge of arginine is essential for effective catalysis. (iv) The enzyme is inhibited by high concentrations of substrate. The mechanism of inhibition markedly varies with the reaction conditions. (v) The optimum temperature for the reactions of amide substrates is unusually low, slightly below 25 degrees C, whereas with benzoyl-arginine ethyl ester a linear Eyring plot is obtained up to 39 degrees C. The positive entropies of activation point to substantial reorganization of water molecules upon substrate binding.     

Enzyme-coupled assay for beta-xylosidase hydrolysis of natural substrates

We describe here a new enzyme-coupled assay for the quantitation of d-xylose using readily available enzymes that allows kinetic evaluation of hemicellulolytic enzymes using natural xylooligosaccharide substrates. Hydrogen peroxide is generated as an intermediary analyte, which allows flexibility in the choice of the chromophore or fluorophore used as the final reporter. Thus, we present d-xylose quantitation results for solution-phase assays performed with both the fluorescent reporter resorufin, generated from N-acetyl-3,7-dihydroxyphenoxazine (Amplex Red), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), whose corresponding radical cation has an absorbance maximum at approximately 400 nm. We also describe a useful solid-phase variation of the assay performed with the peroxidase substrate 3,3'-diaminobenzidine tetrahydrochloride, which produces an insoluble brown precipitate. In addition, kinetic parameters for hydrolysis of the natural substrates xylobiose and xylotriose were obtained using this assay for a glycosyl hydrolase family 39 beta-xylosidase from Thermoanaerobacterium sp. strain JW/SL YS485 (Swiss-Prot accession no. O30360). At higher xylobiose substrate concentrations the enzyme showed an increase in the rate indicative of transglycosylation, while for xylotriose marked substrate inhibition was observed. At lower xylobiose concentrations k(cat) was 2.7 +/- 0.4 s(-1), K(m) was 3.3 +/- 0.7 mM, and k(cat)/K(m) was 0.82 +/- 0.21 mM(-1) . s(-1). Nonlinear curve fitting to a substrate inhibition model showed that for xylotriose K(i) was 1.7 +/- 0.1 mM, k(cat) was 2.0 +/- 0.1 s(-1), K(m) was 0.144 +/- 0.011 mM, and k(cat)/K(m) was 14 +/- 1.3 mM(-1) . s(-1).     

Chemical mechanism of a cysteine protease, cathepsin C, as revealed by integration of both steady-state and pre-steady-state solvent kinetic isotope effects

Cathepsin C, or dipeptidyl peptidase I, is a lysosomal cysteine protease of the papain family that catalyzes the sequential removal of dipeptides from the free N-termini of proteins and peptides. Using the dipeptide substrate Ser-Tyr-AMC, cathepsin C was characterized in both steady-state and pre-steady-state kinetic modes. The pH(D) rate profiles for both log k cat/ K m and log k cat conformed to bell-shaped curves for which an inverse solvent kinetic isotope effect (sKIE) of 0.71 +/- 0.14 for (D)( k cat/ K a) and a normal sKIE of 2.76 +/- 0.03 for (D) k cat were obtained. Pre-steady-state kinetics exhibited a single-exponential burst of AMC formation in which the maximal acylation rate ( k ac = 397 +/- 5 s (-1)) was found to be nearly 30-fold greater than the rate-limiting deacylation rate ( k dac = 13.95 +/- 0.013 s (-1)) and turnover number ( k cat = 13.92 +/- 0.001 s (-1)). Analysis of pre-steady-state burst kinetics in D 2O allowed abstraction of a normal sKIE for the acylation half-reaction that was not observed in steady-state kinetics. Since normal sKIEs were obtained for all measurable acylation steps in the presteady state [ (D) k ac = 1.31 +/- 0.04, and the transient kinetic isotope effect at time zero (tKIE (0)) = 2.3 +/- 0.2], the kinetic step(s) contributing to the inverse sKIE of (D)( k cat/ K a) must occur more rapidly than the experimental time frame of the transient kinetics. Results are consistent with a chemical mechanism in which acylation occurs via a two-step process: the thiolate form of Cys-234, which is enriched in D 2O and gives rise to the inverse value of (D)( k cat/ K a), attacks the substrate to form a tetrahedral intermediate that proceeds to form an acyl-enzyme intermediate during a proton transfer step expressing a normal sKIE. The subsequent deacylation half-reaction is rate-limiting, with proton transfers exhibiting normal sKIEs. Through derivation of 12 equations describing all kinetic parameters and sKIEs for the proposed cathepsin C mechanism, integration of both steady-state and pre-steady-state kinetics with sKIEs allowed the provision of at least one self-consistent set of values for all 13 rate constants in this cysteine protease's chemical mechanism. Simulation of the resulting kinetic profile showed that at steady state approximately 80% of the enzyme exists in an active-site cysteine-acylated form in the mechanistic pathway. The chemical and kinetic details deduced from this work provide a potential roadmap to help steer drug discovery efforts for this and other disease-relevant cysteine proteases.     

The missing link in petrobactin biosynthesis: asbF encodes a (-)-3-dehydroshikimate dehydratase

The siderophore petrobactin harbors unique 3,4-dihydroxybenzoyl iron-liganding groups. These moieties are known to be synthesized from shikimate pathway precursors, but no reports of the biosynthetic enzymes responsible for this conversion have been published. The gene encoding AsbF from Bacillus thuringiensis 97-27 was overexpressed in an Escherichia coli host. AsbF rapidly and efficiently transforms (-)-3-dehydroshikimate (DHS) into 3,4-dihydroxybenzoate (k(cat)(DHS) = 217 +/- 10 min(-1); K(m)(DHS) = 125 +/- 14 microM) at 37 degrees C and has an absolute requirement for divalent metal. Finally, the pH versus k(cat)(DHS) profile revealed two ionizable groups (pK(a1) = 7.9 +/- 0.1, and pK(a2) = 9.3 +/- 0.1).     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Detailed dissection of a new mechanism for glycoside cleavage: alpha-1,4-glucan lyase

The unusual enzyme, Gracilariopsis alpha-1,4-glucan lyase of the sequence-related glycoside hydrolase family 31, cleaves the glycosidic bond of alpha-1,4-glucans via a beta-elimination reaction involving a covalent glycosyl-enzyme intermediate (Lee, S. S., Yu, S., and Withers, S. G. (2002) J. Am. Chem. Soc. 124, 4948-4949). The classical bell-shaped pH dependence of k(cat)/K(m) indicates two ionizable groups in the active site with apparent pK(a) values of 3.05 and 6.66. Br?nsted relationships of log k(cat) versus pK(a) and log(k(cat)/K(m)) versus pK(a) for a series of aryl glucosides both show a linear monotonic dependence on leaving group pK(a) with low beta(lg) values of 0.32 and 0.33, respectively. The combination of these low beta(lg) values with large secondary deuterium kinetic isotope effects (k(H)/k(D) = 1.16 - 1.19) on the first step indicate a glycosylation step with substantial glycosidic bond cleavage and proton donation to the leaving group oxygen at the transition state. Developed oxocarbenium ion character of the transition state is also suggested by the potent inhibition afforded by acarbose and 1-deoxynojirimycin (K(i) = 20 and 130 nM, respectively) and by the substantial rate reduction afforded by adjacent fluorine substitution. For only one substrate, 5-fluoro-alpha-D-glucopyranosyl fluoride, was the second elimination step shown to be rate-limiting. The large alpha-secondary deuterium kinetic isotope effect (k(H)/k(D) = 1.23) at C-1 and the small primary deuterium kinetic isotope effect (k(H)/k(D) = 1.92) at C-2 confirm an E2 mechanism with strong E1 character for this second step. This considerable structural and mechanistic similarity with retaining alpha-glucosidases is clear evidence for the evolution of an enzyme mechanism within the family.     

The proton transfer step catalyzed by yeast pyruvate kinase

The nature of the proton donor to the C-3 of the enolate of pyruvate, the intermediate in the reaction catalyzed by yeast pyruvate kinase, was investigated by site-directed mutagenesis and physical and kinetic analyses. Thr-298 is correctly located to function as the proton donor. T298S and T298A were constructed and purified. Both mutants are catalytically active with a decrease in k(cat) and k(cat)/K(m)(,PEP). Mn(2+)-activated T298S and T298A do not exhibit homotropic kinetic cooperativity with phosphoenolpyruvate (PEP) in the absence of fructose 1,6-bisphosphate, although PEP binding to enzyme-Mn(2+) is cooperative. The pH dependence of k(cat) for T298A indicates the loss of pK(a)(,2) = 6.4-6.9. Thr-298 affects the ionization (pK(a) approximately 6.5) responsible for modulation of k(cat). Fluorescence studies show altered dissociation constants of ligands to each enzyme complex upon Thr-298 mutations. The rates of the phosphoryl transfer and proton transfer steps in the pyruvate kinase-catalyzed reaction are altered; pyruvate enolization is affected to a greater extent. Proton inventory studies demonstrate solvent isotope effects on k(cat) and k(cat)/K(m)(,PEP). Fractionation factors are metal-dependent and significantly <1. The data suggest that a water molecule in a water channel is the direct proton donor to enolpyruvate and that Thr-298 affects a late step in catalysis.     

Effects of mutations of the active site arginine residues in 4-oxalocrotonate tautomerase on the pKa values of active site residues and on the pH dependence of catalysis.

The unusually low pK(a) value of the general base catalyst Pro-1 (pK(a) = 6.4) in 4-oxalocrotonate tautomerase (4-OT) has been ascribed to both a low dielectric constant at the active site and the proximity of the cationic residues Arg-11 and Arg-39 [Stivers, J. T., Abeygunawardana, C., Mildvan, A. S., Hajipour, G., and Whitman, C. P. (1996) Biochemistry 35, 814-823]. In addition, the pH-rate profiles in that study showed an unidentified protonated group essential for catalysis with a pK(a) of 9.0. To address these issues, the pK(a) values of the active site Pro-1 and lower limit pK(a) values of arginine residues were determined by direct (15)N NMR pH titrations. The pK(a) values of Pro-1 and of the essential acid group were determined independently from pH-rate profiles of the kinetic parameters of 4-OT in arginine mutants of 4-OT and compared with those of wild type. The chemical shifts of all of the Arg Nepsilon resonances in wild-type 4-OT and in the R11A and R39Q mutants were found to be independent of pH over the range 4.9-9.7, indicating that no arginine is responsible for the kinetically determined pK(a) of 9.0 for an acidic group in free 4-OT. With the R11A mutant, where k(cat)/K(m) was reduced by a factor of 10(2.9), the pK(a) of Pro-1 was not significantly altered from that of the wild-type enzyme (pK(a) = 6.4 +/- 0.2) as revealed by both direct (15)N NMR titration (pK(a) = 6.3 +/- 0.1) and the pH dependence of k(cat)/K(m) (pK(a) = 6.4 +/- 0.2). The pH-rate profiles of both k(cat)/K(m) and k(cat) for the reaction of the R11A mutant with the dicarboxylate substrate, 2-hydroxymuconate, showed humps, i.e., sharply defined maxima followed by nonzero plateaus. The humps disappeared in the reaction with the monocarboxylate substrate, 2-hydroxy-2,4-pentadienoate, indicating that, unlike the wild-type enzyme which reacts only with the dianionic form of the dicarboxylic substrate, the R11A mutant reacts with both the 6-COOH and 6-COO(-) forms, with the 6-COOH form being 12-fold more active. This reversal in the preferred ionization state of the 6-carboxyl group of the substrate that occurs upon mutation of Arg-11 to Ala provides strong evidence that Arg-11 interacts with the 6-carboxylate of the substrate. In the R39Q mutant, where k(cat)/K(m) was reduced by a factor of 10(3), the kinetically determined pK(a) value for Pro-1 was 4.6 +/- 0.2, while the ionization of Pro-1 showed negative cooperativity with an apparent pK(a) of 7.1 +/- 0.1 determined by 1D (15)N NMR. From the Hill coefficient of 0.54, it can be shown that the apparent pK(a) value of 7.1 could result most simply from the averaging of two limiting pK(a) values of 4.6 and 8.2. Mutation of Arg-39, by altering the structure of the beta-hairpin which covers the active site, could result in an increase in the solvent exposure of Pro-1, raising its upper limit pK(a) value to 8.2. In the R39A mutant, the kinetically determined pK(a) of Pro-1 was also low, 5.0 +/- 0.2, indicating that in both the R39Q and R39A mutants, only the sites with low pK(a) values were kinetically operative. With the fully active R61A mutant, the kinetically determined pK(a) of Pro-1 (pK(a) = 6.5 +/- 0.2) agreed with that of wild-type 4-OT. It is concluded that the unusually low pK(a) of Pro-1 shows little contribution from electrostatic effects of the nearby cationic Arg-11, Arg-39, and Arg-61 residues but results primarily from a site of low local dielectric constant.