Miniaturization of gene transfection assays in 384- and 1536-well microplates

The miniaturization of gene transfer assays to either 384- or 1536-well plates greatly economizes the expense and allows much higher throughput when transfecting immortalized and primary cells compared with more conventional 96-well assays. To validate the approach, luciferase and green fluorescent protein (GFP) reporter gene transfer assays were developed to determine the influence of cell seeding number, transfection reagent to DNA ratios, transfection time, DNA dose, and luciferin dose on linearity and sensitivity. HepG2, CHO, and NIH 3T3 cells were transfected with polyethylenimine (PEI)–DNA in both 384- and 1536-well plates. The results established optimal transfection parameters in 384-well plates in a total assay volume of 35 μl and in 1536-well plates in a total assay volume of 8 μl. A luciferase assay performed in 384-well plates produced a Z′ score of 0.53, making it acceptable for high-throughput screening. Primary hepatocytes were harvested from mouse liver and transfected with PEI DNA and calcium phosphate DNA nanoparticles in 384-well plates. Optimal transfection of primary hepatocytes was achieved on as few as 250 cells per well in 384-well plates, with CaPO₄ proving to be 10-fold more potent than PEI.     

Purification of polyethylenimine polyplexes highlights the role of free polycations in gene transfer

BACKGROUND: Nonviral vectors based on polyethylenimine (PEI) usually contain an excess of PEI that is not complexed to DNA. Since unbound PEI contributes to cellular and systemic toxicity, purification of polyplexes from unbound PEI is desirable. METHODS: Size exclusion chromatography (SEC) was used to purify PEI polyplexes of free PEI. Transfection properties of purified polyplexes and the effect of free PEI on gene delivery were studied in vitro and in vivo after systemic application into mice. RESULTS: SEC did not change the size and zeta-potential of polyplexes. Independent of the amount of PEI used for complex formation, purified PEI polyplexes had the same final PEI nitrogen/DNA phosphate ratio of 2.5. Notably, purified PEI polyplexes demonstrated low cellular and systemic toxicity. High transfection efficiency was achieved with purified polyplexes at high DNA concentrations (8-15 microg/ml). At low DNA concentrations (2-4 microg/ml) gene transfer with purified particles was less efficient than with polyplexes containing free PEI both in vitro and in vivo. Mechanistic studies showed that free PEI partly blocked cellular association of DNA complexes but was essential for the following intracellular gene delivery. Adding free PEI to cells treated with purified particles with a delay of up to 4 h resulted in significantly enhanced transfection efficiency compared with non-purified particles or purified particles without free PEI. CONCLUSIONS: This study presents an efficient method to remove free PEI from PEI polyplexes by SEC. Our results from transfection experiments demonstrate that free PEI substantially contributes to efficient gene expression but also mediates toxic effects in a dose-dependent manner. Purified polyplexes without free PEI have to be applied at increased concentrations to achieve high transfection levels, but exhibit a greatly improved toxicity profile.     

Role of biophysical parameters on ex vivo and in vivo gene transfer to the airway epithelium by polyethylenimine/albumin complexes

Efficient gene transfer to the airways by nonviral vectors is a function of different parameters, among which the size and the charge of the transfecting particles. The aim of this study was to determine the transfection efficiency of polyethylenimine (PEI)/albumin polyplexes in ex vivo and in vivo models of respiratory epithelium and to correlate it with biophysical characteristics of the particles. Complexes were obtained by adding different amounts of human serum albumin (HSA) to PEI polyplexes preformed in saline. The presence of HSA caused the formation of bigger and more negative polyplexes and increased PEI transfection efficiency in primary respiratory epithelial cells by 4-6-fold. For in vivo administration to the lung, PEI polyplexes were formed in water and optimized with respect to the N/ P ratio. PEI/pC-Luc complexes gave the highest luciferase expression at N/ P 15 when administered through the trachea. At this N/ P ratio, the size and the surface charge of albumin-containing polyplexes were not different as compared with plain PEI polyplexes. Formulation of PEI polyplexes in the presence of HSA or murine serum albumin (MSA) resulted in a 2-fold increase in luciferase expression. In mice treated with PEI or PEI/MSA polyplexes containing the nuclear beta-gal gene, X-gal staining revealed that transfected cells localized at the bronchiolar epithelium and that PEI/MSA transfected four times as many cells as PEI ( p < 0.05). Finally, double administration of PEI/MSA polyplexes resulted in a further enhancement of transfection of the lung. Our data show that serum albumin enhances PEI-mediated gene transfer to airway epithelial cells in vivo, likely facilitating the uptake of polyplexes, and indicate that this formulation would fulfill the requirement of repeated administration, as necessary in chronic lung diseases like cystic fibrosis.     

C- versus N-terminally linked melittin-polyethylenimine conjugates: the site of linkage strongly influences activity of DNA polyplexes

BACKGROUND: One major barrier limiting the transfection efficiency of polyplexes is poor endosomal release, especially when small particles are applied. In an approach to overcome this barrier, covalent attachment of the membrane-active peptide all-(L)-melittin to polyethylenimine (PEI) polyplexes was found to enhance gene transfer efficiency. METHODS: The N-terminus of natural all-(L)- or non-immunogenic all-(D)-melittin was covalently coupled to PEI. In addition, two different all-(D)-melittin conjugates were synthesized, with PEI covalently attached to either the C-terminus (C-mel-PEI) or the N-terminus of melittin (N-mel-PEI). Melittin-PEI polyplexes with particle sizes < 150 nm were generated in HEPES-buffered glucose and tested in transfection experiments. The membrane lytic activities of conjugates and polyplexes were analyzed at neutral and endosomal pH. RESULTS: All-(D)-melittin conjugates mediated enhanced gene expression similar to the natural all-(L)-stereoisomer, with up to 160-fold higher luciferase activity than unmodified PEI. The site of melittin linkage strongly influenced the membrane-destabilizing activities of both conjugates and polyplexes. C-mel-PEI was highly lytic at neutral pH and therefore elevated doses of C-mel-PEI polyplexes induced high toxicity. In contrast, N-mel-PEI was less lytic at neutral pH but retained higher lytic activity than C-mel-PEI at endosomal pH. This apparently promoted better endosomal release of N-mel-PEI polyplexes resulting in efficient gene delivery in different cell lines. CONCLUSIONS: The high potency of C-mel-PEI to destabilize membranes at neutral pH is presumably due to a reported destabilization mechanism proceeding through membrane insertion of the peptide. In contrast, N-mel-PEI is supposed to induce lysis by insertion-independent pore formation according to the toroidal pore model.     

FuGENE 6 Transfection Reagent: the gentle power

FuGENE 6 Transfection Reagent has been commercially available since 1997. Since that time, its popularity has increased due to its ease of use, minimal to no cytotoxicity, and the high level of transfection in many different cell lines. FuGENE 6 Transfection Reagent is gentle on the cells. Adherent cells can be trypsinized and transfected by the DNA:FuGENE 6 reagent complex prior to plating, making it a strong candidate for high throughput applications. Additionally, low cell numbers can be transfected in 96-well plates. As with most reagents, the complex formation step is critical and special handling is required because the reagent is supplied in 80% ethanol. For example, contact with plastic must be avoided as inhibitors of transfection can leach from some plastics. We investigated parameters that have been reported to affect the transfection efficiency including the use of common antibiotics, passage level of the cells, and length of time for complex formation. These parameters are often cell line dependent and can be optimized to increase transfection efficiency for a specific cell line.     

Nanoscale characterization coupled to multi-parametric optimization of Hi5 cell transient gene expression

Polyethylenimine (PEI)-based transient gene expression (TGE) is nowadays a well-established methodology for rapid protein production in mammalian cells, but it has been used to a much lower extent in insect cell lines. A fast and robust TGE methodology for suspension Hi5 (Trichoplusia ni) cells is presented. Significant differences in size and morphology of DNA:PEI polyplexes were observed in the different incubation solutions tested. Moreover, minimal complexing time (&lt; 1 min) between DNA and PEI in 150 mM NaCl solution provided the highest transfection efficiency. Nanoscopic characterization by means of cryo-EM revealed that DNA:PEI polyplexes up to 300–400 nm were the most efficient for transfection. TGE optimization was performed using eGFP as model protein by means of the combination of advanced statistical designs. A global optimal condition of 1.5 × 10⁶ cell/mL, 2.1 μg/mL of DNA, and 9.3 μg/mL PEI was achieved through weighted-based optimization of transfection, production, and viability responses. Under these conditions, a 60% transfection and 0.8 μg/10⁶ transfected cell·day specific productivity were achieved. The TGE protocol developed for Hi5 cells provides a promising baculovirus-free and worthwhile approach to produce a wide variety of recombinant proteins in a short period of time.

     

Cost-effective gene transfection by DNA compaction at pH 4.0 using acidified,long shelf-life polyethylenimine

Introduction of genetic material into cells is an essential prerequisite for current research in molecular cell biology. Although transfection with commercially available reagents results in excellent gene expression, their high costs are obstacles to experimentation with a large number or large scales of transfection. The cationic polymer linear-polyethylenimine (MW 25,000) (PEI), one of the most cost-effective vehicles, facilitates DNA compaction by polyplex formation, which leads to efficient delivery of DNA into cells by endocytosis. However, the use of PEI is still limited because of substantial cytotoxicity and intolerable deterioration in transfection efficiency by its low stability. Here, we show that acidification of PEI is important for its transfection activity. Dissolving PEI powder in 0.2N HCl confers a long shelf-life for PEI storage at 4 and −80 °C, and the polyplex formation of plasmid DNA with PEI is optimized in lactate-buffered saline at pH 4.0. Furthermore, changing the culture medium at 8–12 h posttransfection can minimize the cytotoxicity of PEI without sacrificing the high transfection efficiency comparable to that of commercial reagents. The cost per test using acidified PEI is drastically reduced to approximately 1:10,000, compared with commercial reagents. Thus, we conclude that acidification of PEI satisfactorily accomplishes cost-effective, high-efficiency transfection.     

Scalable 96-well Plate Based iPSC Culture and Production Using a Robotic Liquid Handling System

Continued advancement in pluripotent stem cell culture is closing the gap between bench and bedside for using these cells in regenerative medicine, drug discovery and safety testing. In order to produce stem cell derived biopharmaceutics and cells for tissue engineering and transplantation, a cost-effective cell-manufacturing technology is essential. Maintenance of pluripotency and stable performance of cells in downstream applications (e.g., cell differentiation) over time is paramount to large scale cell production. Yet that can be difficult to achieve especially if cells are cultured manually where the operator can introduce significant variability as well as be prohibitively expensive to scale-up. To enable high-throughput, large-scale stem cell production and remove operator influence novel stem cell culture protocols using a bench-top multi-channel liquid handling robot were developed that require minimal technician involvement or experience. With these protocols human induced pluripotent stem cells (iPSCs) were cultured in feeder-free conditions directly from a frozen stock and maintained in 96-well plates. Depending on cell line and desired scale-up rate, the operator can easily determine when to passage based on a series of images showing the optimal colony densities for splitting. Then the necessary reagents are prepared to perform a colony split to new plates without a centrifugation step. After 20 passages (~3 months), two iPSC lines maintained stable karyotypes, expressed stem cell markers, and differentiated into cardiomyocytes with high efficiency. The system can perform subsequent high-throughput screening of new differentiation protocols or genetic manipulation designed for 96-well plates. This technology will reduce the labor and technical burden to produce large numbers of identical stem cells for a myriad of applications.     

Effective delivery of siRNA to transgenic rice cells for enhanced transfection using PEI-based polyplexes

Various polymers were used as transfection factors for small interfering RNA (siRNA) to effectively suppress human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig) gene in transgenic rice cells. Five kinds of polymers (PEI, PVA, PVP, and 8 and 20 kDa PEGs) were applied for delivery of siRNA with lipofectamine used as a control. In the cytotoxicity test, all polymers except 8 kDa PEG showed nontoxicity in relation to cell viability. For transfection efficiency, polyplexes composed of siRNA and PEG (20 kDa) did not significantly reduce production of intracellular hCTLA4Ig. On the other hand, siRNA + PEI polyplexes showed the most effective suppression efficiency with regards to production of intracellular hCTLA4Ig among all other polyplexes (PVA, PVP, and PEG (8 kDa)). Effects of molecular weight ratios of siRNA:PEI were investigated to obtain optimal transfection efficiency and avoid excessive damage to cells. PEI-based polyplexes with a 1:10 ratio of siRNA:PEI reduced production of intracellular hCTLA4Ig up to 70.6% without alteration of cell viability. These results demonstrate that PEI-based polyplexes are easy to prepare, inexpensive, non-toxic, and effective to deliver siRNA to transgenic plant cell cultures.     

Magnetic, microplate-format plasmid isolation protocol for high-yield, sequencing-grade DNA

We have developed a rapid, microplate-format plasmid isolation procedure to purify sequencing-grade DNA templates for high-throughput DNA sequencing operations. A modified lysozyme/boiling method is used to produce a plasmid-containing supernatant that is then purified by iron bead capture. After binding, the beads are pelleted in a magnetic field, washed and the DNA eluted in water. The method yields up to 10 micrograms plasmid DNA from a 1-mL overnight culture in a deep-well microplate. The procedure is suitable for large-scale experiments, amenable to automation and does not require expensive reagents or equipment. The entire protocol can be completed in as little as 2 h, and one technician with a 96-well pipetting station can process up to 48 plates per day. This protocol is ideal for any high-throughput operation in which template quantity, quality and reproducibility are of primary importance.     

Controlled delivery of plasmid DNA and siRNA to intracellular targets using ketalized polyethylenimine

A new polyethylenimine (PEI)-derived biodegradable polymer was synthesized as a nonviral gene carrier. Branches of PEI were ketalized, and capabilities of nucleic acid condensation and delivery efficiency of the modified polymers were compared with ones of unketalized PEI. Ketalized PEI was able to efficiently compact both plasmid DNA and siRNA into nucleic acids/ketalized PEI polyplexes with a range of 80-200 nm in diameter. Nucleic acids were efficiently dissociated from the polyplexes made of ketalized PEI upon hydrolysis. In vitro study also demonstrated that ketalization enhanced transfection efficiency of the polyplexes while reducing cytotoxicity, even at high N/ P ratios. Interestingly, transfection efficiency was found to be inversely proportional to molecular weights of ketalized PEI, while RNA interference was observed in the opposite way. This study implies that selective delivery of plasmid DNA and siRNA to the nucleus and the cytoplasm can be achieved by tailoring the structures of polymeric gene carriers.     

Cross-linked polyethylenimine as potential DNA vector for gene delivery with high efficiency and low cytotoxicity

Polyethylenimine (PEI) has been known as an efficient gene carrier with the highest cationiccharge potential.High transfection efficiency of PEI,along with its cytotoxicity,strongly depends on itsmolecular weight.To enhance its gene delivery efficiency and minimize cytotoxicity,we have synthesizedsmall cross-linked PEI with biodegradable linkages and evaluated their transfection efficiencies in vitro.Inthis study,branched PEI with a molecular weight of 800 Da was cross-linked by small diacrylate[1,4-butanediol diacrylate or ethyleneglycol dimethacrylate (EGDMA)] for 2-6 h.The efficiencies of thecross-linked PEI in in vitro transfection of plasmid DNA containing enhanced green fluorescent protein(EGFP) reporter gene were assessed in melanoma B 16F10 cell line and other cell lines.Flow cytometrywas used to quantify the cellular entry efficiency of plasmid and the transgene expression level.Thecytotoxicities of the cross-linked PEI in these cells were evaluated by MTT assay.EGDMA-PEI 800-4h,atypical cross-linked PEI reported here,mediated a more efficient expression of reporter gene than thecommercially available 25-kDa branched PEI control,and resulted in a 9-fold increase in gene deliveryin B16F10 cells and a 16-fold increase in 293T cells,while no cytotoxicity was found at the optimizedcondition for gene delivery.Furthermore,the transfection activity of polyplexes was preserved in thepresence of serum proteins.     

Galactose-poly(ethylene glycol)-polyethylenimine for improved lung gene transfer

Polyethylenimine (PEI) is a potential gene transfer agent, but is limited by its poor transfection efficiency in vivo due to poor solubility and stability, pronounced toxicity and non-specific interaction with target cells. To improve its pulmonary gene transfection property, galactose (whose binding lectins are abundantly expressed in the lung) was selected as a ligand to improve the binding and uptake of the modified PEI/pDNA (plasmid DNA) polyplexes into lung cells. A novel protocol was developed to synthesize galactose-polyethylenglycol (PEG)-PEI copolymers. The resulting galactose-PEG-PEI/pDNA polyplexes showed improved solubility, stability, and reduced toxicity. Compared with that obtained by PEI/pDNA at a N/P ratio of 6, the transfection efficiency of 1% galactose-PEG-PEI/pDNA polyplexes at the N/P ratio of 36 was 4.5- and 11.6-fold in the A549 cell line and in mice lung, respectively. These data taken suggest that galactose-PEG-PEI may be a promising pulmonary gene delivery system.     

Peptide-mediated RNA delivery: a novel approach for enhanced transfection of primary and post-mitotic cells

Synthetic vectors were evaluated for their ability to mediate efficient mRNA transfection. Initial results indicated that lipoplexes, but not polyplexes based on polyethylenimine (PEI, 25 and 22 kDa), poly(L-lysine) (PLL, 54 kDa) or dendrimers, mediated efficient translation of mRNA in B16-F10 cells. Significant mRNA transfection was achieved by lipoplex delivery in quiescent (passage 0) human umbilical vein endothelial cells (HUVEC), and by passage 4, 10.7% of HUVEC were transfected compared to 0.84% with DNA. Lack of expression with PEI 25 kDa/mRNA or PLL 54 kDa/mRNA in a cell-free translation assay and following cytoplasmic injection into Rat1 cells indicated that these polyplexes were too stable to release mRNA. In contrast, polyplexes formed using smaller PEI 2 kDa and PLL 3.4 kDa gave 5-fold greater expression in B16-F10 cells compared to DOTAP, but were dependent on chloroquine for transfection activity. Endosomolytic activity was incorporated by conjugating PEI 2 kDa to melittin and resulting PEI 2 kDa-melittin/mRNA polyplexes mediated high transfection levels in HeLa cells (31.1 +/- 4.1%) and HUVEC (58.5 +/- 2.9%) in the absence of chloroquine, that was potentiated to 52.2 +/- 2.7 and 71.6 +/- 1.7%, respectively, in the presence of chloroquine. These results demonstrate that mRNA polyplexes based on peptide-modified low molecular weight polycations can possess versatile properties including endosomolysis that should enable efficient non-viral mRNA transfection of quiescent and post-mitotic cells.     

Disulfide cross-linked polyethylenimines (PEI) prepared via thiolation of low molecular weight PEI as highly efficient gene vectors

Ring-opening reaction of low molecular weight polyethylenimine with an Mw of 800 Da (800 Da PEI) with methylthiirane produced thiolated polyethylenimine (PEI-SHX ). The thiolation degree X, which is the average number of thiol groups on a PEI molecule, was readily adjusted by the methylthiirane/PEI ratio. Oxidation of the thiolated PEIs with DMSO afforded disulfide cross-linked PEIs (PEI-SSX ). The molecular weights of PEI-SS X were estimated by viscosity measurement to be 7100, 8000, and 8400 for X=2.6, 6.5, and 9.4, respectively. The PEI-SSX series can bind and condense plasmid DNAs effectively forming nanosized polyplexes. The size of dry polyplexes is less than 100 nm on the TEM pictures. In solution, the size of the polyplexes was measured by DLS to be about 400 nm. In vitro experiments showed that the PEI-SS X series have a lower cytotoxicity and higher gene transfection efficiency compared with the high molecular weight PEI with Mw of 25 KDa. The presence of fetal bovine serum did not decrease the transfection efficiency. The results proved the hypothesis that reductively degradable disulfide-containing PEIs could possesses simultaneously higher gene transfection efficiency and lower cytotoxicity than the nondegradable ones.     

Physiochemical properties of low and high molecular weight poly(ethylene glycol)-grafted poly(ethylene imine) copolymers and their complexes with oligonucleotides

Inefficient delivery of antisense oligonucleotides (AOs) to target cell nuclei remains as the foremost limitation to their usefulness. Copolymers of cationic poly(ethylene imine) (PEI) and poly(ethylene glycol) (PEG) have been well-studied for delivery of plasmids. However, the properties of PEG-PEI-AO polyplexes have not been comprehensively investigated. Therefore, we synthesized a series of PEG-PEI copolymers and evaluated their physiochemical properties alone and when complexed with AO. The M(w) of PEG was found to be the main determinant of polyplex size, via its influence on particle aggregation. DLS measurements showed that when PEG5000 was grafted to PEI2K and PEI25K, polyplex diameters were extremely small (range 10-90 nm) with minimal aggregation. In contrast, when PEG550 was grafted to PEI2K and PEI25K, polyplexes appeared as much larger aggregates (approximately 250 nm). As expected, the surface charge (zeta potential) was higher for polyplexes containing PEI25K than those containing PEI2K, but decreased with increased levels of PEG grafting. Surprisingly, within the physiological range (pH 7.5-5), the buffering capacity of all copolymers was nearly equivalent to that of unsubstituted PEI2K or PEI25K, and was barely influenced by PEGylation. The stability of polyplexes was evaluated using a heparin polyanion competition assay. Unexpectedly, polyplexes containing PEI2K showed stability equal to or greater than that of PEI25K polyplexes. The level of PEG grafting also had a dramatic effect on polyplex stability. The relationships established between molecular formulations and polyplex size, aggregation, surface charge, and stability should provide a useful guide for future studies aimed at optimizing polymer-mediated AO delivery in cell and animal studies. A summary of the relationships between polyplex structures and recent studies of their transfection capacity is provided.     

Calfection: a novel gene transfer method for suspension cells

We have developed a novel method called Calfection for gene delivery to and protein expression from suspension-cultivated mammalian cells. Plasmid DNA was simply diluted into a calcium chloride solution and then added to the cell culture for transfection. We evaluated and optimized this approach using suspension-adapted HEK293 cells grown in 12-well plates that were shaken on an orbital shaker. Highest expression levels were obtained when cells were transfected at a density of 5x10(5) cells/ml in the presence of 9 mM calcium and 5 microg/ml of plasmid DNA while maintaining a culture pH of 7.6 at the time of transfection. Suspension-adapted BHK 21 and CHO DG 44 cells could also be transfected using this method. Calfection differs from the widely known calcium phosphate coprecipitation technique. The physico-chemical composition of the DNA interacting complexes is not yet known. The transfection cocktail, DNA in a calcium chloride solution, remained highly efficient during long-term storage at temperatures ranging from room temperature to -80 degrees C. In contrast, calcium phosphate-DNA cocktails are only efficient for gene transfer when prepared fresh. Furthermore, passing the calcium-plasmid DNA mixture through a 0.2-microm filter did not compromise protein expression, whereas calcium phosphate-DNA coprecipitates were retained by the filter. High protein expression levels, a limited number of manipulations and the possibility to filter the cocktail make the Calfection approach suitable for both large-scale transfection in bioreactors and for high-throughput transfection experiments in microtiter plates.     

Low molecular weight linear polyethylenimine-b-poly(ethylene glycol)-b-polyethylenimine triblock copolymers: synthesis, characterization, and in vitro gene transfer properties

Novel ABA triblock copolymers consisting of low molecular weight linear polyethylenimine (PEI) as the A block and poly(ethylene glycol) (PEG) as the B block were prepared and evaluated as polymeric transfectant. The cationic polymerization of 2-methyl-2-oxazoline (MeOZO) using PEG-bis(tosylate) as a macroinitiator followed by acid hydrolysis afforded linear PEI-PEG-PEI triblock copolymers with controlled compositions. Two copolymers, PEI-PEG-PEI 2100-3400-2100 and 4000-3400-4000, were synthesized. Both copolymers were shown to interact with and condense plasmid DNA effectively to give polymer/DNA complexes (polyplexes) of small sizes (<100 nm) and moderate zeta-potentials (approximately +10 mV) at polymer/plasmid weight ratios > or =1.5/1. These polyplexes were able to efficiently transfect COS-7 cells and primary bovine endothelial cells (BAECs) in vitro. For example, PEI-PEG-PEI 4000-3400-4000 based polyplexes showed a transfection efficiency comparable to polyplexes of branched PEI 25000. The transfection activity of polyplexes of PEI-PEG-PEI 4000-3400-4000 in BAECs using luciferase as a reporter gene was 3-fold higher than that for linear PEI 25000/DNA formulations. Importantly, the presence of serum in the transfection medium had no inhibitive effect on the transfection activity of the PEI-PEG-PEI polyplexes. These PEI-PEG-PEI triblock copolymers displayed also an improved safety profile in comparison with high molecular weight PEIs, since the cytotoxicity of the polyplex formulations was very low under conditions where high transgene expression was found. Therefore, linear PEI-PEG-PEI triblock copolymers are an attractive novel class of nonviral gene delivery systems.     

Calcium phosphate transfection generates mammalian recombinant cell lines with higher specific productivity than polyfection

Transfection with polyethylenimine (PEI) was evaluated as a method for the generation of recombinant Chinese hamster ovary (CHO DG44) cell lines by direct comparison with calcium phosphate-DNA coprecipitation (CaPO4) using both green fluorescent protein (GFP) and a monoclonal antibody as reporter proteins. Following transfection with a GFP expression vector, the proportion of GFP-positive cells as determined by flow cytometry was fourfold higher for the PEI transfection as compared to the CaPO4 transfection. However, the mean level of transient GFP expression for the cells with the highest level of fluorescence was twofold greater for the CaPO4 transfection. Fluorescence in situ hybridization on metaphase chromosomes from pools of cells grown under selective pressure demonstrated that plasmid integration always occurred at a single site regardless of the transfection method. Importantly, the copy number of integrated plasmids was measurably higher in cells transfected with CaPO4. The efficiency of recombinant cell line recovery under selective pressure was fivefold higher following PEI transfection, but the average specific productivity of a recombinant antibody was about twofold higher for the CaPO4-derived cell lines. Nevertheless, no difference between the two transfection methods was observed in terms of the stability of protein production. These results demonstrated the feasibility of generating recombinant CHO-derived cell lines by PEI transfection. However, this method appeared inferior to CaPO4 transfection with regard to the specific productivity of the recovered cell lines.     

Poly(ethylene oxide) grafted with short polyethylenimine gives DNA polyplexes with superior colloidal stability, low cytotoxicity, and potent in vitro gene transfection under serum conditions

Poly(ethylene oxide) grafted with 1.8 kDa branched polyethylenimine (PEO-g-PEI) copolymers with varying compositions, that is, PEO(13k)-g-10PEI, PEO(24k)-g-10PEI, and PEO(13k)-g-22PEI, were prepared and investigated for in vitro nonviral gene transfer. Gel electrophoresis assays showed that PEO(13k)-g-10PEI, PEO(24k)-g-10PEI, and PEO(13k)-g-22PEI could completely inhibit DNA migration at an N/P ratio of 4/1, 4/1, and 3/1, respectively. Dynamic light scattering (DLS) and zeta potential measurements revealed that all three graft copolymers were able to effectively condense DNA into small-sized (80-245 nm) particles with moderate positive surface charges (+7.2 ～ +24.1 mV) at N/P ratios ranging from 5/1 to 40/1. The polyplex sizes and zeta-potentials intimately depended on PEO molecular weights and PEI graft densities. Notably, unlike 25 kDa PEI control, PEO-g-PEI polyplexes were stable against aggregation under physiological salt as well as 20% serum conditions due to the shielding effect of PEO. MTT assays in 293T cells demonstrated that PEO-g-PEI polyplexes had decreased cytotoxicity with increasing PEO molecular weights and decreasing PEI graft densities, wherein low cytotoxicities (cell viability >80%) were observed for polyplexes of PEO(13k)-g-22PEI, PEO(13k)-g-10PEI, and PEO(24k)-g-10PEI up to an N/P ratio of 20/1, 30/1, and 40/1, respectively. Interestingly, in vitro transfection results showed that PEO(13k)-g-10PEI polyplexes have the best transfection activity. For example, PEO(13k)-g-10PEI polyplexes formed at an N/P ratio of 20/1, which were essentially nontoxic (100% cell viability), displayed over 3- and 4-fold higher transfection efficiencies in 293T cells than 25 kDa PEI standard under serum-free and 10% serum conditions, respectively. Confocal laser scanning microscopy (CLSM) studies using Cy5-labeled DNA confirmed that these PEO-g-PEI copolymers could efficiently deliver DNA into the perinuclei region as well as into nuclei of 293T cells at an N/P ratio of 20/1 following 4 h transfection under 10% serum conditions. PEO-g-PEI polyplexes with superior colloidal stability, low cytotoxicity, and efficient transfection under serum conditions are highly promising for safe and efficient in vitro as well as in vivo gene transfection applications.