Dissociation and in vitro reconstitution of bovine liver uridine diphosphoglucose dehydrogenase. The paired subunit nature of the enzyme

Uridine diphosphoglucose dehydrogenase (EC 1.1.1.22: UDPglucose dehydrogenase) at pH 5.5-7.8 is a stable homohexamer of 305 +/- 7 kDa that does not undergo concentration-dependent dissociation at enzyme concentrations greater than 5 micrograms/mL. Chemical cross-linking of the native enzyme at varying glutaraldehyde concentrations yields dimers, tetramers, and hexamers; at greater than 2% (w/v) glutaraldehyde, plateau values of 21% monomers, 16% dimers, 5% tetramers, and 58% hexamers are obtained. Dissociation at acid pH (pH 2.3) or in 4-6 M guanidine hydrochloride leads to inactive monomers (Mr 52,000). Denaturation at increasing guanidine hydrochloride concentration reveals separable unfolding steps suggesting the typical domain structure of dehydrogenases holds for the present enzyme. At greater than 4 M guanidine hydrochloride complete randomization of the polypeptide chains is observed after 10-min denaturation. Reconstitution of the native hexamer after dissociation/denaturation has been monitored by reactivation and glutaraldehyde fixation. The kinetics may be described in terms of a sequential uni-bimolecular model, governed by rate-determining folding and association steps at the monomer level. Trimeric intermediates do not appear in significant amounts. Reactivation is found to parallel hexamer formation. Structural changes during reconstitution (monitored by circular dichroism) are characterized by complex kinetics, indicating the rapid formation of "structured monomers" (with most of the native secondary structure) followed by slow "reshuffling" prior to subunit association. The final product of reconstitution is indistinguishable from the initial native enzyme.     

Effect of glycosylation on the mechanism of renaturation of invertase from yeast

N-Glycosylation occurs cotranslationally as soon as the growing polypeptide chain enters the endoplasmic reticulum, before the final native-like folded state is reached. We examined the role of the carbohydrate chains in the mechanism of protein folding. The in vitro folding and association of yeast invertase are used as an experimental system. External invertase contains approximately 50% carbohydrate, whereas cytoplasmic invertase is not glycosylated. The functional native state of both proteins is a homodimer. At pH greater than or equal to 6.5 and at protein concentrations below 3 micrograms/ml, the kinetics of reactivation and the final yields are similar for the two invertases. For both proteins, reactivation is a sequential reaction with a lag phase at the beginning. The nonglycosylated protein tends to aggregate during reactivation at low pH and at protein concentrations above 3 micrograms/ml. After separation of inactive material, the renatured protein is indistinguishable from the original native state by a number of physicochemical and functional criteria. The results suggest that the carbohydrate moiety does not affect the mechanism of folding and association of invertase. However, glycosylation improves the solubility of unfolded or partially folded invertase molecules and hence leads to a suppression of irreversible aggregation. Such a protective effect may also be important for the in vivo maturation of nascent glycosylated protein chains.     

Reconstitution of rabbit muscle aldolase after dissociation and denaturation at alkaline pH.

Tetrameric rabbit muscle aldolase is dissociated to the inactive monomer at strongly alkaline pH (pH greater than or equal to 12). As shown by sedimentation velocity, fluorescence emission, and specific activity, the final profiles of dissociation, denaturation, and deactivation run parallel. Increasing incubation time proves the enzyme to be metastable in the pH range of deactivation. At 10 less than pH less than 12 "hysteresis" of the deactivation-reactivation reaction is observed. Short incubation at pH greater than or equal to 12 leads to high yields of reactivation (greater than or equal to 60%), while irreversibly denatured enzyme protein is the final product after long incubation. The kinetics of reconstitution under essentially irreversible conditions (pH 7.6) can be described by a sequential uni-bimolecular mechanism, assuming partial activity of the isolated subunits. The kinetic constants correspond to those observed for the reactivation after denaturation at acid pH or in 6M guanidine. HCl. Obviously the pH-dependent deactivation and reactivation of aldolase at alkaline pH obeys the general transconformation/association model which has been previously reported to hold for the reconstitution of numerous oligomeric enzymes after denaturation in various denaturants.     

Evidence that the N-terminal part of the S-layer protein from Bacillus stearothermophilus PV72/p2 recognizes a secondary cell wall polymer.

The S-layer of Bacillus stearothermophilus PV72/p2 shows oblique lattice symmetry and is composed of identical protein subunits with a molecular weight of 97,000. The isolated S-layer subunits could bind and recrystallize into the oblique lattice on native peptidoglycan-containing sacculi which consist of peptidoglycan of the A1gamma chemotype and a secondary cell wall polymer with an estimated molecular weight of 24,000. The secondary cell wall polymer could be completely extracted from peptidoglycan-containing sacculi with 48% HF, indicating the presence of phosphodiester linkages between the polymer chains and the peptidoglycan backbone. The cell wall polymer was composed mainly of GlcNAc and ManNAc in a molar ratio of 4:1, constituted about 20% of the peptidoglycan-containing sacculus dry weight, and was also detected in the fraction of the S-layer self-assembly products. Extraction experiments and recrystallization of the whole S-layer protein and proteolytic cleavage fragments confirmed that the secondary cell wall polymer is responsible for anchoring the S-layer subunits by the N-terminal part to the peptidoglycan-containing sacculi. In addition to this binding function, the cell wall polymer was found to influence the in vitro self-assembly of the guanidinium hydrochloride-extracted S-layer protein. Chemical modification studies further showed that the secondary cell wall polymer does not contribute significant free amino or carboxylate groups to the peptidoglycan-containing sacculi.     

Molecular weight and tertiary structure of transketolase from baker's yeast]

Molecular weight of native apotransketolase from baker's yeast is found to be 159000 +/- 6000 by means of sedimentation equilibrium and sedimentation-diffusion rate. The enzyme in a relatively low concentration reversibly dissociates into two subunits with molecular weight of about 80 000 at pH 7.6 and 20 degrees C. The equilibrium constant of the reaction monomer-dimer is 4.4 . 10(3) M-1. A decrease of the temperature stimulates the association of monomers into dimer, while the shift of pH 7.6 into acid or alkaline region stimulates the dissociation process. Dissociation becames irreversible at pH less than 5 and greater than 10.5.     

Assembly of apoferritin from horse spleen: comparison of the protein in its native and reassembled state

The in vitro selfassembly of apoferritin after previous dissociation and unfolding in 7.2M guanidinium chloride, pH 3.5, yields up to 80% of a protein complex exhibiting the molecular mass of the native icositetramer of greater than or equal to 450 kDa. After removal of high molecular mass byproducts, the final reassembly product proves to be indistinguishable from native apoferritin with respect to its functional and conformational properties. These refer to the intrinsic fluorescence and to the far and near UV circular dichroism. The unfolding transitions of the native and reassembled protein in aqueous guanidinium chloride or at acid pH coincide within the range of error. The reassembled protein is also able to catalyze the oxidation of Fe(II). Higher polymers of the apoferritin complex represent most of the residual 20% of the reconstituted protein. They are stabilized by non-covalent (preferentially hydrophobic) interactions, and may be disassembled to the icositetramer by preferential solvation of the protein in the presence of less than or equal to 50% (v/v) ethylene glycol. The change in fluorescence emission accompanying polymerization reflects altered surface properties of the apoferritin subunits compatible with those reported for the ferritin----hemosiderin transition.     

Relevance of charged groups for the integrity of the S-layer from Bacillus coagulans E38-66 and for molecular interactions.

In this paper, the importance of charged amino and carboxyl groups for the integrity of the cell surface layer (S-layer) lattice from Bacillus coagulans E38-66 and for the self-assembly of the isolated subunits was investigated. Amidination of the free amino groups which preserved their positive net charge had no influence on both. On the other hand, acetylation and succinylation, which converted the amino groups into either neutral or negatively charged groups, and amidation of carboxyl groups were accompanied by the disintegration or at least by the loss of the regular structure of the S-layer lattice. Treatment of S-layer monolayers with the zero-length cross-linker carbodiimide led to the introduction of peptide bonds between activated carboxyl groups and amino groups from adjacent subunits. This clearly indicated that in the native S-layer lattice the charged groups are located closely enough for direct electrostatic interactions. Under disrupting conditions in which the S-layer polypeptide chains were unfolded, 58% of the Asx and Glx residues could be amidated, indicating that they occur in the free carboxylic acid form. As derived from chemical modification of monolayer self-assembly products, about 90% of the lysine and 70% of the aspartic and glutamic acid residues are aligned on the surface of the S-layer protein domains. This corresponded to 45 amino groups and to 63 carboxyl groups per S-layer subunit. Labelling experiments with macromolecules with different sizes and charges and adsorption studies with ion-exchange particles revealed a surplus of free carboxyl groups on the inner and on the outer faces of the S-layer lattice. Since the carboxyl groups on the outer S-layer face were accessible only for protein molecules significantly smaller then the S-layer protomers or for positively charged, thin polymer chains extending from the surface of ion-exchange beads, the negatively charged sites must be located within indentations of the corrugated S-layer protein network. This was in contrast to the carboxyl groups on the inner S-layer face, which were found to be exposed on elevations of the S-layer protein domains (D. Pum, M. Sára, and U.B. Sleytr, J. Bacteriol. 171:5296-5303, 1989).     

Mechanism of inhibition of hepatic protein synthesis in rats by the carcinogen, methylazoxymethanol acetate.

Treatment of rats with the carcinogen, methylazoxymethanol acetate, results in a rapid, marked inhibition of hepatic protein synthesis and disaggregation of polysomes. Studies were undertaken to learn the mechanism by which this carcinogen induces these effects in rat liver. The data show that the inhibition of endogenous protein synthesis is not due to an effect on the high speed supernatant 'factors' but rather at the level of the polysome, and that both free and membrane-bound polysomes are affected. Poly(U)-directed polyphenylalanine synthesis by native ribosomal subunits is greater in preparations isolated from rats treated with carcinogen than it is in controls. Moreover, the native ribosomal subunit fraction from treated livers in response to added rabbit globin mRNA is able to synthesize a protein similar in molecular weight to globin. These studies show that methylazoxymethanol acetate does not induce significant alterations of ribosomal subunits or of initiation factors and suggest that the inhibition of protein synthesis and disaggregation of polysomes may be the results of an alteration of cytoplasmic mRNA, or its association with ribosomes.     

Studies of the process of renaturation and assembly of Escherichia coli succinyl-CoA synthetase from its alpha and beta subunits

Succinyl-CoA synthetase catalyzes the substrate-level phosphorylation step of the tricarboxylic acid cycle. The enzyme, as isolated from Escherichia coli, has an alpha 2 beta 2 subunit structure. It is known that substrate-binding sites are distributed between both subunit types and that the active enzyme is the nondissociating tetramer. This paper describes a study of the process of assembly of the enzyme from its denatured constituent subunits. Starting with equimolar mixtures of the subunits that are prepared in denaturing conditions (6 M urea, 5% acetic acid), rapid renaturation to produce virtually a fully active enzyme occurs after neutralization and dilution under suitable conditions. This process occurs most efficiently in the presence of either ATP or Pi, indicating that occupation of the phosphoryl-binding site on the refolding alpha subunit facilitates productive intrasubunit interactions. We have determined conditions of protein concentration, pH, temperature, final urea concentration, and buffer compositions that optimize both the rate and extent of production of active enzyme. The final refolded product is indistinguishable from the native species with respect to its specific catalytic activity, size, and other physical properties. To probe further the mechanism and route of renaturation, we have shown that the rate of appearance of activity has first-order dependence on each of the two subunits. The step that determines the rate of assembly is thus bimolecular, such as the association of structural monomers to form a dimeric transient species. The highly specific mutual interactions between the refolding transient species of subunits must be essential for the correct assembly of this enzyme from the two gene products in vivo.     

Evidence that an N-terminal S-layer protein fragment triggers the release of a cell-associated high-molecular-weight amylase in Bacillus stearothermophilus ATCC 12980.

During growth on starch medium, the S-layer-carrying Bacillus stearothermophilus ATCC 12980 and an S-layer-deficient variant each secreted three amylases, with identical molecular weights of 58,000, 122,000, and 184,000, into the culture fluid. Only the high-molecular-weight amylase (hmwA) was also identified as cell associated. Extraction and reassociation experiments showed that the hmwA had a high-level affinity to the peptidoglycan-containing layer and to the S-layer surface, but the interactions with the peptidoglycan-containing layer were stronger than those with the S-layer surface. For the S-layer-deficient variant, no changes in the amount of cell-associated and free hmwA could be observed during growth on starch medium, while for the S-layer-carrying strain, cell association of the hmwA strongly depended on the growth phase of the cells. The maximum amount of cell-associated hmwA was observed 3 h after inoculation, which corresponded to early exponential growth. The steady decrease in cell-associated hmwA during continued growth correlated with the appearance and the increasing intensity of a protein with an apparent molecular weight of 60,000 on sodium dodecyl sulfate gels. This protein had a high-level affinity to the peptidoglycan-containing layer and was identified as an N-terminal S-layer protein fragment which did not result from proteolytic cleavage of the whole S-layer protein but seems to be a truncated copy of the S-layer protein which is coexpressed with the hmwA under certain culture conditions. During growth on starch medium, the N-terminal S-layer protein fragment was integrated into the S-layer lattice, which led to the loss of its regular structure over a wide range and to the loss of amylase binding sites. Results obtained in the present study provide evidence that the N-terminal part of the S-layer protein is responsible for the anchoring of the subunits to the peptidoglycan-containing layer, while the surface-located C-terminal half could function as a binding site for the hmwA.     

The S-Layer Proteins of Two Bacillus stearothermophilus Wild-Type Strains Are Bound via Their N-Terminal Region to a Secondary Cell Wall Polymer of Identical Chemical Composition

Two Bacillus stearothermophilus wild-type strains were investigated regarding a common recognition and binding mechanism between the S-layer protein and the underlying cell envelope layer. The S-layer protein from B. stearothermophilus PV72/p6 has a molecular weight of 130,000 and assembles into a hexagonally ordered lattice. The S-layer from B. stearothermophilus ATCC 12980 shows oblique lattice symmetry and is composed of subunits with a molecular weight of 122,000. Immunoblotting, peptide mapping, N-terminal sequencing of the whole S-layer protein from B. stearothermophilus ATCC 12980 and of proteolytic cleavage fragments, and comparison with the S-layer protein from B. stearothermophilus PV72/p6 revealed that the two S-layer proteins have identical N-terminal regions but no other extended structurally homologous domains. In contrast to the heterogeneity observed for the S-layer proteins, the secondary cell wall polymer isolated from peptidoglycan-containing sacculi of the different strains showed identical chemical compositions and comparable molecular weights. The S-layer proteins could bind and recrystallize into the appropriate lattice type on native peptidoglycan-containing sacculi from both organisms but not on those extracted with hydrofluoric acid, leading to peptidoglycan of the A1γ chemotype. Affinity studies showed that only proteolytic cleavage fragments possessing the complete N terminus of the mature S-layer proteins recognized native peptidoglycan-containing sacculi as binding sites or could associate with the isolated secondary cell wall polymer, while proteolytic cleavage fragments missing the N-terminal region remained unbound. From the results obtained in this study, it can be concluded that S-layer proteins from B. stearothermophilus wild-type strains possess an identical N-terminal region which is responsible for anchoring the S-layer subunits to a secondary cell wall polymer of identical chemical composition.     

The kinetics of the alkaline dissociation of myosin.

The rates of two processes in alkaline (pH 10.5–11.5) myosin solutions at 0 °C have been investigated: production of ionized tyrosine residues and production of light subunits. The progressive absorbance change is shown to result from a first-order irrevocable exposure to solvent and subsequent ionization of 40% of the tyrosine residues. Extrapolation to zero time gives the spectrophotometric ionization curve for native myosin; the pK of the abnormal tyrosines exceeds 12. Similarly, extrapolation to infinite time gives the curve for denatured myosin; the pK of the normal tyrosines (and of all tyrosines after denaturation) is 11.0–11.6. From the pH dependence of the rate, it is found that activation requires ionization of six residues and that their pK is much greater than 11.3. The rate of production of subunits was determined by fractionating the reaction mixture and determining the weight of light subunits produced. The process is also first order. Within experimental error, the rate constants for these two processes are equal. We conclude that they have the same rate-determining step. The data are consistent with either of two simple possible mechanisms. These are a rapid conformation change, followed by rate-determining subunit dissociation, followed by a rapid, irrevocable conformation change; or, a rapid conformation change, followed by a rate-determining, irrevocable conformation change, followed by rapid subunit dissociation.     

Kinetics of glutaraldehyde fixation of erythrocytes: size, deformability, form, osmotic and hemolytic properties.

Red blood cells interact with glutaraldehyde (GA) in a complex kinetic pattern of events. At a given GA concentration in phosphate buffered saline (PBS), the sequence of cell 'volume' response, as measured by resistive pulse spectroscopy (RPS), includes: an immediate response to the overall solution osmolality; a constant volume, latent phase; a rapid swelling phase; an intermediate constant volume phase; and a shrinkage phase to a final steady state volume. The final volume depends on fixative solution osmolality; for GA concentrations between 0.05% and 0.25% w/v, fixative osmolalities of less than 355 mosM, including 'isotonic', or greater than 355 mosM, lead to final cell volumes greater or less than native, respectively. Cell-membrane deformability decreases continuously and monotonically with time, as assessed by RPS. The rate of fixation is a direct function of GA concentration, in accordance with a derived empirical expression. The measured kinetic responses are related to considerations of cell size, deformability, and form, and to mechanisms involved in abrupt osmotic hemolysis.     

An analysis of the reassembly of denatured creatine kinase from monkey brain

Creatine kinase isolated from monkey brain was characterized with respect to denaturation/inactivation and renaturation/reactivation/reassociation in order to determine the mechanism of reassembly. Enzyme unfolded in 8 M urea exhibits several characteristics of denatured protein: complete loss of enzymatic activity, decrease in intrinsic fluorescence with a red shift in the emission maximum and loss of circular dichroism at 220 nm. The renatured protein reassembles to its apparently native condition as judged by these criteria, but small differences of uncertain origin persist. Dependence of activity and fluorescence on denaturant concentration indicate that inactivation is more sensitive to urea than is unfolding; spectral changes at the intermediate urea concentrations suggest formation of aggregated protein. Upon dilution, enzyme previously exposed to 8 M urea for 40 min regains 70-80% native activity, independent of protein concentration over the range of 0.56-160 nM. Reactivation kinetics, measured using the assay mixture with and without trypsin, are independent of protein concentration, and are adequately described by a single rate constant, 3.2 X 10(-3) s-1 and 4.2 X 10(-3) s-1, respectively. Reactivation is completed 20-30 min after initiation of renaturation. Fluorescence changes during refolding are at least biphasic, exhibiting a rapid increase, then a slow decrease completed at approximately 15-20 min after initiating refolding. Reassociation is measured by competitive hybridization between dimerizing B subunits and M subunits to form MB heterodimer. The time dependent decay in heterodimer formation during competitive dimerization shows that reassociation is completed between 60 and 90 min after initiation of reassembly. These results indicate that the brain isozyme of creatine kinase, like the muscle form, is composed of subunits which do not require association for expression of catalytic activity. Furthermore, a comparison of spectral data and susceptibility to trypsin inactivation between the muscle and brain isozymes supports previous suggestions that in the native state, the brain isozyme is a conformationally looser, more open protein.     

A theoretical model successfully identifies features of hepatitis B virus capsid assembly.

The capsids of most spherical viruses are icosahedral, an arrangement of multiples of 60 subunits. Though it is a salient point in the life cycle of any virus, the physical chemistry of virus capsid assembly is poorly understood. We have developed general models of capsid assembly that describe the process in terms of a cascade of low order association reactions. The models predict sigmoidal assembly kinetics, where intermediates approach a low steady state concentration for the greater part of the reaction. Features of the overall reaction can be identified on the basis of the concentration dependence of assembly. In simulations, and on the basis of our understanding of the models, we find that nucleus size and the order of subsequent "elongation" reactions are reflected in the concentration dependence of the extent of the reaction and the rate of the fast phase, respectively. The reaction kinetics deduced for our models of virus assembly can be related to the assembly of any "spherical" polymer. Using light scattering and size exclusion chromatography, we observed polymerization of assembly domain dimers of hepatitis B virus (HBV) capsid protein. Empty capsids assemble at a rate that is a function of protein concentration and ionic strength. The kinetics of capsid formation were sigmoidal, where the rate of the fast phase had second-power concentration dependence. The extent of assembly had third-power concentration dependence. Simulations based on the models recapitulated the concentration dependences observed for HBV capsid assembly. These results strongly suggest that in vitro HBV assembly is nucleated by a trimer of dimers and proceeds by the addition of individual dimeric subunits. On the basis of this mechanism, we suggest that HBV capsid assembly could be an important target for antiviral therapeutics.     

Assembly of Octopus dofleini hemocyanin. A study of the kinetics by sedimentation, light scattering and electron microscopy

The kinetics of association of Octopus dofleini hemocyanin subunits to form the native decameric molecule have been studied with a combination of sedimentation, light scattering and electron microscopy. The reaction, initiated by addition of magnesium, is relatively slow, requiring hours to reach completion, with monomer and decamer as predominant molecular species throughout. Analysis of the light-scattering data, including stopped-flow studies, reveals an initial lag period in the reaction, followed by a second-order process that is rate limiting. The lag period depends on both protein and magnesium ion concentration. Electron microscope studies reveal intermediates in the process, and support a model of assembly in which nucleation begins at the dimer level. Theoretical models for the process are compared.     

Localized insertion of new S-layer during growth of Bacillus stearothermophilus strains

Bacillus stearothermophilus strains PV 72 and ATCC 12980 carry a crystalline surface layer (S-layer) with hexagonal (p6) and oblique (p2) symmetry, respectively. Sites of insertions of new subunits into the regular lattice during cell growth have been determined by the indirect fluorescent antibody technique and the protein A/colloidal gold technique.During S-layer growth on both bacillus strains the following common features were noted: 1. shedding of intact S-layer or turnover of individual subunits was not seen; 2. new S-layer was deposited in helically-arranged bands over the cylindrical surface of the cell at a pitch angle related to the orientation of the lattice vectors of the crystalline array; 3. little or no S-layer was inserted into pre-existing S-layer at the poles, and 4. septal regions and, subsequently, newly formed cell poles were covered with new S-layer protein.     

pH-jump-induced folding and unfolding studies of barstar: evidence for multiple folding and unfolding pathways.

Equilibrium and kinetic characterization of the high pH-induced unfolding transition of the small protein barstar have been carried out in the pH range 7-12. A mutant form of barstar, containing a single tryptophan, Trp 53, completely buried in the core of the native protein, has been used. It is shown that the protein undergoes reversible unfolding above pH 10. The pH 12 form (the D form) appears to be as unfolded as the form unfolded by 6 M guanidine hydrochloride (GdnHCl) at pH 7 (the U form): both forms have similar fluorescence and far-UV circular dichroism (CD) signals and have similar sizes, as determined by dynamic light scattering and size-exclusion chromatography. No residual structure is detected in the D form: addition of GdnHCl does not alter its fluorescence and far-UV CD properties. The fluorescence signal of Trp 53 has been used to monitor folding and unfolding kinetics. The kinetics of folding of the D form in the pH range 7-11 are complex and are described by four exponential processes, as are the kinetics of unfolding of the native state (N state) in the pH range 10.5-12. Each kinetic phase of folding decreases in rate with increase in pH from 7 to 10.85, and each kinetic phase of unfolding decreases in rate with decrease in pH from 12 to 10.85. At pH 10.85, the folding and unfolding rates for any particular kinetic phase are identical and minimal. The two slowest phases of folding and unfolding have identical kinetics whether measured by Trp 53 fluorescence or by mean residue ellipticity at 222 nm. Direct determination of the increase in the N state with time of folding at pH 7 and of the D form with time of unfolding at pH 12, by means of double-jump assays, show that between 85 and 95% of protein molecules fold or unfold via fast pathways between the two forms. The remaining 5-15% of protein molecules appear to fold or unfold via slower pathways, on which at least two intermediates accumulate. The mechanism of folding from the high pH-denatured D form is remarkably similar to the mechanism of folding from the urea or GdnHCl-denatured U form.     

Unfolding and refolding of dimeric creatine kinase equilibrium and kinetic studies.

Equilibrium and kinetic studies of the guanidine hydrochloride induced unfolding-refolding of dimeric cytoplasmic creatine kinase have been monitored by intrinsic fluorescence, far ultraviolet circular dichroism, and 1-anilinonaphthalene-8-sulfonate binding. The GuHCl induced equilibrium-unfolding curve shows two transitions, indicating the presence of at least one stable equilibrium intermediate in GuHCl solutions of moderate concentrations. This intermediate is an inactive monomer with all of the thiol groups exposed. The thermodynamic parameters obtained by analysis using a three-state model indicate that this intermediate is similar in energy to the fully unfolded state. There is a burst phase in the refolding kinetics due to formation of an intermediate within the dead time of mixing (15 ms) in the stopped-flow apparatus. Further refolding to the native state after the burst phase follows biphasic kinetics. The properties of the burst phase and equilibrium intermediates were studied and compared. The results indicate that these intermediates are similar in some respects, but different in others. Both are characterized by pronounced secondary structure, compact globularity, exposed hydrophobic surface area, and the absence of rigid side-chain packing, resembling the "molten globule" state. However, the burst phase intermediate shows more secondary structure, more exposed hydrophobic surface area, and more flexible side-chain packing than the equilibrium intermediate. Following the burst phase, there is a fast phase corresponding to folding of the monomer to a compact conformation. This is followed by rapid assembly to form the dimer. Neither of the equilibrium unfolding transitions are protein concentration dependent. The refolding kinetics are also not concentration dependent. This suggests that association of the subunits is not rate limiting for refolding, and that under equilibrium conditions, dissociation occurs in the region between the two unfolding transitions. Based upon the above results, schemes of unfolding and refolding of creatine kinase are proposed.