Library preparation methods for next-generation sequencing: Tone down the bias

Next-generation sequencing (NGS) has caused a revolution in biology. NGS requires the preparation of libraries in which (fragments of) DNA or RNA molecules are fused with adapters followed by PCR amplification and sequencing. It is evident that robust library preparation methods that produce a representative, non-biased source of nucleic acid material from the genome under investigation are of crucial importance. Nevertheless, it has become clear that NGS libraries for all types of applications contain biases that compromise the quality of NGS datasets and can lead to their erroneous interpretation. A detailed knowledge of the nature of these biases will be essential for a careful interpretation of NGS data on the one hand and will help to find ways to improve library quality or to develop bioinformatics tools to compensate for the bias on the other hand. In this review we discuss the literature on bias in the most common NGS library preparation protocols, both for DNA sequencing (DNA-seq) as well as for RNA sequencing (RNA-seq). Strikingly, almost all steps of the various protocols have been reported to introduce bias, especially in the case of RNA-seq, which is technically more challenging than DNA-seq. For each type of bias we discuss methods for improvement with a view to providing some useful advice to the researcher who wishes to convert any kind of raw nucleic acid into an NGS library.     

A Microfluidic DNA Library Preparation Platform for Next-Generation Sequencing

Next-generation sequencing (NGS) is emerging as a powerful tool for elucidating genetic information for a wide range of applications. Unfortunately, the surging popularity of NGS has not yet been accompanied by an improvement in automated techniques for preparing formatted sequencing libraries. To address this challenge, we have developed a prototype microfluidic system for preparing sequencer-ready DNA libraries for analysis by Illumina sequencing. Our system combines droplet-based digital microfluidic (DMF) sample handling with peripheral modules to create a fully-integrated, sample-in library-out platform. In this report, we use our automated system to prepare NGS libraries from samples of human and bacterial genomic DNA. E. coli libraries prepared on-device from 5 ng of total DNA yielded excellent sequence coverage over the entire bacterial genome, with >99% alignment to the reference genome, even genome coverage, and good quality scores. Furthermore, we produced a de novo assembly on a previously unsequenced multi-drug resistant Klebsiella pneumoniae strain BAA-2146 (KpnNDM). The new method described here is fast, robust, scalable, and automated. Our device for library preparation will assist in the integration of NGS technology into a wide variety of laboratories, including small research laboratories and clinical laboratories.     

Protocols for metagenomic DNA extraction and Illumina amplicon library preparation for faecal and swab samples

Next‐generation sequencing (NGS) technology has extraordinarily enhanced the scope of research in the life sciences. To broaden the application of NGS to systems that were previously difficult to study, we present protocols for processing faecal and swab samples into amplicon libraries amenable to Illumina sequencing. We developed and tested a novel metagenomic DNA extraction approach using solid phase reversible immobilization (SPRI) beads on Western Bluebird (Sialia mexicana) samples stored in RNAlater. Compared with the MO BIO PowerSoil Kit, the current standard for the Human and Earth Microbiome Projects, the SPRI‐based method produced comparable 16S rRNA gene PCR amplification from faecal extractions but significantly greater DNA quality, quantity and PCR success for both cloacal and oral swab samples. We furthermore modified published protocols for preparing highly multiplexed Illumina libraries with minimal sample loss and without post‐adapter ligation amplification. Our library preparation protocol was successfully validated on three sets of heterogeneous amplicons (16S rRNA gene amplicons from SPRI and PowerSoil extractions as well as control arthropod COI gene amplicons) that were sequenced across three independent, 250‐bp, paired‐end runs on Illumina's MiSeq platform. Sequence analyses revealed largely equivalent results from the SPRI and PowerSoil extractions. Our comprehensive strategies focus on maximizing efficiency and minimizing costs. In addition to increasing the feasibility of using minimally invasive sampling and NGS capabilities in avian research, our methods are notably not avian‐specific and thus applicable to many research programmes that involve DNA extraction and amplicon sequencing.     

Whole-genome chromatin profiling from limited numbers of cells using nano-ChIP-seq

Chromatin immunoprecipitation (ChIP) combined with high-throughput sequencing (ChIP-seq) has become the gold standard for whole-genome mapping of protein-DNA interactions. However, conventional ChIP protocols necessitate the use of large numbers of cells, and library preparation steps associated with current high-throughput sequencing platforms require substantial amounts of DNA; both of these factors preclude the application of ChIP-seq technology to many biologically important but rare cell types. Here we describe a nano-ChIP-seq protocol that combines a high-sensitivity small-scale ChIP assay and a tailored procedure for generating high-throughput sequencing libraries from scarce amounts of ChIP DNA. In terms of the numbers of cells required, the method provides two to three orders of magnitude of improvement over the conventional ChIP-seq method and the entire procedure can be completed within 4 d.     

The Role of Quality Control in Targeted Next-generation Sequencing Library Preparation

Next-generation sequencing (NGS) is getting routinely used in the diagnosis of hereditary diseases, such as human cardiomyopathies. Hence, it is of utter importance to secure high quality sequencing data, enabling the identification of disease-relevant mutations or the conclusion of neg-ative test results. During the process of sample preparation, each protocol for target enrichment library preparation has its own requirements for quality control (QC); however, there is little evi-dence on the actual impact of these guidelines on resulting data quality. In this study, we analyzed the impact of QC during the diverse library preparation steps of Agilent SureSelect XT target enrichment and Illumina sequencing. We quantified the parameters for a cohort of around 600 sam-ples, which include starting amount of DNA, amount of sheared DNA, smallest and largest frag-ment size of the starting DNA; amount of DNA after the pre-PCR, and smallest and largest fragment size of the resulting DNA;as well as the amount of the final library, the corresponding smallest and largest fragment size, and the number of detected variants. Intriguingly, there is a high tolerance for variations in all QC steps, meaning that within the boundaries proposed in the current study, a considerable variance at each step of QC can be well tolerated without compromising NGS quality.     

Inexpensive Multiplexed Library Preparation for Megabase-Sized Genomes

Whole-genome sequencing has become an indispensible tool of modern biology. However, the cost of sample preparation relative to the cost of sequencing remains high, especially for small genomes where the former is dominant. Here we present a protocol for rapid and inexpensive preparation of hundreds of multiplexed genomic libraries for Illumina sequencing. By carrying out the Nextera tagmentation reaction in small volumes, replacing costly reagents with cheaper equivalents, and omitting unnecessary steps, we achieve a cost of library preparation of $8 per sample, approximately 6 times cheaper than the standard Nextera XT protocol. Furthermore, our procedure takes less than 5 hours for 96 samples. Several hundred samples can then be pooled on the same HiSeq lane via custom barcodes. Our method will be useful for re-sequencing of microbial or viral genomes, including those from evolution experiments, genetic screens, and environmental samples, as well as for other sequencing applications including large amplicon, open chromosome, artificial chromosomes, and RNA sequencing.     

采用诱导环化酶制备Illumina Mate-paired DNA文库

新一代测序技术(NGS)的文库制备方法在基因组的拼装中起着重要作用。但是NGS技术制备的普通DNA文库片段只有500 bp左右,难以满足复杂基因组的从头(de novo)拼装要求。三代测序技术的读长可以达到20 kb,但是其高错误率及测序成本过高使得其又不易推广。因此二代测序的Mate-paired文库制备技术一直在基因组的de novo拼装中扮演着非常重要的角色。目前主流的NGS平台Illumina制备的Mate-paired文库的片段范围只有2~5 kb,为了得到更长的可用于Illumina平台测序的Mate-paired文库,本研究首次整合并优化了Illumina和Roche/454两种测序平台的Mate-paired文库制备技术,采用诱导环化酶来提高基因组长片段DNA的环化效率,成功建立了20 kb Mate-paired文库制备技术,并已将该技术应用于人类基因组20 kb Mate-paired文库制备。该技术为Illumina平台制备长片段Mate-paired库提供了方法指导。     

Comparison of Sample Preparation Methods Used for the Next-Generation Sequencing of Mycobacterium tuberculosis

The advent and widespread application of next-generation sequencing (NGS) technologies to the study of microbial genomes has led to a substantial increase in the number of studies in which whole genome sequencing (WGS) is applied to the analysis of microbial genomic epidemiology. However, microorganisms such as Mycobacterium tuberculosis (MTB) present unique problems for sequencing and downstream analysis based on their unique physiology and the composition of their genomes. In this study, we compare the quality of sequence data generated using the Nextera and TruSeq isolate preparation kits for library construction prior to Illumina sequencing-by-synthesis. Our results confirm that MTB NGS data quality is highly dependent on the purity of the DNA sample submitted for sequencing and its guanine-cytosine content (or GC-content). Our data additionally demonstrate that the choice of library preparation method plays an important role in mitigating downstream sequencing quality issues. Importantly for MTB, the Illumina TruSeq library preparation kit produces more uniform data quality than the Nextera XT method, regardless of the quality of the input DNA. Furthermore, specific genomic sequence motifs are commonly missed by the Nextera XT method, as are regions of especially high GC-content relative to the rest of the MTB genome. As coverage bias is highly undesirable, this study illustrates the importance of appropriate protocol selection when performing NGS studies in order to ensure that sound inferences can be made regarding mycobacterial genomes.     

Automated Gel Size Selection to Improve the Quality of Next-generation Sequencing Libraries Prepared from Environmental Water Samples

Next-generation sequencing of environmental samples can be challenging because of the variable DNA quantity and quality in these samples. High quality DNA libraries are needed for optimal results from next-generation sequencing. Environmental samples such as water may have low quality and quantities of DNA as well as contaminants that co-precipitate with DNA. The mechanical and enzymatic processes involved in extraction and library preparation may further damage the DNA. Gel size selection enables purification and recovery of DNA fragments of a defined size for sequencing applications. Nevertheless, this task is one of the most time-consuming steps in the DNA library preparation workflow. The protocol described here enables complete automation of agarose gel loading, electrophoretic analysis, and recovery of targeted DNA fragments. In this study, we describe a high-throughput approach to prepare high quality DNA libraries from freshwater samples that can be applied also to other environmental samples. We used an indirect approach to concentrate bacterial cells from environmental freshwater samples; DNA was extracted using a commercially available DNA extraction kit, and DNA libraries were prepared using a commercial transposon-based protocol. DNA fragments of 500 to 800 bp were gel size selected using Ranger Technology, an automated electrophoresis workstation. Sequencing of the size-selected DNA libraries demonstrated significant improvements to read length and quality of the sequencing reads.     

Deep-sequencing protocols influence the results obtained in small-RNA sequencing

Second-generation sequencing is a powerful method for identifying and quantifying small-RNA components of cells. However, little attention has been paid to the effects of the choice of sequencing platform and library preparation protocol on the results obtained. We present a thorough comparison of small-RNA sequencing libraries generated from the same embryonic stem cell lines, using different sequencing platforms, which represent the three major second-generation sequencing technologies, and protocols. We have analysed and compared the expression of microRNAs, as well as populations of small RNAs derived from repetitive elements. Despite the fact that different libraries display a good correlation between sequencing platforms, qualitative and quantitative variations in the results were found, depending on the protocol used. Thus, when comparing libraries from different biological samples, it is strongly recommended to use the same sequencing platform and protocol in order to ensure the biological relevance of the comparisons.     

Parallel sample preparation of proteins,from crude samples to crystals ready for MALDI-MS,in an integrated microfluidic system

A microfluidic structure is presented where selective capture of proteins in complex samples, followed by clean-up, enzymatic processing, and MALDI-MS sample preparation of peptides generated, can be performed. The structure uses an affinity column to capture the protein while all other components in the sample are disposed of. The protein of interest is then eluted from the affinity column and captured on a second column on which the enzymatic processing is performed. Salts and hydrophilic contaminants are then removed before the products from the enzymatic reaction are eluted together with a suitable MALDI matrix and the solvent evaporated in a designated MALDI target structure. All steps can be performed automatically in 54 parallel microstructures on a microfluidic compact disc. The process is demonstrated by the selective capture and tryptic digest of recombinant IgG molecules from samples containing other proteins: an excess of bovine serum albumin or spent cell culture media.     

Increased Throughput by Parallelization of Library Preparation for Massive Sequencing

Background

Massively parallel sequencing systems continue to improve on data output, while leaving labor-intensive library preparations a potential bottleneck. Efforts are currently under way to relieve the crucial and time-consuming work to prepare DNA for high-throughput sequencing.

Methodology/Principal Findings

In this study, we demonstrate an automated parallel library preparation protocol using generic carboxylic acid-coated superparamagnetic beads and polyethylene glycol precipitation as a reproducible and flexible method for DNA fragment length separation. With this approach the library preparation for DNA sequencing can easily be adjusted to a desired fragment length. The automated protocol, here demonstrated using the GS FLX Titanium instrument, was compared to the standard manual library preparation, showing higher yield, throughput and great reproducibility. In addition, 12 libraries were prepared and uniquely tagged in parallel, and the distribution of sequence reads between these indexed samples could be improved using quantitative PCR-assisted pooling.

Conclusions/Significance

We present a novel automated procedure that makes it possible to prepare 36 indexed libraries per person and day, which can be increased to up to 96 libraries processed simultaneously. The yield, speed and robust performance of the protocol constitute a substantial improvement to present manual methods, without the need of extensive equipment investments. The described procedure enables a considerable efficiency increase for small to midsize sequencing centers.     

Integration of Wet and Dry Bench Processes Optimizes Targeted Next-generation Sequencing of Low-quality and Low-quantity Tumor Biopsies

All next-generation sequencing (NGS) procedures include assays performed at the laboratory bench ("wet bench") and data analyses conducted using bioinformatics pipelines ("dry bench"). Both elements are essential to produce accurate and reliable results, which are particularly critical for clinical laboratories. Targeted NGS technologies have increasingly found favor in oncology applications to help advance precision medicine objectives, yet the methods often involve disconnected and variable wet and dry bench workflows and uncoordinated reagent sets. In this report, we describe a method for sequencing challenging cancer specimens with a 21-gene panel as an example of a comprehensive targeted NGS system. The system integrates functional DNA quantification and qualification, single-tube multiplexed PCR enrichment, and library purification and normalization using analytically-verified, single-source reagents with a standalone bioinformatics suite. As a result, accurate variant calls from low-quality and low-quantity formalin-fixed, paraffin-embedded (FFPE) and fine-needle aspiration (FNA) tumor biopsies can be achieved. The method can routinely assess cancer-associated variants from an input of 400 amplifiable DNA copies, and is modular in design to accommodate new gene content. Two different types of analytically-defined controls provide quality assurance and help safeguard call accuracy with clinically-relevant samples. A flexible "tag" PCR step embeds platform-specific adaptors and index codes to allow sample barcoding and compatibility with common benchtop NGS instruments. Importantly, the protocol is streamlined and can produce 24 sequence-ready libraries in a single day. Finally, the approach links wet and dry bench processes by incorporating pre-analytical sample quality control results directly into the variant calling algorithms to improve mutation detection accuracy and differentiate false-negative and indeterminate calls. This targeted NGS method uses advances in both wetware and software to achieve high-depth, multiplexed sequencing and sensitive analysis of heterogeneous cancer samples for diagnostic applications.     

A simple,rapid, efficient and inexpensive strategy for sequencing clones from cDNA libraries

In this report, we describe a simple, rapid, efficient and inexpensive strategy for sequencing inserted DNAs from clones of cDNA or gDNA libraries. This strategy uses PCR products directly amplified from transformed bacterial colonies, with universal primers within the vector. The method can be applied for sequencing cDNA or gDNA libraries with up to 4 ∼ 5 kb insert sizes, without overnight liquid culture or plasmid DNA preparation steps. We successfully used this method to analyze clones from full-length, enriched cDNA libraries. Although simple, following this strategy will significantly help researchers to avoid unnecessary steps in the analysis of a cDNA library.     

Evaluation of a transposase protocol for rapid generation of shotgun high-throughput sequencing libraries from nanogram quantities of DNA

Construction of DNA fragment libraries for next-generation sequencing can prove challenging, especially for samples with low DNA yield. Protocols devised to circumvent the problems associated with low starting quantities of DNA can result in amplification biases that skew the distribution of genomes in metagenomic data. Moreover, sample throughput can be slow, as current library construction techniques are time-consuming. This study evaluated Nextera, a new transposon-based method that is designed for quick production of DNA fragment libraries from a small quantity of DNA. The sequence read distribution across nine phage genomes in a mock viral assemblage met predictions for six of the least-abundant phages; however, the rank order of the most abundant phages differed slightly from predictions. De novo genome assemblies from Nextera libraries provided long contigs spanning over half of the phage genome; in four cases where full-length genome sequences were available for comparison, consensus sequences were found to match over 99% of the genome with near-perfect identity. Analysis of areas of low and high sequence coverage within phage genomes indicated that GC content may influence coverage of sequences from Nextera libraries. Comparisons of phage genomes prepared using both Nextera and a standard 454 FLX Titanium library preparation protocol suggested that the coverage biases according to GC content observed within the Nextera libraries were largely attributable to bias in the Nextera protocol rather than to the 454 sequencing technology. Nevertheless, given suitable sequence coverage, the Nextera protocol produced high-quality data for genomic studies. For metagenomics analyses, effects of GC amplification bias would need to be considered; however, the library preparation standardization that Nextera provides should benefit comparative metagenomic analyses.     

Non-SELEX: selection of aptamers without intermediate amplification of candidate oligonucleotides

Aptamers are typically selected from libraries of random DNA (or RNA) sequences through systematic evolution of ligands by exponential enrichment (SELEX), which involves several rounds of alternating steps of partitioning of candidate oligonucleotides and their PCR amplification. Here we describe a protocol for non-SELEX selection of aptamers--a process that involves repetitive steps of partitioning with no amplification between them. Non-equilibrium capillary electrophoresis of equilibrium mixtures (NECEEM), which is a highly efficient affinity method, is used for partitioning. NECEEM also facilitates monitoring of bulk affinity of enriched libraries at every step of partitioning and screening of individual clones for their affinity to the target. NECEEM allows all clones to be screened prior to sequencing, so that only clones with suitable binding parameters are sequenced. The entire protocol can be completed in 1 wk, whereas conventional SELEX protocols take several weeks even in a specialized industrial facility.     

Sequencing bias: comparison of different protocols of MicroRNA library construction

Background  

MicroRNAs(miRNAs) are 18-25 nt small RNAs playing critical roles in many biological processes. The majority of known miRNAs were discovered by conventional cloning and a Sanger sequencing approach. The next-generation sequencing (NGS) technologies enable in-depth characterization of the global repertoire of miRNAs, and different protocols for miRNA library construction have been developed. However, the possible bias between the relative expression levels and sequences introduced by different protocols of library preparation have rarely been explored.     

Genome Wide Sampling Sequencing for SNP Genotyping: Methods,Challenges and Future Development

Genetic polymorphisms, particularly single nucleotide polymorphisms (SNPs), have been widely used to advance quantitative, functional and evolutionary genomics. Ideally, all genetic variants among individuals should be discovered when next generation sequencing (NGS) technologies and platforms are used for whole genome sequencing or resequencing. In order to improve the cost-effectiveness of the process, however, the research community has mainly focused on developing genome-wide sampling sequencing (GWSS) methods, a collection of reduced genome complexity sequencing, reduced genome representation sequencing and selective genome target sequencing. Here we review the major steps involved in library preparation, the types of adapters used for ligation and the primers designed for amplification of ligated products for sequencing. Unfortunately, currently available GWSS methods have their drawbacks, such as inconsistency in the number of reads per sample library, the number of sites/targets per individual, and the number of reads per site/target, all of which result in missing data. Suggestions are proposed here to improve library construction, genotype calling accuracy, genome-wide marker density and read mapping rate. In brief, optimized GWSS library preparation should generate a unique set of target sites with dense distribution along chromosomes and even coverage per site across all individuals.     

Cross-platform compatibility of Hi-Plex,a streamlined approach for targeted massively parallel sequencing

Although per-base sequencing costs have decreased during recent years, library preparation for targeted massively parallel sequencing remains constrained by high reagent cost, limited design flexibility, and protocol complexity. To address these limitations, we previously developed Hi-Plex, a polymerase chain reaction (PCR) massively parallel sequencing strategy for screening panels of genomic target regions. Here, we demonstrate that Hi-Plex applied with hybrid adapters can generate a library suitable for sequencing with both the Ion Torrent and the TruSeq chemistries and that adjusting primer concentrations improves coverage uniformity. These results expand Hi-Plex capabilities as an accurate, affordable, flexible, and rapid approach for various genetic screening applications.