Detection of microarray-hybridized oligonucleotides with magnetic beads

The efficiency of hybridization analysis with oligonucleotide microarrays depends heavily on the method of detection. Conventional methods based on labeling nucleic acids with fluorescent, chemiluminescent, enzyme, or radioactive reporters suffer from a number of serious drawbacks which demand development of new detection techniques. Here, we report two new approaches for detection of hybridization with oligonucleotide microarrays employing magnetic beads as active labels. In the first method streptavidin-coated magnetic beads are used to discover biotin-labeled DNA molecules hybridized with arrayed oligonucleotide probes. In the second method biotin-labeled DNA molecules are bound first to the surface of magnetic beads and then hybridized with arrayed complementary strands on bead-array contacts. Using a simple low-power microscope with a dark-field illumination and a pair of complementary primers as a model hybridization system we evaluated sensitivity, speed, and cost of the new detection method and compared its performance with the detection techniques employing enzyme and fluorescent labels. It was shown that the detection of microarray-hybridized DNA with magnetic beads combines low cost with high speed and enhanced assay sensitivity, opening a new way to routine hybridization assays which do not require precise measurements of DNA concentration.     

A simple nucleic acid hybridization/latex agglutination assay for the rapid detection of polymerase chain reaction amplicons

We have developed a new method for the detection of nucleic acid hybridization, based on a simple latex agglutination test that can be evaluated by the unaided eye. Nucleic acid, e.g., a polymerase chain reaction (PCR) product, is denatured and incubated with polystyrene beads carrying covalently bound complementary oligonucleotide sequences. Hybridization of the nucleic acids leads to aggregation of the latex particles, thereby verifying the presence of target sequence. The test is performed at room temperature, and results are available within 10 min. As a proof of principle, the hybridization/latex agglutination assay was applied to the detection of purified PCR fragments either specific for Salmonella spp. or a synthetic sequence, and to the detection of Salmonella enterica in artificially contaminated chicken samples. A few nanograms of purified PCR fragments were detectable. In artificially contaminated chicken samples, 3 colony-forming units (cfu)/25 g were detected in one of three replicates, and 30 cfu/25 g were detected in both of two replicates when samples for PCR were taken directly from primary enrichment, demonstrating the practical applicability of this test system. Even multiplex detection might be achievable. This novel kind of assay could be useful for a range of applications where hybridization of nucleic acids, e.g., PCR fragments, is to be detected.     

Multienzyme-nanoparticles amplification for sensitive virus genotyping in microfluidic microbeads array using Au nanoparticle probes and quantum dots as labels

A novel microfluidic device with microbeads array was developed and sensitive genotyping of human papillomavirus was demonstrated using a multiple-enzyme labeled oligonucleotide-Au nanoparticle bioconjugate as the detection tool. This method utilizes microbeads as sensing platform that was functionalized with the capture probes and modified electron rich proteins, and uses the horseradish peroxidase (HRP)-functionalized gold nanoparticles as label with a secondary DNA probe. The functionalized microbeads were independently introduced into the arrayed chambers using the loading chip slab. A single channel was used to generate weir structures to confine the microbeads and make the beads array accessible by microfluidics. Through "sandwich" hybridization, the enzyme-functionalized Au nanoparticles labels were brought close to the surface of microbeads. The oxidation of biotin-tyramine by hydrogen peroxide resulted in the deposition of multiple biotin moieties onto the surface of beads. This deposition is markedly increased in the presence of immobilized electron rich proteins. Streptavidin-labeled quantum dots were then allowed to bind to the deposited biotin moieties and displayed the signal. Enhanced detection sensitivity was achieved where the large surface area of Au nanoparticle carriers increased the amount HRP bound per sandwiched hybridization. The on-chip genotyping method could discriminate as low as 1fmol/L (10zmol/chip, SNR>3) synthesized HPV oligonucleotides DNA. The chip-based signal enhancement of the amplified assay resulted in 1000 times higher sensitivity than that of off-chip test. In addition, this on-chip format could discriminate and genotype 10copies/μL HPV genomic DNA using the PCR products. These results demonstrated that this on-chip approach can achieve highly sensitive detection and genotyping of target DNA and can be further developed for detection of disease-related biomolecules at the lowest level at their earliest incidence.     

Solid-phase cloning for high-throughput assembly of single and multiple DNA parts

We describe solid-phase cloning (SPC) for high-throughput assembly of expression plasmids. Our method allows PCR products to be put directly into a liquid handler for capture and purification using paramagnetic streptavidin beads and conversion into constructs by subsequent cloning reactions. We present a robust automated protocol for restriction enzyme based SPC and its performance for the cloning of >60 000 unique human gene fragments into expression vectors. In addition, we report on SPC-based single-strand assembly for applications where exact control of the sequence between fragments is needed or where multiple inserts are to be assembled. In this approach, the solid support allows for head-to-tail assembly of DNA fragments based on hybridization and polymerase fill-in. The usefulness of head-to-tail SPC was demonstrated by assembly of >150 constructs with up to four DNA parts at an average success rate above 80%. We report on several applications for SPC and we suggest it to be particularly suitable for high-throughput efforts using laboratory workstations.     

Use of surface plasmon-coupled emission to measure DNA hybridization

The authors describe a new approach to measuring DNA hybridization based on surface plasmon-coupled emission (SPCE). SPCE is the resonance coupling of excited fluorophores with electron motions in thin metal films, resulting in efficient transfer of energy through the film and radiation into the glass substrate. The authors evaluated the use of SPCE for detection of DNA hybridization. An unlabeled capture biotinylated oligonucleotide was attached near the surface of a thin (50 nm) silver film using streptavidin. The authors then measured the emission intensity of single-stranded Cy5-labeled DNA upon binding to a complementary oligomer attached to a silver film. Hybridization could be detected by an increase in SPCE, which appeared as light radiated into the substrate at a sharply defined angle near 73 degrees from the normal. The largest signals were observed when the excitation angle of incidence equaled the surface plasmon wavelength, but directional emission was also observed without excitation by the surface plasmon evanescent field. The increased intensity is due to proximity to the metal surface, so that hybridization can be detected without a change in the quantum yield of the fluorophore. These results indicate that SPCE can provide highly sensitive real-time measurement of DNA hybridization.     

A new photoelectrochemical biosensors based on DNA conformational changes and isothermal circular strand-displacement polymerization reaction

We report a strategy for the transduction of DNA hybridization into a readily detectable photoelectrochemical signal by means of a conformational change analogous to electrochemical DNA (E-DNA) approach. To demonstrate the effect of distance change for photosensitizer to the surface of electrode on the change of photocurrent, photosensitizer Ru(bpy)(2)(dcbpy)(2+) tagged DNA stem-loop structures were self-assembled onto a nanogold modified ITO electrode. Hybridization induced a large conformational change in DNA structure, which in turn significantly altered the electron-transfer tunneling distance between the electrode and photosensitizer. The resulting change in photocurrent was proportional to the concentration of DNA in the range of 1.0×10(-10)-8.0×10(-9)M. In order to improve the sensitivity of the photoelectrochemical biosensor, an amplified detection method based on isothermal strand displacement polymerization reaction was employed. With multiple rounds of isothermal strand replication, which led to strand displacement and constituted consecutive signal amplification, a detection limit of 9.4×10(-14)M target DNA was achieved.     

Electric chips for rapid detection and quantification of nucleic acids

A silicon chip-based electric detector coupled to bead-based sandwich hybridization (BBSH) is presented as an approach to perform rapid analysis of specific nucleic acids. A microfluidic platform incorporating paramagnetic beads with immobilized capture probes is used for the bio-recognition steps. The protocol involves simultaneous sandwich hybridization of a single-stranded nucleic acid target with the capture probe on the beads and with a detection probe in the reaction solution, followed by enzyme labeling of the detection probe, enzymatic reaction, and finally, potentiometric measurement of the enzyme product at the chip surface. Anti-DIG-alkaline phosphatase conjugate was used for the enzyme labeling of the DIG-labeled detection probe. p-Aminophenol phosphate (pAPP) was used as a substrate. The enzyme reaction product, p-aminophenol (pAP), is oxidized at the anode of the chip to quinoneimine that is reduced back to pAP at the cathode. The cycling oxidation and reduction of these compounds result in a current producing a characteristic signal that can be related to the concentration of the analyte. The performance of the different steps in the assay was characterized using in vitro synthesized RNA oligonucleotides and then the instrument was used for analysis of 16S rRNA in Escherichia coli extract. The assay time depends on the sensitivity required. Artificial RNA target and 16S rRNA, in amounts ranging from 10(11) to 10(10) molecules, were assayed within 25 min and 4 h, respectively.     

DNA biosensors based on self-assembled carbon nanotubes

DNA biosensors based on self-assembled multi-walled carbon nanotubes (MWNTs) were described in this paper, in which the probe DNA oligonucleotides were immobilized by forming covalent amide bonds between carboxyl groups at the nanotubes and amino groups at the ends of the DNA oligonucleotides. Hybridization between the probe and target DNA oligonucleotides was confirmed by the changes in the voltammetric peak of the indicator of methylene blue. Our results demonstrate that the DNA biosensors based on self-assembled MWNTs had a higher hybridization efficiency compared to those based on random MWNTs. In addition, the developed DNA biosensors also had a high selectivity of hybridization detection.     

Enhanced nucleic acid capture and flow cytometry detection with peptide nucleic acid probes and tunable-surface microparticles

New methods for automated, direct nucleic acid purification and detection are required for the next generation of unattended environmental monitoring devices. In this study we investigated whether tunable-surface bead chemistry and peptide nucleic acids (PNA) could enhance the recovery and detection of intact rRNA in both test tube and automated suspension array hybridization formats. Intact rRNA was easily captured and detected on PNA-coated Lumavidin beads from 0.1 ng total RNA with a 15-min hybridization in pH 7 buffer, representing 1.7 x 10(3) cell equivalents of total RNA. DNA-conjugated beads in pH 5 hybridization buffer required an overnight hybridization to achieve a detectable signal at 0.1 ng target RNA. Standard DNA hybridization conditions (pH 7) were one order of magnitude less sensitive than the tunable-surface (pH 5) condition. The PNA-conjugated particles were 100x more sensitive than the tunable-surface DNA particles in the automated format, with a detection limit of 0.1 ng total RNA. The detection limits for total RNA on PNA-conjugated microparticles is immediately conducive to the detection and characterization of microorganisms in low-biomass environments or to the identification of rare sequences in a complex sample mixture, without using PCR.     

Assessment of methods for covalent binding of nucleic acids to magnetic beads, Dynabeads, and the characteristics of the bound nucleic acids in hybridization reactions.

Dynabeads are magnetic monosized beads with high stability, high uniformity, unique paramagnetic properties, low particle-particle interaction, and high dispersibility. Different reactive groups; hydroxyl, carboxyl and amino groups can be attached to the surface. Several methods for covalent attachment of DNA or oligonucleotides to the beads were investigated. Best coupling yields were obtained by carbodiimide-mediated end-attachment of 5'-phosphate and 5'-NH2 modified nucleic acids to respectively amino and carboxyl beads. The carboxyl beads showed a low degree of non-specific binding, while a better yield of end-attached nucleic acids was obtained using the amino beads. The DNA-beads worked efficiently in hybridization experiments, and the kinetics of hybridization approach those of solution hybridization.     

Specific detection of DNA using quantum dots and magnetic beads for large volume samples

Here we present a sensitive DNA detection protocol using quantum dots (QDs) and magnetic beads (MBs) for large volume samples. In this study, QDs, conjugated with streptavidin, were used to produce fluorescent signals while magnetic beads (MBs) were used to isolate and concentrate the signals. The presence of target DNAs leads to the sandwich hybridization between the functionalized QDs, the target DNAs and the MBs. In fact, the QDs-MBs complex, which is bound using the target DNA, can be isolated and then concentrated. The binding of the QDs to the surface of the MBs was confirmed by confocal microscopy and Cd elemental analysis. It was found that the fluorescent intensity was proportional to concentration of the target DNA, while the presence of non-complementary DNA produced no significant fluorescent signal. In addition, the presence of low copies of target DNAs such as 0.5 pM in large volume samples up to 40 mL was successfully detected by using a magnet-assisted concentration protocol which consequently results in the enhancement of the sensitivity more than 100-fold.     

New tools for oligonucleotide fingerprinting

Oligonucleotide fingerprinting is an attractive, high-throughput complement to tag sequencing methods to determine the spectrum and abundance of genes in cDNA libraries. This method currently relies on the sequential hybridizations of short, radioactively labeled DNA oligonucleotides to clone arrays. Here, we describe a new environment that substantially improves this technology. Fluorescently labeled peptide nucleic acid (PNA) oligonucleotides are used as hybridization probes. Hybridization results are recorded with a large-field, high-resolution laser scanner developed for this purpose. Automated image analysis allows easy handling of large numbers of hybridization images. Signal interference effects, which limit the gridding density in the radioactive approach, are strongly reduced. The sensitivity of the fluorescence detection demonstrated permits the convenient use of nylon membranes. Hybridization data quality is improved, and its generation is substantially accelerated, simplified, and less expensive.     

Fractionation of chromosome 15 with an affinity-based approach using magnetic beads

The two main shortcomings of the state-of-the-art method of sorting chromosomes, specificity and the efficiency of fractionating a significant amount of chromosomes, are addressed by this work in the design of a massively parallel approach using magnetic beads binding to a chromosome-specific DNA probe. In an attempt to isolate human chromosome 15 from a lymphoblastoid cell line, a chromosome 15 centromere-specific DNA probe with a fluorescent tag attached was reacted with the chromosomes. Magnetic beads bound to anti-FITC antibody were reacted with the labeled pool of chromosomes and separated by exposure to a magnetic field. The specificity of the fractionated pool was verified by performing fluorescence in situ hybridization on the isolated pool. The chromosome of interest could be enriched to about 75% within a maximum of 3-4 days, regardless of the amount of material.     

Detection of a single base substitution in a single cell using the LightCycler

For known mutations, real time polymerase chain reaction followed by melting curve analysis, using hybridization probes, is highly sensitive, rapid and an efficient approach to mutation detection. We have used this approach on the LightCycler for the detection of single base mutations in a single cell, without nested PCR. Hybridization probes were designed for two sequences in the BRCA1 gene containing a single base substitution and deletion, respectively. Polymerase chain reactions of small fragments (100-200 bp) containing the probe sequences were optimized using SYBR Green1, before using hybridization probes. The 5'-probes were 3'-labeled with FITC, whereas the 3'-probes, covering the mutation, were 5'-labeled with LC-Red640 (wild type probes) or LC-Red705 (mutant probes). Dual color detection of wild type and mutant sequences in a single tube was tested on single cells. The reaction mix was prepared in reaction capillaries and a single cell, picked by micromanipulation, was added to this mix. The DNA from the cell is released during the 5-min preheating step of the PCR, using the FastStart hybridization kit (Roche). Reproducible results were obtained, without the need of nested PCR. The technique is useful for microdissected tumors and, with other genes, has great potential for pre-implantation diagnosis in IVF and analysis of residual disease in cancer.     

Label-free amplified bioaffinity detection using terahertz wave technology

A new affinity biosensor based on pulsed terahertz (THz) wave technology has been used to monitor binding between biotin and avidin molecules. Amplified detection of avidin-biotin binding is obtained on supported membranes composed of biotin layers on quartz surface, which is modified with octadecanol. Agarose particles are conjugated with avidin and then applied to biotin, which is already bound to the octadecanol quartz surface, the biotin binds to the conjugate rapidly and causes an enhancement of the THz difference signal between biotin and biotin-avidin complexes by a factor greater than eight fold when compared to the same sample without agarose beads. The technique was able to detect less than 10.3 ng/cm2 avidin, thus, giving the THz system a detection capability of sub-thin solid films better than ellipsometry and reflectometry techniques. Further improvement is underway using highly refractive beads together with appropriate surface chemistry. This newly developed method is being saliently optimized for future application, including the detection of DNA hybridization and ligand-analyte affinity binding.     

Immunohistochemistry and in situ hybridization of P-45017 alpha (17 alpha-hydroxylase/17,20-lyase).

Cytochrome P-45017 alpha catalyzes both 17 alpha-hydroxylation and 17,20-side-chain cleavage in steroidogenesis and lies at a key branch point in the pathways of steroid hormone biosynthesis. To obtain information on the precise localization of P-45017 alpha in swine testis, ovary, and adrenal, we undertook the simultaneous detection of P-45017 alpha mRNA and protein by combining immunohistochemistry with in situ hybridization. In situ hybridization was performed on 4% paraformaldehyde-fixed, paraffin-embedded sections by employing either a 39-base oligomer or a cDNA insert (1.7 KB) of porcine testis P-45017 alpha as DNA probe. Immunohistochemical study was performed by employing anti-P-45017 alpha. Hybridization signals were obtained in Leydig cells of the testis, theca interna of the ovarian follicle, and zona fasciculata reticularis cells of the adrenal cortex. Oligonucleotide probing yielded lower background signal than the cDNA probe. No specific signals were obtained in seminiferous tubules of the testis, medulla, and zona glomerulosa of the adrenal, and in membrana granulosa and interstitial cells of the ovary. Hybridization signals were obtained in the cells where immunoreactivity of the enzyme was observed by immunohistochemistry, except for some Leydig cells of the testis and theca interna cells of the ovary in which only immunoreactivity but not hybridization signal was observed. The present study provided detailed information about the precise cellular localization of P-45017 alpha expression at both the protein and mRNA levels in swine adrenal glands and gonads. This approach of simultaneous immunohistochemistry and in situ hybridization analysis of steroidogenic enzymes can be applied in the future to tissues exhibiting abnormal steroid metabolism and should contribute to a better understanding of steroidogenesis.     

Mixed-phase hybridization of short oligodeoxyribonucleotides on microscopic polymer particles: effect of one-base mismatches on duplex stability

Hybridization of short oligonucleotides (10- and 11-mers) to complementary probes immobilized to microscopic polymer particles was quantified by a sandwich type mixed-phase hybridization assay based on a time-resolved fluorometric measurement of a photoluminescent europium(III) chelate from the surface of a single particle. Among the 54 sequences that were studied, 21 were fully complementary to the particle-bound probes, while 33 contained an internal one-base mismatch. The observed affinities were compared to those predicted by the nearest-neighbor model. In addition, various factors, such as the pore size of the particle, the linker structure, the charge type of the probe, and the efficiency of agitation, that might be expected to affect the kinetics of mixed-phase hybridization have been examined.     

DNA hybridization assays using metal-enhanced fluorescence

We describe a new approach to DNA hybridization assays using metal-enhanced fluorescence. Thiolated oligonucleotides were bound to silver particles on a glass substrate. Addition of a complementary fluorescein-labeled oligonucleotide resulted in a dramatic time-dependent 12-fold increase in fluorescence intensity during hybridization. Proximity to silver particles resulted in a decreased fluorescence lifetime. This effect is thought to be the result of enhanced fluorescence from fluorescein near metallic silver particles. Hybridization could thus be measured from the decay kinetics of the emission, which can be measured independently from the emission intensity. These results suggest the use of silver particles as a general approach to measure DNA hybridization as a method to increase the sensitivity of DNA detection.     

Cu@Au alloy nanoparticle as oligonucleotides labels for electrochemical stripping detection of DNA hybridization

Synthesis of the novel Cu@Au alloy nanoparticle and its application in an electrochemical DNA hybridization detection assay is described in this article. We report a low-temperature method for generating core-shell particles consisting of a core of Cu and a thin layer of Au shell that can be readily functionalized with oligonucleotides. Core-shell Cu@Au particles were successfully labeled to a 5'-alkanethiol capped oligonucleotides probe that is related to the colitoxin gene. The DNA genetic sensing assay relies on the electrostatic adsorption of target oligonucleotides onto conducting polypyrrole (PPy) surface at the glassy carbon electrode (GCE), and its hybridization to the alloy particle-oligonucleotides DNA probe. Hybridization events between probe and target were monitored by the release of the copper metal atoms anchored on the hybrids by oxidative metal dissolution and the indirectly determination of the solubilized Cu2+ ions by sensitive anodic stripping voltammetry (ASV). The detection limit is 5.0 pmol l(-1) of target oligonucleotides. The Cu@Au core-shell nanoparticles combining the surface modification properties of Au with the good electrochemical activity of Cu core shows their perspective application in the electrochemical DNA hybridization analysis assay.     

Detection and identification of Staphylococcus aureus using magnetic particle enhanced surface plasmon spectroscopy

In this work, an approach for SPR spectroscopy using the ^liSPR system is examined that combines signal amplification by PCR and magnetic nanoparticles in one injection step. Therefore, the synthesis of PCR products was performed on the beads similar to a solid‐phase PCR, termed PCR‐on‐a‐bead. The functionality of this PCR was proven using an enzymatic assay. For validation the detection of oligonucleotides by SPR, an asymmetric PCR product was investigated. A signal increase upon binding of the PCR product to the specific probes was observed. In addition, surface regeneration of the chip was examined and reuse for at least two times ascertained. Amplification of the SPR signal by magnetic beads was verified but no signal was detected for PCR products immobilized on particles prior to injection.